Search NASA⌕ Search

SEARCH · Search NASA

Results for “THIOLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Tunneling across SAMs Containing Oligophenyl Groups

This paper reports rates of charge tunneling across self-assembled monolayers (SAMs) of compounds containing oligophenyl groups, supported on gold and silver, using Ga 2 O 3 /EGaIn as the top electrode. It compares the attenuation constant, $β$, and the pre-exponential parameter, $J_0$, of the simplified Simmons equation across oligophenyl groups (R = Ph n ; n = 1, 2, 3) with three different anchoring groups (thiol, HSR; methanethiol, HSCH 2 R; and acetylene, HC≡CR) that attach R to the template-stripped gold or silver substrate. The results demonstrate that the structure of the molecular linker between the anchoring group (-S- or -C≡C-) and the oligophenyl moiety significantly influences the rate of charge transport. SAMs of SPh n and C≡CPh n on gold show similar values of $β$ and log $|J_0|$ ($β$ = 0.28 ± 0.03 Å$^{–1}$ and log $|J_0|$ = 2.7 ± 0.1 for Au/SPhn; $β$ = 0.30 ± 0.02 $Å^{–1}$ and log $|J_0|$ = 3.0 ± 0.1 for Au/C≡CPh n ). The introduction of a single intervening methylene (CH 2 ) group between the anchoring sulfur atom and the aromatic units generates SAMs of SCH2Phn and increases $β$ to ca. 0.66 ± 0.06 $Å^{–1}$ on both gold and silver substrates. (For n-alkanethiolates on gold, the corresponding values are $β$ = 0.76 ± 0.03 $Å^{–1}$ and log $|J)0|$ = 4.2 ± 0.2). Density functional theory calculations indicate that the highest occupied molecular orbitals (HOMOs) of both SPh n and C≡CPh n extend beyond the anchoring group and onto the phenyl rings; SAMs composed of these two groups of molecules result in indistinguishable rates of charge transport. The introduction of the CH 2 group, to generate SCH 2 Ph n , disrupts the delocalization of the orbitals, localizes the HOMO on the anchoring sulfur atom, and results in the experimentally observed increase in $β$ to a value closer to that of a SAM of n-alkylthiolate molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Langmuir Films of n -Alkanethiol-Capped Gold Nanoparticles and n -Alkanes: Interfacial Mixing Scenarios Assessed by X-ray Reflectivity and Grazing Incidence Diffraction

A series of n-alkanes cospread with alkanethiol-stabilized gold nanoparticles (AuNP) were studied as Langmuir monolayers by synchrotron X-ray reflectivity and diffraction. Tetradecanethiol capped gold nanoparticles with core diameters close to 2 nm were used to make films at 20 °C, below the ligand order–disorder temperature. A variety of n-alkane chain lengths (Cn = C n H 2n+2 , where n = 12, 15 and 16) were tested to assess the interfacial assembly of nanoparticle films as a result of different mixing scenarios indicated in their surface pressure versus area isotherms. Synchrotron grazing incidence X-ray diffraction (GIXD) and reflectivity (XR) confirm that mixtures of n-alkane and AuNP exhibiting improved fluidity in their compression isotherm are indeed incorporating n-alkane into the AuNP ligand shell and stabilizing it at the air–water interface. The resulting films show a doubling of their correlation lengths and thus a significant improvement on their ordering, as well as increased lattice spacing that is dependent upon the n-alkane chain length. Mixtures that do not exhibit changes in their surface pressure vs area isotherm similarly show little change in the interfacial assembly of the nanoparticle films except to promote monolayer collapse and multilayer formation. Improvements to the film order are assigned to the initial formation of larger nanoparticle domains. Here, the nature of the chain length dependence and persistence of the n-alkane through compression suggest a favorable interaction with the nanoparticle ligand shell that results in the extension of methylene units of the longer alkanes beyond the thiol layer, which has implications for influencing nanoparticle interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembled Metal Molecular Networks by Nanoconfinement

