Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOELECTRIC EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

The Protocol Of KFM Characterization On Cross-section Of CdS/CdTe Thin Film Solar Cell

In this work, we report a series of Kelvin Force Microscopy (KFM) measurements, suitable to observe the topography and the contact potential difference (CPD) distribution of the following stack: CdTe/CdS/ITO/glass. The sample is prepared by mechanical polishing after cleavage to decrease the roughness. In order to have a better understanding of the charge transport inside the solar cell and to vary the Fermi level pinning effect, different bias are applied to the sample. The CPD variations with different bias on cross-section in dark condition are presented. We observe the reverse bias widens the CdTe/CdS depletion region. Under illumination, electron and holes are generated near the interface and varies the CPD distribution. Additionally, the chemical composition of each layer has been investigated by nano-Auger electron spectroscopy (AES). We observe the interdiffusion at the CdTe/CdS interface and determine the composition of the active layers to be CdTe/CdS{sub 0.7}Te{sub 0.3}.

14 SOLAR ENERGY↗

Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model

Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073–2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127–135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260–1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly efficient photovoltaic cells based on In{sub 0.53}Ga{sub 0.47} as alloys with isovalent doping

The effect of isovalent doping with P on the surface and bulk properties of the In{sub 0.53}Ga{sub 0.47}As alloy (below, InGaAs) was evaluated from variations in the photoluminescence and transmission spectra. It is established that isovalent doping decreases the nonradiative recombination rate in the bulk and on the surface of doped layers. The use of additional isovalent doping provided an improvement of parameters of the narrow-gap InGaAs-based solar cell used for the conversion of the concentrated solar radiation. The maximum efficiency of photovoltaic conversion in a spectral range of 900-1840 nm was 7.4-7.35% at a ratio of concentration of the solar radiation of 500-1000 for the AM1.5D Low AOD spectrum.

36 MATERIALS SCIENCE↗

Optimization on photoelectric detection based on stacked La{sub 0.9}Sr{sub 0.1}MnO{sub 3-{delta}}/LaAlO{sub 3-{delta}} multijunctions

Three multijunctions consisting of La{sub 0.9}Sr{sub 0.1}MnO{sub 3-{delta}} and LaAlO{sub 3-{delta}} on Si substrate have been fabricated under different oxygen pressures by laser molecular beam epitaxy. They exhibit nonlinear and rectifying current-voltage characteristics and evident photocurrent response to He-Ne laser illumination. Experimental results indicate that the periodically stacked multijunction grown under lower oxygen pressure shows a better rectification behavior and a higher photocurrent. The photovoltaic responsivities of the multijunctions are enhanced greatly at reverse bias and are much higher than that of a similarly grown single p-n junction. Based on the band structure of the multilayers, a possible mechanism of the photovoltaic process was proposed. A high photovoltage responsivity of 168.6 mV/mW has been achieved at - 6 V bias; this demonstrates the potential of the present multijunction configuration for photodetectors operating at room temperature.

36 MATERIALS SCIENCE↗

ON RELATIVISTIC DISK SPECTROSCOPY IN COMPACT OBJECTS WITH X-RAY CCD CAMERAS

X-ray charge-coupled devices (CCDs) are the workhorse detectors of modern X-ray astronomy. Typically covering the 0.3-10.0 keV energy range, CCDs are able to detect photoelectric absorption edges and K shell lines from most abundant metals. New CCDs also offer resolutions of 30-50 (E/{Delta}E), which is sufficient to detect lines in hot plasmas and to resolve many lines shaped by dynamical processes in accretion flows. The spectral capabilities of X-ray CCDs have been particularly important in detecting relativistic emission lines from the inner disks around accreting neutron stars and black holes. One drawback of X-ray CCDs is that spectra can be distorted by photon 'pile-up', wherein two or more photons may be registered as a single event during one frame time. We have conducted a large number of simulations using a statistical model of photon pile-up to assess its impacts on relativistic disk line and continuum spectra from stellar-mass black holes and neutron stars. The simulations cover the range of current X-ray CCD spectrometers and operational modes typically used to observe neutron stars and black holes in X-ray binaries. Our results suggest that severe photon pile-up acts to falsely narrow emission lines, leading to falsely large disk radii and falsely low spin values. In contrast, our simulations suggest that disk continua affected by severe pile-up are measured to have falsely low flux values, leading to falsely small radii and falsely high spin values. The results of these simulations and existing data appear to suggest that relativistic disk spectroscopy is generally robust against pile-up when this effect is modest.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance improvement of P3HT/TiO{sub 2} coaxial heterojunction polymer solar cells by introducing a CdS interface modifier

