Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulating Winter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Simulation of Radon-222 with the GEOS-Chem Global Model: Emissions, Seasonality, and Convective Transport

Radon-222 (Rn-222) is a short-lived radioactive gas naturally emitted from land surfaces and has long been used to assess convective transport in atmospheric models. In this study, we simulate Rn-222 using the GEOS-Chem chemical transport model to improve our understanding of Rn-222 emissions and surface concentration seasonality and characterize convective transport associated with two Goddard Earth Observing System (GEOS) meteorological products, the Modern-Era Retrospective analysis for Research and Applications (MERRA) and GEOS Forward Processing (GEOS-FP). We evaluate four global Rn-222 emission scenarios by comparing model results with observations at 51 surface sites. The default emission scenario in GEOS-Chem yields a moderate agreement with surface observations globally (68.9 % of data within a factor of 2) and a large underestimate of winter surface Rn-222 concentrations at Northern Hemisphere midlatitudes and high latitudes due to an oversimplified formulation of Rn-222 emission fluxes (1 atom cm−2 s−1 over land with a reduction by a factor of 3 under freezing conditions). We compose a new global Rn-222 emission scenario based on Zhang et al. (2011) and demonstrate its potential to improve simulated surface Rn-222 concentrations and seasonality. The regional components of this scenario include spatially and temporally varying emission fluxes derived from previous measurements of soil radium content and soil exhalation models, which are key factors in determining Rn-222 emission flux rates. However, large model underestimates of surface Rn-222 concentrations still exist in Asia, suggesting unusually high regional Rn-222 emissions. We therefore propose a conservative upscaling factor of 1.2 for Rn-222 emission fluxes in China, which was also constrained by observed deposition fluxes of 210Pb (a progeny of Rn-222). With this modification, the model shows better agreement with observations in Europe and North America (> 80 % of data within a factor of 2) and reasonable agreement in Asia (close to 70 %). Further constraints on Rn-222 emissions would require additional concentration and emission flux observations in the central United States, Canada, Africa, and Asia. We also compare and assess convective transport in model simulations driven by MERRA and GEOS-FP using observed Rn-222 vertical profiles in northern midlatitude summer and from three short-term airborne campaigns. While simulations with both GEOS products are able to capture the observed vertical gradient of Rn-222 concentrations in the lower troposphere (0–4 km), neither correctly represents the level of convective detrainment, resulting in biases in the middle and upper troposphere. Compared with GEOS-FP, MERRA leads to stronger convective transport of Rn-222, which is partially compensated for by its weaker large-scale vertical advection, resulting in similar global vertical distributions of Rn-222 concentrations between the two simulations. This has important implications for using chemical transport models to interpret the transport of other trace species when these GEOS products are used as driving meteorology.

Bo Zhang↗

Assimilation of GOES Land Surface Data into a Mesoscale Models

A technique has been developed for assimilating Geostationary Operational Environmental Satellite (GOES)-derived skin temperature tendencies and insolation into the surface energy budget equation of a mesoscale model so that the simulated rate of temperature change closely agrees with the satellite observations. A critical assumption of the technique is that the availability of moisture (either from the soil or vegetation) is the least known term in the model's surface energy budget. Therefore, the simulated latent heat flux, which is a function of surface moisture availability, is adjusted based upon differences between the modeled and satellite-observed skin temperature tendencies. An advantage of this technique is that satellite temperature tendencies are assimilated in an energetically consistent manner that avoids energy imbalances and surface stability problems that arise from direct assimilation of surface shelter temperatures. The fact that the rate of change of the satellite skin temperature is used rather than the absolute temperature means that sensor calibration is not as critical. The assimilation technique has been applied to the Oklahoma-Kansas region during the spring-summer 2000 time period when dynamic changes in vegetation cover occur. In April, central Oklahoma is characterized by large NDVI associated with winter wheat while surrounding areas are primarily rangeland with lower NDVI. In July the vegetation pattern reverses as the central wheat area changes to low NDVI due to harvesting and the surrounding rangeland is greener than it was in April. The goal of this study is to determine if assimilating satellite land surface data can improve simulation of the complex spatial distribution of surface energy and water fluxes across this region. The PSU/NCAR NM5 V3 system is used in this study. The grid configuration consists of a 36-km CONUS domain and a 12-km nest over the area of interest. Bulk verification statistics (BIAS and RMSE) of surface air temperature and dewpoint indicates that assimilation of the satellite data results reduces both the bias and RMSE for both state variables. In addition, comparison of model data with ARM/CART EBBR flux observations reveals that the assimilation technique adjusts the bowen ratio in a realistic fashion.

