Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Electric field measurements of DC and long wavelength structures associated with sporadic-E layers and QP radar echoes

Electric field and plasma density data gathered on a sounding rocket launched from Uchinoura Space Center, Japan, reveal a complex electrodynamics associated with sporadic-E layers and simultaneous observations of quasiperiodic radar echoes. The electrodynamics are characterized by spatial and temporal variations that differed considerably between the rocket's up-leg and down-leg traversals of the lower ionosphere. Within the main sporadic-E layer (95- 110 km) on the up-leg, the electric fields were variable, with amplitudes of 2 4 mV1m that changed considerably within altitude intervals of 1-3 km. The identification of polarization electric fields coinciding with plasma density enhancements and/or depletions is not readily apparent. Within this region on the down-leg, however, the direction of the electric field revealed a marked change that coincided precisely with the peak of a single, narrow sporadic-E plasma density layer near 102.5 km. This shear was presumably associated with the neutral wind shear responsible for the layer formation. The electric field data above the sporadic-E layer on the upleg, from 110 km to the rocket apogee of 152 km, revealed a continuous train of distinct, large scale, quasi-periodic structures with wavelengths of 10-15 km and wavevectors oriented between the NE-SW quadrants. The electric field structures had typical amplitudes of 3-5 mV/m with one excursion to 9mV/m, and in a very general sense, were associated with perturbations in the plasma density. The electric field waveforms showed evidence for steepening and/or convergence effects and presumably had mapped upwards along the magnetic field from the sporadic-E region below.

Pfaff, R.↗
DOE OSTI2025

Experiments to validate Thermodynamics and Transport models of Strongly Coupled Dusty Plasma Matter (Final Technical Report for DE-SC0023416)

The goal of this two-year grant is to provide access to the PI to dusty plasma experimental facilities at the DOE-funded Collaborative Research Facility Magnetized Plasma Research Laboratory, Auburn University to become a user of that facility, to obtain experimental data to support another ongoing grant DE-SC0021146 (an Early Career Award to the PI that is focused on modeling of dusty plasma thermodynamics and transport processes), to generate experimental data for funding proposals, and to provide exposure to University of Memphis students to advanced experimental techniques. The following technical accomplishments were made: 1. Development of a novel Bidirectional Electrode Control Arms Assembly (BECAA) for producing perfect 2D grain layers for complex plasma experimentation. BECAA uses movable electrode arms to tilt or move the electrode in a RF discharge from outside the chamber, allowing for the manipulation of grain clouds without needing to change the plasma parameters or gas pressure. This work addresses a longstanding gap in the literature for a method to produce clusters of selectable number of grains and that are perfectly two dimensional as opposed to being only quasi-2D. 2. Experimental investigation of the structural properties of finite-N clusters with N=2 to 50. Individual particle behavior in clusters could vary from grain to grain and this study measured systematically produced clusters for two different grain sizes. Analysis (funded by another grant DE-SC0021146) is currently underway to quantify the differences between grains that are found on the surface vs. the interior of clusters, the shell structure, and the decay of correlations in position, velocity, and kinetic energy. 3. An experimental method to measure the structural entropy of clusters was developed by observing the self-induced structural transitions between various possible arrangements. In a series of heating and cooling cycles, the number of times each possible arrangement was attained was experimentally observed and used to compute the probability of existence of that arrangement, and subsequently the configurational entropy of the cluster. Analysis (funded by another grant DE-SC0021146) is currently underway to produce the entropy of clusters as a function of the number of grains and use the same to compute thermodynamic state variables for 2D complex plasma/grain clusters. 4. A preliminary experimental study of multibody collisions between N grains (N=2 – 10) was conducted. The clusters were produced using the BECAA technique and velocities were imparted to the grains using manipulation laser pulses. Analysis (funded by another grant DE-SC0021146) is currently underway to develop a theoretical framework to describe multibody collisions analogous to classical two-body interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Reconfigurable plasma-dielectric hybrid photonic crystal as a platform for electromagnetic wave manipulation and computing

