SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The primary deliverable for this project will be to construct a power electronics package utilizing an organic, electrically insulating substrate material and demonstrate superior thermal performance and greater reliability under thermal cycling, thermal aging, vibration, power cycling, and electrical high-potential evaluation over traditional packages.
Performance assessments (PAs), whether probabilistic or deterministic, have largely focused on evaluating human health effects of radionuclides. In the past, it was asserted that protecting human health would automatically protect the environment. This blanket assertion has been questioned, so tools and methodologies to directly estimate non-human biota dose have been developed and made available since the early 2000's. For example, the Biota Dose Assessment Committee (BDAC) guidance led to the development of the RESRAD-BIOTA (RESRAD stands for Residual Radioactive materials) software to implement this guidance. The BDAC was a US Department of Energy (DOE) led working group with members from academia and consultancies in addition to DOE technical staff. Parallel efforts have been in place in Europe with the development of the ERICA tool (Environmental Risk from Ionising Contaminants: Assessment and Management). More recently, interpretation of the requirements of US Department of Energy (DOE) Order O458.1 have led some waste management facilities to include ecological risks in addition to human health effects in their PAs. We have recently developed methodologies to assess ecological risks within probabilistic PAs (PPAs) for two Federal facilities. One of the challenges in applying the non-human biota assessment models to PPAs is that ecological risk assessments following US Environmental Protection Agency (EPA) or DOE guidance start with protective screening assessments before moving into more site-specific ecological risk assessments. Conservative assumptions bias the screening assessments and greatly overestimate the risks posed by contaminants. However, although the screens are biased they can be useful in ruling out model spatial domain areas or types of biota from requiring further assessment. In some cases, the results of the screen could entirely rule out ecological risks from further assessment. For a more refined and unbiased estimate of dose to non-human biota, one would typically conduct site-specific studies to better define exposure through the food web or adverse effects based on eco-toxicity studies of environmental, and generally weathered, contaminant mixtures. However, for PPAs that consider future site conditions after the loss of institutional control, such site-specific studies are not possible. Rather, site-specific future ecological risk models use probabilistic inputs that result in a distribution of population doses or exposures and calculate the distribution of possible adverse effects to ecological populations. This approach considers both radionuclide and chemical inventory. For both Federal facilities, the model spatial domains include riparian and aquatic environments located downstream of the waste management site. These riparian and aquatic environments represent linear exposure elements for some wildlife populations and require special consideration of exposures to individuals and to populations along such spatial domains. At a minimum, wildlife foraging should be focused along the axis of such water bodies. Another challenge is how to incorporate ecologically relevant spatial scales into models that have contaminant transport as the primary focus. Riparian and aquatic environments also have threatened and endangered (T and E) species, which necessitate greater levels of protection given their rarity. A final challenge for conducting ecological risk assessments is how to evaluate T and E species in the future. This might be addressed by evaluating potential for impacts on individuals of feeding guilds with species that are currently threatened or endangered. We also have to consider how ecological populations might change as a result of climate change. It is a more difficult problem to predict what species might become rare in the future, and how to best assess future populations of threatened or endangered species. (authors)
The objective of the Best Practice is to facilitate a paradigm shift when it comes to approaches to the decision making process for nuclear waste management, disposal, and remediation decisions. The stakeholder-engaged structured decision making (SDM) paradigm shift provides a transparent framework for developing optimal solutions to complex problems (Keeney, 1992, Gregory et al, 2012). This is a deliberative-analytical process. The deliberative side centers on understanding stakeholder concerns and values, and developing objectives while identifying options that may achieve those objectives. SDM is implemented with the aid of computer tools that are aimed specifically at capturing these deliberative aspects of a decision analysis. SDM captures this information in a structured format that allows access to the values, objectives, and options that have been identified to help. Through this approach we achieve transparency, traceability, and reproducibility. The goal of SDM at this stage is to provide a formal structure for capturing and processing deliberative information. The deliberative part sets the stage for the analytical part of SDM. A variety of Subject matter experts (SMEs) are engaged in how to evaluate the options through the objectives. Objectives often include minimizing human health risk and minimizing cost, but in the full scope of a sustainability-based approach to decision making, it can include objectives related to economic, environmental and social issues. Subject matter experts might provide other options for achieving the objectives, but their primary role is to evaluate/model the options to the endpoint defined by the objectives or in other words perform a consequence analysis. The structure of SDM makes it clear exactly what is needed from the SMEs, because the options are identified, and the endpoint (objectives) are defined - evaluations and/or models are needed to connect options to objectives. This consequence analysis completes the evaluation, and directly addresses which of the options is the best option. The same SDM approach to finding the best options can also be used for prioritization and resource allocation. Because all of the information is captured in a formal system with the help of computer tools (a software framework for implementing SDM), the decision models that are developed for an application can be fully evaluated numerically and for the insights gained from using a formal process for managing the multiple factors that need to be considered for complex decisions. This includes uncertainty and sensitivity analysis that can be used to guide the need for further data/information collection if the optimal decision is not adequately supported - that is, if there is insufficient confidence in the decision. Also, this feeds directly into adaptive management therefore if more data/information are collected then the efficacy of the current decision can be evaluated, potentially leading to a change in decisions if warranted. (authors)