Lapenta, William M.↗

Comparison of Seasonal Terrestrial Water Storage Variations from GRACE with Groundwater-level Measurements from the High Plains Aquifer (USA)

This study presents the first direct comparison of variations in seasonal GWS derived from GRACE TWS and simulated SM with GW-level measurements in a semiarid region. Results showed that variations in GWS and SM are the main sources controlling TWS changes over the High Plains, with negligible storage changes from surface water, snow, and biomass. Seasonal variations in GRACE TWS compare favorably with combined GWS from GW-level measurements (total 2,700 wells, average 1,050 GW-level measurements per season) and simulated SM from the Noah land surface model (R = 0.82, RMSD = 33 mm). Estimated uncertainty in seasonal GRACE-derived TWS is 8 mm, and estimated uncertainty in TWS changes is 11 mm. Estimated uncertainty in SM changes is 11 mm and combined uncertainty for TWS-SM changes is 15 mm. Seasonal TWS changes are detectable in 7 out of 9 monitored periods and maximum changes within a year (e.g. between winter and summer) are detectable in all 5 monitored periods. Grace-derived GWS calculated from TWS-SM generally agrees with estimates based on GW-level measurements (R = 0.58, RMSD = 33 mm). Seasonal TWS-SM changes are detectable in 5 out of the 9 monitored periods and maximum changes are detectable in all 5 monitored periods. Good correspondence between GRACE data and GW-level measurements from the intensively monitored High Plains aquifer validates the potential for using GRACE TWS and simulated SM to monitor GWS changes and aquifer depletion in semiarid regions subjected to intensive irrigation pumpage. This method can be used to monitor regions where large-scale aquifer depletion is ongoing, and in situ measurements are limited, such as the North China Plain or western India. This potential should be enhanced by future advances in GRACE processing, which will improve the spatial and temporal resolution of TWS changes, and will further increase applicability of GRACE data for monitoring GWS.

Strassberg, Gil↗

Heat Pumps with Phase Change Thermal Storage: Flexible, Efficient, and Electrification Friendly

As we continue to electrify space- and water-heating, the electricity demand profile of many buildings will change significantly, and periods of high electricity demand will likely not align with renewable energy generation. We expect electricity demands will increase substantially in the winter, annual maximum electricity demands will increase, and more regions will experience annual peak electrical demands – and higher wholesale electricity prices – in the winter. This is especially important for cold climates where 60% of site energy use in buildings is for heating, and where heat pumps perform least efficiently. This paper focuses on one promising solution among the many paths to electrification: the use of phase change materials (PCM) for compact low-cost thermal energy storage (TES). We present the design and simulation of a combi heat pump and phase change thermal storage system used for space- and water-heating in a multifamily residence in a cold climate. To assess the benefits of this technology, we compare its annual performance to that of a current state-of-the-art air-to-air heat pump and separate heat pump water heater. Simulation results for IECC Climate Zone 6A reveal that the combi heat pump with phase change thermal storage can reduce the design size for heat pumps by 40-60%, reduce maximum electric demand by 30-50%, reduce electricity use during 4-12-hour load shed periods by 50%, and avoid the need for auxiliary electric resistance for both space- and water-heating. Tariff structures are highly varied between different utilities and currently reflect higher wholesale market prices for electricity during summer days. Consequently, although this system design provides large electric demand reductions during hypothetical 4-12-hour load shed periods, it does not provide energy cost reductions with current winter residential time-of-use tariffs.

Helmns, Dre↗

A New Ecosystem Model for Arctic Phytoplankton Phenology From Ice‐Covered to Open‐Water Periods: Implications for Future Sea Ice Retreat Scenarios

Abstract To predict ecosystem change in the Arctic Ocean, understanding Arctic phytoplankton phenology is essential. We develop a marine ecosystem model focusing on phytoplankton dynamics and the competition for multiple resources based on knowledge from in situ data obtained in the Chukchi Sea. The model is designed to include the unique ecological characteristics of the Arctic Ocean. To the best of our knowledge, this is the first model successfully simulating the current paradigm for Arctic phytoplankton phenology, including both under‐ice blooms and succession of phytoplankton groups. Sensitivity experiments show that the dominance of diatoms can be sustained by lateral transport of a high‐silicate water mass (Pacific Winter Water). Experiments for future scenarios show that sea ice retreat drives a decrease in large diatoms and an increase in the other relatively small non‐diatom groups. These results suggest that dominant phytoplankton groups can be shifted from diatoms to non‐diatoms under ongoing Arctic Ocean sea ice retreat.

