Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pointing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Space Shuttle Earth Observation sensors pointing and stabilization requirements study

The shuttle orbiter inertial measurement unit (IMU), located in the orbiter cabin, is used to supply inertial attitude reference signals; and, in conjunction with the onboard navigation system, can provide a pointing capability of the navigation base accurate to within plus or minus 0.5 deg for earth viewing missions. This pointing accuracy can degrade to approximately plus or minus 2.0 deg for payloads located in the aft bay due to structural flexure of the shuttle vehicle, payload structural and mounting misalignments, and calibration errors with respect to the navigation base. Drawbacks to obtaining pointing accuracy by using the orbiter RCS jets are discussed. Supplemental electromechanical pointing systems are developed to provide independent pointing for individual sensors, or sensor groupings. The missions considered and the sensors required for these missions and the parameters of each sensor are described. Assumptions made to derive pointing and stabilization requirements are delineated.

Source record↗

Magnetic suspension and pointing system

An apparatus is reported for accurate pointing of instruments on a carrier vehicle and for isolation of the instruments from the vehicle's motion disturbances. The apparatus includes two assemblies with connecting interfaces. The first assembly is attached to the carrier vehicle and consists of an azimuth gimbal and an elevation gimbal which provide coarse pointing by allowing two rotations of the instruments relative to the carrier vehicle. The second or vernier pointing assembly is made up of magnetic suspension and fine pointing actuators, roll motor segments, and an instrument mounting plase which provides appropriate magnetic circuits for the actuators and the roll motor segments. The vernier pointing assembly provides attitude fine pointing and roll positioning of the instruments as well as six degree-of-freedom isolation from carrier motion disturbances.

Anderson, W. W.↗

The Annular Suspension and Pointing System

The Annular Suspension and Pointing System (ASPS) is a general purpose mount designed to provide orientation, mechanical isolation, and fine pointing for space experiments. The ASPS consists of two assemblies, the first being a set of two gimbals attached to a carrier spacecraft (e.g., Space Shuttle) and providing coarse pointing, and the second a magnetic vernier pointing and isolation assembly attached to the inner gimbal of the first assembly and providing fine pointing. Discussion of the evolution of this concept, required related technology, and data from analyses and simulations predicting pointing accuracies that allowed the specification of hardware design requirements is presented.

Anderson, W. W.↗

The Use of Principal Components for Creating Improved Imagery for Geometric Control Point Selection

A directed principal component (PC) analysis and its transformation was applied to 7-channel thematic mapper simulator (TMS) data and 4-channel LANDSAT multispectral scanner system (MSS) data collected over the city of Lancaster, Pennsylvania, to create improved imagery for geometric control point selection for image to image registration. Nineteen temporally stable geometric control points, such as road interactions and bridges, were selected for a 236 sq km area. The control points were visible on both the TMS and MSS imagery. On the first attempt the corresponding image control points were selected on both data sets without using the principal components transformation. Many of the road intersection locations were visible but the actual road crossings could not be distinguished. As a result, mensuration errors using raw data exceeded the equivalent of two (79 x 79 m) pixels. The application of a guided principal components transformation yielded TMS and MSS single band images showing improved detail in the scene's urban and residential infrastructure. The PC transformed data sets were then utilized for the reselection of geometric control points. By shown greater detail, control points on both the TMS and MSS imagery could be located with greater precision using the PC transformed data.

Imhoff, M. L.↗

Experimental results for the rapid determination of the freezing point of fuels

Two methods for the rapid determination of the freezing point of fuels were investigated: an optical method, which detected the change in light transmission from the disappearance of solid particles in the melted fuel; and a differential thermal analysis (DTA) method, which sensed the latent heat of fusion. A laboratory apparatus was fabricated to test the two methods. Cooling was done by thermoelectric modules using an ice-water bath as a heat sink. The DTA method was later modified to eliminate the reference fuel. The data from the sample were digitized and a point of inflection, which corresponds to the ASTM D-2386 freezing point (final melting point), was identified from the derivative. The apparatus was modifified to cool the fuel to -60 C and controls were added for maintaining constant cooling rate, rewarming rate, and hold time at minimum temperature. A parametric series of tests were run for twelve fuels with freezing points from -10 C to -50 C, varying cooling rate, rewarming rate, and hold time. Based on the results, an optimum test procedure was established. The results showed good agreement with ASTM D-2386 freezing point and differential scanning calorimetry results.