The overarching goal of the research presented is to build a subsurface radionuclide transport model for the vadose zone in the northeastern Negev desert of Israel, in order to assist in evaluating its suitability for radioactive waste subsurface disposal. The Negev desert provides a unique geologic setting because of its arid conditions, deep vadose zone and the layered stratigraphy consisting of sandstones, limestones, chalks, shales, marls, phosphorites, clays and cherts. These lithologies form intercalated layers of impermeable and permeable rocks, some with a high adsorption capacity for radionuclides. This paper consists of year one results of a joint US-Israeli collaboration to construct a generic radionuclide transport model of the vadose zone of the northeastern Negev region, Israel. The work aims to (1) evaluate potential vadose zone sites for a nuclear waste disposal site in Israel, and (2) promote the exchange of information and experience in subsurface waste siting and management. First year results include a) measured hydrogeologic rock properties for rock and core samples taken from the Negev desert, Israel, b) sorption and kinetic data for uranium U(VI) on phosphorite, chalk, sandstone and oil-shale lithologies, and c) an updated geologic, stratigraphic, and hydrologic subsurface framework for the northeastern Negev region. Preliminary results on uranium adsorption for key subsurface lithologies are encouraging in terms of the potential suitability of the Negev vadose zone to act as an efficient medium for the retardation of radionuclides. The findings provide impetus for continued experimentation and the development of a northeastern Negev subsurface flow and transport model. (authors)
Decisions must be made relative to packaging spent nuclear fuel (SNF) for storage, transportation, and eventual disposal. This paper evaluates potential criticality-related loading and packaging considerations for Department of Energy (DOE)-owned SNF that could be impacted favorably or unfavorably by disposal uncertainties and proposes approaches to minimize such impacts. Using Al-Based SNF as an example and drawing on analyses performed in support of the Yucca Mountain Repository License Application (LA), this paper explores the role of natural barriers, engineered barriers, and waste form characteristics relative to reducing the potential for postclosure criticality. Several parameters important to postclosure criticality are considered in order to determine which are useful discriminators to support packaging decisions. Using these parameters, a qualitative assessment is performed relative to three options for managing DOE-owned SNFs. (authors)
The Hanford Nuclear Reservation site contains approximately 211 million liters of radioactive and chemically hazardous waste arising from nuclear weapons production, beginning with World War II, and continuing through the Cold War. The waste is stored in 177 carbon-steel underground storage tanks, of which 149 are single-shell tanks (SSTs) and the remaining are double-shell tanks (DSTs). The mission of an ongoing River Protection Project is to retrieve the waste from the underground storage tanks and then treat and immobilize (i.e., vitrify) it for disposal. Waste from the older SSTs is being progressively retrieved into the newer DSTs for storage pending treatment, immobilization, and disposal. Waste chemistry controls are in place to mitigate general corrosion, pitting corrosion, and stress corrosion cracking (SCC) and minimize corrosion risks to the carbon steel tank liners of DST at the Hanford Site. The chemistry control program focuses on preserving liner integrity while balancing the need for caustic/nitrite additions that have large downstream impacts on vitrification. Some of the DSTs store salt cake or sludge waste layers contain out-of-specification interstitial liquids that contact the primary tank bottom or sidewall. Remediation of such layers through chemical additions is not practical. At the present time, the most significant leak integrity concern at Hanford is for corrosion of the tank bottoms of DSTs where the solids layer is out of specification because of hydroxide ion depletion and consequently, pH values that are less than 12. Cathodic protection (CP) has been proposed as a possible way to protect the liners of such tanks against corrosion. The objective of this project was to investigate the feasibility of applying CP to Hanford DSTs to mitigate internal corrosion of the carbon steel tank primary liners. The scope of the project included (1) a literature review on the application of CP to storage tank systems, in general, and to waste tanks at the Savannah River Site (SRS) and Hanford, (2) a review of the finite element analysis (FEA) model recently developed to evaluate potentials for a DST, and (3) the development of a boundary element analysis (BEA) model for CP for a DST. Tank AN-107, one of the Hanford DSTs, was selected for this work because (1) the bottommost waste layer in the tank is out-of-specification, and (2) electrochemical and resistivity data, based on recent waste sampling and testing, are available for this tank. The overarching conclusion of this study is that, based on the available information, it is feasible to apply CP to mitigate internal corrosion of the primary liners of the Hanford DSTs. However, significant additional information and work are required before a CP system can be designed. Recommendations for next steps in the design of the CP system will be presented.
