Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plasma simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Ablative overlays for Space Shuttle leading edge ascent heat protection

Ablative overlays were evaluated via a plasma-arc simulation of the ascent pulse on the leading edge of the Space Shuttle Orbiter. Overlay concepts included corkboard, polyisocyanurate foam, low-density Teflon, epoxy, and subliming salts. Their densities ranged from 4.9 to 81 lb per cu ft, and the thicknesses varied from 0.107 to 0.330 in. Swept-leading-edge models were fabricated from 30-lb per cu ft silicone-based ablators. The overlays were bonded to maintain the surface temperature of the base ablator below 500 F during ascent. Foams provided minimum-weight overlays, and subliming salts provided minimum-thickness overlays. Teflon left the most uniform surface after ascent heating.

Strauss, E. L.↗

Waves in space plasmas - The mirror trapping of hot auroral electrons

A brief review is given of the problem of precipitation of auroral electrons by electrostatic Bernstein waves. Since the magnetospheric loss cone is small, only moderately small intense levels of wave turbulence are required to remove any large anisotropy sources of free energy and to maintain a weakly anisotropic electron distribution on strong diffusion precipitation. The electrostatic electron cyclotron harmonic waves are nonconvectively unstable for weak loss cone anisotropies and over a large range of parameters for both the hot and cold distributions. Since the instability is nonconvective, weak wave growth can be maintained independent of the flux level of the hot electrons, i.e., the instability does not have the stably trapped flux limit imposed by convective amplification. Recent plasma numerical simulations show that the nonlinear evolution of this instability involves both the pitch angle diffusion of the hot electrons and the heating of the cold electrons.

Ashour-Abdalla, M.↗

Performance of an ablator for Space Shuttle inorbit repair in an arc-plasma airstream

An ablator patch material performed well in an arc plasma environment simulating nominal Earth entry conditions for the Space Shuttle. Ablation tests using vacuum molded cones provided data to optimize the formulation of a two part polymer system for application under space conditions. The blunt cones were made using a Teflon mold and a state of the art caulking gun. Char stability of formulations with various amounts of catalyst and diluent were investigated. The char was found to be unstable in formulations with low amounts of catalyst and high amounts of diluent. The best polymer system determined by these tests was evaluated using a half tile patch in a multiple High Temperature Reusable surface Insulation tile model. It was demonstrated that this ablator could be applied in a space environment using a state of the art caulking gun, would maintain the outer mold line of the thermal protection system during entry, and would keep the bond line temperature at the aluminum tile interface below the design limit.

Stewart, D. A.↗

Acceleration of hydrogen ions and conic formation along auroral field lines

Electrostatic ion cyclotron turbulence and the formation of ion conics at low altitudes (about 1500 km) along auroral field lines have been investigated analytically and by plasma numerical simulations. Ion cyclotron waves are assumed to be driven unstable by the upgoing cold ionospheric electrons associated with the downward auroral current. When the electron drift speed is comparable to the electron thermal speed, it was found that the large-amplitude (the saturation level is approximately equal to unity) coherent (omega equals the ion gyrofrequency) ion cyclotron waves should exist along auroral field lines at low altitudes extending a few hundred kilometers. Ion conics are associated with ion cyclotron turbulence, and the ion bulk temperature is found to increase by a factor of 10 from the initial ionospheric temperature, while the temperature of the high-energy tail can be as much as 100 times the ionospheric temperature. Theory and simulations are in good agreement.

Okuda, H.↗

Waves and instabilities in a magnetized plasma

Work on computer simulation of waves and instabilities in magnetized plasmas is reviewed. Included are verification of linear theory. Particular emphasis is given to investigation of nonlinear processes involved in the saturation of instabilities and of wave damping; these include a nonlinear cyclotron resonance and particle trapping in intense waves.

Dawson, J. M.↗

Energy transfer in the quiet and disturbed magnetosphere

Progress on magnetospheric energy transfer reported during the 1979-1982 quadrennium is reviewed. A discussion of the macroscopic control of magnetospheric phenomena by solar-wind electric and magnetic fields and kinetic pressure is followed by sections on energy transfer processes at the dayside magnetopause, in the magnetotail, near geosynchronous orbit, and at altitudes of about 1 earth radius above the auroral oval. Rapid progress in these areas has been stimulated primarily by ISEE and S3-3 observations and by the development of techniques for the large-scale computer simulation of plasma phenomena.

