Search NASA⌕ Search

SEARCH · Search NASA

Results for “VISCOSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Analysis of oil lubricated, fluid film, thrust bearings with allowance for temperature dependent viscosity

A preliminary design study was performed to seek a fluid-film thrust bearing design intended to be part of a high-speed, hybrid (rolling element/fluid film) bearing configuration. The base line used is a design previously tested. To improve the accuracy of theoretical predictions of load capacity, flow rate, and friction power loss, an analytical procedure was developed to include curvature effects inherent in thrust bearings and to allow for the temperature rise in the fluid due to viscous heating. Also, a narrow-groove approximation in the treatment of the temperature field was formulated to apply the procedure to the Whipple thrust bearing. A comparative trade-off study was carried out assuming isothermal films; its results showed the shrouded-step design to be superior to the Whipple design for the intended application. An extensive parametric study was performed, employing isoviscous calculations, to determine the optimized design, which was subsequently recalculated allowing for temperature effects.

Pan, C. H. T.↗
NASA NTRS1973

Prediction and evaluation of eddy-viscosity models for free mixing

Analysis for the turbulent mixing of free jets is presented in this paper and compared to recent experimental results. A turbulent mass diffusion model is presented and is based on the concentration potential core. The model yielded good results when compared with the experimental results except for low-speed flows where few experimental data are available. A review of recent experimental results verifies again that the three diffusion processes in turbulent mixing are interrelated; however, no single diffusion model may be used for all three processes. This is especially true when pressure gradients are present in the flow field. It is shown that even though momentum diffusion is significantly affected by pressure gradients, mass diffusion is not. It is further indicated that the mass diffusion model has been derived and is based on the accurate correlations of experimental results obtained for the concentration potential core. Similar techniques may be used in deriving an expression for the momentum and thermal diffusion coefficients. These expressions would be more complicated since they would have to take care of the boundary layer at the start of the mixing region. Finally, a comparison of the analyses, using this particular model and Ferri's model, with available experimental results is made.

Zakkay, V.↗
NASA NTRS1974

An eddy-viscosity treatment of the unsteady turbulent boundary layer on a flat plate in an expansion tube

An analysis is presented for the relaxation of a turbulent boundary layer on a semiinfinite flat plate after passage of a shock wave and a trailing driver gas-driven gas interface. The problem has special application to expansion tube flows. The flow-governing equations have been transformed into the Lamcrocco variables. The numerical results indicate that a fully turbulent boundary layer relaxes faster to the final steady-state values of heat transfer and skin-friction than a fully laminar boundary layer.

Gupta, R. N.↗
NASA NTRS1975

Theoretical monochromatic-wave-induced currents in intermediate water with viscosity and nonzero mass transport

Wave-induced mass-transport current theories with both zero and nonzero net mass (or volume) transport of the water column are reviewed. A relationship based on the Longuet-Higgens theory is derived for wave-induced, nonzero mass-transport currents in intermediate water depths for a viscous fluid. The relationship is in a form useful for experimental applications; therefore, some design criteria for experimental wave-tank tests are also presented. Sample parametric cases for typical wave-tank conditions and a typical ocean swell were assessed by using the relation in conjunction with an equation developed by Unluata and Mei for the maximum wave-induced volume transport. Calculations indicate that substantial changes in the wave-induced mass-transport current profiles may exist dependent upon the assumed net volume transport. A maximum volume transport, corresponding to an infinite channel or idealized ocean condition, produces the largest wave-induced mass-transport currents. These calculations suggest that wave-induced mass-transport currents may have considerable effects on pollution and suspended-sediments transport as well as buoy drift, the surface and midlayer water-column currents caused by waves increasing with increasing net volume transports. Some of these effects are discussed.

Talay, T. A.↗
NASA NTRS1976

A simple solution of sound transmission through an elastic wall to a rectangular enclosure, including wall damping and air viscosity effects

A simple solution to the problem of the acoustical coupling between a rectangular structure, its air content, and an external noise source is presented. This solution is a mathematical expression for the normalized acoustic pressure inside the structure. Numerical results for the sound-pressure response for a specified set of parameters are also presented.