Quasi-two-dimensional (2D) metal molecular networks (MMNs) often exhibit a nanoconfinement effect and high degree of anisotropy, which are highly diverse in their mechanical, electronic, and magnetic functionalities. Here we report an interfacial self-assembly of mechanically robust 2D MMNs, in which 3d transition metals are interconnected via molecular thiol bridges. The Langmuir–Schäfer assembled freestanding 2D nanosheets exhibit highly desired anisotropic charge transport and spin susceptibility, in which light and magnetic field induced charge transfer regulates the electronic interactions. Meanwhile, the mechanistic studies involving electronic structure reveal the molecular metal packing structure-controlled nanoconfinement and charge transfer. Furthermore, this study opens the door to 2D ultrathin metal coordination nanostructures for emerging functional materials and devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible Self-Assembly of Glutathione-Coated Gold Nanoparticle Clusters via pH-Tunable Interactions

In this study, nanoparticle (NP) clusters with diameters ranging from 20 to 100 nm are reversibly assembled from 5 nm gold (Au) primary particles coated with glutathione (GSH) in aqueous solution as a function of pH in the range of 5.4 to 3.8. As the pH is lowered, the GSH surface ligands become partially zwitterionic and form interparticle hydrogen bonds that drive the self-limited assembly of metastable clusters in <1 min. Whereas clusters up to 20 nm in size are stable against cluster–cluster aggregation for up to 1 day, clusters up to 80 nm in size can be stabilized over this period via the addition of citrate to the solution in equal molarity with GSH molecules. The cluster diameter may be cycled reversibly by tuning pH to manipulate the colloidal interactions; however, modest background cluster–cluster aggregation occurs during cycling. Cluster sizes can be stabilized for at least 1 month via the addition of PEG-thiol as a grafted steric stabilizer, where PEG-grafted clusters dissociate back to starting primary NPs at pH 7 in fewer than 3 days. Whereas the presence of excess citrate has little effect on the initial size of the metastable clusters, it is necessary for both the cycling and dissociation to mediate the GSH–GSH hydrogen bonds. In conclusion, these metastable clusters exhibit significant characteristics of equilibrium self-limited assembly between primary particles and clusters on time scales where cluster–cluster aggregation is not present.

36 MATERIALS SCIENCE↗

Two-Dimensional Crystallization of Poly( N -isopropylacrylamide)-Capped Gold Nanoparticles

Surface-sensitive X-ray reflectivity and grazing incidence small-angle X-ray scattering reveal the structure of polymer-capped-gold nanoparticles (AuNPs that are grafted with poly(N-isopropylacrylamide); PNIPAM–AuNPs) as they self-assemble and crystallize at the aqueous suspension/vapor interface. Citrate-stabilized AuNPs (5 and 10 nm in nominal diameter) are ligand-exchanged by 6 kDa PNIPAM-thiol to form corona brushes around the AuNPs that are highly stable and dispersed in aqueous suspensions. Surprisingly, no clear evidence of thermosensitive effect on surface enrichment or self-assembly of the PNIPAM–AuNPs is observed in the 10–35 °C temperature range. However, addition of simple salts (in this case, NaCl) to the suspension induces migration of the PNIPAM–AuNPs to the aqueous surface, and above a threshold salt concentration, two-dimensional crystals are formed. In conclusion, the 10 nm PNIPAM–AuNPs form a highly ordered single layer with in-plane triangular structure, whereas the 5 nm capped NPs form short-range triangular structure that gradually becomes denser as salt concentration increases.

36 MATERIALS SCIENCE↗

Enrichment and Distribution of Pb 2+ Ions in Zwitterionic Poly(cysteine methacrylate) Brushes at the Solid–Liquid Interface