Burch, J. L.↗

Modelling of time-dependent ion outflows at high geomagnetic latitudes

The output from the NCAR Thermospheric General Circulation Model was used to simulate the time and altitude-dependent F-region ion frictional heating rate. These ion-heating profiles, computed as a functionm of UT along the locus of specific flux tubes, were used as boundary conditions in the Gombosi et al. (1985) polar wind model to simulate the plasma heating history of a flux tube traversing the cusp region. Using derived time-varying frictional heating rates such as those experienced by these flux tubes, it is shown that transverse ion heating below 500 km can provide sufficient energy to perturb the velocity distribution of the major ion species.

Cannata, R. W.↗

A general concurrent algorithm for plasma particle-in-cell simulation codes

The general concurrent particle-in-cell (GCPIC) algorithm has been used to implement an electrostatic particle-in-cell code on a 32-node hypercube parallel computer. The GCPIC algorithm decomposes the PIC code by dividing the particle simulation physical domain into subdomains that are equal in number to the number of processors; all subdomains will accordingly possess approximately equal numbers of particles. The portion of the code which updates particle positions and velocities is nearly 100 percent efficient when the number of particles increases linearly with that of hypercube processors.

Liewer, Paulett C.↗

Simulation of the ejection of plasma from the polar ionosphere

In the present numerical model for calculating H(+) and O(+) ion densities, fluxes, and temperatures, as well as the temperature of electrons, on a convecting magnetic field line, the one-dimensional fluid equations are solved along a field line path extending from 100-km altitude into the magnetotail. The evolution of O(+) and H(+) densities is calculated on field lines convecting over the polar cap. The results obtained indicate that centrifugal force is effective in accelerating ionospheric H(+) plasma outward into the magnetotail, while the 'smothering' effect of the H(+) plasma, on top of the O(+) plasma, prevents any ejection of the latter as long as its scale height is smaller than that of the H(+) plasma.

Swift, Daniel W.↗

Comment on 'Comparison of observed and calculated implanted ion distributions outside Comet Halley's bow shock' by T. I. Gombosi, M. Neugebauer, A. D. Johnstone, A. J. Coates, and D. E. Huddleston

It is argued that the formulation used by Gombosi (1991) does not distinguish between two fundamental types of resonant interactions (those between cometary pickup ions and LF electromagnetic waves). Two problems arise from using their overly simplified expressions. The wave polarization of the solar wind Alfven wave is not purely right-handed, and values from alpha sub com and alpha sub sw are not well known, nor are the 'polarizations' of the 'backward'-going waves in either case. Gombosi et al. discuss the antisunward vs the sunward propagating solar wind Alfven wave, and assume a reasonable value of 0.2 for alpha sub sw. However, alpha sub com is totally unknown. It is concluded that a more correct analysis of wave polarization can lead to significant changes in the formulation and results from Gombosi et al. In his reply Gombosi argues that his simplified wave-particle interaction model is consistent with Giotto observations and plasma kinetic simulations and it leads to a reasonable approximation of the implanted ion transport coefficients. The more complicated approach suggested by Tsurutani & Thorne (1993) requires the introduction of several ad hoc parameters and it does not lead to any change of the energy diffusion coefficient.

Tsurutani, Bruce T.↗

Wave generation by contaminant ions

Investigations dealing with the generation of waves by contaminant ions are reported. The studies included the properties of the velocity distribution function of such ions. It was found that it takes about one ion-cyclotron period for the distribution function to transform from a beam to a ring distribution. A linear instability analysis was performed to examine the possibility of wave excitation by an ion beam streaming perpendicular to the ambient magnetic field in an ionospheric type of plasma. A simulation code was developed to study the nonlinear behavior of the waves excited by beam and ring types of ion distributions. The code treats both electrons and ions as particles kinetically to also factor in the possible involvement of lower-hybrid waves.

Singh, N.↗