Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Using DSCOVR EPIC as a Transfer Radiometer to Scale Leo Imagers to the Same Calibration Reference

The NASA CERES project provides climate-quality observed TOA and computed surface fluxes to the climate community. The CERES instruments are on board the Terra, Aqua, Suomi-NPP, and NOAA-20 low earth orbiting (LEO) satellites, where they are used in tandem with the MODIS and VIIRS instruments to retrieve cloud properties required for converting CERES radiance observations into fluxes. The CERES project radiometrically scales the MODIS and VIIRS imager visible channel radiances to the Aqua-MODIS reference to retrieve consistent imager cloud properties between sensors. The NPP, NOAA-20, and the future NOAA-21 VIIRS imagers will be in the same sun-synchronous orbit but spaced equally apart, allowing for no simultaneous nadir overpasses (SNO) to inter-calibrate the VIIRS imagers to each other. Currently, the CERES project uses Aqua-MODIS to radiometrically scale between VIIRS imagers. Once the Terra and Aqua satellites start drifting toward the terminator, Aqua can no longer be utilized as the transfer radiometer between VIIRS sensors and there will be no SNOs in common between neither MODIS nor VIIRS imagers. The DSCOVR satellite orbits the Lagrange-1 (L1) point about 1.5 million kilometers from Earth. The Earth Polychromatic Imaging Camera (EPIC) instrument on the Earth-facing side of DSCOVR takes images ranging from the UV to the NIR of the sunlit side of the Earth. While the EPIC sensor has no onboard calibration systems, multiple inter-calibration studies have indicated that the EPIC instrument response is radiometrically stable. The stability of the EPIC instrument allows it to be used as a transfer radiometer between all MODIS and VIIRS imagers. The study will demonstrate the use of EPIC to radiometrically scale VIIRS and MODIS imagers to the same Aqua-MODIS calibration reference. The EPIC-based NPP and N20-VIIRS scaling factors will be compared with the Aqua-MODIS based NPP and N20-VIIRS scaling factors.

C. O. Haney↗
NASA NTRS2022

Constrained Reference Star Differential Imaging: Enabling High-fidelity Imagery of Highly Structured Circumstellar Disks

High-contrast imaging presents us with the opportunity to study circumstellar disks and the planets still embedded within them, providing key insights into the formation and evolution of planetary systems. However, the postprocessing techniques that are often needed to suppress stellar halo light typically result in significant and variable loss of circumstellar light, even when using relatively conservative approaches like reference star differential imaging (RDI). We introduce “constrained reference star differential imaging” (constrained RDI), a new class of RDI point-spread-function (PSF) subtraction techniques for systems with circumstellar disks. Constrained RDI utilizes either high-resolution polarized-intensity (PI) images or disk models to severely limit or even eliminate the signal loss due to oversubtraction that is common to RDI. We demonstrate the ability of constrained RDI utilizing polarimetric data to yield an oversubtraction-free detection of the AB Aurigae protoplanetary disk in total intensity. PI-constrained RDI allows us to decisively recover the spectral signature of the confirmed, recently discovered protoplanet, AB Aurigae b. We further demonstrate that constrained RDI can be a powerful analysis tool for soon-to-be-acquired James Webb Space Telescope coronagraphic imaging of disks. In both cases, constrained RDI provides analysis-ready products that enable more detailed studies of disks and more robust verification of embedded exoplanets.

Kellen Lawson↗
NASA NTRS2023

Exploration of Design Drivers for the RVLT Lift+Cruise Reference Aircraft

A trade study was performed on an all-electric version of the Lift+Cruise urban air mobility reference aircraft developed under the Revolutionary Vertical Lift Technology Project. The trade study varied the input parameters of mission range, takeoff altitude, mission reserve time, cell specific energy, disk loading, and payload weight. A step-by-step incremental change in the input parameters was also examined. Analyses were performed using the NASA Design and Analysis of Rotorcraft tool and a Rapid Sizing Tool for electric vertical takeoff and landing aircraft. A comparison of the analysis results between the two tools shows good agreement in trends with differences in slope. Overall, the analysis shows that the Lift+Cruise configuration performs poorly on a NASA-defined, energy-dominated mission due to poor aerodynamic efficiency in forward flight. This poor cruise-flight efficiency results in a large energy requirement, which increases the required battery sizing and corresponding aircraft gross weight. As such, continued conceptual design and refinement of the Lift+Cruise reference aircraft by the RVLT Concepts Team will likely be limited.

UAM↗
NASA NTRSDate not supplied

Comparison and Analysis of the Venus Global Reference Atmospheric Model

The goal of this research was to analyze the Venus Global Reference Atmospheric Model (Venus-GRAM) and determine how accurately the model is following its primary source data from the Venus International Reference Atmosphere (VIRA). A comparative analysis between Venus-GRAM and the Venus Climate Database (VCD) was also conducted. The VCD is an atmospheric model developed by the Laboratoire de Météorologie Dynamique (LMD) for both scientific and engineering purposes. The purpose of this work is to ensure the most up-to-date data is being used to prepare for future probe and aerocapture missions.