Mathiprakasam, B.↗

Impact of magnetic isolation on pointing system performance in the presence of structural flexibility

The inertial pointing stability of a gimbal pointing system (AGS) was compared with a magnetic pointing/gimbal followup system (ASPS), under certain conditions of system structural flexibility and disturbance inputs from the gimbal support structure. Separate 3 degree-of-freedom (3DOF) linear models based on NASTRAN modal flexibility data for the gimbal and support structures were generated for the ASPS configurations. Using the models inertial pointing control loops providing 6dB of gain margin and 45 deg of phase margin were defined for each configuration. The pointing loop bandwidth obtained for the ASPS is more than twice the level achieved for the AGS configuration. The AGS limit is attributed to the gimbal and support structure flexibility. As a result of the higher ASPS pointing loop bandwidth and the disturbance rejection provided by the magnetic isolation ASPS pointing performane is significantly better than that of the AGS system. The low frequency peak of the ASPS transfer function from base disturbance to payload angular motion is almost 60dB lower than AGS low frequency peak.

Seller, J.↗

Earth observing system instrument pointing control modeling for polar orbiting platforms

An approach to instrument pointing control performance assessment for large multi-instrument platforms is described. First, instrument pointing requirements and reference platform control systems for the Eos Polar Platforms are reviewed. Performance modeling tools including NASTRAN models of two large platforms, a modal selection procedure utilizing a balanced realization method, and reduced order platform models with core and instrument pointing control loops added are then described. Time history simulations of instrument pointing and stability performance in response to commanded slewing of adjacent instruments demonstrates the limits of tolerable slew activity. Simplified models of rigid body responses are also developed for comparison. Instrument pointing control methods required in addition to the core platform control system to meet instrument pointing requirements are considered.

Briggs, H. C.↗

Minimum-time pointing control of a two-link manipulator

Minimum-time pointing control for the end-effector of a planar, two-link manipulator is developed. Minimum-time pointing control is a new area of research for multilink manipulators, which can be applied to rapid retargeting control of a multibody spacecraft. The minimum-time control problem of aligning the second link of the two-link manipulator with a given target point is considered. A numerical method called the minimizing-boundary-condition method is used to determine optimal solutions for the two-point boundary-value problem associated with first-order necessary conditions. Minimum-time solutions for different models of pointing systems are compared. The results of the comparison show that a two-link manipulator with two degree-of-freedom performs better than a conventional one-link system for minimum-time pointing.

Wie, Bong↗

Precision pointing compensation for DSN antennas with optical distance measuring sensors

The pointing control loops of Deep Space Network (DSN) antennas do not account for unmodeled deflections of the primary and secondary reflectors. As a result, structural distortions due to unpredictable environmental loads can result in uncompensated boresight shifts which degrade pointing accuracy. The design proposed here can provide real-time bias commands to the pointing control system to compensate for environmental effects on pointing performance. The bias commands can be computed in real time from optically measured deflections at a number of points on the primary and secondary reflectors. Computer simulations with a reduced-order finite-element model of a DSN antenna validate the concept and lead to a proposed design by which a ten-to-one reduction in pointing uncertainty can be achieved under nominal uncertainty conditions.

