Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

The impact of deep cumulus reflection on the ground-level global irradiance

The magnitude of solar irradiance reflected from deep cumulus clouds to the ground was evaluated using observations along the Front Range of Colorado. Solar-irradiance reflection around noon was found to cause increases of up to about 250 W/m sq. Enhancements of the global irradiance measured at the surface were observed to persist for 15-30 min. Occasionally, the increased global irradiance prevailed for a period of about 1 h. Model simulations implied similar patterns. It was evaluated that in some locations cloud reflection of solar irradiance may have a seasonal nonrandom pattern, thus increasing its significance. Estimation of the applied impact of cloud-reflected solar irradiance in several relevant situations is provided.

Segal, M.↗
NASA NTRS1991

Retrievals of surface reflectances from AVIRIS data

A method for retrieving surface reflectances from spectral data collected by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) is being developed. In this method, the integrated water vapor amount on a pixel by pixel basis is derived from the 0.94- and 1.14-micron water vapor features. The water vapor, carbon dioxide (CO2), oxygen (O2) and methane (CH4) transmission spectrum in the 0.4-2.5 micron region is calculated. The derived water vapor value and the solar and observational geometry are used in the calculation. The AVIRIS spectrum is ratioed against the transmission spectrum to obtain the surface reflectance spectrum. Major mineral absorption features near 2.2 microns in retrieved reflectance spectra can be identified. Different vegetation absorption characteristics are observed. At present, the method is most useful for deriving surface reflectances from AVIRIS data measured on clear days with high visibilities.

Gao, Bo-Cai↗
NASA NTRS1991

Salinity and spectral reflectance of soils

The basic spectral response related to the salt content of soils in the visible and reflective IR wavelengths is analyzed in order to explore remote sensing applications for monitoring processes of the earth system. The bidirectional reflectance factor (BRF) was determined at 10 nm of increments over the 520-2320-nm spectral range. The effect of salts on reflectance was analyzed on the basis of 162 spectral measurements. MSS and TM bands were simulated within the measured spectral region. A strong relationship was found in variations of reflectance and soil characteristics pertaining to salinization and desalinization. Although the individual MSS bands had high R-squared values and 75-79 percent of soil/treatment combinations were separable, there was a large number of soil/treatment combinations not distinguished by any of the four highly correlated MSS bands under consideration.

Szilagyi, A.↗
NASA NTRS1992

Prediction and measurement of soil bidirectional reflectance

The present model for soil bidirectional reflectance distribution functions in the visible and reflective IR ranges is based on a representation of soil surfaces by a collection of opaque spheres atop a Lambertian horizontal surface. The model is not sensitive to increases in the sphere area index beyond a value of 0.4. Observed soil reflectance factor data for a tilled field are noted to be consistent with those predicted by the model's expression of soil reflectance as a function of the horizontal area obscured by a sphere, the amount of surface in shadow, and relative brightness of a sphere, and the fraction of diffuse illumination.

Irons, James R.↗
NASA NTRS1992

Reflectance spectroscopy and GEX simulation of palagonite and iron-rich montmorillonite clay mixtures: Implications for the surface composition of Mars

Because of the power of remote sensing reflectance spectroscopy in determining mineralogy, it has been used as the major method of identifying a possible mineral analogue of the martian surface. A summary of proposed martian surface compositions from reflectance spectroscopy before 1979 was presented by Singer et al. Since that time, iron-rich montmorillonite clay, nanocrystalline or nanophase hematite, and palagonite have been suggested as Mars soil analogue materials. Palagonite in petrological terms is best described as an amorphous, hydrated, ferric iron, silica gel. Montmorillonite is a member of the smectite clay group, and its structure is characterized by an octahedral sheet in coordination with two tetrahedral sheets in which oxygen atoms are shared. The crystal unity of montmorillonite is well defined in contrast to palagonite where it is considered amorphous or poorly crystalline at best. Because of the absence of the diagnostic strong 2.2-micron reflectance band characteristic of clays in the near-infrared (NIR) spectrum of Mars and palagonite and based upon a consideration of wide wavelength coverage (0.3-50 microns), Roush et al. concluded that palagonite is a more likely Mars surface analogue. In spite of the spectral agreement of palagonite and the Mars reflectance spectrum in the 2.2-micron region, palagonite shows poor correspondence with the results of the Viking LR experiment. In contrast, iron-rich montmorillonite clays show relatively good agreement with the results of the Viking LR experiment. This spectral study was undertaken to evaluate the spectral properties of mixtures of palagonite and Mars analogue iron-rich montmorillonite clay (16-18 wt. percent Fe as Fe2O3) as a Mars surface mineralogical model. Mixtures of minerals as Mars surface analogue materials have been studied before, but the mixtures were restricted to crystalline clays and iron oxides.

