Search NASA⌕ Search

SEARCH · Search NASA

Results for “air traffic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Using an Automated Air Traffic Simulation Capability for a Parametric Study in Traffic Flow Management

Flight delays occur when demand for capacity-constrained airspace or airports exceeds predicted capacity. Demand for capacity-constrained airspace or airports can be controlled by a series of Traffic Management Initiatives (TMIs), which use departure and airborne delays, as well as pre-departure and airborne reroutes, to manage access to the constrained resources. Two systems exist in current and planned future operations to address imbalances between demand and capacity. The Collaborative Trajectory Options Program (CTOP) reduces demand to constrained resources by assigning strategic departure delay and pre-departure reroutes. Reroutes are selected from Trajectory Options Sets (TOSs) submitted by airlines. As flights approach the constrained resource, the Time-Based Flow Management System (TBFM) is used to assign tactical delay to satisfy constraints. This paper describes experiments performed to study the impact of varying levels of airline participation in CTOP via submission of TOSs on ground delay and flight time, and the impact of departure uncertainty on TBFM delays. Results suggest that as CTOP participation increases, average ground delays decrease for all airlines, but to the greatest extent for airlines participating in CTOP. A threshold in CTOP participation, which varies with the constraint capacity, is identified beyond which there is relatively little further reduction in average ground delays. Similarly, given the likely level of CTOP participation, the capacity reduction for which CTOP would be an appropriate TMI is also identified. Results also suggest that high average departure errors and high variability in departure error can make the prioritization of TBFM internal departures in TBFM metering and scheduling infeasible. Departure errors at current levels are, however, acceptable.

CTOP↗

Using an Automated Air Traffic Simulation Capability for a Parametric Study in Traffic Flow Management

Flight delays occur when demand for capacity-constrained airspace or airports exceeds predicted capacity. Demand for capacity-constrained airspace or airports can be controlled by a series of Traffic Management Initiatives (TMIs), which use departure and airborne delays, as well as pre-departure and airborne reroutes, to manage access to the constrained resources. Two systems exist in current and planned future operations to address imbalances between demand and capacity. The Collaborative Trajectory Options Program (CTOP) reduces demand to constrained resources by assigning strategic departure delay and pre-departure reroutes. Reroutes are selected from Trajectory Options Sets (TOSs) submitted by airlines. As flights approach the constrained resource, the Time-Based Flow Management System (TBFM) is used to assign tactical delay to satisfy constraints. This paper describes experiments performed to study the impact of varying levels of airline participation in CTOP via submission of TOSs on ground delay and flight time, and the impact of departure uncertainty on TBFM delays. Results suggest that as CTOP participation increases, average ground delays decrease for all airlines, but to the greatest extent for airlines participating in CTOP. A threshold in CTOP participation, which varies with the constraint capacity, is identified beyond which there is relatively little further reduction in average ground delays. Similarly, given the likely level of CTOP participation, the capacity reduction for which CTOP would be an appropriate TMI is also identified. Results also suggest that high average departure errors and high variability in departure error can make the prioritization of TBFM internal departures in TBFM metering and scheduling infeasible. Departure errors at current levels are, however, acceptable.

integrated demand management↗

Autonomous Inspection of Electrical Transmission Structures with Airborne UV Sensors and Automated Air Traffic Management

This report details test and measurement flights to demonstrate autonomous UAV (Unmanned Aerial Vehicle) inspection of high-voltage electrical transmission structures. A UAV built with commercial, off-the-shelf hardware and software, supplemented with custom sensors and logging software, measured ultraviolet (UV) emissions from a test generator placed on a low-altitude substation and a medium-altitude switching tower. Since corona discharge precedes catastrophic electrical faults on high-voltage structures, detection and geolocation of ultraviolet emissions is needed to develop a UAV-based self-diagnosing power grid. Signal readings from an onboard ultraviolet sensor were validated during flight with a commercial corona camera. Geolocation was accomplished with onboard GPS; the UAV position was logged to a local ground station and transmitted in real time to a NASA server for tracking in the national airspace. The method has practicality and relevance but not adequacy; either improved UAV position determination technology or increased sensor range is needed to enable broad deployment of this method.

Moore, Andrew J.↗

Air Traffic Management Demonstration II (ATD-2): Washington Center Training

This is the ATD-2 training presentation for ZDC. The original presentation was completed September 2017.The metering modes are described above. These will be updated depending on Modeset by the Ramp Manager, STBO Client will also display the Metering Mode Icon onthe right hand corner of the Toolbar.