The introduction of 3D printing has enabled fabrication of photonic crystal devices with complex crystal structures that would be challenging to construct using other fabrication methods. In this paper, we construct and characterize a photonic crystal consisting of two 4 x 8 x 8 cubic lattices composed of spherical silicon nitride elements straddling a layer of 8 plasma discharge tubes, creating a 3D hybrid plasma photonic crystal device. Integrating under-dense gaseous plasma elements provides a unique coupling dynamic between the dielectric spheres and the cylindrical plasma discharges, creating a monolithic hybrid photonic crystal with solid state and reconfigurable elements. The device has resonant modes that have attenuation peaks that are either switchable, tunable in amplitude, or tunable in frequency with variations in plasma density. The response of these bands seen with varying plasma density is confirmed through simulations when effects due to the heating of the photonic crystal from the gaseous plasma elements are accounted for in the experiments. We discuss how this reconfigurable device may be used and expanded upon for applications in photonic artificial neural networks and optical computing systems.

3D printing↗
DOE OSTI2022

Fascinating physics at the edge of magnetic fusion devices

Abstract The physics of the processes at the edge of magnetic fusion devices is multifaceted and exhibits complex, nonlinear synergistic effects. Even though this region occupies only a small portion of the whole device, it plays a crucial role in overall plasma confinement, heat exhaust, and plasma–wall interactions. The latter affects not only the performance but also the lifetime of plasma-facing components and therefore remains an outstanding challenge for future fusion reactors. At the edge of fusion devices, researchers are dealing with phenomena including classical and anomalous plasma transport, atomic physics effects, and physics of plasma-facing material under strong irradiation by particle and energy fluxes. The diversity of edge physics makes it particularly attractive for young scientists. Working in this field, they can find endless possibilities to demonstrate their talents and creativity. This short review describes just some of the basic scrape-off layer and divertor plasma phenomena including divertor plasma detachment, intermittent bursts of anomalous cross-field plasma transport, plasma–material interactions, and dust in fusion plasmas, which are of particular interest in relation to fusion reactors.

Physics↗
NASA NTRS1984

Plasma waves at and near the neutral sheet

The ISEE 1 and 2 plasma wave observations in the geomagnetic tail in the vicinity of neutral sheet crossings are reported. The relevance of the plasma wave observations to the magnetic field, plasma, and energetic particle observations is considered. Broadband electrostatic noise and low frequency electromagnetic bursts are characteristic of the plasma sheet boundary layer and regions near the neutral sheet especially in the presence of strong flows, fluctuationg currents and sharp gradients in the fluxes of few keV electrons and protons. However, exactly at the neutral sheet most wave intensities decrease dramatically and this observation has important implications for theories requiring anomalous resistivity from plasma turbulence at the neutral sheet.

Anderson, R. R.↗
DOE OSTI2024

Principles of two-dimensional terahertz spectroscopy of collective excitations: The case of Josephson plasmons in layered superconductors

Two-dimensional terahertz spectroscopy (2DTS), a terahertz analog of nuclear magnetic resonance, is a new technique poised to address many open questions in complex condensed matter systems. The conventional theoretical framework used ubiquitously for interpreting multidimensional spectra of discrete quantum level systems is, however, insufficient for the continua of collective excitations in strongly correlated materials. Here, in this work, we develop a theory for 2DTS of a model collective excitation, the Josephson plasma resonance in layered superconductors. Starting from a mean-field approach at temperatures well below the superconducting phase transition, we obtain expressions for the multidimensional nonlinear responses that are amenable to intuition derived from the conventional single-mode scenario. We then consider temperatures near the superconducting critical temperature T c , where dynamics beyond mean-field become important and conventional intuition fails. As fluctuations proliferate near T c , the dominant contribution to nonlinear response comes from an optical parametric drive of counterpropagating Josephson plasmons, which gives rise to 2D spectra that are qualitatively different from the mean-field predictions. As such, and in contrast to one-dimensional spectroscopy techniques, such as third harmonic generation, 2DTS can be used to directly probe thermally excited finite-momentum plasmons and their interactions. Our theory can readily be tested in cuprates, and we discuss implications beyond the present context of Josephson plasmons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1989

Plasma and energetic electron flux variations in the Mercury 1 C event - Evidence for a magnetospheric boundary layer