Orenberg, J. B.↗
NASA NTRS1992

Quantifying reflectance anisotropy of photosynthetically active radiation in grasslands

Quantifying the vegetative surface's reflectance anisotropy was an important part of the First ISLSCP Field Experiment, as its major objectives focused on retrieval of surface parameters from satellite-derived reflectances. The explicit remote measurements for approximating the bidirectional reflectance distribution function (BRDF) of photosynthetically active radiation had not been previously undertaken. In this paper the proper expression of reflectance for BRDFs for retrieval of canopy parameters is assessed.

Middleton, Elizabeth M.↗
NASA NTRS1992

The role of specular reflectance in surface anisotropy

For smooth surfaces, specular reflection constitutes a major source of anisotropy in the surface bidirectional reflectance and introduces a strong illumination angle dependence in diurnal albedo. A prior formulation has been employed by the authors to account for the surface anisotropy of other natural surfaces. It is shown that this formulation is appropriate to successfully explain the specular characteristics of other rough surfaces as well as that of the ocean. The angular dependence of the diffuse component of the reflected radiance is explained using the Ahmad-Deering formulation, which is based on Chandrasekhar's radiative transfer solution. Results for a smooth silt-playa lake bed in a volcanic region of Nevada are presented. It is shown that this formulation is capable of explaining the specular features measured in the field and can be effectively used in any surface bidirectional reflectance model.

Ahmad, Suraiya P.↗
NASA NTRS1994

Low-Reflectance Surfaces For Solar Cells

Improved method for increasing solar cell efficiency has potential application for space-based and terrestrial solar power systems and optoelectronic devices. Etched low-angle grooves help recover reflected light. Light reflected from v-grooved surface trapped in cover glass and adhesive by total internal reflection. Reflected light redirected onto surface, and greater fraction of incident light absorbed, producing more electrical energy in InP solar photovoltaic cell.

Bailey, Sheila G.↗
NASA NTRS1994

Reflective Baffles For Telescope

Nonimaged light causing unacceptable heating rejected instead of absorbed. Precise reflective baffles incorporated into reflective telescope to prevent undesired portion of incident light from entering sensitive optical and electronic instruments in focal region of main reflector. In original intended application, telescope and associated instruments placed in geostationary orbit to observe selected area of Earth; undesired light solar reflected from adjacent areas of Earth or coming directly from Sun when line of sight to Sun lies near field of view. Terrestrial optical instruments also improved by installation of reflective baffles.

Hovis, Warren A.↗
NASA NTRS1994

Radiative transfer code based estimation of atmospheric parameters for inversion of imaging spectrometer measured radiance to apparent surface reflectance

Surface reflectance is required to quantitatively investigate molecular absorption and particle scattering properties of materials on the Earth's surface. Atmospheric aerosol optical depth, surface pressure and water vapor are required to constrain a radiative transfer code for the inversion of measured spectral radiance to apparent surface reflectance. A suite of algorithms using nonlinear least squares fitting techniques are described that directly estimate these atmospheric parameters from spectral radiance measured by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). The derived atmospheric parameters are used to constrain a radiative transfer code for the inversion of the imaging spectrometer radiance to apparent reflectance. The derived apparent reflectance is validated with respect to in situ measurement on the same target.

