SEARCH · Search NASA

Results for “Path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Measurement of the Low-Energy Electron Inelastic Mean Free Path in Monolayer Graphene

Measuring the electron-transport properties of substrate-supported nanomaterials with the traditional two-point comparison method is difficult at electron energies below 50 eV, where core-level signals are too feeble to be detected against the strong secondary-electron background. Herein, a data-driven spectral analysis technique is used to study the low-energy electron-transport properties of substrate-supported target nanomaterials, while eliminating the influence of the substrate signal. Applying this technique, the electron-transport properties of the effective attenuation length and the inelastic mean free path (IMFP) can be determined with extremely high efficiency over the entire measured energy range of 6–600 eV. Further, these results show excellent agreement with other experimental and theoretical results. In this work, significant differences are observed between monolayer graphene and the bulk graphite IMFP, which illustrates the importance of the nanometer effect in the electron-transport properties of the material. Furthermore, this technique is readily applicable to any ultrathin material that can be transferred onto a polycrystalline gold substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Path integral Monte Carlo and density functional molecular dynamics simulations of warm dense MgSiO 3

In order to provide a comprehensive theoretical description of MgSiO 3 at extreme conditions, we combine results from path integral Monte Carlo and density functional molecular dynamics simulations and generate a consistent equation of state for this material. We consider a wide range of temperature and density conditions from 10 4 to 10 8 K and from 0.321 to 64.2 g/cm -3 (0.1- to 20-fold the ambient density). We study how the L and K shell electrons are ionized with increasing temperature and pressure. We derive the shock Hugoniot curve and compare with experimental results. Our Hugoniot curve is in good agreement with the experiments, and we predict a broad compression maximum that is dominated by the K shell ionization of all three nuclei while the peak compression ratio of 4.70 is obtained when the Si and Mg nuclei are ionized. To conclude, we analyze the heat capacity and structural properties of the liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Stability and distortion of fcc LaH 10 with path-integral molecular dynamics

The synthesis of the high-temperature superconductor LaH 10 requires pressures in excess of 100 GPa, wherein it adopts a face-centered cubic structure. Upon decompression, this structure undergoes a distortion, which still supports superconductivity, but with a lower critical temperature. Previous calculations have shown that quantum and anharmonic effects are necessary to stabilize the cubic structure, but have not resolved the low pressure distortion. Using large scale path-integral molecular dynamics enabled by a machine learned potential, we show that a rhombohedral distortion appears at sufficiently low pressures. Here, we also highlight the importance of quantum zero-point motion in stabilizing the cubic structure.

08 HYDROGEN↗

DOE OSTI2015

Excitonic effects in two-dimensional semiconductors: Path integral Monte Carlo approach

The most striking features of novel two-dimensional semiconductors (e.g., transition metal dichalcogenide monolayers or phosphorene) is a strong Coulomb interaction between charge carriers resulting in large excitonic effects. In particular, this leads to the formation of multicarrier bound states upon photoexcitation (e.g., excitons, trions, and biexcitons), which could remain stable at near-room temperatures and contribute significantly to the optical properties of such materials. In our work we have used the path integral Monte Carlo methodology to numerically study properties of multicarrier bound states in two-dimensional semiconductors. Specifically, we have accurately investigated and tabulated the dependence of single-exciton, trion, and biexciton binding energies on the strength of dielectric screening, including the limiting cases of very strong and very weak screening. Our results of this work are potentially useful in the analysis of experimental data and benchmarking of theoretical and computational models.

2D semiconductor, exciton, trion, biexciton, quant↗

DOE OSTI2016

Variational approach to extracting the phonon mean free path distribution from the spectral Boltzmann transport equation

The phonon Boltzmann transport equation (BTE) is a powerful tool for studying nondiffusive thermal transport. Here, we develop a new universal variational approach to solving the BTE that enables extraction of phonon mean free path (MFP) distributions from experiments exploring nondiffusive transport. By utilizing the known Fourier heat conduction solution as a trial function, we propose a direct approach to calculating the effective thermal conductivity from the BTE. We reveal this technique on the transient thermal grating experiment, which is a useful tool for studying nondiffusive thermal transport and probing the MFP distribution of materials. We obtain a closed form expression for a suppression function that is materials dependent, successfully addressing the nonuniversality of the suppression function used in the past, while providing a general approach to studying thermal properties in the nondiffusive regime.

