Results for “Temporal data” — Page 26

NASA NTRS2011

Canadian Experiment for Soil Moisture in 2010 (CanEX-SM10): Overview and Preliminary Results

The Canadian Experiment for Soil Moisture in 2010 (CanEx-SM10) was carried out in Saskatchewan, Canada from 31 May to 16 June, 2010. Its main objective was to contribute to Soil Moisture and Ocean salinity (SMOS) mission validation and the pre-launch assessment of Soil Moisture and Active and Passive (SMAP) mission. During CanEx-SM10, SMOS data as well as other passive and active microwave measurements were collected by both airborne and satellite platforms. Ground-based measurements of soil (moisture, temperature, roughness, bulk density) and vegetation characteristics (Leaf Area Index, biomass, vegetation height) were conducted close in time to the airborne and satellite acquisitions. Besides, two ground-based in situ networks provided continuous measurements of meteorological conditions and soil moisture and soil temperature profiles. Two sites, each covering 33 km x 71 km (about two SMOS pixels) were selected in agricultural and boreal forested areas in order to provide contrasting soil and vegetation conditions. This paper describes the measurement strategy, provides an overview of the data sets and presents preliminary results. Over the agricultural area, the airborne L-band brightness temperatures matched up well with the SMOS data. The Radio frequency interference (RFI) observed in both SMOS and the airborne L-band radiometer data exhibited spatial and temporal variability and polarization dependency. The temporal evolution of SMOS soil moisture product matched that observed with the ground data, but the absolute soil moisture estimates did not meet the accuracy requirements (0.04 m3/m3) of the SMOS mission. AMSR-E soil moisture estimates are more closely correlated with measured soil moisture.

Magagi, Ramata↗

NASA NTRS2017

Planetary Crater Detection and Registration Using Marked Point Processes, Multiple Birth and Death Algorithms, and Region-Based Analysis

Because of the large variety of sensors and spacecraft collecting data, planetary science needs to integrate various multi-sensor and multi-temporal images. These multiple data represent a precious asset, as they allow the study of targets spectral responses and of changes in the surface structure; because of their variety, they also require accurate and robust registration. A new crater detection algorithm, used to extract features that will be integrated in an image registration framework, is presented. A marked point process-based method has been developed to model the spatial distribution of elliptical objects (i.e. the craters) and a birth-death Markov chain Monte Carlo method, coupled with a region-based scheme aiming at computational efficiency, is used to find the optimal configuration fitting the image. The extracted features are exploited, together with a newly defined fitness function based on a modified Hausdorff distance, by an image registration algorithm whose architecture has been designed to minimize the computational time.

Image Processing; Pattern Recognition↗

NASA NTRS2018

Improving Soil Moisture Estimation through the Joint Assimilation of SMOS and GRACE Satellite Observations

Observations from recent soil moisture dedicated missions (e.g. SMOS or SMAP) have been used in innovative data assimilation studies to provide global high spatial (i.e., approximately10-40 km) and temporal resolution (i.e., daily) soil moisture profile estimates from microwave brightness temperature observations. These missions are only sensitive to near-surface soil moisture 0-5 cm). In contrast, the Gravity Recovery and Climate Experiment (GRACE) mission provides accurate measurements of the entire vertically integrated terrestrial water storage (TWS) column but, it is characterized by low spatial (i.e., 150,000 km2) and temporal (i.e., monthly) resolutions. Data assimilation studies have shown that GRACE-TWS primarily affects (in absolute terms) deeper moisture storages (i.e., groundwater). In this presentation I will review benefits and drawbacks associated to the assimilation of both types of observations. In particular, I will illustrate the benefits and drawbacks of their joint assimilation for the purpose of improving the entire profile of soil moisture (i.e., surface and deeper water storages).