Green, Robert O.↗
NASA NTRS1994

Application of AI techniques to infer vegetation characteristics from directional reflectance(s)

Traditionally, the remote sensing community has relied totally on spectral knowledge to extract vegetation characteristics. However, there are other knowledge bases (KB's) that can be used to significantly improve the accuracy and robustness of inference techniques. Using AI (artificial intelligence) techniques a KB system (VEG) was developed that integrates input spectral measurements with diverse KB's. These KB's consist of data sets of directional reflectance measurements, knowledge from literature, and knowledge from experts which are combined into an intelligent and efficient system for making vegetation inferences. VEG accepts spectral data of an unknown target as input, determines the best techniques for inferring the desired vegetation characteristic(s), applies the techniques to the target data, and provides a rigorous estimate of the accuracy of the inference. VEG was developed to: infer spectral hemispherical reflectance from any combination of nadir and/or off-nadir view angles; infer percent ground cover from any combination of nadir and/or off-nadir view angles; infer unknown view angle(s) from known view angle(s) (known as view angle extension); and discriminate between user defined vegetation classes using spectral and directional reflectance relationships developed from an automated learning algorithm. The errors for these techniques were generally very good ranging between 2 to 15% (proportional root mean square). The system is designed to aid scientists in developing, testing, and applying new inference techniques using directional reflectance data.

Kimes, D. S.↗
NASA NTRS1994

Design of teleoperation system with a force-reflecting real-time simulator

We developed a force-reflecting teleoperation system that uses a real-time graphic simulator. This system eliminates the effects of communication time delays in remote robot manipulation. The simulator provides the operator with predictive display and feedback of computed contact forces through a six-degree of freedom (6-DOF) master arm on a real-time basis. With this system, peg-in-hole tasks involving round-trip communication time delays of up to a few seconds were performed at three support levels: a real image alone, a predictive display with a real image, and a real-time graphic simulator with computed-contact-force reflection and a predictive display. The experimental results indicate the best teleoperation efficiency was achieved by using the force-reflecting simulator with two images. The shortest work time, lowest sensor maximum, and a 100 percent success rate were obtained. These results demonstrate the effectiveness of simulated-force-reflecting teleoperation efficiency.

Hirata, Mitsunori↗
NASA NTRS1993

Application of a two-stream radiative transfer model for leaf lignin and cellulose concentrations from spectral reflectance measurements, part 1

Lignin and nitrogen contents of leaves constitute the primary rate-limiting parameters for the decomposition of forest litter, and are determinants of nutrient- and carbon-cyclic rates in forest ecosystems (Melillo et al., 1982). Wessman et al. (1988a) developed empirical multivariate relationships between forest canopy lignin amount and the (first-difference) AIS spectral response in three bands spread over the wavelength interval 1256-1555 nm. Wessman et al. (1988b) and McLellan et al. (1991) developed similar regression relationships from laboratory reflectance measurements on dried samples prepared in a standard fashion. They used four to six infrared bands for analysis of nitrogen, lignin and cellulose content of foliage in forest and prairie species. In the present article (Parts 1 and 2) the feasibility of compositional determinations is explored using positions of composite absorption bands that originate from mixtures of lignin, cellulose, and possibly other chemical constituents in the spectral reflectance of green leaves. To carry out this program, we employ full-spectral-resolution single-leaf diffuse reflectance measurements made with a laboratory spectrometer and integrating sphere. The leaf and other chemical reflectance data compiled by Elvidge (1990) have also been utilized extensively.

Conel, James E.↗
NASA NTRS1995

An algorithm for chlorophyll using first difference transformations of AVIRIS reflectance spectra

Experimental results have shown the existence of a strong relationship between chlorophyll alpha concentration and remote sensing reflectance measured at lake level with a high resolution spectroradiometer. The objective of our study was to investigate the relationship between surface chlorophyll alpha concentration at Mono Lake and water reflectance retrieved from Airborne Visible - Infrared Imaging Spectrometer (AVIRIS) data obtained in october 7, 1992. AVIRIS data were atmospherically corrected as described by Green et al. A description of the lake-level sampling is found in Melack and Gastil. The relationship between chlorophyll concentration and both the single band reflectance and the first difference transformation of the reflectance spectra for the first 40 AVIRIS spectral bands (400 nm to 740 nm) was examined. The relationship was then used to produce a map of the surface chlorophyll distribution.