Coaxial heterojunction polymer solar cells consisting of vertical aligned crystalline TiO{sub 2} nanotube arrays transferred onto FTO-coated glass and ordered interpenetrating poly(3-hexylthiophene-2,5-diyl) (P3HT) have been fabricated through interface sensitization of CdS quantum dots on TiO{sub 2} nanotube walls. The performances of structurally identical polymer solar cells with and without CdS quantum dots sensitization were investigated and compared. The sensitized P3HT/CdS-TiO{sub 2} cell demonstrated an open-circuit photovoltage of 0.72 V and a short-circuit current of 8.29 mA/cm{sup 2} while the P3HT/TiO{sub 2} cell was 0.41 V and 5.64 mA/cm{sup 2}. The efficiency of this sensitized cell represents a more than four-fold improvement compared to the non-sensitized cell. By probing the charge transport characteristics at interfaces and the mechanism of photoelectric conversion, it is found the moderately interfacial CdS QDs plays the role of assisting charge separation and suppression of back recombination at interfaces, which accounts for the observed enhanced J{sub sc} and V{sub oc} in photovoltaic performance. - Graphical abstract: Schematic illustration of the Au/P3HT/CdS-TiO{sub 2}/FTO coaxial heterojunction polymer solar cell and its photovoltaic property compared with Au/P3HT/TiO{sub 2}/FTO cell. Highlights: Black-Right-Pointing-Pointer CdS QDs sensitized P3HT/TiO{sub 2} solid coaxial heterojunction solar cells are fabricated. Black-Right-Pointing-Pointer The V{sub oc} of such sensitized polymer solar cell reaches the value as high as 0.72 V. Black-Right-Pointing-Pointer 4.5 times higher PCE obtains as compared with the non-sensitized cell. Black-Right-Pointing-Pointer The dominate roles of CdS QDs sensitization on the PCE enhancement are investigated.

36 MATERIALS SCIENCE↗

Enhanced open voltage of BiFeO{sub 3} polycrystalline film by surface modification of organolead halide perovskite

Inorganic-organolead halide perovskite CH{sub 3}NH{sub 3}PbI{sub 3} modified BiFeO{sub 3} polycrystalline film has been established. The composite photoelectrode presents much larger open voltage and several magnitudes superior photoelectric conversion performance in comparison to the ordinary BiFeO{sub 3} polycrystalline film. The I-V curve shows that the short-circuit current (J{sub sc}) is 1.74 mA·cm{sup −2} and open-circuit voltage (V{sub oc}) is 1.62 V, the device's photon to current efficiency is over 1%. The large open voltage and high photovoltaic efficiency is believed to attributed to the spontaneous polarization of composite perovskite induced by BiFeO{sub 3} lattice and modified reduced work function of the modified BiFeO{sub 3} surface. Our results clearly show that the present BiFeO{sub 3}-CH{sub 3}NH{sub 3}PbI{sub 3} planar device is capable to generate a large voltage in macro scale under visible light, leading an approach to further applications on photodetectors and optoelectronic switch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Powder formation in SiH{sub 4}-H{sub 2} discharge in large area capacitively coupled reactors: A study of the combined effect of interelectrode distance and pressure