Charge-particle and magnetic-field data obtained during the first encounter (on March 29, 1974) of Mariner 10 with the planet Mercury are reexamined, and a new interpretation of the Mariner 10 energetic electron, plasma electron, and magnetic field data near the outbound magnetopause at Mercury is presented. It is shown that Mariner 10 sampled the hot substorm energized magnetospheric plasma sheet for the first 36 sec of the C event and, for the next 48 sec, alternatively sampled hot (plasma sheet) and cold (boundary-layer magnetosheathlike) plasma regions. It is argued that the counting rate of the ID1 event (i.e., a particle event triggering detector D1 but not the D2, D3, or D7 detectors) throughout the C event most probably represents a pulse pileup response to about 35-175 keV electrons, rather than the nominal above-175 keV electrons presumed in the earlier interpretations.

Christon, S. P.↗
NASA NTRS1983

Thermal and electrical interaction of tantalum with a low temperature chemically active plasma flow

The paper deals with an experimental study of radiative heat transfer and charge transfer processes from the surface of tantalum plates under conditions of unsteady high-temperature heating and oxidation. It is shown that at plate temperatures of 1800 K, the heat flux may be as high as 400 kW/sq m. Heating is shown to stimulate the emissivity of tantalum and the temperature of the free electrons which surface, through a gas boundary layer, from the plasma onto the metal.

Zake, M. V.↗
NASA NTRS1993

Dispersed ion structures at the poleward edge of the auroral oval: Low-altitude observations and numerical modeling

We have compared the AUREOL 3 (A3) observations of auroral ion precipitation, particularly ion beams, with the results from the global kinetic model of magnetotail plasma of Ashour-Abdalla et al. (1993). We have identified 101 energetic keV H(+) velocity dispersed precipitating ion structures (VDIS) with fluxes above 10(exp -3) ergs./sq cm./s in the A3 record between the end of 1981 and mid-1984. These beams display a systematic increase in energy with increasing latitude and were observed in a narrow region within less than 1 deg in latitude of the polar cap boundary. The VDIS are the most distinctive feature in the auroral zone of the plasma sheet boundary layer. We report first on a statistical analysis of the possible ralationships between magnetic activity or substorm phase and the VDIS properties. Our particle simulations of the precipitating ions have been extended by using a series of modified versions of the Tsyganenko (1989) magnetic field model and by varying the cross-magnetosphere electric field. In the simulations, plasma from a mantle source is subject to strong nonlinear acceleration, forming beams which flow along the PSBL. Only 3 to 4% of these beams precipitate into the ionosphere to form the VDIS while the majority return to the equatorial plane after mirroring and form the thermalized central plasma sheet. The final energy and the dispersion of the beams in the model depend on the amplitude of the cross-tail electric field. Two unsual observations of low-energy (less than 5 keV) O(+) VDIS, shifted by 4 deg 5 deg in invariant latitude equatorward of H(+) VDIS are analyzed in detail. The sparsity of such O(+) events and the absence of the changes in the flux and frequency of occurrence indicate a solar wind origin for the plasma. Finally, large-scale kinetic modeling, even with its simplifications and assumptions (e.g., static magnetic field, solar wind source), reproduces low-altitude auroral ion features fairly well; it may therefore be presented as an appropriate framework into which data on energization and transport of the hot plasma, obtained in the equatorial plane, could be inserted in the near future.

Bosqued, J. M.↗
NASA NTRS1978

Development of a plasma sprayed ceramic gas path seal for high pressure turbine application

Development of the plasma sprayed graded, layered ZRO2/CoCrAlY seal system for gas turbine engine blade tip seal applications up to 1589 K (2400 F) surface temperature was continued. The effect of changing ZRO2/CoCrAlY ratios in the intermediate layers on thermal stresses was evaluated analytically with the goal of identifying the materials combinations which would minimize thermal stresses in the seal system. Three methods of inducing compressive residual stresses in the sprayed seal materials to offset tensile thermal stresses were analyzed. The most promising method, thermal prestraining, was selected based upon potential, feasibility and complexity considerations. The plasma spray equipment was modified to heat, control and monitor the substrate temperature during spraying. Specimens were fabricated and experimentally evaluated to: (1) substantiate the capability of the thermal prestrain method to develop compressive residual stresses in the sprayed structure and (2) define the effect of spraying on a heated substate on abradability, erosion and thermal shock characteristics of the seal system. Thermal stress analysis, including residual stresses and material properties variations, was performed and correlated with thermal shock test results. Seal system performance was assessed and recommendations for further development were made.