Choi, Jang‐Geun↗

Nucleation of Grain Boundary Phases

Here, we derive a theory that describes homogeneous nucleation of grain boundary (GB) phases. Our analysis takes account of the energy resulting from the GB phase junction, the line defect separating two different GB structures, which is necessarily a dislocation as well as an elastic line force due to the jump in GB stresses. The theory provides analytic forms for the elastic interactions and the core energy of the GB phase junction that, along with the change in GB energy, determines the nucleation barrier. We apply the resulting nucleation model to simulations of GB phase transformations in tungsten. Our theory explains why under certain conditions GBs cannot spontaneously change their structure even to a lower energy state.

36 MATERIALS SCIENCE↗

Comparison of the impact of the 1982/83 and 1986/87 Pacific SST anomalies on time-mean predictions of atmospheric circulation

This study contrasts the impact of the ENSO SST anomalies observed during the Northern Hemisphere winters of 1982/83 and 1986/87 predictions with a GCM. The results of an analysis of the anomalous divergence and effective Rossby wave source in the tropical and subtropical Pacific during these two years indicate that the primary observed and simulated extratropical circulation features may have been forced from the subtropics other than the tropics. Relatively small magnitudes of the SST and precipitation anomalies in the subtropics make it probable that these subtropical divergence and Rossby wave source anomalies themselves were forced from the tropics.

Fennessy, M. J.↗

Effect of Interhemispheric Currents on Equivalent Ionospheric Currents in Two Hemispheres: Simulation Results

In this research, we used numerical simulation to study the effect of interhemispheric field-aligned currents (IHCs), going between two conjugate ionospheres in two hemispheres, on the equivalent ionospheric currents (EICs). We computed the maps of these EICs In two hemispheres during summer-winter conditions, when the effect of the IHCs is especially significant. The main results may be summarized as follows. In winter hemisphere, the IHCs may significantly exceed and be a substitute for the local R1 currents, and they may strongly affect the magnitude, location, and direction of the EICs In the nightside winter auroral ionosphere. While in summer polar cap the EICs tend to flow sunward, and in winter polar cap the EICs turn toward dawn due to the effect of the IHCs. The well-known reversal in the direction of the EICs in the vicinity of the midnight meridian, in winter hemisphere, is observed not at the polar caps boundary (as usually expected) but equatorward of this boundary in the region of the IHCs location. The IHCs in winter hemisphere may be, in fact, not only a substitute for the R1 currents but also the major source of the Westward Auroral Electrojet, observed In both hemispheres during substorm activity.

Lyatsky, Sonya↗

Effects of high-pressure hydrogen exposure on filler-elastomer adhesion

Elastomers are known to gain enhanced mechanical properties through compounding with nanosized filler particles such as silica or carbon black. Filler dispersion and filler-polymer interfacial strength are key contributing factors to this improvement. The interfacial strength is critical to part lifetime in pressurized gas sealing applications such as O-rings, where weak binding between the filler particle and polymer matrix can lead to internal void structures. With the aim to build a fundamental understanding of precursors to pressurized hydrogen-induced failure in elastomers, we use all-atom molecular dynamics simulations to study the impact of hydrogen oversaturation on filler-polymer interaction strength. We systematically study the interface between a commonly used elastomer, ethylene-propylene-diene monomer (EPDM) and silica by varying gas concentration, crosslink density, and surface chemistry. Our simulations predict that decompression leads to a localization of excess gas near the interface. In conclusion, we demonstrate that this localized gas can weaken interfacial adhesion and quantify the interaction using thermodynamic approaches.

EPDM↗

Enhanced Climatic Warming Over the Tibetan Plateau Due to Doubling CO2: A Model Study

A number of studies have presented the evidences that surface climate change associated with global warming at high elevation sites shows more pronounced warming than at low elevations, i.e. an elevation dependency of climatic warming pointed out that snow-albedo feedback may be responsible for the excessive warming in the Swiss Alps. From an ensemble of climate change experiments of increasing greenhouse gases and aerosols using an air-sea coupled climate model, Eyre and Raw (1999) found a marked elevation dependency of the simulated surface screen temperature increase over the Rocky Mountains. Using almost all available instrumental records, Liu and Chen (2000) showed that the main portion of the Tibetan Plateau (TP) has experienced significant ground temperature warming since the middlebrows, especially in winter, and that there is a tendency for the warming trend to increase with elevation in the TP as well as its surrounding areas. In this paper, we will investigate the mechanism of elevation dependency of climatic warming in the TP by using a high-resolution regional climate model.