High temperature oxidation and corrosion degradation mechanisms dictate the lifetime of materials critical to energy production. The combination of modeling and experimental approaches such as machine learning (ML) and data analytics, with sufficient experimental data, can accelerate the development of new materials while limiting its cost. In the present work, ML will be applied to two high temperature oxidation data libraries (Oak Ridge National Laboratory and National Air and Space Administration) that comprised of about 5000 mass change sample datasheets for a variety of materials and temperatures in dry air and air + 10 % H2O. A python code was developed to prepare the data for machine learning by collecting and formatting oxidation rate constants, alloy compositions and environment of exposure into a single data frame. Scikit-learn library and Statistics and Machine Learning Toolbox within MathWorks were then used to perform unsupervised clustering and supervised regression learning. The impact of dataset distribution on the performance of the developed ML models was evaluated. Potential strategies to improve the predictions and enhance extrapolative capability of the previously trained model were investigated.
This study presents a new approach to evaluating energy efficiency potential that provides a more accurate, granular, and flexible estimate of the cost-effective energy efficiency potential in households of various income ranges. Results from this work estimate that in U.S. single-family households with income less than 200% of the federal poverty level, energy efficiency packages tailored to maximize net present value could result in an estimated $13 billion per year in energy cost savings, or $670 per year for an average household, corresponding to about 1 EJ (0.9 quads) of annual primary energy savings. These types of metrics can be estimated for other geographies (regions, states, and counties) and for other ranges of household income. These results can be used by policymakers and program designers to improve the cost-effectiveness of income-qualified programs and to improve the equity of non-income-qualified programs. The results can also be used to understand how energy efficiency opportunities differ between urban and rural areas, as well as how energy efficiency can spur economic development in areas that have had high poverty rates for decades.
Landslides are one of the most widespread natural hazards on Earth, responsible for thousands of deaths and billions of dollars in property damage every year. In the U.S. alone landslides occur in every state, causing an estimated $2 billion in damage and 25- 50 deaths each year. Annual average loss of life from landslide hazards in Japan is 170. The situation is much worse in developing countries and remote mountainous regions due to lack of financial resources and inadequate disaster management ability. Recently, a landslide buried an entire village on the Philippines Island of Leyte on Feb 17,2006, with at least 1800 reported deaths and only 3 houses left standing of the original 300. Intense storms with high-intensity , long-duration rainfall have great potential to trigger rapidly moving landslides, resulting in casualties and property damage across the world. In recent years, through the availability of remotely sensed datasets, it has become possible to conduct global-scale landslide hazard assessment. This paper evaluates the potential of the real-time NASA TRMM-based Multi-satellite Precipitation Analysis (TMPA) system to advance our understanding of and predictive ability for rainfall-triggered landslides. Early results show that the landslide occurrences are closely associated with the spatial patterns and temporal distribution of rainfall characteristics. Particularly, the number of landslide occurrences and the relative importance of rainfall in triggering landslides rely on the influence of rainfall attributes [e.g. rainfall climatology, antecedent rainfall accumulation, and intensity-duration of rainstorms). TMPA precipitation data are available in both real-time and post-real-time versions, which are useful to assess the location and timing of rainfall-triggered landslide hazards by monitoring landslide-prone areas while receiving heavy rainfall. For the purpose of identifying rainfall-triggered landslides, an empirical global rainfall intensity-duration threshold is developed by examining a number of landslide occurrences and their corresponding TMPA precipitation characteristics across the world. These early results , in combination with TRMM real-time precipitation estimation system, may form a starting point for developing an operational early warning system for rainfall-triggered landslides around the globe.