Scheid, R. E.↗

Analysis of the flight dynamics of the Solar Maximum Mission (SMM) off-sun scientific pointing

Algorithms are presented which were created and implemented by the Goddard Space Flight Center's (GSFC's) Solar Maximum Mission (SMM) attitude operations team to support large-angle spacecraft pointing at scientific objectives. The mission objective of the post-repair SMM satellite was to study solar phenomena. However, because the scientific instruments, such as the Coronagraph/Polarimeter (CP) and the Hard X ray Burst Spectrometer (HXRBS), were able to view objects other than the Sun, attitude operations support for attitude pointing at large angles from the nominal solar-pointing attitudes was required. Subsequently, attitude support for SMM was provided for scientific objectives such as Comet Halley, Supernova 1987A, Cygnus X-1, and the Crab Nebula. In addition, the analysis was extended to include the reverse problem, computing the right ascension and declination of a body given the off-Sun angles. This analysis led to the computation of the orbits of seven new solar comets seen in the field-of-view (FOV) of the CP. The activities necessary to meet these large-angle attitude-pointing sequences, such as slew sequence planning, viewing-period prediction, and tracking-bias computation are described. Analysis is presented for the computation of maneuvers and pointing parameters relative to the SMM-unique, Sun-centered reference frame. Finally, science data and independent attitude solutions are used to evaluate the large-angle pointing performance.

Pitone, D. S.↗

Application of inertial instruments for DSN antenna pointing and tracking

The feasibility of using inertial instruments to determine the pointing attitude of the NASA Deep Space Network antennas is examined. The objective is to obtain 1 mdeg pointing knowledge in both blind pointing and tracking modes to facilitate operation of the Deep Space Network 70 m antennas at 32 GHz. A measurement system employing accelerometers, an inclinometer, and optical gyroscopes is proposed. The initial pointing attitude is established by determining the direction of the local gravity vector using the accelerometers and the inclinometer, and the Earth's spin axis using the gyroscopes. Pointing during long-term tracking is maintained by integrating the gyroscope rates and augmenting these measurements with knowledge of the local gravity vector. A minimum-variance estimator is used to combine measurements to obtain the antenna pointing attitude. A key feature of the algorithm is its ability to recalibrate accelerometer parameters during operation. A survey of available inertial instrument technologies is also given.

Eldred, D. B.↗

A comparison between bright points in a coronal hole and a quiet-sun region

A comparison is made of the morphological structure and temporal behavior of the emission from coronal bright points in a coronal hole and a quiet region, using data from the Harvard EUV experiment on Skylab. It is found that, in both regions, coronal bright points are located at network boundaries and cover a range of sizes from 10 to 40 in in linear extent. In a given bright pint, the peaks of emission in the six different lines, measured simultaneously through the same instrument slit, are not always cospatial, implying that bright points consist of a complex of small-scale loops at different temperatures. The intensity of bright points in both regions is also characterized by a significant temporal variability in all the wavelengths measured. This variability exhibits no regular periodicity. Yet the ratio of the varying (ac) to the constant (dc) components of the emission, in all the bright points studied, has a local maximum at 1-2 x 10 to the 5th k which coincides with the peak of the radiative loss function, and another local maximum at Mg x (1.4 x 10 to the 6th K). It is found that coronal bright points in a coronal hole or a quiet region are indistinguishable structures, and, therefore, conclude that they are independent of the overlying background corona.

Habbal, Shadia Rifai↗

Analysis of the flight dynamics of the Solar Maximum Mission (SMM) off-sun scientific pointing

Algorithms are presented which were created and implemented by the Goddard Space Flight Center's (GSFC's) Solar Maximum Mission (SMM) attitude operations team to support large-angle spacecraft pointing at scientific objectives. The mission objective of the post-repair SMM satellite was to study solar phenomena. However, because the scientific instruments, such as the Coronagraph/Polarimeter (CP) and the Hard X-ray Burst Spectrometer (HXRBS), were able to view objects other than the Sun, attitude operations support for attitude pointing at large angles from the nominal solar-pointing attitudes was required. Subsequently, attitude support for SMM was provided for scientific objectives such as Comet Halley, Supernova 1987A, Cygnus X-1, and the Crab Nebula. In addition, the analysis was extended to include the reverse problem, computing the right ascension and declination of a body given the off-Sun angles. This analysis led to the computation of the orbits of seven new solar comets seen in the field-of-view (FOV) of the CP. The activities necessary to meet these large-angle attitude-pointing sequences, such as slew sequence planning, viewing-period prediction, and tracking-bias computation are described. Analysis is presented for the computation of maneuvers and pointing parameters relative to the SMM-unique, Sun-centered reference frame. Finally, science data and independent attitude solutions are used to evaluate the larg-angle pointing performance.

