Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Neutron Yield Study of Direct-Drive, Low-Adiabat Cryogenic D2 Implosions on OMEGA Laser System

Neutron yields of direct-drive, low-adiabat (alpha ~~ 2 to 3) cryogenic D2 target implosions on the OMEGA laser system [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] have been systematically investigated using the two-dimensional (2D) radiation hydrodynamics code DRACO [P. B. Radha et al., Phys. Plasmas 12, 056307 (2005)]. Low-mode (ell <- 12) perturbations, including initial target offset, ice-layer roughness, and laser-beam power imbalance, were found to be the primary source of yield reduction for thin-shell (5 um), low-alpha, cryogenic targets. The 2D simulations of thin-shell implosions track experimental measurements for different target conditions and peak laser intensities ranging from 2.5 x 10^14–6 x 10^14 W/cm^2. Simulations indicate that the fusion yield is sensitive to the relative phases between the target offset and the ice-layer perturbations. The results provide a reasonable good guide to understanding the yield degradation in direct-drive, low-adiabat, cryogenic, thin-shell-target implosions. Thick-shell (10 um) implosions generally give lower yield over clean than low-ell-mode DRACO simulation predictions. Simulations including the effect of laser-beam nonuniformities indicate that high-ell-mode perturbations caused by laser imprinting further degrade the neutron yield of thick-shell implosions. To study ICF compression physics, these results suggest a target specification with a <-30 um offset and ice-roughness of sigma_rms < 3 um are required.

Hu, S X↗

TU-FG-BRB-06: A Prompt Gamma-Ray Spectroscopy System for Clinical Studies of in Vivo Proton Range Verification

Purpose: We present a new system to perform prompt gamma-ray spectroscopy during proton pencil-beam scanning treatments, which enables in vivo verification of the proton range. This system will be used for the first clinical studies of this technology. Methods: After successful pre-clinical testing of prompt gamma-ray spectroscopy, a full scale system for clinical studies is now being assembled. Prompt gamma-rays will be detected during patient treatment using an array of 8 detector modules arranged behind a tungsten collimator. Each detector module consists of a lanthanum(III) bromide scintillator, a photomultiplier tube, and custom electronics for stable high voltage supply and signal amplification. A new real-time data acquisition and control system samples the signals from the detectors with analog-to-digital converters, analyses events of interest, and communicates with the beam delivery systems. The timing of the detected events was synchronized to the cyclotron radiofrequency and the pencil-beam delivery. Range verification is performed by matching measured energy- and timeresolved gamma-ray spectra to nuclear reaction models based on the clinical treatment plan. Experiments in phantoms were performed using clinical beams in order to assess the performance of the systems. Results: The experiments showed reliable real-time analysis of more than 10 million detector events per second. The individual detector modules acquired accurate energy- and time-resolved gamma-ray measurements at a rate of 1 million events per second, which is typical for beams delivered with a clinical dose rate. The data acquisition system successfully tracked the delivery of the scanned pencil-beams to determine the location of range deviations within the treatment field. Conclusion: A clinical system for proton range verification using prompt gamma-ray spectroscopy has been designed and is being prepared for use during patient treatments. We anticipate to start a first clinical study in the near future. This work was supported by the Federal Share of program income earned by Massachusetts; General Hospital on C06-CA059267, Proton Therapy Research and Treatment Center.

60 APPLIED LIFE SCIENCES↗

Pore-fluid effects on seismic waves in vertically fractured earth with orthotropic symmetry

For elastically noninteracting vertical-fracture sets at arbitrary orientation angles to each other, a detailed model is presented in which the resulting anisotropic fractured medium generally has orthorhombic symmetry overall. Some of the analysis methods and ideas of Schoenberg are emphasized, together with their connections to other similarly motivated and conceptually related methods by Sayers and Kachanov, among others. Examples show how parallel vertical-fracture sets having HTI (horizontal transversely isotropic) symmetry transform into orthotropic fractured media if some subsets of the vertical fractures are misaligned with the others, and then the fractured system can have VTI (vertical transversely isotropic) symmetry if all of the fractures are aligned randomly or half parallel and half perpendicular to a given vertical plane. An orthotropic example having vertical fractures in an otherwise VTI earth system (studied previously by Schoenberg and Helbig) is compared with the other examples treated and it is finally shown how fluids in the fractures affect the orthotropic poroelastic system response to seismic waves. The key result is that fracture-influence parameters are multiplied by a factor of (1-B), where 0 {le} B < 1 is Skempton's second coefficient for poroelastic media. Skempton's B coefficient is itself a measurable characteristic of fluid-saturated porous rocks, depending on porosity, solid moduli, and the pore-fluid bulk modulus. For heterogeneous porous media, connections between the present work and earlier related results of Brown and Korringa are also established.