Cysteine-based polyzwitterionic brushes have been prepared via a two-step route. First, poly(allyl methacrylate) (PAMA) brushes have been grown from the surface of silicon substrates using surface-initiated atom transfer radical polymerization. The obtained PAMA brushes with free pendant vinyl groups were further modified via radical thiol-ene addition reaction to attach L-cysteine moieties. Surface zeta potential investigations on pH-responsiveness of these poly(cysteine methacrylate) (PCysMA) brushes confirm their zwitterionic character at intermediate pH range, while at pH values either below pH 3.50 or above pH 8.59, they exhibit polyelectrolyte character. Under acid (pH < 3.50) or base (pH > 8.59) conditions, they possess either cationic or anionic character, respectively. In the zwitterionic region, these PCysMA brushes show positive surface $\zeta$ potential in the presence of Pb(CH 3 COO) 2 solutions of various concentrations. The results are in line with microscopic investigations using anomalous X-ray reflectivity (AXRR) carried out along the absorption edge of Pb 2+ ions. When the photon energies were varied around the absorption L3 edge of lead (13037 eV), the Pb 2+ concentration normal to the silicon substrates, as a function of depth inside PCysMA brushes, could be revealed at the nanoscale. Both zeta potential and AXRR measurements confirm the enrichment of Pb 2+ ions inside PCysMA brushes, indicating the potential of PCysMA to be used as a water purification material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exchangeable Liquid Crystalline Elastomers: Enabling Rapid Processing and Enhanced Actuation Stability through On-Demand Deactivation

Exchangeable liquid crystalline elastomers (xLCEs) bearing dynamic covalent bonds are promising candidates for soft actuators due to their unique capability to adjust both network structure and liquid crystalline (LC) alignment after polymerization. While current xLCEs with low exchange temperatures are convenient for processing, they suffer from issues such as creep and loss of LC alignment during repeated thermal actuation. Herein, we present an effective solution using dynamic anhydride chemistry within a thiol-ene-based xLCE. This approach enables a catalyst-free, low-temperature bond exchange of the xLCE after polymerization, allowing for the adjustment of LC orientation under mild conditions. More importantly, it enables on-demand deactivation of the bond exchange via anhydride hydrolysis, effectively eliminating creep and enhancing actuation stability for over 100 cycles. Furthermore, the hydrolysis process results in the formation of carboxylic acid groups, which can be converted into carboxylates via alkali treatment, thereby providing the xLCE with humidity responsiveness. Finally, these findings highlight the use of dynamic anhydride bonds in the fabrication and optimization of xLCEs with enhanced durability and functionality, which is expected to facilitate significant advancements in their applications in soft actuators and robotics.

36 MATERIALS SCIENCE↗

Incorporation of Thioacetate Pendants on a Polyalkenamer Enables High Extensibility

This study focuses on functionalizing polycyclooctene (PCOE) with thioacetate groups using thiol–ene click chemistry. The ethylene thioacetate (EVSA) copolymers produced vary in thioacetate incorporation (4–25 mol %) via a controlled semibatch addition technique with AIBN dosing. Copolymers with 4–14 mol % thioacetate are semicrystalline, while those with 20–25 mol % are amorphous. Increased functionalization correlates with decreased crystallinity and increased stretchability, with the highest functionalization (25 mol %) showing a modulus of 0.045 MPa and 2000% elongation at break. Here, this behavior is due to the pseudoprecise functionalization of the thioacetate pendants and intrinsic cross-linking that occurs during melt processing. Broadband dielectric spectroscopy (BDS) indicates a low activation energy barrier (16 kJ/mol for the β process), suggesting potential self-healing applications.

36 MATERIALS SCIENCE↗

Photo-Cross-Linked Anion Exchange Membranes with Improved Water Management and Conductivity

Robust, cross-linked anion exchange membranes (AEMs) were prepared from solvent-processable polyisoprene- ran -poly(vinylbenzyltrimethylammonium chloride) (PI- ran -P- [VBTMA][Cl]) ionomers via photoinitiated thiol - ene chem- istry. Two series of membranes were prepared choosing two dithiol cross-linkers, 1,10-decanedithiol and 2,2 ' - (ethylenedioxy)diethanethiol, selected for their di ff erent hydro- phobicities. A strong correlation was found between the choice of dithiol cross-linker, water uptake, morphology, and the ion conductivity of the membranes. Results were compared with previous fi ndings of thermally cross-linked AEMs from analogous random copolymers. Comparably high chloride ion conductivities were obtained at low to moderate ion exchange capacities (IECs) with signi fi cantly low water uptake values. It was shown that by choosing a hydrophilic cross-linker ion cluster formation may be suppressed and ion conduction improved. This study highlights that it is possible to promote ion conductivities for low IEC membranes (<1 mmol/g) by forming well- connected, ion conducting network morphology. This observation paves the way for mechanically robust ion conducting membranes with enhanced conductivities and better water management.