Pitone, D. S.↗

A simulation of the instrument pointing system for the Astro-1 mission

NASA has recently completed a shuttle-borne stellar ultraviolet astronomy mission known as Astro-1. A three axis instrument pointing system (IPS) was employed to accurately point the science instruments. In order to analyze the pointing control system and verify pointing performance, a simulation of the IPS was developed using the multibody dynamics software TREETOPS. The TREETOPS IPS simulation is capable of accurately modeling the multibody IPS system undergoing large angle, nonlinear motion. The simulation is documented and example cases are presented demonstrating disturbance rejection, fine pointing operations, and multiple target pointing and slewing of the IPS.

Whorton, M.↗

Model reference adaptive control for the azimuth-pointing system of a balloon-borne stabilized platform

A balloon-born stabilized platform has been developed for the remotely operated altitude-azimuth pointing of a millimeter wave telescope system. This paper presents a development and implementation of model reference adaptive control (MRAC) for the azimuth-pointing system of the stabilized platform. The primary goal of the controller is to achieve pointing rms better than 0.1 deg. Simulation results indicate that MRAC can achieve pointing rms better than 0.1 deg. Ground test results show pointing rms better than 0.03 deg. Data from the first flight at the National Scientific Balloon Facility (NSBF) Palestine, Texas show pointing rms better than 0.02 deg.

Lubin, Philip M.↗

External calibration of polarimetric radars using point and distributed targets

Polarimetric calibration algorithms using combinations of point targets and reciprocal distributed targets are developed. From the reciprocity relations of distributed targets, and equivalent point target response is derived. Then the problem of polarimetric calibration using two point targets and one distributed target reduces to that using three point targets, which has been previously solved. For calibration using one point target and one reciprocal distributed target, two cases are analyzed with the point target being a trihedral reflector or a polarimetric active radar calibrator (PARC). For both cases, the general solutions of the system distortion matrices are written as a product of a particular solution and a matrix with one free parameter. For the trihedral-reflector case, this free parameter is determined by assuming azimuthal symmetry for the distributed target. For the PARC case, knowledge of one ratio of two covariance matrix elements of the distributed target is required to solve for the free parameter. Numerical results are simulated to demonstrate the usefulness of the developed algorithms.

Yueh, S. H.↗

Optimal cycling between cislunar and cismartian libration points with reusable nuclear electric transfer vehicles

A cyclical Mars exploration scenario is described which combines the use of libration points in the earth-moon and sun-Mars systems with a pair of reusable nuclear electric propulsion (NEP) transfer vehicles. In this approach, the NEP transfer vehicles are stationed at the cislunar and cismartian libration points, and involves short cislunar point escape and capture spirals. It eliminates any spiral requirements at Mars by utilizing the cismartian point as a transportation node. Chemical/aerobrake vehicles are used to transport humans between earth and the cislunar point as well as between Mars and the cismartian point.

Sponaugle, Steven J.↗

Analysis of a turning point problem in flight trajectory optimization

The optimal control policy for the aeroglide portion of the minimum fuel, orbital plane change problem for maneuvering entry vehicles is reduced to the solution of a turning point problem for the bank angle control. For this problem a turning point occurs at the minimum altitude of the flight, when the flight path angle equals zero. The turning point separates the bank angle control into two outer solutions that are valid away from the turning point. In a neighborhood of the turning point, where the bank angle changes rapidly, an inner solution is developed and matched with the two outer solutions. An asymptotic analysis of the turning point problem is given, and an analytic example is provided to illustrate the construction of the bank angle control.

Gracey, C.↗