Shiembob, L. T.↗
DOE OSTI2025

Quadrilateral particle arrangement within shocks in a two-dimensional dusty plasma

The microscopic structure within a two-dimensional shock was studied using data from a dusty plasma experiment. A single layer of charged microparticles, levitated in a glow-discharge plasma, was perturbed by an electrically floating wire that was moved at a steady supersonic speed to excite a compressional shock. A rearrangement of particles was observed, from a hexagonal lattice in the preshock into a quadrilateral microstructure on the front side of the shock. This quadrilateral structure would not be stable in a monolayer of identical repulsive particles, under equilibrium conditions. Glaser-Clark polygon analysis of the microstructure helped in identifying quadrilaterals. Voronoi analysis was used to characterize the defect fraction behind the shock, as an indication of shock-induced melting. Published by the American Physical Society 2025

Kananovich, Anton (ORCID:0000000225374952)↗
NASA NTRS1986

Plasma wave observations at comet Giacobini-Zinner

The plasma wave instrument on the International Cometary Explorer (ICE) detected strong ion acoustic waves together with electromagnetic whistlers and low-level electron plasma oscillations when the spacecraft was within two million km of the nucleus of comet Giacobini-Zinner. As ICE approached the anticipated bow-shock location, electromagnetic and electrostatic wave levels increased significantly, but even amidst this turbulence, the wave instrument detected structures with familiar bow shock characteristics that were correlated with observations of localized electron heating phenomena. Just beyond the visible coma, high-amplitude broadband waves were detected accounting for the significant electron heating observed in this region. Near closest approach, broadband electrostatic noise was detected together with a changing pattern of weak electron plasma oscillations that yielded a density profile for the outer layers of the cold plasma tail. Near the tail axis, the plasma wave instrument also detected a nonuniform flux of dust impacts, and a preliminary profile of the Giacobini-Zinner dust distribution for micrometer-sized particles is presented.

Scarf, F. L.↗
NASA NTRS1984

Some contributions to knowledge of the magnetospheric plasma by ISEE investigators

The ISEE project has made substantial contributions to the knowledge of the magnetosphere during the period of the IMS, especially in the discipline of Space Plasma Physics. Results obtained during approximately the first two years of the operation of ISEE-1 and -2, and touches on relevant results of ISEE-3 are reviewed. The ability to control the separation between ISEE-1 and -2, which are in nearly identical orbits, has permitted study of the motion and structure of the bow shock and magnetopause, the boundary layers, and the plasma sheet. Much evidence was obtained favoring the existence of reconnection and its relevance to the transfer of magnetic flux from the frontside to the rear of the magnetosphere, although not everyone agrees that it is the only important process. The presence of both reflected and accelerated particles was shown to lead to the development of a foreshock region between the bow shock and the interplanetary magnetic field line tangential to it.

Ogilvie, K. W.↗
NASA NTRS1990

CDAW 7 revisited - Further evidence for the creation of a near-earth substorm neutral line

Eastman et al. (1988) have interpreted the CDAW 7 substorm of April 24, 1979, previously taken as unambiguously supporting the near-earth neutral line model of magnetospheric substorms, in terms of spatial movements of a preexisting plasma-sheet boundary layer (PSBL) and its associated current sheets across the observing ISEE 1 and 2 spacercraft. It is presently noted that, by contrast, a reinvestigation of ISEE 1 and 2 energetic particle measurements around substorm onset on short time-scales shows the observed flux pattern to require the formation of a particle source eastward of the ISEE spacecraft, well within the plasma sheet, associated with the substorm onset. Strong flows were absent prior to substorm onset, indicating the temporal nature of the event, as opposed to an encounter with a preexisting PSBL containing large flows.