Ertem, S. Piril↗

Advancing reversible shape memory by tuning the polymer network architecture

Because of counteraction of a chemical network and a crystalline scaffold, semicrystalline polymer networks exhibit a peculiar behavior—reversible shape memory (RSM), which occurs naturally without applying any external force and particular structural design. There are three RSM properties: (i) range of reversible strain, (ii) rate of strain recovery, and (iii) decay of reversibility with time, which can be improved by tuning the architecture of the polymer network. Different types of poly(octylene adipate) networks were synthesized, allowing for control of cross-link density and network topology, including randomly cross-linked network by free-radical polymerization, thiol–ene clicked network with enhanced mesh uniformity, and loose network with deliberately incorporated dangling chains. It is shown that the RSM properties are controlled by average cross-link density and crystal size, whereas topology of a network greatly affects its extensibility. In conclusion, we have achieved 80% maximum reversible range, 15% minimal decrease in reversibility, and fast strain recovery rate up to 0.05 K –1 , i.e., ca. 5% per 10 s at a cooling rate of 5 K/min.

36 MATERIALS SCIENCE↗

Chain Conformation near the Buried Interface in Nanoparticle-Stabilized Polymer Thin Films

It is known that when nanoparticles are added to polymer thin films, they often migrate to the film-substrate interface and form an “immobile interfacial layer”, which has been believed as the origin of suppression of dewetting. We here report an alternative mechanism of dewetting suppression from the structural aspect of a polymer. Dodecane thiol-functionalized gold (Au) nanoparticles embedded in PS thin films prepared on Si substrates were used as a model. It was found that thermal annealing promotes irreversible polymer adsorption onto the substrate surface along with the surface migration of the nanoparticles. We also revealed that the surface migration causes additional nanoconfined space for the adsorbed polymer chains. As a result, the self-organization process of the strongly adsorbed polymer chains on the solid surface was so hindered that the chain conformations were randomized and expanded in the film normal direction. Here, the resultant chain conformation allows the interpenetration between free chains and the adsorbed chains, promoting adhesion and hence stabilizing the thin film.

36 MATERIALS SCIENCE↗

Effect of Poly(ethylene glycol) Grafting Density on Methylcellulose Fibril Formation

Herein we investigate the effect of short-chain poly(ethylene glycol) (PEG) graft density on the formation of methylcellulose (MC) fibrils at elevated temperatures. Thiol–ene click chemistry was used to systematically graft 800 and 2000 g/mol PEG onto the backbone of allylated MC, with a wide range of grafting densities from 0.7% to 33%. As determined from light scattering, grafting leads to an increase in the persistence length of this semiflexible copolymer, by as much as a factor of 10. Upon heating, SAXS and AFM studies show that fibril formation is suppressed at around 10% grafting density for shorter PEG grafts, corresponding to persistence lengths about ~22 nm. For longer grafts fibril formation is suppressed at 7% grafting density, at around the same ~22 nm persistence length. The radius of the fibrils increases with the square root of the persistence length of the chains, which is consistent with a theory for the radius of twisted chains. The ability to form networks at 80 °C is highly correlated to the ability to form fibrils, and accordingly the modulus systematically decreases with grafting density. When the fibril formation is suppressed, MC solutions no longer form solid networks. Therefore, grafting modulates the molecular architecture and gelation properties of MC and also provides new insight into the structure of MC fibrils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating 225 Ac and 177 Lu Radioimmunoconjugates against Antibody–Drug Conjugates for Small-Cell Lung Cancer