42 ENGINEERING↗

DOE OSTI2017

First-principles mode-by-mode analysis for electron-phonon scattering channels and mean free path spectra in GaAs

We present a first-principles framework to investigate the electron scattering channels and transport properties for polar materials by combining the exact solution of the linearized electron-phonon (e-ph) Boltzmann transport equation in its integral-differential form associated with the e-ph coupling matrices obtained from the polar Wannier interpolation scheme. No ad hoc parameter is required throughout this calculation, and GaAs, a well-studied polar material, is used as an example to demonstrate this method. In this work, the long-range and short-range contributions as well as the intravalley and intervalley transitions in the e-ph interactions (EPIs) have been quantitatively addressed. Promoted by such mode-by-mode analysis, we find that in GaAs, the piezoelectric scattering is comparable to deformation-potential scattering for electron scatterings by acoustic phonons in EPI even at room temperature, and it makes a significant contribution to mobility. Furthermore, we achieved good agreement with experimental data for the mobility, and we identified that electrons with mean free paths between 130 and 210 nm provide the dominant contribution to the electron transport at 300 K. As a result, such information provides a deeper understanding of the electron transport in GaAs, and the presented framework can be readily applied to other polar materials.

36 MATERIALS SCIENCE↗

DOE OSTI2021

State densities of heavy nuclei in the static-path plus random-phase approximation

We report that nuclear state densities are important inputs to statistical models of compound-nucleus reactions. State densities are often calculated with self-consistent mean-field approximations that do not include important correlations and must be augmented with empirical collective enhancement factors. Here, we benchmark the static-path plus random-phase approximation (SPA + RPA) to the state density in a chain of samarium isotopes 148–155 Sm against exact results (up to statistical errors) obtained with the shell-model Monte Carlo (SMMC) method. The SPA + RPA method incorporates all static fluctuations beyond the mean field together with small-amplitude quantal fluctuations around each static fluctuation. Using a pairing plus quadrupole interaction, we show that the SPA + RPA state densities agree well with the exact SMMC densities for both the even- and odd-mass isotopes. For the even-mass isotopes, we also compare our results with mean-field state densities calculated with the finite-temperature Hartree-Fock-Bogoliubov (HFB) approximation. We find that the SPA + RPA repairs the deficiencies of the mean-field approximation associated with broken rotational symmetry in deformed nuclei and with the violation of particle-number conservation in the pairing condensate. In particular, in deformed nuclei the SPA + RPA reproduces the rotational enhancement of the state density relative to the mean-field state density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Validity of path thermodynamic description of reactive systems: Microscopic simulations

Traditional stochastic modeling of reactive systems limits the domain of applicability of the associated path thermodynamics to systems involving a single elementary reaction at the origin of each observed change in composition. An alternative stochastic modeling has recently been proposed to overcome this limitation. These two ways of modeling reactive systems are in principle incompatible. Here, the question thus arises about choosing the appropriate type of modeling to be used in practical situations. In the absence of sufficiently accurate experimental results, one way to address this issue is through the microscopic simulation of reactive fluids, usually based on hard-sphere dynamics in the Boltzmann limit. In this paper, we show that results obtained through such simulations unambiguously confirm the predictions of traditional stochastic modeling, invalidating a recently proposed alternative.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2018

Path integral Monte Carlo simulations of warm dense aluminum

Here, we perform first-principles path integral Monte Carlo (PIMC) and density functional theory molecular dynamics (DFT-MD) calculations to explore warm dense matter states of aluminum. Our equation of state (EOS) simulations cover a wide density-temperature range of $0.1-32.4$~g$\,$cm$^{-3}$ and $10^4-10^8$~K. Since PIMC and DFT-MD accurately treat effects of the atomic shell structure, we find two compression maxima along the principal Hugoniot curve attributed to K-shell and L-shell ionization. The results provide a benchmark for widely used EOS tables, such as SESAME, QEOS, and models based on Thomas-Fermi and average-atom techniques. A subsequent multi-shock analysis provides a quantitative assessment for how much heating occurs relative to an isentrope in multi-shock experiments. Finally, we compute heat capacity, pair-correlation functions, the electronic density of states, and Z to reveal the evolution of the plasma structure and ionization behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2013