54 ENVIRONMENTAL SCIENCES↗

Onsager Transport Coefficients and Transference Numbers in Polyelectrolyte Solutions and Polymerized Ionic Liquids

Electrolytes featuring negatively charged polymers, such as nonaqueous polyelectrolyte solutions and polymerized ionic liquids, are currently under investigation as potential high cation transference number (t+) electrolytes for lithium-ion batteries. Herein, we use coarse-grained molecular dynamics simulations to characterize the Onsager transport coefficients of polyelectrolyte solutions as a function of chain length and concentration. For all the systems studied, we find that the rigorously computed transference number is substantially lower than that approximated by the ideal solution (Nernst-Einstein) equations typically used to characterize these systems due to the presence of strong anion-anion and cation-anion correlations. None of the polyelectrolyte solutions achieve t+ greater than that of the conventional binary salt electrolyte, with some solutions having negative t+. Overall, this work demonstrates that the Nernst-Einstein assumption does not provide a physically meaningful estimate of the transference number in these solutions and calls into question the expectation of polyelectrolytes to exhibit a high cation transference number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective hydrogen generation and resource circulation based on sulfur cycle system

For the effective hydrogen generation from H{sub 2}S, it should be compatible that the increscent of the photocatalytic (or electrochemical) activities and the development of effective utilization method of by-products (poly sulfide ion). In this study, “system integration” to construct the sulfur cycle system, which is compatible with the increscent of the hydrogen and or electron energy generation ratio and resource circulation, is investigated. Photocatalytic hydrogen generation rate can be enhanced by using stratified photocatalysts. Photo excited electron can be transpired to electrode to convert the electron energy to hydrogen energy. Poly sulfide ion as the by-products can be transferred into elemental sulfur and/or industrial materials such as rubber. Moreover, elemental sulfur can be transferred into H{sub 2}S which is the original materials for hydrogen generation. By using this “system integration”, the sulfur cycle system for the new energy generation can be constructed.

36 MATERIALS SCIENCE↗

Economic Dispatch Model of Nuclear High-Temperature Reactor with Hydrogen Cogeneration in Electricity Market

Hydrogen produced without carbon emissions could be a useful fuel as nations look to decarbonize their electricity, transport, and industry sectors. Using the iodine–sulfur (IS) cycle coupled with a nuclear heat source is one method for producing hydrogen without the use of fossil fuels. An economic dispatch model was developed for a nuclear-driven IS system to determine hydrogen sale prices that would make such a system profitable. The system studied is the HTTR-GT/H2, a design for power and hydrogen cogeneration at the Japan Atomic Energy Agency’s High Temperature Engineering Test Reactor. This study focuses on the development of the economic model and the role that input data plays in the final calculated values. Using a historical price duration curve shows that the levelized cost of hydrogen (LCOH) or breakeven sale price of hydrogen would need to be 98.1 JPY/m3 or greater. Synthetic time histories were also used and found the LCOH to be 67.5 JPY/m3. The price duration input was found to have a significant effect on the LCOH. As such, great care should be used in these economic dispatch analyses to select reasonable input assumptions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nuclear level-density parameters of nuclei in the Z{approx}70 and A{approx}180 mid-shell regions

{alpha}-particle evaporation energy spectra have been measured as a function of {gamma}-ray fold for various target-projectile systems leading to residual nuclei in the range of Z{approx}70 and A{approx}180 with excitation energy of 30-40 MeV. The inverse level-density parameter K was determined for various nuclei by comparing the high-energy part of the {alpha}-particle evaporation spectra with PACE2 predictions. It is observed that the inverse level-density parameter remains constant for all systems studied in this work within statistical errors in the angular momentum range of 15-30 ({Dirac_h}/2{pi}). The fold-gated {alpha}-particle energy spectra in these systems are well reproduced by the PACE2 code with a level-density parameter value of A/(8.2{+-}1.1) MeV{sup -1}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Vibrational Spectroscopic Studies on Some Double Alkali Tungstates Belonging to Orthorhombic Class at Room Temperature