Interest in the use of 225 Ac for targeted alpha therapies has increased dramatically over the past few years, resulting in a multitude of new isotope production and translational research efforts. However, 225 Ac radioimmunoconjugate (RIC) research is still in its infancy, with most prior experience in hematologic malignancies and only one reported preclinical solid tumor study using 225 Ac RICs. In an effort to compare 225 Ac RICs to other current antibody conjugates, a variety of RICs are tested against intractable small-cell lung cancer (SCLC). Here we directly compare, in vitro and in vivo , two promising candidates of each α or β - category, 225 Ac and 177 Lu, versus pyrrolobenzodiazepine (PBD) nonradioactive benchmarks. The monoclonal antibody constructs are targeted to either delta like 3 protein (DLL3), a recently discovered SCLC target, or CD46 as a positive control. An immunocompromised maximum tolerated dose assay is performed on NOD SCID mice, along with tumor efficacy proof-of-concept studies in vivo . We overview the conjugation techniques required to create serum-stable RICs and characterize and compare in vitro cell killing with RICs conjugated to nonspecific antibodies (huIgG1) with either native or site-specific thiol loci against tumor antigen DLL3-expressing and nonexpressing cell lines. Using patient-derived xenografts of SCLC onto NOD SCID mice, solid tumor growth was controlled throughout 3 weeks before growth appeared, in comparison to PBD conjugate controls. NOD SCID mice showed lengthened survival using 225 Ac compared to 177 Lu RICs, and PBD dimers showed full tumor suppression with nine out of ten mice. The exploration of RICs on a variety of antibody-antigen systems is necessary to direct efforts in cancer research toward promising candidates. However, the anti-DLL3-RIC system with 225 Ac and 177 Lu appears to be not as effective as the anti-DLL3-PBD counterpart in SCLC therapy with matched antibodies and portrays the challenges in both SCLC therapy as well as the specialized utility of RICs in cancer treatment.

60 APPLIED LIFE SCIENCES↗

Nanoparticle-Mediated Assembly of Peptoid Nanosheets Functionalized with Solid-Binding Proteins: Designing Heterostructures for Hierarchy

The fabrication of ordered architectures that intimately integrate polymer, protein and inorganic components remains difficult. Two promising building blocks to tackle this challenge are peptoids, peptide mimics capable of self-assembly into well-defined structures, and solid-binding peptides, which offer a biological path to controlled inorganic assembly. Here, we report on the synthesis of 3.3 nm-thick, thiol-reactive peptoid nanosheets from equimolar mixtures of unmodified and maleimide-derivatized versions of the Nbpe 6 Nce 6 oligomer, optimize the location of engineered cysteine residues in silica-binding derivatives of superfolder green fluorescent protein for maleimide conjugation, and react the two components to form proteinpeptoid hybrids exhibiting partial or uniform protein coverage on both of their sides. Using 10 nm silica nanoparticles, we trigger the stacking of these 2D structures into a multi-layer material comprised of alternating peptoid, protein and organic layers. This simple and modular approach to hierarchical hybrid synthesis should prove useful in bioimaging and photocatalysis applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Versatile Liquid Crystal Elastomer Formulations Using Amine-Acrylate Chemistry and Processing for Advanced Manufacturing

This study aims to tune rheological properties of liquid crystal elastomers (LCEs) through a strategic approach, leveraging the differing reaction rates of thiols and primary and secondary amines with acrylate monomers or the inclusion of processing additives to enable amenability to advanced manufacturing. We found that varying the time of oligomerization at elevated temperatures of amine-functional monomers with acrylate-functional monomers enabled simple control of rheological properties. Additionally, we could also control rheological properties by introducing reinforcing fillers or organic solvents. By varying the oligomerization conditions, we achieved a broad range of viscosities, from 1.1 Pa s to 560 Pa s as measured at 60 °C. When the rheological properties were varied through the incorporation of various solid and liquid inclusions, viscosities could range from less than 1 Pa s to nearly 1000 Pa s when measured at 60 °C. The shape morphing capabilities that are intrinsic to LCEs and the mechanical properties were also characterized. Here, we find that the oligomerization conditions and the addition of fillers influence shape morphing and energy absorption, as characterized by the stress–strain characteristics, further suggesting their potential to be used in energy dissipation applications where performance can be turned. Last, we demonstrate how the range of accessible rheological properties grants formulations amenable to various advanced manufacturing techniques.