One of the main challenges for silicon thin film deposition for solar cell applications is to achieve high rate deposition in order to reduce the manufacturing costs. However, when silane and hydrogen are used as precursor gas in parallel plate plasma-enhanced chemical vapor deposition, high rate deposition is generally synonymous of powdery discharge. In this work, time- and space-resolved light scattering experiments are presented. These were performed in an industrial-type large area reactor with a variable interelectrode distance. Results show that with a standard 25 mm interelectrode distance, the fraction of silane transformed into powder can be as high as 50% and that reducing the interelectrode distance shifts to higher pressure the appearance of powder in the discharge. From a standard 25 mm interelectrode distance to a 10 mm narrow gap reactor, the threshold pressure was increased from 2 to 7 mbars. More generally, it is proposed that the onset of powder formation depends mainly on the product of the interelectrode distance and the gas residence time in the discharge.

36 MATERIALS SCIENCE↗

Multijunction GaInP/GaInAs/Ge solar cells with Bragg reflectors

Effect of subcell parameters on the efficiency of GaInP/Ga(In)As/Ge tandem solar cells irradiated with 1-MeV electrons at fluences of up to 3 x 10{sup 15} cm{sup -2} has been theoretically studied. The optimal thicknesses of GaInP and GaInAs subcells, which provide the best photocurrent matching at various irradiation doses in solar cells with and without built-in Bragg reflectors, were determined. The dependences of the photoconverter efficiency on the fluence of 1-MeV electrons and on the time of residence in the geostationary orbit were calculated for structures optimized to the beginning and end of their service lives. It is shown that the optimization of the subcell heterostructures for a rated irradiation dose and the introduction of Bragg reflectors into the structure provide a 5% overall increase in efficiency for solar cells operating in the orbit compared with unoptimized cells having no Bragg reflector.

36 MATERIALS SCIENCE↗

Modeling of the photodetector based on the multilayer graphene nanoribbons

Graphene nanoribbon (GNR), which has unique properties and advantages, is a crucial component of nanoelectornic devices, especially in the development of photoelectric detectors. In this work, an infrared photodetector based on the structure of stacked multiple-GNRs, which is separated by a little thick barrier layers (made of tungsten disulfide or related materials) to prevent tunneling current, is proposed and modeled. Operation of photoelectric detector is related to the electron cascaded radiative transition in the adjacent GNRs strengthened by the electrons heated due to the incident light. With a developed model, the working principle is analyzed and the relationships for the photocurrent and dark current as functions of the intensity of the incident radiation are derived. The spectral dependence of the responsivity and detectivity for graphene nanoribbons photodetector (GNRs-PT) with different Fermi energy, band gaps and numbers of GNRs layers are analyzed as well. The results demonstrate that the spectral characteristics depend on the GNRs band gap, which shows a potential on GNRs-PT application in the multi-wavelength systems. In addition, GNRs-PT has a better spectrum property and higher responsivity compared to photodetectors based on In{sub x}Ga{sub x}As in room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gamma-ray superconducting detector based on Abrikosov vortices: Principle of operation

The high atomic number of some superconducting elements such as niobium (Z=41) and tantalum (Z=73) and a high material thickness (e.g., t=300 mum) are emphasized as essential properties for development of a gamma-ray solid state detector with high intrinsic detection efficiency in the energy range up to 100 keV. To exploit these properties, a new detection principle based on the interaction of a single gamma-ray photon with Abrikosov vortex is proposed. The interaction of gamma-ray photon with a superconductor is discussed in terms of the photoelectric absorption and a hot-spot formation, the last acts as a short-time pinning center on an Abrikosov vortex and activates its motion, namely, a jump or damped vibration. Both types of vortex motion lead to variation (either static or dynamic) in the magnetic field on the absorber surface. The high sensitivity of the Josephson tunneling to weak magnetic field can be exploited for revealing the magnetic field variation and to make the readout of the detector. Main intrinsic properties of a gamma-ray detector based on Abrikosov vortices are evaluated, including the possibility to measure the energy deposited in the detector. A single Josephson tunnel junction configuration or a superconducting quantum interference device (SQUID) configuration is proposed and discussed as possible realization of working gamma-ray detector both in the counter operation mode and in the radiation spectroscopy operation mode.