Libby Cutler↗
NASA NTRS2025

Generalized Reference Targeting for Spaceflight

For spaceflight programs to achieve some of the aggressive exploration initiatives such as visiting and landing on other celestial bodies, rendezvousing with other orbiting vehicles, and ultimately returning crew safely to Earth, an assortment of targeting algorithms to compute the necessary burns to strategically maneuver a spacecraft to a variety of destinations are required. Numerous examples exist, but rather than creating and implementing multiple targeting solutions, is it possible to have a general targeting model that can accommodate a variety of applications? Originally motivated for mission design and analysis purposes, this paper outlines a generalized reference targeting algorithm for spaceflight that may also have applications in on-orbit flight software. It accommodates arbitrary flight dynamics and both impulsive and finite burns for either absolute or relative targeting applications. It also allows for an arbitrary number of targeting design parameters such as multiple discrete correction burns or finite thrust parameters to satisfy numerous combinations of targeting constraints that can have fixed or variable time epochs. Given a reference trajectory, this targeting technique provides a general framework to quickly solve an assortment of targeting problems that may be well-defined, over-determined, or under-determined while naturally producing metrics providing insight into the controllability for a given problem formulation. Due to the derivation, speed, and accuracy of the algorithm, it lends to supporting rapid linear covariance analysis and robust trajectory design applications for a variety of flight phases such as rendezvous and docking, cislunar transfer, interplanetary flight, orbit maintenance, de-orbit, and powered descent and landing.

Targeting↗
DOE OSTI2025

Reference Architecture Discussion [Slides]

NREL is developing reference architectures - industry-validated and verified models - to provide a common operational view and emulation environment for analyzing risk to the energy sector. In this presentation, we overview our work in developing these architectures.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2011

The Celestial Reference Frame at X/Ka-band (8.4/32 GHz)

A celestial reference frame at X/Ka-band (8.4/32 GHz) has been constructed using fifty-one 24-hour sessions with the Deep Space Network. We report on observations which have detected 436 sources covering the full 24 hours of right ascension and declinations down to -45 deg. Comparison of this X/Ka-band frame to the S/X-band (2.3/8.4 GHz) ICRF2 shows wRMS agreement of 200 micro-arcsec in a cos delta and 290 micro-arcsec in delta. There is evidence for zonal errors at the 100 micro-arcsec level. Known errors include limited SNR, lack of phase calibration, troposphere mismodelling, and limited southern geometry. The motivations for extending the ICRF to frequencies above 8 GHz are to access more compact source morphology for improved frame stability, to provide calibrators for phase referencing, and to support spacecraft navigation at Ka-band.

reference systems catalog↗
NASA NTRS2010

Use of Reference Frames for Interplanetary Navigation at JPL

Navigation of interplanetary spacecraft is typically based on range, Doppler, and differential interferometric measurements made by ground-based telescopes. Acquisition and interpretation of these observations requires accurate knowledge of the terrestrial reference frame and its orientation with respect to the celestial frame. Work is underway at JPL to reprocess historical VLBI and GPS data to improve realizations of the terrestrial and celestial frames. Improvements include minimal constraint alignment, improved tropospheric modeling, better orbit determination, and corrections for antenna phase center patterns.

International Celestial Reference Frame (ICRF)↗
NASA NTRS2010

The Celestial Reference Frame at X/Ka-band (8.4/32 GHz)

A celestial reference frame at X/Kaband (8.4/32 GHz) has been constructed using fiftyone 24-hour sessions with the Deep Space Network. We report on observations which have detected 436 sources covering the full 24 hours of right ascension and declinations down to -45 deg. Comparison of this X/Ka-band frame to the S/X-band (2.3/8.4 GHz) ICRF2 shows wRMS agreement of 200 micro-arcsec ( mu as) in alpha cos delta and 290 mu as in delta. There is evidence for zonal errors at the 100 mu as level. Known errors include limited SNR, lack of phase calibration, troposphere mismodelling, and limited southern geometry. The motivations for extending the ICRF to frequencies above 8 GHz are to access more compact source morphology for improved frame stability, to provide calibrators for phase referencing, and to support spacecraft navigation at Ka-band.

interferometry↗
NASA NTRS2021

Jupiter Global Reference Atmospheric Model (Jupiter-GRAM): User Guide

This Technical Memorandum (TM) presents the Jupiter Global Reference Atmospheric Model (Jupiter-GRAM) and the updated features of the GRAMs. Jupiter-GRAM is an engineering-oriented atmospheric model that estimates mean values of atmospheric properties for Jupiter. This TM summarizes the atmospheric data model in Jupiter-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Additional details regarding the Jupiter-GRAM input and output files and how to interpret Jupiter-GRAM results are also provided.

atmospheric models↗
NASA NTRS2021

Earth Global Reference Atmospheric Model (Earth-GRAM): User Guide

This Technical Memorandum (TM) presents the Earth Global Reference Atmospheric Model (Earth-GRAM) and the updated features of the GRAMs. Earth-GRAM is an engineering-oriented atmospheric model that estimates mean values and statistical variations of atmospheric properties for Earth. This TM summarizes the atmospheric data model in Earth-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Additional details regarding the Earth-GRAM input and output files and how to interpret Earth-GRAM results are also provided.