Chen, Baode↗

Interseasonal Variations in the Middle Atmosphere Forced by Gravity Waves

In our Numerical Spectral Model (NSM), which incorporates Hines' Doppler Spread Parameterization, gravity waves (GW) propagating in the east/west direction can generate the essential features of the observed equatorial oscillations of the zonal circulation and in particular the QBO (quasi-biennial oscillation) extending from the stratosphere into the upper mesosphere. We report here that the NSM also produces inter-seasonal variations in the zonally symmetric meridional circulation. A distinct meridional oscillation (MO) is generated, which appears to be the counterpart to the QBO. With a vertical grid-point resolution of about 0.5 km, the NSM produces the MO through momentum deposition of GW's propagating in the north/south direction. This process is inherently non-linear, of third (odd) order, which enables the oscillation. Since the meridional winds are relatively small compared to the zonal winds, the vertical wavelength required to maintain the MO is also smaller, i.e., only about 10 km instead of the 30 km for the QBO. The corresponding viscous stress is then larger, and the period of the MO is thus short compared with that of the QBO, i.e., only about 3 to 4 months. Depending on the strength of the GW forcing, the computed amplitudes of the meridional wind oscillation are typically 5 m/s in the upper stratosphere and mesosphere, and the associated temperature amplitudes are between about 2 and 3 K. These amplitudes may be observable with the instruments on the TIMED spacecraft. Extended computer simulations with the NSM in 2D and 3D reveal that the MO at low latitudes is modulated by the QBO and in turn can influence it to produce a hemispherically asymmetric component. The annual circulation from the summer to the winter hemisphere is likely to play an important role.

Mayr, H. G.↗

Molecular Dynamics Simulations of a Liquid Metal Wetting Zirconia Suboxides

Molecular dynamics simulations were performed of a liquid metal (Ag) interacting with various zirconia suboxides to calculate the work of adhesion between the liquid metal and the suboxides. These simulations were then used to assess the impact of oxygen content on wetting. The results of this work show a wetting transition as oxygen content is reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PMR polyimide/graphite fiber composite fan blades

Ultrahigh speed fan blades, designed in accordance with the requirements of an ultrahigh tip speed blade axial flow compressor, were fabricated from a high strength graphite fiber tow and a PMR polyimide resin. The PMR matrix was prepared by combining three monomeric reactants in methyl alcohol, and the solution was applied directly to the reinforcing fiber for subsequent in situ polymerization. Some of the molded blades were completely finished by secondary bonding of root pressure pads and an electroformed nickel leading edge sheath prior to final machining. The results of the spin testing of nine PMR fan blades are given. Prior to blade fabrication, heat resin tensile properties of the PMR resin were examined at four formulated molecular weight levels. Additionally, three formulated molecular weight levels were investigated in composite form with both a high modulus and a high strength fiber, both as-molded and postcured, in room temperature and 232 C transverse tensile, flexure and short beam shear. Mixed fiber orientation panels simulating potential blade constructions were also evaluated. Flexure tests, short beam shear tests, and tensile tests were conducted on these angle-plied laminates.

Cavano, P. J.↗

Serial multiplier arrays for parallel computation

Arrays of systolic serial-parallel multiplier elements are proposed as an alternative to conventional SIMD mesh serial adder arrays for applications that are multiplication intensive and require few stored operands. The design and operation of a number of multiplier and array configurations featuring locality of connection, modularity, and regularity of structure are discussed. A design methodology combining top-down and bottom-up techniques is described to facilitate development of custom high-performance CMOS multiplier element arrays as well as rapid synthesis of simulation models and semicustom prototype CMOS components. Finally, a differential version of NORA dynamic circuits requiring a single-phase uncomplemented clock signal introduced for this application.