36 MATERIALS SCIENCE↗

Surface segregation at the aluminum interface of poly(3-hexylthiophene)/fullerene solar cells

The effects of thermal annealing before and after Al deposition on poly(3-hexylthiophene) (P3HT)/[6,6]-phenyl-C{sub 61} butyric acid methyl ester (PCBM) blend solar cells were investigated by current density-voltage measurements and x-ray photoelectron spectroscopy (XPS). Compared to the preannealed device, the postannealed device exhibited enhanced open-circuit voltage (V{sub OC}), which is ascribed to the decrease in the reverse saturation current density J{sub 0}. The XPS measurements demonstrated that P3HT is dominant at the Al interface in the preannealed device while PCBM is instead dominant in the postannealed device. This surface-segregated PCBM formed in the postannealed device can serve as a hole-blocking layer at the Al interface to reduce J{sub 0}, and therefore improve V{sub OC}.

36 MATERIALS SCIENCE↗

Thermally exfoliated graphene based counter electrode for low cost dye sensitized solar cells

Graphene obtained from thermal exfoliation of graphite oxide are highly wrinkled and have large surface area. Their wrinkled nature is expected to give them excellent catalytic activity. Herein, we demonstrate the use of thermally exfoliated graphene (TEG) as cost effective electrocatalyst for the tri-iodide reduction in dye sensitized solar cells (DSSCs). X-ray diffraction, Raman and Infra red spectroscopy and electron microscopy studies confirm the defective and wrinkled nature of TEG. BET surface area measurement show a large surface area of {approx} 470 m{sup 2}/g. The counter electrode was fabricated by drop casting a slurry of TEG dispersed in a Nafion:Ethanol solution on fluorine doped tin oxide (FTO) substrates. The use of Nafion prevented film ''peel off,'' thus ensuring a good substrate adhesion. Electrochemical impedance spectroscopy reveals that TEG had a catalytic performance comparable to that of Pt, suggesting its use as counter electrode material. As expected, the DSSC fabricated with Nafion solubilized TEG/FTO as counter electrode shows an efficiency of about 2.8%, comparable to Pt counter electrode based DSSC which has an efficiency of about 3.4%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoelectric and luminescence properties of GaSb-Based nanoheterostructures with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown by metalorganic vapor-phase epitaxy

The luminescence and photoelectric properties of heterostructures with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown on n-GaSb substrates by metalorganic vapor-phase epitaxy are investigated. Intense superlinear luminescence and increased optical power as a function of the pump current in the photon energy range of 0.6-0.8 eV are observed at temperatures of T = 77 and 300 K. The photoelectric, current-voltage, and capacitance characteristics of these heterostructures are studied in detail. The photosensitivity is examined with photodetectors operating in the photovoltaic mode in the spectral range of 0.9-2.0 {mu}m. The sensitivity maximum at room temperature is observed at a wavelength of 1.55 {mu}m. The quantum efficiency, detectivity, and response time of the photodetectors were estimated. The quantum efficiency and detectivity at the peak of the photosensitivity spectrum are as high as {eta} = 0.6-0.7 and D{sub {lambda}max}{sup *} = (5-7) Multiplication-Sign 10{sup 10} cm Hz{sup 1/2} W{sup -1}, respectively. The photodiode response time determined as the rise time of the photoresponse pulse from 0.1 to the level 0.9 is 100-200 ps. The photodiode transmission bandwidth is 2-3 GHz. Photodetectors with a deep Al(As)Sb/InAsSb/Al(As)Sb quantum well grown on n-GaSb substrates are promising foruse in heterodyne detection systems and in information technologies.