Path-Integral Monte Carlo Simulation of the Warm Dense Homogeneous Electron Gas

We perform calculations of the 3D finite-temperature homogeneous electron gas in the warm-dense regime $(r_s ≡ (3/4πn)^{1/3}a^{-1}_0 = 1.0 – 40.0$ and $Θ ≡ T/T_F = 0.0625 – 8.0)$ using restricted path-integral Monte Carlo simulations. Precise energies, pair correlation functions, and structure factors are obtained. For all densities, we find a significant discrepancy between the ground state parametrized local density approximation and our results around $T_F$. These results can be used as a benchmark for developing finite-temperature density functionals, as well as input for orbital-free density function theory formulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2019

Ultrafast Structural Dynamics along the β – γ Phase Transition Path in MnAs

We investigate the orthorhombic distortion and the structural dynamics of epitaxial MnAs layers on GaAs(001) using static and time-resolved x-ray diffraction. Laser-induced intensity oscillations of Bragg reflections allow us to identify the optical phonon associated with orthorhombic distortion and to follow its softening along the path towards an undistorted phase of hexagonal symmetry. Furthermore, the frequency of this mode falls in the THz range, in agreement with recent calculations. Incomplete softening suggests that the β–γ transformation deviates from a purely second-order displacive transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Effect of heat treatment paths on the aging and rejuvenation of metallic glasses

Here, this study explores the influence of heat treatment paths on the structural relaxation of metallic glasses (MGs) in the regime of fast dynamics. We create MG samples using various quenching rates, from 10 9 to 10 11 K/s, and expose these samples to near-T g heat treatments with assorted combinations of heating/cooling rates, from 5×10 10 to 5×10 12 K/s, and annealing durations, from 10 ps to 10 ns. Results show that the effect of the heating rate is intricately tied to the initial structure of the MG, while a decrease in the cooling rate invariably intensifies the aging process. Extending the annealing duration may induce either aging or rejuvenation, subject to the specific thermal history. To interpret these findings, we hypothesize that the memory effect, governed by the activation and annihilation of reversible and irreversible flow units, underpins the rejuvenation-aging competition in MGs. Moreover, we suggest viewing the cooling stage as an annealing phase controlled by gradient temperature and fine-tuning its rate to achieve the targeted active flow unit distributions. This study illuminates the role of fast dynamics during the glass relaxation process and offers practical strategies for tailoring heat treatments to optimize MG structures and mechanical performance.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Complex paths around the sign problem

The Monte Carlo evaluation of path integrals is one of a few general purpose methods to approach strongly coupled systems. It is used in all branches of physics, from QCD and nuclear physics to the correlated electron systems. However, many systems of great importance (dense matter inside neutron stars, the repulsive Hubbard model away from half filling, and dynamical and nonequilibrium observables) are not amenable to the Monte Carlo method as it currently stands due to the so-called sign problem. Here, a new set of ideas recently developed to tackle the sign problem based on the complexification of field space and the Picard-Lefshetz theory accompanying it is reviewed. The mathematical ideas underpinning this approach, as well as the algorithms developed thus far, are described together with nontrivial examples where the method has already been proved successful. Directions of future work, including the burgeoning use of machine learning techniques, are delineated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Multi-Resolution UAV Path Replanning for Inspection of Tailings Dams

Autonomous inspection of large and complex structures with a commercial unmanned aerial vehicle (UAV) is a challenging problem that has been addressed in recent years. In this paper, we address the global motion planning problem of creating autonomous inspection missions for UAVs considering photogrammetry constraints. We focus on the inspection of large tailings dams, which are dam structures used to store waste byproducts of mining. Our method uses a prior sparse point cloud of the dam to generate a voxel grid, where paths satisfying photogrammetry constraints are tested for collisions. We then apply the A* algorithm as a local planner to avoid obstacles within the global mission. Moreover, we address the problem of changing routes online by using octree-based multi-resolution grids for efficient and fast pathfinding. Our results, obtained using tridimensional maps of an actual coal mine tailings dam, show that using octrees for multi-resolution motion planning is faster than using a fixed voxel grid in online missions while inspecting large structures.