Liquid chromatography↗

Cooperativity in the Aldol Condensation Using Bifunctional Mesoporous Silica–Poly(styrene) MCM-41 Organic/Inorganic Hybrid Catalysts

This work explores the efficacy of silica/organic hybrid catalysts, where the organic component is built from linear aminopolymers appended to the silica support within the support mesopores. Specifically, the role of molecular weight and polymer chain composition in amine-bearing atom transfer radical polymerization-synthesized poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione) copolymers is probed in the aldol condensation of 4-nitrobenzaldehyde and acetone. Controlled polymerization produces protected amine-containing poly(styrene) chains of controlled molecular weight and dispersity, and a grafting-to thiol–ene coupling approach followed by a phthalimide deprotection step are used to covalently tether and activate the polymer hybrid catalysts prior to the catalytic reactions. Site-normalized batch kinetics are used to assess the role of polymer molecular weight and chain composition in the cooperative catalysis. Lower-molecular-weight copolymers are demonstrated to be more active than catalysts built from only molecular organic components or from higher-molecular-weight chains. Molecular dynamics simulations are used to probe the role of polymer flexibility and morphology, whereby it is determined that higher-molecular-weight hybrid structures result in congested pores that inhibit active site cooperativity and the diffusivity of reagents, thus resulting in lower rates during the reaction.

36 MATERIALS SCIENCE↗

Chemical Functional Groups Regulate Ion Concentrations and pHs in Nanopores

Understanding ion behaviors in functionalized nanopores is essential to deciphering reactions in both natural and engineered systems, such as sediments, biological ion channels, and membranes. While many efforts have shown the modified ion behaviors in the functionalized nanopores, a direct measurement and analysis to show how chemical functional groups affect ion concentrations in nanopores are critically needed. In this work, we present a plasmonic nanosensor that can measure the local concentrations of protons, anions (phosphate, nitrate, sulfate, and arsenate), and cations (mercury, lead, and copper) in functionalized nanopores, and we compare their concentrations in nanopores with the corresponding bulk concentrations. Notably, chemical functional groups induced ion concentrations differently in nanopores. In pristine nanopores and methyl- and phenyl-functionalized nanopores, we discovered an unexpected concurrence of an enhanced anion concentration and a suppressed cation concentration. In addition, the nanopore pH is dependent on bulk solution compositions and can be lower by 2.5 units, even when the bulk solution is well-buffered. In contrast, for hydrophilic (amine, thiol, and carboxyl) nanopores, pH depended on the p K a of the functional groups, and the heavy metal concentrations depended on chemical interactions with the functional groups. Our findings provide a better understanding of water chemistry in nanopores and can help precisely control ions in nanopores to benefit the design of membrane-based desalination techniques, CO 2 storage, and porous catalysts.

54 ENVIRONMENTAL SCIENCES↗

Tunable Photoluminescent Core/Shell Cu(+)-Doped ZnSe/ZnS Quantum Dots Codoped with Al(3+), Ga(3+), or In(3+).

Semiconductor quantum dots (QDs) with stable, oxidation resistant, and tunable photoluminescence (PL) are highly desired for various applications including solid-state lighting and biological labeling. However, many current systems for visible light emission involve the use of toxic Cd. Here, we report the synthesis and characterization of a series of codoped core/shell ZnSe/ZnS QDs with tunable PL maxima spanning 430-570 nm (average full width at half-maximum of 80 nm) and broad emission extending to 700 nm, through the use of Cu(+) as the primary dopant and trivalent cations (Al(3+), Ga(3+), and In(3+)) as codopants. Furthermore, we developed a unique thiol-based bidentate ligand that significantly improved PL intensity, long-term stability, and resilience to postsynthetic processing. Through comprehensive experimental and computational studies based on steady-state and time-resolved spectroscopy, electron microscopy, and density functional theory (DFT), we show that the tunable PL of this system is the result of energy level modification to donor and/or acceptor recombination pathways. By incorporating these findings with local structure information obtained from extended X-ray absorption fine structure (EXAFS) studies, we generate a complete energetic model accounting for the photophysical processes in these unique QDs. With the understanding of optical, structural, and electronic properties we gain in this study, this successful codoping strategy may be applied to other QD or related systems to tune the optical properties of semiconductors while maintaining low toxicity.

Cooper, Jason K↗