36 MATERIALS SCIENCE↗

Photovoltaic detector based on type II heterostructure with deep AlSb/InAsSb/AlSb quantum well in the active region for the midinfrared spectral range

Photodetectors for the spectral range 2-4 {mu}m, based on an asymmetric type-II heterostructure p-InAs/AlSb/InAsSb/AlSb/(p, n)GaSb with a single deep quantum well (QW) or three deep QWs at the heterointerface, have been grown by metal-organic vapor phase epitaxy and analyzed. The transport, luminescent, photoelectric, current-voltage, and capacitance-voltage characteristics of these structures have been examined. A high-intensity positive and negative luminescence was observed in the spectral range 3-4 {mu}m at high temperatures (300-400 K). The photosensitivity spectra were in the range 1.2-3.6 {mu}m (T = 77 K). Large values of the quantum yield ({eta} = 0.6-0.7), responsivity (S{sub {lambda}} = 0.9-1.4 A W{sup -1}), and detectivity (D*{sub {lambda}} = 3.5 Multiplication-Sign 10{sup 11} to 10{sup 10} cm Hz{sup 1/2} W{sup -1}) were obtained at T = 77-200 K. The small capacitance of the structures (C = 7.5 pF at V = -1 V and T = 300 K) enabled an estimate of the response time of the photodetector at {tau} = 75 ps, which corresponds to a bandwidth of about 6 GHz. Photodetectors of this kind are promising for heterodyne detection of the emission of quantum-cascade lasers and IR spectroscopy.

36 MATERIALS SCIENCE↗

Standard Giant Branches in the Washington Photometric System

We have obtained CCD photometry in the Washington system C, T(sub 1) filters for some 850,000 objects associated with 10 Galactic globular clusters and 2 old open clusters. These clusters have well-known metal abundances, spanning a metallicity range of 2.5 dex from [Fe/H] approx -2.25 to +0.25 at a spacing of approx. 0.2 dex. Two independent observations were obtained for each cluster and internal checks, as well as external comparisons with existing photoelectric photometry, indicate that the final colors and magnitudes have overall uncertainties of 0.03 mag. Analogous to the method employed by Da Costa and Armandroff for V, I photometry , we then proceed to construct standard ((M(sub T),(C - T(sub 1))(sub 0)) giant branches for these clusters adopting the Lee et distance scale, using some 350 stars per globular cluster to define the giant branch. We then determine the metallicity sensitivity of the ((C - T(sub 1))(sub 0) color at a given M((sub T)(sub 1)) value. The Washington system technique is found to have three times the metallicity sensitivity of the V, I technique. At M((sub T)(sub 1)) = -2 (about a magnitude below the tip of the giant branch, roughly equivalent to M(sub I) = -3), the giant branches of 47 Tuc and M15 are separated by 1.16 magnitudes in (V - l)(sub 0) and only 0.38 magnitudes in (V - I)(sub 0). Thus, for a given photometric accuracy, metallicities can be determined three times more precisely with the Washington technique. We find a linear relationship between (C - T(sub l)(sub 0) (at M(sub T)(sub 1) = -2) and metallicity exists over the full metallicity range, with an rms of only 0.04 dex. We also derive metallicity calibrations for M(sub T)(sub 1) = -2.5 and -1.5, as well as for two other metallicity scales. The Washington technique retains almost the same metallicity sensitivity at faint magnitudes , and indeed the standard giant branches are still well separated even below the horizontal branch. The photometry is used to set upper limits in the range 0.03 - 0.09 dex for any intrinsic metallicity dispersion in the calibrating clusters. The calibrations are applicable to objects with ages approx. greater than 5 Gyr - any age effects are small or negligible for such objects. This new technique is found to have many advantages over the old two-color diagram technique for deriving metallicities from Washington photometry. In addition to only requiring 2 filters instead of 3 or 4, the new technique is generally much less sensitive to reddening and photometric errors, and the metallicity sensitivity is many times higher. The new technique is especially advantageous for metal-poor objects. The five metal-poor clusters determined by Geisler et al., using the old technique, to be much more metal-poor than previous indications, yield metallicities using the new technique which are in excellent agreement with the Zinn scale.