Girotto, Manuela↗

NASA NTRS2018

Planetary Crater Detection and Registration Using Marked Point Processes, Multiple Birth and Death Algorithms, and Region-Based Analysis

Because of the large variety of sensors and spacecraft collecting data, planetary science needs to integrate various multi-sensor and multi-temporal images. These multiple data represent a precious asset, as they allow the study of targets spectral responses and of changes in the surface structure; because of their variety, they also require accurate and robust registration. A new crater detection algorithm, used to extract features that will be integrated in an image registration framework, is presented. A marked point process-based method has been developed to model the spatial distribution of elliptical objects (i.e. the craters) and a birth-death Markov chain Monte Carlo method, coupled with a region-based scheme aiming at computational efficiency, is used to find the optimal configuration fitting the image. The extracted features are exploited, together with a newly defined fitness function based on a modified Hausdorff distance, by an image registration algorithm whose architecture has been designed to minimize the computational time.

Image Processing:Pattern Recognition↗

NASA NTRS1994

Variation of Great Lakes Water Levels Derived from Geosat Altimetry

A technique for using satellite radar altimetry data to estimate the temporal variation of the water level in moderate to large lakes and enclosed seas is described. Great Lakes data from the first 2 years of the U.S. Navy's Geosat Exact Repeat Mission (November 1986 to November 1988), for which there is an improved orbit, are used to demonstrate the technique. The Geosat results are compared to the lake level data collected by the Great Lakes Section, National Ocean Service, National Oceanic and Atmospheric Administration, and are found to reproduce the temporal variations of the five major lakes with Root-Mean-Square error (RMS) ranging from 9.4 to 13.8 cm and a combined average of 11.1 cm. Geosat data are also analyzed for Lake St. Clair, representing a moderate-sized lake, with a resulting rms of 17.0 cm. During this study period, the water level in the Great Lakes varied in a typical annual cycle of about 0.2 m (0.5 in for Lake Ontario) superimposed on a general decline of approximately 0.5 m. The altimeter data reproduced the general decline reasonably well for all the lakes, but the annual cycle was obscured in some lakes due to systematic errors in the altimeter data. Current and future altimetry missions will have markedly improved accuracy which will permit many moderate (25 km diameter) or larger lakes or enclosed seas to be routinely monitored.

Morris, Charles S.↗

NASA NTRS1991

Mean flow and variability in the Kuroshio Extension from Geosat altimetry data

The mean flow and temporal and spatial variations of the Kuroshio Extension in the region of 140-180 deg E and 30-40 deg N are investigated using altimeter data from the Geosat Exact Repeat Mission (ERM). Mean surface height profiles are estimated along individual tracks by assuming the velocity profile of the Kuroshio Extension to be Gaussian-shaped and by successively fitting this synthetic current's height profile to the residual height data. The mean profiles from ascending and descending tracks are used to derive the mean surface height by an inverse method and to obtain the absolute surface height fields for the first 2.5 yr of the Geosat ERM. Both the mean and the instantaneous height fields thus derived compare well with the available hydrographic data and the SST patterns from the NOAA satellites. Effects of deep mean flow and baroclinic shear are found to be important in explaining the observed propagation speeds.

Qiu, BO↗

NASA NTRS1986

Statistical relation between monthly mean precipitable water and surface-level humidity over global oceans

Monthly summaries of atmospheric soundings taken over 17 years from 49 midocean stations at small islands and weather ships distributed over major oceans are examined. Over tropical oceans, precipitable water is found to be a better predictor of surface-level humidity than surface-level air temperature. A statistical relation in the form of a polynomial is derived; from this relation, the monthly-mean, surface-level mixing ratio can be computed from monthly-mean precipitable water. The root-mean-square differences between the measured and derived values were found to be less than 8 x 10 to the -4th over most ocean areas. Such a relation is useful in deriving large-scale evaporation and latent heat flux data from the ocean, using spaceborne observations. The temporal and spatial variabilities of data deviations from this relation are examined. This relation is found to be applicable to all major ocean basins and can be used to monitor interannual variability. Boundary-layer thermodynamics of different air masses are suggested as an explanation of some characteristics of this relation.