Winters, Kel↗

The Role of the SO2 Radiative Effect in Sustaining the Volcanic Winter and Soothing the Toba Impact on Climate

Volcanic eruptions are an important climate driver. The impact of Pinatubo-sized eruptions has been observed and is well constrained. The magnitude and duration of volcanic winter effects after super-eruptions such as Toba remain disputed due to disagreement between the strong cooling predicted by models, and much milder climate perturbations according to the paleo data. Here we present a re-evaluated climate impact of a Toba-sized super-eruption based on up-to-date GISS ModelE simulations. In this study, we account for all known primary mechanisms that govern the evolution of the volcanic plume and their nonlinear interactions. The SO2 radiative effects are evaluated for the first time in coupled climate simulations with the interactive atmospheric chemistry module. We found that SO2 effects on photochemistry, dynamics, and radiative forcing are especially prominent. Due to strong absorption in ultraviolet, SO2 feedback on photochemistry partially offsets the limiting effect associated with aerosol microphysical processes. SO2 greenhouse warming soothes the radiative cooling exerted by sulfate aerosols. SO2 absorption in the shortwave and longwave causes radiative heating and lofting of the volcanic plume, and boosts the efficiency of SO2 impact on photochemistry. Our analysis shows that SO2 lifetime and magnitude of effects scale up and increase with the amount of emitted material. For a Pinatubo-sized eruption, SO2 feedbacks on chemistry and dynamics are relevant only during the initial stage of the volcanic plume evolution, while local SO2 concentrations are high. For a Toba-sized eruption, SO2 effects are as important as sulfate aerosols, and produce a less extreme volcanic winter.

Sergey Osipov↗

Complete inhibition of a polyol nucleation by a micromolar biopolymer additive

Preventing spontaneous crystallization of supersaturated solutions by additives is of critical interest to successful process design and implementation, with numerous applications in chemical, pharmaceutical, medical, pigment, and food industries, but challenges remain in laboratory and industry settings and fundamental understanding is lacking. When copresented with antifreeze proteins (AFPs), otherwise spontaneously crystallizing osmolytes are maintained at high supersaturations for months in over-wintering organisms. Thus, we here explore the inhibition phenomenon by AFPs, using persistent crystallization of a common sugar alcohol, D-mannitol, as a case study. We report experimentally that DAFP1, an insect AFP, completely inhibits D-mannitol nucleation. Computer simulations reveal a new mechanism for crystallization inhibition where the population of the crystal-forming conformers are selectively bound and randomized in solution by hydrogen bonding to the protein surface. These results highlight the advantages of using natural polymers to address crystallization inhibition challenges and suggest new strategies in controlling the nucleation processes.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling Diurnal and Annual Ethylene Generation from Solar-Driven Electrochemical CO 2 Reduction Devices

Integrated solar fuels devices for CO 2 reduction (CO 2 R) are a promising technology class towards achieving net-negative carbon emissions. Designing integrated CO 2 R solar fuels devices requires careful co-design of electrochemical and photovoltaic components as well as consideration of the diurnal and seasonal effects of solar irradiance, temperature, and other meteorological factors expected for ‘on-sun’ deployment. Here, using a photovoltaic-electrochemical (PV-EC) platform, we developed a temperature and potential-dependent diurnal and annual model using experimental CO 2 R performance of Cu-based electrocatalysts, local meteorological data from the National Solar Radiation Database (NSRD), and modeled performance of commercial c-Si PVs. We simulated diurnal product outputs with and without the effects of ambient temperature to determine gaseous product temperature sensitivity. From these outputs, we observed seasonal variation in gaseous product generation, with up to two-fold increases in ethylene productivity between the Winter and Summer, analyzed the consequences of dynamic cloud coverage, and identified periods where device cooling/heating mechanisms could be implemented to maximize ethylene generation. Finally, we modeled the annual ethylene generation for a scaled 1 MW solar farm at three different locations (Beijing, CN; Sydney, AUS; Barstow, CA) to determine the consequences of local meteorological climates on PV-EC CO 2 R product output, recording a maximum ethylene output of 18.5 tonne/yr at Barstow. Overall, this model presents a critical tool for streamlining the translation of experimental solar-driven electrochemical research to real-world implementation.

Yap, Kyra M. K.↗

Theoretical and experimental studies of atmospheric structure and dynamics, using high altitude chemical release, Radio meteor, and meteorological rocket network and other data

Data collected by the Georgia Tech Radio Meteor Wind Facility during the fall and winter of 1975 are analyzed indicating a relationship between lower thermospheric circulation at mid latitudes and polar stratospheric dynamics. Techniques of measurement of mixing processes in the upper atmosphere and the interpretation of those measurements are described along with a diffusion simulation program based on the Global Reference Atmosphere program.

Edwards, H. D.↗