Geisler, Doug↗

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) using plasma deposited BN as gate dielectric

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) were fabricated on Si substrates with a 10 nm boron nitride (BN) layer as a gate dielectric deposited by electron cyclotron resonance microwave plasma chemical vapor deposition. The material characterization of the BN/GaN interface was investigated by X-ray photoelectric spectroscopy (XPS) and UV photoelectron spectroscopy. The BN bandgap from the B1s XPS energy loss is ~5 eV consistent with sp2 bonding. The MISHEMTs exhibit a low off-state current of 1 × 10 –8 mA/mm, a high on/off current ratio of 10 9 , a threshold voltage of –2.76 V, a maximum transconductance of 32 mS/mm at a gate voltage of –2.1 V and a drain voltage of 1 V, a subthreshold swing of 69.1 mV/dec, and an on-resistance of 12.75 Ω·mm. The interface state density (D it ) is estimated to be less than 8.49 × 10 11 cm –2 eV –1 . Gate leakage current mechanisms were investigated by temperature-dependent current–voltage measurements from 300 K to 500 K. The maximum breakdown electric field is no less than 8.4 MV/cm. Poole–Frenkel emission and Fowler–Nordheim tunneling are indicated as the dominant mechanisms of the gate leakage through the BN gate dielectric at low and high electric fields, respectively.

36 MATERIALS SCIENCE↗

An Automated Flying-Insect Detection System

An automated flying-insect detection system (AFIDS) was developed as a proof-of-concept instrument for real-time detection and identification of flying insects. This type of system has use in public health and homeland-security decision support, agriculture and military pest management, and/or entomological research. Insects are first lured into the AFIDS integrated sphere by insect attractants. Once inside the sphere, the insect s wing beats cause alterations in light intensity that is detected by a photoelectric sensor. Following detection, the insects are encouraged (with the use of a small fan) to move out of the sphere and into a designated insect trap where they are held for taxonomic identification or serological testing. The acquired electronic wing-beat signatures are preprocessed (Fourier transformed) in real time to display a periodic signal. These signals are sent to the end user where they are graphically. All AFIDS data are preprocessed in the field with the use of a laptop computer equipped with LabVIEW. The AFIDS software can be programmed to run continuously or at specific time intervals when insects are prevalent. A special DC-restored transimpedance amplifier reduces the contributions of low-frequency background light signals, and affords approximately two orders of magnitude greater AC gain than conventional amplifiers. This greatly increases the signal-to-noise ratio and enables the detection of small changes in light intensity. The AFIDS light source consists of high-intensity Al-GaInP light-emitting diodes (LEDs). The AFIDS circuitry minimizes brightness fluctuations in the LEDs and when integrated with an integrating sphere, creates a diffuse uniform light field. The insect wing beats isotropically scatter the diffuse light in the sphere and create wing-beat signatures that are detected by the sensor. This configuration minimizes variations in signal associated with insect flight orientation. Preliminary data indicate that AFIDS has sufficient sensitivity and frequency measuring capability to differentiate between male and female mosquitoes (Figure 1, bottom panel) and fruit flies (data not shown). Similar studies show that AFIDS can be utilized to detect discrete differences between two mosquito species, Aedes aegypti and Aedes albopictus. When fully deployable, a wireless network of AFIDS monitors could be used in combination with other remotely sensed data and visually displayed in a geographic information system (GIS) to provide real-time surveillance (see Figure 2). More accurate and sensitive insect population forecasts and effective rapid response and mitigation of insect issues would then be possible.

Vann, Timi↗