Liu, W. T.↗

NASA NTRS1993

Seismology and space-based geodesy

The potential of space-based geodetic measurement of crustal deformation in the context of seismology is explored. The achievements of seismological source theory and data analyses, mechanical modeling of fault zone behavior, and advances in space-based geodesy are reviewed, with emphasis on realizable contributions of space-based geodetic measurements specifically to seismology. The fundamental relationships between crustal deformation associated with an earthquake and the geodetically observable data are summarized. The response and spatial and temporal resolution of the geodetic data necessary to understand deformation at various phases of the earthquake cycle is stressed. The use of VLBI, SLR, and GPS measurements for studying global geodynamics properties that can be investigated to some extent with seismic data is discussed. The potential contributions of continuously operating strain monitoring networks and globally distributed geodetic observatories to existing worldwide modern digital seismographic networks are evaluated in reference to mutually addressable problems in seismology, geophysics, and tectonics.

Tralli, David M.↗

DOE OSTI2026

Disparities in the air quality monitoring stations and PM₂.₅ in Chicago’s air quality landscape

Fine particulate matter (PM₂.₅) poses significant public and environmental health risks in urban areas. Chicago’s dense industry and traffic create variable air quality, yet monitoring is unevenly distributed, resulting in undersampling of air quality data in some city areas. This study applied a hybrid approach using GIS-based kernel density mapping, interpolation modeling (IDW, Spline, Kriging) of USEPA monitoring data, multi-scale temporal trend analyses (hourly to annual), and ESDA. Accordingly, the density surface showed that monitors are concentrated in the affluent north, northwest, and southwest sides of Chicago (up to ~ 0.07 stations per sq mile), while the south and southeast regions, with predominantly minority communities, have virtually no coverage. Overall, citywide coverage is minimal (~ 4–5 monitors total; ~0.02 per sq mile; ≈1 per 600,000 residents). Temporal analyses showed that the city’s mean annual PM₂.₅ (~ 10.8 µg/m³) exceeds USEPA/WHO standards (9 µg/m³), with summer means (~ 17.1 µg/m³) significantly higher than other seasons. Diurnally, a clear pattern was observed, with PM₂.₅ concentrations peaking overnight (00:00–03:00) and during the morning rush hours, and dipping during midday to late afternoon. Spatial distribution of PM₂.₅ identified hotspots near O’Hare Airport, the downtown Loop area, and south-side neighborhoods, contrasting with lower concentrations on the north side, revealing Chicago’s socioeconomic divides and resulting environmental inequities. The findings underscore the need for expanded monitoring and targeted interventions in under-monitored, high-pollution communities to advance equitable community health.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1978

Impact of advanced onboard processing concepts on end-to-end data system

An investigation is conducted of the impact of advanced onboard data handling concepts on the total system in general and on ground processing operations, such as those being performed in the central data processing facility of the NASA Goddard Space Flight Center. In one of these concepts, known as the instrument telemetry packet (ITP) system, telemetry data from a single instrument is encoded into a packet, along with other ancillary data, and transmitted in this form to the ground. Another concept deals with onboard temporal registration of image data from such sensors as the thematic mapper, to be carried onboard the Landsat-D spacecraft in 1981. It is found that the implementation of the considered concepts will result in substantial simplification of the ground processing element of the system. With the projected tenfold increase in the data volume expected in the next decade, the introduction of ITP should keep the cost of the ground data processing function within reasonable bounds and significantly contribute to a more timely delivery of data/information to the end user.

Sos, J. Y.↗

NASA NTRS1982

A concept for a future ground control data set for image correction

Strips of ground control can be established with current and future satellite sensors. These can provide precise and reliable geometric references for locating and correcting satellite image data and to support temporal image registration. This paper briefly describes the concept and approach for implementing this data base called a Ground Control Strip, and recommends additional work. The advent of new solid state imaging systems, in particular the linear array detectors (pushbroom sensors), make this new concept particularly attractive and practical.