Room temperature IR and Raman spectra of rubidium lithium tungstate and sodium lithium tungstates belonging to double alkali tungstate family are investigated using group theoretical methods. Observed internal and lattice modes in both systems studied are assigned. Analysis of spectral behavior reveals that the effect of site potential around tungstates ion is weak and the factor group splitting is operative. Differences in the lattice mode mixing and splitting of internal modes is influenced by the statistical ordering between two alkali ions having large and small ionic radii and is explained using size and charge effect observed earlier in scheelite type of structure. Thus, vibrational spectroscopic analysis may be a tool to understand the alkali ion ordering in double alkali systems.

36 MATERIALS SCIENCE↗

PV Inverter Testing for Momentary Cessation and Rate-of-Change-of-Frequency Events

To understand the power system stability and develop better electromagnetic transient (EMT) models of field deployed photovoltaic (PV) inverters, it is important to characterize inverters' response to abnormal voltage and frequency scenarios. Because EMT models are not typically available for small distribution-connected PV inverters, and because inerterconnection standards historically did not specify desired ride-through behaviors, we tested two such inverters in the lab to characterize their responses to severe undervoltage events and high rate-of-change-of-frequency (ROCOF) conditions. The inverters tested were pre-IEEE 1547-2018 residential PV inverters widely used in the Hawaiian Electric territory and many other areas. The testing results for undervoltage scenarios showed that the inverter from one vendor exhibited momentary cessation while the inverter from the other vendor did not exhibit momentary cessation behavior or tripping for most of the events below the 120 ms undervoltage trip threshold duration set by IEEE 1547-2003. The testing results for ROCOF scenarios showed that the inverter from one vendor temporarily lost synchronization during ROCOF conditions while the inverter from the other vendor did not lose synchronization or cease generation for any ROCOF conditions. Both the inverters were also tested for EMT-simulated grid events with severe changes in frequency and voltage. The observed responses of the inverters were different from the simulated response of PV inverters represented the best available assumptions from pre-existing information. The results from these experiments can be used to update the inverter models used in bulk power system studies.

aggregates↗

Molecular Dialogues between Early Divergent Fungi and Bacteria in an Antagonism versus a Mutualism

Animals and plants interact with microbes by engaging specific surveillance systems, regulatory networks, and response modules that allow for accommodation of mutualists and defense against antagonists. Antimicrobial defense responses are mediated in both animals and plants by innate immunity systems that owe their functional similarities to convergent evolution. Like animals and plants, fungi interact with bacteria. However, the principles governing these relations are only now being discovered. In a study system of host and nonhost fungi interacting with a bacterium isolated from the host, we found that bacteria used a common gene repertoire to engage both partners. In contrast, fungal responses to bacteria differed dramatically between the host and nonhost. These findings suggest that as in animals and plants, the genetic makeup of the fungus determines whether bacterial partners are perceived as mutualists or antagonists and what specific regulatory networks and response modules are initiated during each encounter.

59 BASIC BIOLOGICAL SCIENCES↗

Discretization Writeup for Grey Flux-Limited Radiation Diffusion

This report documents the time and space discretizations for grey flux-limited diffusion applied to the thermal radiative transfer (TRT) equations. We begin with a description of the physics being solved before moving into the diffusion approximation. Once we have the TRT system, we show a finite-volume-inspired discretization from Jim Morel (Texas A&M University, NUEN 627 class notes, lecture 8). As systems become hotter they emit more photons in the form of blackbody radiation. Because average photon energy of the blackbody source is proportional to the temperature of the system, we call these thermal photons or thermal radiation. As material temperatures increase, increasing fractions of the total energy in the system go into the radiation field. In addition, radiation can deposit energy and momentum non-locally, making it an important phenomenon for heating and impulse. In order to accurately study systems at high temperatures, we wish to add the physics of thermal radiation to our hydrodynamic system. In practice, coupling radiation and hydrodynamics is often done by operator-splitting each timestep into two consecutive, non-overlapping phases: (1) update the hydrodynamics for a fixed radiation state (2) update the radiation and internal energy for an otherwise fixed hydrodynamic state. Because of this clean separation of physics updates, in this report we show only the latter phase, which involves solely the TRT equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Micro-Raman technology to interrogate two-phase extraction on a microfluidic device