This document presents an evaluation of a potential groundwater tracer test in the uppermost RUM (Ringold Formation member of Wooded Island – upper mud unit) aquifer in the 100-H Area of the Hanford Site. The results from field electrical resistivity tomography (ERT) investigations, numerical flow and transport (F&T) modeling, coupled ERT-F&T model simulations, and laboratory resin experiments provide the technical basis for evaluating tracer test scenarios that minimize impacts to the 100-HX pump and treat (HX P&T) operations, and maximize hydrologic data acquisitions including the use of advanced surface geophysical techniques for monitoring tracer transport.
This report summarizes our evaluation of the potential energy-use and GHG-emissions reduction achieved by shifting freight from truck to rail under a most-likely scenario. A sensitivity analysis is also included. The sensitivity analysis shows changes in energy use and GHG emissions when key parameters are varied. The major contribution and distinction from previous studies is that this study considers the rail level of service (LOS) and commodity movements at the origin-destination (O-D) level. In addition, this study considers the fragility and time sensitivity of each commodity type.
A new polymer polyimide possessing optical and mechanical properties potentially suitable for space applications now exists. A preliminary evaluation of the material indicates that in its present state of development, the polyimide is not ready for space qualification. Further efforts to increase molecular weight and purify the consituents used to synthesize it are warranted. Activities addressing these needs are now being pursued. If these approaches prove successful, additional testing will take place with an emphasis on synergistic effects.
The study of probe event related potentials (probe ERPs) is reviewed. Several recent experiments are described which seem to leave in doubt the usefulness of applying ERP to simulation and field conditions as well as laboratory situations. Relatively minor changes in the experimental paradigm can produce major shifts in ERP findings, for reasons that are not clear. However, task-elicited ERPs might be used on a flight simulator if the experimenter takes time of arrival of the eyes on a particular instrument as one variable of concern and dwell time on the instrument as a second variable. One can then look at ERPs triggered by saccade termination for fixation pauses of specified durations. It may well be that ERP to a momentarily important display will differ from that elicited by routine instrument check.
A 150 hp four cylinder heavy duty Stirling engine was evaluated. The engine uses a variable stroke power control system, swashplate drive and ceramic insulation. The sensitivity of the design to engine size and heater temperature is investigated. Optimization shows that, with porous ceramics, indicated efficiencies as high as 52% can be achieved. It is shown that the gain in engine efficiency becomes insignificant when the heater temperature is raised above 200 degrees F.
Establishing an Early CO2 Storage Complex in Kemper County, Mississippi (ECO2S): Evaluation of Hydrogeochemical Properties of Storage Complex
Resource Prospector (RP) is a lunar volatiles prospecting mission being developed for potential flight in CY2021-2022. The mission includes a rover-borne payload that (1) can locate surface and near-subsurface volatiles, (2) excavate and analyze samples of the volatile-bearing regolith, and (3) demonstrate the form, extractability and usefulness of the materials. The primary mission goal for RP is to evaluate the In-Situ Resource Utilization (ISRU) potential of the lunar poles.
To evaluate the effect of the FGGE satellite observing system, the following two data sets were compared by examining the available potential energy (APE) and extratropical cyclone activity within the entire global domain during the first Special Observing Period: (1) the complete FGGE IIIb set, which incorporates satellite soundings, and (2) a NOSAT set which incorporates only conventional data. The time series of the daily total APEs indicate that NOSAT values are larger than the FGGE values, although in the Northern Hemisphere the differences are negligible. Analyses of cyclone scale features revealed only minor differences between the Northern Hemisphere FGGE and NOSAT analyses. On the other hand, substantial differences were revealed in the two Southern Hemisphere analyses, where the satellite soundings apparently add detail to the FGGE set.
Oxadiazole derivatives have been extensively studied for their specific and potent pharmacological property. Oxadiazole ring is susceptible to undergo electrophilic and nucleophilic substitution which makes it an interesting candidate to synthesize new derivatives with potential biological activity. Keeping in view their significance, the present work highlights the synthesis of a series of new oxadiazole derivatives from recycled poly(ethylene terephthalate) PET by chemical route. The aminolyzed product of PET i.e. terephthalic dihydrazide is being used for preparation of oxadiazole derivatives. The characterization of the synthesized product was done via FTIR, UV–visible, {sup 1}H-NMR and thermal analysis. The compounds showed potential antimicrobial activity against Candida albicans, Rhizopus, Bacillus cereus and Escherichia coli. Further, molecular docking of the compounds were studied for target proteins Sterol 14α-demethylase, TREX1, and Glucosamine-6-phosphate synthase. The binding energy between the target protein and ligand is calculated and interaction between the two is discussed. The antimicrobial activity carried out for the derivatives were in close correlation with in silico docking study performed.