Bernstein, R.↗

NASA NTRS1985

Penetration of solar protons into the Earth's magnetosphere on November 22, 1977

The low polar-orbiting Cosmos-900 satellite carried a large geometric factor Cerenkov counter to study the particle anisotropy and spectrum near the proton increase peak in solar cosmic rays. The data help understand different temporal behavior of the increases detected at the stations because the whole set of data showed that the angular distribution of solar cosmic ray particles in interplanetary space was narrow throughout the observation time, resulting in a rapid variation of particle intensity near the poles. The power-law index of the solar cosmic ray integral spectrum varied from -2.4 to -5.2 in the 1 to 4 GV rigidity range from 10.31 to 11.25 UT on November 22, 1977. The flare-time data from all orbits indicate an increased radiation intensity on L=3.5 to 4.0.

Gorchakov, E. V.↗

NASA NTRS1991

Spatial and temporal variability of global surface solar irradiance

Consideration is given to a fast scheme for computing surface solar irradiance using data from the International Satellite Cloud Climatology Project (ISCCP). Daily mean solar irradiances from the fast scheme reproduce the detailed global results from full radiative transfer model calculations to within 6 and 10 W/sq m over the ocean and land, respectively. Comparison of calculated monthly mean results using 5 m of ISCCP data (July 1983-July 1984) with climatology from the 1970s at six temperature-latitude ocean weather stations shows agreement within published estimates of interannual variability of monthly means at the individual stations. A further test against a 17-day time series at a continental site, where ground and satellite data were spatially and temporally coincident, showed an accuracy of better than 9 W/sq m on a daily basis and less than 4 percent bias in the 17-day mean. Frequently used bulk formulas for solar irradiance are also evaluated in each of these tests.

Bishop, James K. B.↗

NASA NTRSDate not supplied

Supporting Global Air Quality Management Needs With A Flexible Data Fusion Tool for Estimation and Forecasting in Google Earth Engine

High spatial and temporal resolution air quality estimation and forecasting can be enhanced by combining global data sources, like chemical transport models and satellite remote sensing, with local information from regulatory and low-cost air quality monitors. Successful integration of data from these diverse sources is complicated by many factors, however, including differences in spatial and temporal resolution, data availability and latency issues, varying data quality, and large computational and data storage requirements. This presentation will provide an overview of a NASA-funded effort to develop the foundation for future operationalization of air quality forecasting for world-wide end-users and integration into their air quality management decision processes, which will be achieved in future phases of this multi-year project. We will summarize our progress in developing a data fusion system using the Google Earth Engine platform which can integrate model, satellite, and surface-level monitoring datasets to enhance estimation and forecasting of air-quality-relevant pollutants at sub-daily and sub-city scales. The tool is being developed in close cooperation with several city- and regional-level air quality managers in the USA and around the world. Our end-goal is to provide these air quality managers with the information they need to assess and anticipate the impacts of poor air quality, track changes in air quality due to ongoing mitigation efforts and land use changes, and identify ways to improve their air quality monitoring strategies. This presentation will focus on recent advances achieved through the project, including integration of multiple air quality datasets in a prototype data fusion system in Google Earth Engine, the quantification of uncertainties associated with our data fusion approach, and the development of user interfaces and visualization tools to convey air quality information in a way which best meets end-user needs.