Atmospheric Models↗
NASA NTRS2021

Venus Global Reference Atmospheric Model (Venus-GRAM): User Guide

This Technical Memorandum (TM) presents the Venus Global Reference Atmospheric Model (Venus-GRAM) and the updated features of the GRAMs. Venus-GRAM is an engineering-oriented atmospheric model that estimates mean values and statistical variations of atmospheric properties for Venus. This TM summarizes the atmospheric data model in Venus-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Additional details regarding the Venus-GRAM input and output files and how to interpret Venus-GRAM results are also provided.

atmospheric models↗
NASA NTRS2021

Mars Global Reference Atmospheric Model (Mars-GRAM): User Guide

This Technical Memorandum (TM) presents the Mars Global Reference Atmospheric Model (Mars-GRAM) and the updated features of the GRAMs. Mars-GRAM is an engineering-oriented atmospheric model that estimates mean values and statistical variations of atmospheric properties for Mars. This TM summarizes the atmospheric data model in Mars-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Additional details regarding the Mars-GRAM input and output files and how to interpret Mars-GRAM results are also provided.

atmospheric models↗
NASA NTRS2024

Mars Global Reference Atmospheric Model (Mars-GRAM) 2024: User Guide

This Technical Memorandum (TM) presents the Mars Global Reference Atmospheric Model (Mars-GRAM) 2024 and its updated features. Mars-GRAM is an engineering-oriented atmospheric model that estimates mean values and statistical variations of atmospheric properties for Mars. This TM summarizes the atmospheric data model in Mars-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Additional details regarding the Mars-GRAM input and output files and how to interpret Mars-GRAM results are also provided.

atmospheric density↗
DOE OSTI2025

Mitigating Electrochemical Impedance Spectroscopy Artifacts in PEMWE Reference Electrode Measurements

This study investigates strategies to improve the quality of electrochemical impedance spectroscopy (EIS) measurements using reference electrodes (RE) in proton exchange membrane water electrolyzers (PEMWE). We demonstrate that adding a low impedance wire in parallel to the RE significantly enhances signal accuracy, especially at high frequencies. Additionally, we identify electrical pad heaters as a source of measurement noise. EIS measurements fulfilling Kramers–Kronig validity criteria were only achieved in their absence. These insights advance the diagnostic capabilities of REs in water electrolyzers and support more reliable, spatially resolved analysis of electrochemical losses within the cell.

08 HYDROGEN↗
DOE OSTI2024

Molecular Vision - Multimodal, multitask retrieval of molecular structure from measured signatures for reference-free compound identification

We are currently at risk of generating false conclusions based on limited methods to identify small molecules in biological systems and in chemical forensics. By definition, the chemical structures of novel small molecules have not been determined, let alone measured or synthesized. Currently, unambiguous structure determination of small molecules is constrained by the time and effort needed to isolate compounds and perform de novo structure elucidation using laboratory-based methods, significantly extending the time to inform mitigation strategies. To address this gap, we have developed a deep learning approach to directly map molecular structure to experimental signatures. We aim to unify measurement technologies employed in untargeted small molecule identification studies—such as infrared (IR) spectrometry, tandem mass spectrometry (MS/MS), ion mobility spectrometry-derived collision cross section (CCS)—through use of a multimodal, multitask deep learning architecture. Where existing methods require direct generation of information-rich spectra and/or properties, an inherently difficult task, we will simplify molecular signature-based identification by posing the problem as a recognition or retrieval task. The model is thus presented with relevant endpoints – structure and one or more molecular signatures – and need only determine whether they are semantically related. Thus, our approach offers the following advantages over existing techniques: (i) circumvents difficulties associated with direct generation of molecular signatures from structure and structure from signatures; (ii) incorporates multiple molecular signatures simultaneously, as available, to support identification; and (iii) enables rapid computation of structural embeddings toward broad coverage of known chemical space. Taken together, the approach removes the need to explicitly obtain or compute reference spectra, representing a powerful method for compound identification that requires only experimentally observed signatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermal Evaluation of CCS and NACS Reference Devices and Adapters

A review of NLR's work in charging system reliability for charging inlets, connectors, and adapters. The review includes a detailed discussion on (a) the development of a reference device for the thermal performance of charging connectors and adapters, (b) evaluation of charging adapters and their thermal warning and shutdown response, (c) implications of side-load from real-world implementations, and (d) strengthening the conformance evaluation for end caps based on field data.

33 ADVANCED PROPULSION SYSTEMS↗