Search NASA⌕ Search

SEARCH · Search NASA

Results for “REMOVAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The removal of soluble species by warm stratiform clouds

The development of a one-dimensional, time-dependent model to study the removal of soluble gases from a warm, precipitating stratiform cloud is reported. The model calculates the distributions of water vapor and condensed water, in the form of cloud drops and raindrops, as well as the in-cloud concentration of a soluble species in the gas and aqueous phases for a specified profile of pressure and temperature and an assumed updraft velocity. Highly soluble gases are found to be rapidly dissolved into cloud droplets and then slowly incorporated into raindrops as cloudwater is converted to rainwater. The rainout rate for highly soluble species is found to be ultimately limited by the rate at which new gaseous material can be transferred from the cloud-free air into the cloud. The model calculations indicate that turbulence represents an important mechanism by which highly soluble gases are transported into stratiform clouds.

Qin, YU↗
NASA NTRS1987

Removal of spurious modes encountered in solving stability problems by spectral methods

A technique based on the Galerkin approximation is developed to remove spurious roots arising when Chebyshev spectral methods are used to solve eigenvalue problems in hydrodynamic stability. The derivation of Galerkin-Chebyshev approximations is explained, and numerical results for the Orr-Sommerfeld equations of plane Poiseuille flow and a Blasius profile are presented in tables and compared with those obtained by the method of Zebib (1984). It is pointed out that the present method does not increase the size of the algebraic system to be solved.

Zebib, Abdelfattah↗
NASA NTRS1988

Dowel Remover

Special tool pulls dowel pins straight out of blind holes. Removes dowels without damaging them or possibly injuring user. Accepts most common dowel sizes, 1/8 to 5/8 inch. Tool is simple and inexpensive. Made from screw, threader bar, slotted pipe, and nut.

Blisse, Jerry↗
NASA NTRS1988

Localized coating removal using plastic media blasting

Steps taken to qualify the use of plastic media blasting for safely and effectively removing paint and other coatings from solid rocket booster aluminum structures are described. As a result of the effort, an improvement was made in the design of surface finishing equipment for processing flight hardware, in addition to a potentially patentable idea on improved plastic media composition. The general arrangement of the blast equipment and the nozzle configuration are presented.

Novak, Howard L.↗
NASA NTRS1989

Removing Hidden Lines For Thermal Analysis

TRASYS Hidden Line Program, TEKHIDN, developed to aid thermal engineer in viewing objects for thermal analysis. Designed to be run in conjunction with Rockwell International version of TRASYS thermal-analyzer program. TEKHIDN generates images of three-dimensional structures without showing background lines of objects. Hidden-line-removal aspect of program enables user to picture accurately orientations of objects being studied. Designed to be implemented on DEC VAX minicomputer using VAX VMS level 4.2 to 4.5. Tektronix terminal and Plot10 library required.

Rivera, R.↗
NASA NTRS1988

Atmospheric effect removal from space imagery

A method to derive a ground reflectance scene from space imagery by removing the contribution of atmospheric radiance was developed. The method utilizes a multiple scattering radiative transfer code to model the Earth-atmosphere system and converts the output into a set of quadratic coefficients which best fit the relationships between the upwelling radiance reaching the sensor and the lower boundary conditions of the ground reflectance. Pixel by pixel correction of the atmospheric effects is done by invoking these coefficients. The algorithm was applied to a number of Thematic Mapper and CZCS data to generate interesting ground scenes and was used to simulate space imagery from ground reflectance scenes.

Kim, Hongsuk H.↗
NASA NTRS1988

A model to predict the removal of oxygen from air using a zirconia solid electrolyte membrane

A finite difference mathematical model has been developed to predict the removal of oxygen from air using a zirconia separation cell. The model predicts the electrical and mass transfer processes in circular disk cells with either axial or radial current flow in the electrodes and in tubular cells with axial current flow in the electrodes. Representative results are presented and discussed.

Marner, W. J.↗
NASA NTRS1988

Economical in-situ processing for orbital debris removal

This paper proposes and develops the first description of a concept for the removal of large pieces of orbital debris. After a brief discussion of the growing importance of the general problem of orbital debris, the idea of utilizing local resources for clearing the debris is introduced. A description of the initial terrestrially working hardware and future projections for this Autonomous Space Processor for Orbital Debris concludes this paper.

Ramohalli, Kumar↗
NASA NTRS1990

Removing Burrs In Confined Spaces

Special tool proposed to remove burrs on ring edges left by operations of hollow mill near bases of round posts. Conceived because posts placed so closely together that ordinary and makeshift tools damage adjacent posts and difficult or impossible to use in narrow, deep spaces surrounding edges to be deburred. Designed specifically for use on hollow liquid-oxygen-injector posts of spacecraft engine, general tool concept adaptable to similar deburring problems on otherwise inaccessible parts.