Carl Malings↗

NASA NTRSDate not supplied

Supporting Global Air Quality Management Needs With A Flexible Data Fusion Tool for Estimation and Forecasting in Google Earth Engine

High spatial and temporal resolution air quality estimation and forecasting can be enhanced by combining global data sources, like chemical transport models and satellite remote sensing, with local information from regulatory and low-cost air quality monitors. Successful integration of data from these diverse sources is complicated by many factors, however, including differences in spatial and temporal resolution, data availability and latency issues, varying data quality, and large computational and data storage requirements. This presentation will provide an overview of a NASA-funded effort to develop the foundation for future operationalization of air quality forecasting for world-wide end-users and integration into their air quality management decision processes, which will be achieved in future phases of this multi-year project. We will summarize our progress in developing a data fusion system using the Google Earth Engine platform which can integrate model, satellite, and surface-level monitoring datasets to enhance estimation and forecasting of air-quality-relevant pollutants at sub-daily and sub-city scales. The tool is being developed in close cooperation with several city- and regional-level air quality managers in the USA and around the world. Our end-goal is to provide these air quality managers with the information they need to assess and anticipate the impacts of poor air quality, track changes in air quality due to ongoing mitigation efforts and land use changes, and identify ways to improve their air quality monitoring strategies. This presentation will focus on recent advances achieved through the project, including integration of multiple air quality datasets in a prototype data fusion system in Google Earth Engine, the quantification of uncertainties associated with our data fusion approach, and the development of user interfaces and visualization tools to convey air quality information in a way which best meets end-user needs.

Carl Malings↗

NASA NTRS1981

Crop classification using multidate/multifrequency radar data

Both C- and L-band radar data acquired over a test site near Colby, Kansas during the summer of 1978 were used to identify three types of vegetation cover and bare soil. The effects of frequency, polarization, and the look angle on the overall accuracy of recognizing the four types of ground cover were analyzed. In addition, multidate data were used to study the improvement in recognition accuracy possible with the addition of temporal information. The soil moisture conditions had changed considerably during the temporal sequence of the data; hence, the effects of soil moisture on the ability to discriminate between cover types were also analyzed. The results provide useful information needed for selecting the parameters of a radar system for monitoring crops.

Ulaby, F. T.↗

NASA NTRS2005

Data Assimilation and Data Fusion for Planetary Atmospheres

The overarching goal of this Cooperative Agreement was to develop a model and procedures for the data assimilation of planetary spacecraft atmospheric observations. Data assimilation - in its application to weather analysis and prediction - is the process of finding an initial state of the meteorological variables (winds, temperatures, pressures, etc.) of an atmosphere, which, when propagated forward in time using a deterministic general circulation model, reproduces all of the available observations over that time to within the measurement and computational errors. With this definition, data assimilation is seen to be a natural extension of well-known least-squares minimization techniques. The primary complication arises from the scale of the problem: For the Martian atmosphere with the available nadir-viewing Thermal Emission Spectrometer data from Mars Global Surveyor, approximately 1,000,000 individual measurements of channel radiances (in the 15-micrometer region, where these radiances relate directly to the surface and atmospheric temperature) were made per day. A suitable general circulation model for dealing with this data set has on the order of 20,000 independent variables. After some spatial and temporal averaging of the data - which provides a necessary statistical estimate of the representativeness of the measurements, a crucial issue in data assimilation - the problem reduces in scale to the solution of approximately 50,000 equations for the 20,000 variables.

Houben, Howard↗

NASA NTRS1977

Temporal variations in atmospheric water vapor and aerosol optical depth determined by remote sensing

By automatically tracking the sun, a four-channel solar radiometer was used to continuously measure optical depth and atmospheric water vapor. The design of this simple autotracking solar radiometer is presented. A technique for calculating the precipitable water from the ratio of a water band to a nearby nonabsorbing band is discussed. Studies of the temporal variability of precipitable water and atmospheric optical depth at 0.610, 0.8730 and 1.04 microns are presented. There was good correlation between the optical depth measured using the autotracker and visibility determined from National Weather Service Station data. However, much more temporal structure was evident in the autotracker data than in the visibility data. Cirrus clouds caused large changes in optical depth over short time periods. They appear to be the largest deleterious atmospheric effect over agricultural areas that are remote from urban pollution sources.

Pitts, D. E.↗