Kettmann, G.↗
DOE OSTI2021

Scattering of radiofrequency waves by randomly modulated density interfaces in the edge of fusion plasmas

In the scrape-off layer and the edge region of a tokamak, the plasma is strongly turbulent and scatters the radiofrequency (RF) electromagnetic waves that propagate through this region. It is important to know the spectral properties of these scattered RF waves, whether used for diagnostics or for heating and current drive. The spectral changes influence the interpretation of the obtained diagnostic data, and the current and heating profiles. A full-wave, three-dimensional (3-D) electromagnetic code ScaRF has been developed for studying the RF wave propagation through turbulent plasma. ScaRF is a finite-difference frequency-domain (FDFD) method used for solving Maxwell's equations. The magnetized plasma is defined through the cold plasma by the anisotropic permittivity tensor. As a result, ScaRF can be used to study the scattering of any cold plasma RF wave. It can also be used for the study of the scattering of electron cyclotron waves in ITER-type and medium-sized tokamaks such as TCV, ASDEX-U and DIII-D. For the case of medium-sized tokamaks, there is experimental evidence that drift waves and rippling modes are present in the edge region. Hence, we have studied the scattering of RF waves by periodic density interfaces (plasma gratings) in the form of a superposition of spatial modes with varying periodicity and random amplitudes. The power reflection coefficient (a random variable) is calculated for different realizations of the density interface. In this work, the uncertainty of the power reflection coefficient is rigorously quantified by use of the Polynomial Chaos Expansion method in conjunction with the Smolyak sparse-grid integration, which is known as the PCE-SG method. The PCE-SG method is proven to be accurate and more efficient compared with alternative methods such as the Monte Carlo (MC) approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Scattering of radio frequency waves by randomly modulated density interfaces in the edge of fusion plasmas

In the scrape-off layer and the edge region of a tokamak, the plasma is strongly turbulent and scatters the radio frequency (RF) electromagnetic waves that propagate through this region. It is important to know, whether used for diagnostics or for heating and current drive, the spectral properties of these scattered RF waves. The spectral changes influences the interpretation of the diagnostic-data obtained and the current and heating profiles. A full-wave, 3D electromagnetic code ScaRF (see Papadopoulos et al. 2019) has been developed for studying the RF wave propagation through turbulent plasma. ScaRF is a finite-difference frequency-domain (FDFD) method for solving Maxwell's equations. The magnetized plasma is defined through the cold plasma, anisotropic permittivity tensor. As a result, ScaRF can be used to study the scattering of any cold plasma RF wave. It can be for the study of scattering of electron cyclotron waves in ITER-type and medium-sized tokamaks such as TCV, ASDEX-U, DIII-D. For the case of medium-sized tokamaks, there's experimental evidence that drift waves and rippling modes are present in the edge region (see Ritz et al. 1984). Hence, we study the scattering of RF waves by periodic density interfaces (plasma gratings) in the form of a superposition of spatial modes with varying periodicity and random amplitudes (see Papadopoulos et al. 2019). The power reflection coefficient (a random variable) is calculated for different realizations of the density interface. In this work, the uncertainty of the power reflection coefficient is rigorously quantified by use of the Polynomial Chaos Expansion (see Xiu & Karniadakis 2002) method in conjunction with the Smolyak sparse grid integration (see Papadopoulos et al. 2018) (PCE-SG). The PCE-SG method is proven accurate and much more efficient (roughly 2-orders of magnitude shorter execution time) compared to alternative methods such as the Monte Carlo (MC) approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Structure and dynamics of the Uranian magnetotail - Results from hot plasma and magnetic field observations

Analysis of Voyager 2 low-energy charged particle and magnetic field data in the Uranian magnetotail show that this system has many features similar to those seen at earth. Isotropization of core magnetosphere 28-43 keV ions has been observed at the trapping boundary upon entry into the magnetotail near L = 17, an effect seen in ion populations at earth and attributed to neutral sheet scattering. An extensive and persistent plasma sheet boundary layer is found to contain field-aligned ion streams with a variety of angular and energetically dispersive effects. Streaming distributions in the magnetotail horn region map to the auroral emission region observed by the Voyager ultraviolet spectrometer. A quiet-time near-tail region is distinguished from a distant disturbed region, where evidence of a substorm is observed. There is evidence suggesting that the distant plasma sheet is not corotating with the planet.

Kane, M.↗