42 ENGINEERING↗

DOE OSTI2023

A Novel Scalable Array Design for III-V Compound Semiconductor-based Nonvolatile Memory (UltraRAM) with Separate Read-Write Paths

The dream of achieving a universal memory that can provide robust non-volatile memory states along with low-energy operation has been the key driving force of memory research. Despite dominating the memory market, conventional charge-based memories cannot satisfy these requirements. However, UltraRAM, an oxide-free charge-based memory cell, aims to achieve both of these requirements. This device achieves non-volatility (with an endurance of over 10 7 cycles and a retention of over 1000 years) along with switching at low-voltage (±2.3 V) utilizing a triple-barrier resonant tunneling (TBRT) structure made of InAs/AlSb. In this work, we propose an array design for UltraRAM-based memory devices. Our proposed memory array features separate read-write path and eliminates the possibility of accidentally switching the memory states stored in the array. Moreover, our design allows us to read all the cells in a column in one cycle without imposing any limit on the scalability. Besides, since the read operation in our proposed design is independent of the write mechanism, there is flexibility to optimize the read operation for memory and in-memory computing applications.

Alam, Shamiul↗

DOE OSTI2024

The Path to Autonomous Cyberdefense

Defenders are overwhelmed by attacks against their networks, which will only be exacerbated as attackers leverage artificial intelligence to automate workflows. Here, we propose a path to autonomous cyberagents able to augment defenders by automating critical steps in the cyberdefense lifecycle.

Oesch, Sean↗

DOE OSTI2017

Visualizing the Uncertainty of Graph-based 2D Segmentation with Min-path Stability

Here, this paper presents a novel approach to visualize the uncertainty in graph-based segmentations of scalar data. Segmentation of 2D scalar data has wide application in a variety of scientific and medical domains. Typically, a segmentation is presented as a single unambiguous boundary although the solution is often uncertain due to noise or blur in the underlying data as well as imprecision in user input. Our approach provides insight into this uncertainty by computing the “min-path stability”, a scalar measure analyzing the stability of the segmentation given a set of input constraints. Our approach is efficient, easy to compute, and can be generally applied to either graph cuts or live-wire (even partial) segmentations. In addition to its general applicability, our new approach to graph cuts uncertainty visualization improves on the time complexity of the current state-of-the-art with an additional fast approximate solution. We also introduce a novel query enabled by our approach which provides users with alternate segmentations by efficiently extracting local minima of the segmentation optimization. Finally, we evaluate our approach and demonstrate its utility on data from scientific and medical applications.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Predicting microstructurally sensitive fatigue‐crack path in WE43 magnesium using high‐fidelity numerical modeling and three‐dimensional experimental characterization

Abstract Microstructurally small fatigue‐crack growth in polycrystalline materials is highly three‐dimensional due to sensitivity to local microstructural features (e.g., grains). One requirement for modeling microstructurally sensitive crack propagation is establishing the criteria that govern crack evolution, including crack deflection. Here, a high‐fidelity finite‐element modeling framework is used to assess the performance and validity of various crack‐growth criteria, including slip‐based metrics (e.g., fatigue‐indicator parameters), as potential criteria for predicting three‐dimensional crack paths in polycrystalline materials. The modeling framework represents cracks as geometrically explicit discontinuities and involves voxel‐based remeshing, mesh‐gradation control, and a crystal‐plasticity constitutive model. The predictions are compared to experimental measurements of WE43 magnesium samples subject to fatigue loading, for which three‐dimensional grain structures and fatigue‐crack surfaces were measured post‐mortem using near‐field high‐energy x‐ray diffraction microscopy and x‐ray computed tomography. Findings from this work are expected to improve the predictive capabilities of simulations involving microstructurally small fatigue‐crack growth in polycrystalline materials.

Engineering↗