Windbiel, Friedrich↗
NASA NTRS1987

Proof of principal for staircase auger chip removal theory

A proof of principal design of the staircase auger theory is provided for lunar drilling. The drill is designed to drill holes 30 meters deep and 0.1 meters in diameter. The action of the auger is 0.01 meter strokes at a varying number of strokes per second. A detailed analysis of the interaction of the auger and particle was done to optimize the parameters of the auger. This optimum design will allow for proper heat removal and reasonable drilling time. The drill bit is designed to scoop the particles into the auger while efficiently cutting through the moon's surface.

Barron, Jeffrey B.↗
NASA NTRS1990

Selective removal of organics for water reclamation

Electrooxidation is a means of removing organic solutes directly from waste waters without the use of chemical expendables. The feasibility of the concept for oxidation of organic impurities common to urine, shower waters and space habitat humidity condensates was demonstrated. Electrooxidation of urine and waste water ersatz was experimentally demonstrated. The electrooxidation principle, reaction kinetics, efficiency, power, size, experimental test results and water reclamation applications are described. Process operating potentials and the use of anodic oxidation potentials that are sufficiently low to avoid oxygen formation and chloride oxidation are also described. The design of a novel electrochemical system that incorporates a proton exchange membrane (PEM) electrolyte is presented based on parametric test data and current fuel cell technology.

Murphy, Oliver J.↗
NASA NTRS1989

Removal of orbital debris

The several methods presently identified for the reduction of orbital debris populations are broadly classifiable as either preventive or remedial, and fall within distinctive operational regimes. For all particles, (1) in the 250-2000-km altitude band, intelligent sweepers may be used; (2) for large objects, in the 80-250-km altitude band, orbital decay renders removal impractical; (3) for the 250-750-km altitude band, deorbit devices should be used; (4) for 750-2500-km altitude, OMV rendezvous for propulsive deorbit package attachment is foreseeable; and beyond 2500 km, (5) propulsive escape from earth orbit is required.

Petro, Andrew J.↗
NASA NTRS1990

Chemical removal of contaminants from thin film Bi4Sr3Ca3Cu4O(16 + x) surfaces

A solution of Br in absolute ethanol, previously shown to be effective in removing nonsuperconducting species from Y-Ba-Cu-O thin film surfaces, is shown also to be effective in treating Bi-Sr-Ca-Cu-O thin film surfaces. X-ray photoelectron spectra obtained after etching are consistent with previously reported results obtained from samples cleaved or scraped in vacuum.

Vasquez, R. P.↗
NASA NTRS1991

Hot Oil Removes Wax

Mineral oil heated to temperature of 250 degrees F (121 degrees C) found effective in removing wax from workpieces after fabrication. Depending upon size and shape of part to be cleaned of wax, part immersed in tank of hot oil, and/or interior of part flushed with hot oil. Pump, fittings, and ancillary tooling built easily for this purpose. After cleaning, innocuous oil residue washed off part by alkaline aqueous degreasing process. Serves as relatively safe alternative to carcinogenic and environmentally hazardous solvent perchloroethylene.

Herzstock, James J.↗
NASA NTRS1991

Removing Spilled Oil With Liquid Nitrogen

Technique proposed to reduce more quickly, contain, clean up, and remove petroleum products and such other pollutants as raw sewage and chemicals without damage to humans, animals, plants, or the environment. Unique and primary aspect of new technique is use of cryogenic fluid to solidify spill so it can be carried away in solid chunks. Liquid nitrogen (LN2), with boiling point at -320 degrees F (-196 degrees C), offers probably best tradeoff among extreme cold, cost, availability, and lack of impact on environment among various cryogenic fluids available. Other applications include extinguishing fires at such locations as oil derricks or platforms and at tank farms containing such petroleum products as gasoline, diesel fuel, and kerosene.

Snow, Daniel B.↗
NASA NTRS1991

Adsorbent Removes Traces Of Oxygen

An adsorbent, carbon molecular sieve containing copper oxide, selectively removes oxygen from gas mixtures, producing gas containing less than 1 part per billion of oxygen. Used to help prevent oxidation of chemicals being prepared in dry boxes or to extract undesired traces of oxygen from inert-gas chambers in which flammable gases are stored.

Sharma, Pramod K.↗
NASA NTRS1991

Zeolites Remove Sulfur From Fuels

Zeolites remove substantial amounts of sulfur compounds from diesel fuel under relatively mild conditions - atmospheric pressure below 300 degrees C. Extracts up to 60 percent of sulfur content of high-sulfur fuel. Applicable to petroleum refineries, natural-gas processors, electric powerplants, and chemical-processing plants. Method simpler and uses considerably lower pressure than current industrial method, hydro-desulfurization. Yields cleaner emissions from combustion of petroleum fuels, and protects catalysts from poisoning by sulfur.

Voecks, Gerald E.↗
NASA NTRS1991

Removing Ambiguities In Remotely Sensed Winds

Algorithm removes ambiguities in choices of candidate ocean-surface wind vectors estimated from measurements of radar backscatter from ocean waves. Increases accuracies of estimates of winds without requiring new instrumentation. Incorporates vector-median filtering function.

Shaffer, Scott J.↗