Microfluidic devices provide ideal environments to study solvent extraction. When droplets form and generate plug flow down the microfluidic channel, the device acts as a microreactor in which the kinetics of chemical reactions and interfacial transfer can be examined. Among the many benefits of microreactors is the ability to maintain small sample volumes, which is especially important when studying solvent extraction in harsh environments, such as in separations related to the nuclear fuel cycle. In solvent extraction, the efficiency of the process depends on complex formation and rates of transfer in biphasic systems. Thus, it is important to understand the kinetic parameters in an extraction system to maintain a high efficiency and effectivity of the process. Here we present a methodology that combines chemometric analysis with on-line micro-Raman spectroscopy to monitor biphasic extractions within a microfluidic device. This monitoring provided concentration measurements in both organic and aquoeus plugs as they flowed through the microfluidic channel. The biphasic system studied was comprised of HNO3 as the aqueous phase and 30 % (v/v) tributyl phosphate in n-dodecane comprised the organic phase, which simulated the Plutonium Uranium Redox EXtraction (PUREX) process. Using pre-equilibrated solutions (post extraction) the validity of the technique and methodology is illustrated. Following this validation, solutions that were not equilibrated were examined and the kinetics of interfacial mass transfer within the biphasic system were established. Results were compared to kinetics already determined on a macro scale to prove the efficacy of the technique

extraction, interfacial transport, liquid:liquid e↗

Four new deeply eclipsing white dwarfs in Zwicky Transient Facility

ABSTRACT We present the results of a search for deeply eclipsing white dwarfs in the Zwicky Transient Facility (ZTF) Data Release 4 (DR4). We identify nine deeply eclipsing white dwarf candidates, four of which we followed up with high-cadence photometry and spectroscopy. Three of these systems show total eclipses in the ZTF data and our follow-up Apache Point Observatory 3.5 m telescope observations. Even though the eclipse duration is consistent with sub-stellar companions, our analysis shows that all four systems contain a white dwarf with low-mass stellar companions of ∼0.1 M⊙. We provide mass and radius constraints for both stars in each system based on our photometric and spectroscopic fitting. Finally, we present a list of 41 additional eclipsing WD+M candidates identified in a preliminary search of ZTF DR7, including 12 previously studied systems. We identify two new candidate short-period, eclipsing, white dwarf–brown dwarf binaries within our sample of 41 WD+M candidates based on Pan-STARRS colours.

Kosakowski, A. (ORCID:0000000298781647)↗

Structural parameters of the nearest environment of ions in aqueous solutions of ytterbium chloride

The radial distribution functions (RDFs) of aqueous solutions of ytterbium chloride were calculated using previously collected X-ray diffraction data for a wide range of solution concentrations under ambient conditions. Different solution structure models were constructed. Theoretical RDFs were calculated for each model. The optimum models for all systems studied were chosen based on the best fit between the theoretical and experimental RDFs. Quantitative characteristics of the nearest environment of Yb{sup 3+} and Cl{sup –} ions in solutions, namely, the coordination number, interparticle distances, and types of ion pairs were determined. The average number of water molecules in the first coordination sphere of the cation decreases from 8.2 to 6.0 as the solution concentration increases. The structure of all systems investigated is governed by non-contact ion associates throughout the concentration range studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Coculture Substrate Depletion (PCSD) v1