Center training↗

Tool-Enabled Changes in Terminal Air Traffic Controller Task and Workload Distribution

A human-in-the-loop simulation was conducted that examined an approach to adjusting airport arrivals in such a way as to enable higher departure throughput while maintaining arrival throughput. This approach, referred to as Departure-Sensitive Arrival Spacing (DSAS), leverages the capabilities of the Terminal Sequencing and Spacing (TSS) system with an additional Decision Support Tool (DST) to assign more precise arrival spacing interval. This presentation will focus on the changes observed in the task distribution and control strategies among three Terminal Radar Approach Control (TRACON) controller participants and the workload associated with those changes across three conditions: Baseline, TSS, and DSAS. Results showed that the application of the DSTs in the TSS condition and those in the DSAS condition enabled a progressive reduction in the number of clearances issued and for the clearances to be issued earlier, further away from the airport. In doing so, there was also a greater use of speed control versus vectoring and altitude for schedule conformance in the TSS and DSAS conditions respectively and relative to Baseline. Workload also shifted in conjunction with the clearance distribution with an overall reduction across conditions. The changes in task and workload distribution enabled a shift from tactical to strategic control, which allowed for a more predictable and efficient delivery of arrivals.

task↗

Air Traffic Management Technology Demonstration-1 (ATD-1) Avionics Phase 2 Flight Test Training for Interval Management

Prior to the successful flight test validation of a new avionics prototype, participants from Boeing, Honeywell, and United Airlines underwent group training at NASA Langley Research Center. New prototype software for an algorithm which enables greater efficiency in high-density airspace, called Interval Management, was to be incorporated into Electronic Flight Bags and placed in the cockpit for pilot usage. The goals of the training were to teach the flight test pilots how to operate the new software, establish techniques to simultaneously position three aircraft prior to each test scenario, and ensure a common communication protocol among team members when coordinating the position of aircraft for the next scenario. The multi-tiered interactive training regimen consisted of a process that continually built upon previous foundational material. The primary learning elements were 1) a portable computer-based trainer that was provided to the pilots prior to classroom training sessions, 2) classroom learning, 3) full mock-up simulator training, and 4) refresher training just prior to the flight test. Each part of the regimen was designed to repeat and build upon the previous element. The purpose of this Technical Memorandum is to inform the aviation industry how flight training for Interval Management was conducted at Langley Research Center in order to reduce overall development costs of future Interval Management training programs. Secondly, the paper provides insight regarding the decision-making process when attempting to conduct a flight test.

Roper, Roy D.↗

Conflict Resolution Strategies for Balloon-Airship Encounters in Upper Class E Air Traffic Management (ETM)

This paper examines strategic conflict resolution strategies for pair-wise high-altitude balloon, airship encounters. By strategic is meant that the conflict is identified (detected) at the time of flight plan submission or flight plan alteration through a service, such as an ETM Service Supplier (ESS). We investigate optimal control solutions for two classes of problems: non-cooperative, where the balloon must alter its ascent trajectory in order to avoid the airship and cooperative, where both vehicles make maneuvers through a negotiation protocol.

airship balloon negotiation optimal control↗

Conflict Resolution Strategies for Balloon-Airship Encounters in Upper Class E Air Traffic Management (ETM)

This paper examines strategic conflict resolution strategies for pair-wise high-altitude balloon, airship encounters. By strategic is meant that the conflict is identified (detected) at the time of flight plan submission or flight plan alteration through a service, such as an ETM Service Supplier (ESS). We investigate optimal control solutions for two classes of problems: non-cooperative, where the balloon must alter its ascent trajectory in order to avoid the airship and cooperative, where both vehicles make maneuvers through a negotiation protocol.

airship balloon negotiation optimal control↗

Greenhouse Gas Emission Estimations for 2016-2020 using the Sherlock Air Traffic Data Warehouse

Data and analyses are presented on the utilization of aircraft in the U.S. and the greenhouse gas emissions that they create. Commercial passenger and cargo aviation flight data, captured in the Sherlock data warehouse at NASA Ames over the five years from 2016 to 2020, is used to estimate the miles flown by major aircraft models. The estimates for aggregate annual number of flights are validated against data published by the Bureau of Transportation Statistics. The corresponding fuel usage is estimated using the International Civilian Aviation Organization (ICAO) fuel use tables and carbon dioxide emissions are calculated using a fuel-use multiplicative factor. A key conclusion of this analysis is that a small number of long-haul flights (with ranges greater than 2485 statute miles) create a disproportionately large fraction (30%) of annual total U.S. aviation-related carbon dioxide emissions, while a relatively large number of short flights (less than 311 statute miles) contribute a small net amount (less than 5%) of U.S. aviation-related carbon dioxide emissions. These U.S. results are consistent with a similar recent 2020 emissions study conducted by EUROCONTROL.

Emissions↗

Future Airspace Operations: UTM-Inspired Air Traffic Management

We need to prepare airspace system to accommodate diversity, density and complexity of future operations. Current system will reach its peak due to use of old technology and human-in-the-loop nature to accommodate new entrants. Talk will focus on how an ATM system can be made ready to meet the future needs. Author will discuss a number of lessons based on Unmanned Aircraft System Traffic Management (UTM) could be leveraged to prepare for future.

future airspace operations↗

Responsible AI Framework for Air Traffic Management

Future system will require increased levels of automation to address increased diversity, density, environmental considerations resulting in higher complexity. Will automation be able to manage off-nominal, non-normal, unexpected, contingency situations?

artificial intelligence↗