Novo, Evlyn↗
NASA NTRS1995

Impact of differences in the solar irradiance spectrum on surface reflectance retrieval with different radiative transfer codes

Surface reflectance retrieval from imaging spectrometer data as acquired with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has become important for quantitative analysis. In order to calculate surface reflectance from remotely measured radiance, radiative transfer codes such as 5S and MODTRAN2 play an increasing role for removal of scattering and absorption effects of the atmosphere. Accurate knowledge of the exo-atmospheric solar irradiance (E(sub 0)) spectrum at the spectral resolution of the sensor is important for this purpose. The present study investigates the impact of differences in the solar irradiance function, as implemented in a modified version of 5S (M5S), 6S, and MODTRAN2, and as proposed by Green and Gao, on the surface reflectance retrieved from AVIRIS data. Reflectance measured in situ is used as a basis of comparison.

Staenz, K.↗
NASA NTRS1994

Nonthermal pair models reflection and X-ray spectral variability of active galaxies

Standard nonthermal electron-positron pair cascades, including the effects of reflection from an accretion disk, can explain reasonably well the mean spectra of low-luminosity, Seyfert-type active galaxies. We test this model using the spectral variability observed by EXOSAT between 0.05 and 10 keV in five active galaxies: NGC 5548, 3C 120, 3C 273, NGC 7469, and MCG 2-58-22. We find that pair-reflection models fail to reproduce the full range of spectra observed, particularly very hard spectra with a strong soft X-ray excess. Either the pair-reflection model is not an accurate description of the emission process in these objects or extrinsic effects, such as enhancement of the reflection component and/or a partially ionized absorber with a large column density, are responsible for much of the observed spectral variability.

Grandi, P.↗
NASA NTRS1994

Spectral reflectance properties of carbon-bearing materials

The 0.3-2.6 micrometers spectral reflectance properties of carbon polymorphs (graphite, carbon black, diamond), carbides (silicon carbide, cementite), and macromolecular organic-bearing materials (coal, coal tar extract, oil sand, oil shale) are found to vary from sample to sample and among groups. The carbon polymorphs are readily distinguishable on the basis of their visible-near infrared spectral slopes and shapes. The spectra of macromolecular organic-bearing materials show increases in reflectance toward longer wavelengths, exceeding the reflectance rise of more carbon-rich materials. Reflectance spectra of carbonaceous materials are affected by the crystal structure, composition, and degree of order/disorder of the samples. The characteristic spectral properties can potentially be exploited to identify individual carbonaceous grains in meteorites (as separates or in situ) or to conduct remote sensing geothermometry and identification of carbonaceous phases on asteroids.

Cloutis, Edward A.↗
NASA NTRS1994

Limits on coronal reflection using high-frequency solar oscillations

Acoustic waves in the Sun with frequencies above about 5.3 mHz can propagate in the chromosphere. We examine imaged solar intensity data for evidence of reflection of these waves in the upper chromosphere, where the temperature increases by a large factor over a short distance. Our method is to compare the observed and theoretically derived frequency spacings between peaks in the power spectrum. We find that our theoretical frequencies provide the best fit to the data when the reflection in the upper atmosphere is eliminated. In particular, the model of Kumar (1993b), which includes the source depth, and radiative damping, in the calculation of power spectra but ignores chromospheric reflection, gives peak frequencies that are in good agreement with the observations. For acoustic waves of frequency greater than 6 mHz we put an upper limit to the reflectivity of chromosphere and corona, using our method, of about 10%. At a given spherical harmonic degree, the frequency spacing between peaks in the data generally decreases with increasing frequency, because the lower turning point of the waves is moving inward. However, between 5 and 5.5 mHz the frequency spacing increases slightly. This feature is probably associated with the acoustic cutoff frequency in the solar atmosphere, i.e., it indicates a transition from trapped waves to propagating waves. We are able to reproduce the observed behavior by a crude modeling of the solar atmosphere. Further study of these peaks should provide an independent way of exploring the mean structure of the solar atmosphere, particularly around the temperature minimum region.

Kumar, P.↗