Nahavandi, A. N.↗
NASA NTRS1979

Deaerating high-viscosity silicon rubber

Method utilizing a modified hand operated centrifuge is used to deaerate high velocity (6,000 poise) silicon rubber for economical production of void-free silicon rubber seals.

Gabriel, R. W.↗
NASA NTRS1979

Fermi liquid viscosity in a finite geometry

Forced flow of a Fermi liquid is studied for a cell geometry consisting of two planes with a separation on the order of mean free path. An approximate transport equation is used to derive an integral equation for the velocity profile, which is solved numerically. Results for the total flux through the cell, which determines the dissipation, are given as a function of the Knudsen number N (ratio of cell thickness to mean free path). Effects of specular reflection at the boundaries are considered. It is found that the dissipation has a minimum at N approximately equal to 1/2, and behaves linearly for N greater than or equal to 3. Implications for present experimentation are discussed.

Jaffe, J. E.↗
NASA NTRS1979

An artificial viscosity method for the design of supercritical airfoils

A numerical technique is presented for the design of two-dimensional supercritical wing sections with low wave drag. The method is a design mode of the analysis code H which gives excellent agreement with experimental results and is widely used in the aircraft industry. Topics covered include the partial differential equations of transonic flow, the computational procedure and results; the design procedure; a convergence theorem; and description of the code.

Mcfadden, G. B.↗
NASA NTRS1979

Fermi liquid viscosity in a finite geometry

Forced flow of a Fermi liquid is studied for a cell geometry consisting of two planes with a separation on the order of the mean free path. An approximate transport equation is used to derive an integral equation for the velocity profile, which is solved numerically. Results for the total flux through the cell, which determines the dissipation, are given as a function of the Knudsen number kappa (ratio of cell thickness to mean free path). Effects of specular reflection at the boundaries are considered. It is found that the dissipation has a minimum at kappa of 1/2, and behaves linearly for kappa not less than 3. Implications for present experimentation are discussed.

Jaffe, J. E.↗
NASA NTRS1983

A numerical study of the steady scalar convective diffusion equation for small viscosity

A time-independent convection diffusion equation is studied by means of a compact finite difference scheme and numerical solutions are compared to the analytic inviscid solutions. The correct internal and external boundary layer behavior is observed, due to an inherent feature of the scheme which automatically produces upwind differencing in inviscid regions and the correct viscous behavior in viscous regions.

Giles, M. B.↗
NASA NTRS1985

Equation for Electrolyte Viscosity

Equation agrees with measurements over wide concentration range. Plot of calculated values from equation and measured values show close match except at extremely low concentrations of electrolyte. Other equations do not match data as well and limited to dilute solutions.

Fedors, R. F.↗
NASA NTRS1984

TVD finite difference schemes and artificial viscosity

The total variation diminishing (TVD) finite difference scheme can be interpreted as a Lax-Wendroff scheme plus an upwind weighted artificial dissipation term. If a particular flux limiter is chosen and the requirement for upwind weighting is removed, an artificial dissipation term which is based on the theory of TVD schemes is obtained which does not contain any problem dependent parameters and which can be added to existing MacCormack method codes. Numerical experiments to examine the performance of this new method are discussed.

Davis, S. F.↗
NASA NTRS1984

Effects of viscosity and modes on transonic aerodynamic and aeroelastic characteristics of wings

The unsteady transonic aerodynamic and aeroelastic behavior of a rectangular wing with a NACA 64A010 profile and a swept-back wing with a supercritical MBB-A3 profile is investigated analytically, applying 2D analysis of viscous effects to the 3D case. The results are presented in graphs and tables and discussed. It is found that the inclusion of viscous effects increases the flutter speed of the wings.

Guruswamy, G. P.↗