(based on Erbilgin et al., BMC Bioinformatics, 2017, 18:57). Mixed cultures of microbial species are increasingly used to carry out a specific task in lieu of engineering a single microbe to do the same task. However, knowing how different species' metabolisms will integrate to reach a desired outcome is a difficult problem that has been studied in great detail--but only using steady-state models. Mixed cultures used for biotechnology processes, as well as microbial communities that exist in nature and crop agriculture, are metabolically dynamic systems. Studying the temporal substrate utilization by individuals is individuals in mixed cultures is an important first step in developing approaches to better model these biochemical processes and microbial communities found in nature. The 2017-004 software is comprised of four custom iPython notebooks that were used for all computational tasks in the experimental work described in "Dynamic substrate preferences predict metabolic properties of a simple microbial consortium" (Erbilgin et al., BMC Bioinformatics, 2017). The results indicate that a significant portion of a model community's overall metabolism can be predicted based on the metabolism of the individuals. The results further suggest that, when the mixed culture's substrate depletion significantly deviates from such a prediction, this may highlight potential metabolic pathways affected by species-species microbial interactions, leading to hypotheses about how a particular microbial community's structure and function may be modulated to perform a particular biotechnological goal.

Bowen, Benjamin↗

Low-velocity impact resistance and failure characteristics of all thermoplastic woven polymer-fiber-reinforced plastic composites

This study addresses the impact performances of recyclable composites made of all thermoplastic polymer-fiber-reinforced plastics (PFRPs), where the reinforcing fibers and matrix are made of thermoplastic polymers. Three woven PFRPs systems were evaluated, including polypropylene fibers, polypropylene matrix, and high-density polyethylene matrix. In low-velocity impact scenario with an impactor speed of less than 6 m/s, our results demonstrate the energy absorption capabilities of the flat laminate PFRPs compared to woven carbon fiber-reinforced plastics (CFRPs) and aluminum alloy 5052. For the systems studied, the PFRPs can reach the specific energy absorption 89% to 115% of the CFRPs. Even compared with the aluminum alloy 5052, the PFRPs can reach up to 97%. We investigate the failure morphologies of the PFRPs using X-ray µCT scans. They reveal the PFRPs’ unique ductile failure morphologies compared to common CFRPs. In addition, we heal the perforated region in the PFRPs by applying the manufacturing process identical to the initial curing process. The healed panels are perforated again, and they recovered 30% to 38% of their original specific energy absorption, a recovery not achievable with CFRPs. This study provides valuable experimental results, and concrete insights into the potential applications of recyclable PFRPs in various engineering fields. It emphasizes their excellent energy-absorbing capability and repairability.

CFRPs↗

Reversible Hydrogen Storage Materials – Structure, Chemistry, and Electronic Structure

To understand the processes involved in the uptake and release of hydrogen from candidate light-weight metal hydride storage systems, a combination of materials characterization techniques and first principle calculation methods have been employed. In addition to conventional microstructural characterization in the transmission electron microscope, which provides projected information about the through thickness microstructure, electron tomography methods were employed to determine the three-dimensional spatial distribution of catalyst species for select systems both before and after dehydrogenation. Catalyst species identification as well as compositional analysis of the storage material before and after hydrogen charging and discharging was performed using a combination of energy dispersive spectroscopy, EDS, and electron energy loss spectroscopy, EELS. The characterization effort was coupled with first-principles, electronic-structure and thermodynamic techniques to predict and assess meta-stable and stable phases, reaction pathways, and thermodynamic and kinetic barriers. Systems studied included: NaAlH 4 , CaH 2 /CaB 6 and Ca(BH 4 ) 2 , MgH 2 /MgB 2 , Ni-Catalyzed Magnesium Hydride, TiH 2 -Catalyzed Magnesium Hydride, LiBH 4 , Aluminum-based systems and Aluminum.

08 HYDROGEN↗

Time- and space-resolved light emission and spectroscopic research of the flashover plasma

The results of an experimental study of the evolution of surface flashover across the surface of an insulator in vacuum subject to a high-voltage pulse and the parameters of the flashover plasma are reported. For the system studied, flashover is always initiated at the cathode triple junctions. Using time-resolved framing photography of the plasma light emission the velocity of the light emission propagation along the surface of the insulator was found to be ∼2.5·10{sup 8} cm/s. Spectroscopic measurements show that the flashover is characterized by a plasma density of 2–4 × 10{sup 14} cm{sup −3} and neutral and electron temperatures of 2–4 eV and 1–3 eV, respectively, corresponding to a plasma conductivity of ∼0.2 Ω{sup −1} cm{sup −1} and a discharge current density of up to ∼10 kA/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