Search NASA⌕ Search

SEARCH · Search NASA

Results for “atom migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Ab Initio and Kinetic Rate Theory Modeling of 316SS with Oversized Solute Additions on Radiation-Induced Segregation

Deleterious effects of radiation in nuclear reactor systems cause material degradation and the potential for component failure. Radiation damage is fundamentally due to freely migrating point defects produced in collision cascades. A reduction in the freely migrating point defect population should, then, reduce radiation damage and increase component lifetime. The addition of oversized solute atoms such as Zr or Hf to 316SS, a common structural material in reactors, is expected to reduce point defect population through a trapping mechanism that enhances recombination. The mechanism, however, requires a strong binding energy between the oversized solute atom and vacancies in order for the mechanism to significantly reduce the defect population. Experimental measurements of this binding energy are unavailable, but can be determined with atomistic calculations. Ab initio methods are used here to determine binding energies and atomic volumes of either Hf or Zr oversized solutes with vacancies in a face-centered cubic Fe matrix. The binding energies are then used to parameterize a kinetic rate-theory model, which is used here to calculate radiation-induced segregation (RIS). The calculated values of RIS are then compared to experimental measurements to benchmark the calculations and offer insight into the proposed point defect trapping mechanism. (author)

36 MATERIALS SCIENCE↗

Reversible migration of silver on memorized pathways in Ag-Ge{sub 40}S{sub 60} films

Reversible and reproducible formation and dissolution of silver conductive filaments are studied in Ag-photodoped thin-film Ge{sub 40}S{sub 60} subjected to electric fields. A tip-planar geometry is employed, where a conductive-atomic-force microscopy tip is the tip electrode and a silver patch is the planar electrode. We highlight an inherent “memory” effect in the amorphous chalcogenide solid-state electrolyte, in which particular silver-ion migration pathways are preserved “memorized” during writing and erasing cycles. The “memorized” pathways reflect structural changes in the photodoped chalcogenide film. Structural changes due to silver photodoping, and electrically-induced structural changes arising from silver migration, are elucidated using Raman spectroscopy. Conductive filament formation, dissolution, and electron (reduction) efficiency in a lateral device geometry are related to operation of the nano-ionic Programmable Metallization Cell memory and to newly emerging chalcogenide-based lateral geometry MEMS technologies. The methods in this work can also be used for qualitative multi-parameter sampling of metal/amorphous-chalcogenide combinations, characterizing the growth/dissolution rates, retention and endurance of fractal conductive filaments, with the aim of optimizing devices.

36 MATERIALS SCIENCE↗

The Viscosity and Atomic Structure of Volatile-Bearing Melilititic Melts at High Pressure and Temperature and the Transport of Deep Carbon

Understanding the viscosity of mantle-derived magmas is needed to model their migration mechanisms and ascent rate from the source rock to the surface. High pressure–temperature experimental data are now available on the viscosity of synthetic melts, pure carbonatitic to carbonate–silicate compositions, anhydrous basalts, dacites and rhyolites. However, the viscosity of volatile-bearing melilititic melts, among the most plausible carriers of deep carbon, has not been investigated. In this study, we experimentally determined the viscosity of synthetic liquids with ~31 and ~39 wt% SiO 2 , 1.60 and 1.42 wt% CO 2 and 5.7 and 1 wt% H 2 O, respectively, at pressures from 1 to 4.7 GPa and temperatures between 1265 and 1755 °C, using the falling-sphere technique combined with in situ X-ray radiography. Our results show viscosities between 0.1044 and 2.1221 Pa·s, with a clear dependence on temperature and SiO 2 content. The atomic structure of both melt compositions was also determined at high pressure and temperature, using in situ multi-angle energy-dispersive X-ray diffraction supported by ex situ microFTIR and microRaman spectroscopic measurements. Our results yield evidence that the T–T and T–O (T = Si,Al) interatomic distances of ultrabasic melts are higher than those for basaltic melts known from similar recent studies. Based on our experimental data, melilititic melts are expected to migrate at a rate ~from 2 to 57 km·yr -1 in the present-day or the Archaean mantle, respectively.

36 MATERIALS SCIENCE↗

Stress-dependent solute energetics in W–Re alloys from first-principles calculations

Here, we present a systematic study of Re solute transport energetics in W using density functional theory calculations. The study focuses on substitutional solute diffusion in the presence of dislocation strain fields as a first step toward capturing the essential physics of solid solution hardening/softening in W–Re alloys. We calculate the heat of solution, the vacancy formation energy and the solute migration energy as functions of both hydrostatic and shear strains. Our results show that the vacancy formation energy scales with hydrostatic deformation, whereas it decreases with increasing shear strain. The migration energy decreases with hydrostatic deformation, whereas it displays path-length-dependent behavior under shear deformation. In addition, we compute the binding energies of an Re solute atom to the cores of $1/2 \langle 111 \rangle$ screw and edge dislocations, and find the binding energy to be highest in the tensile lobe of the edge core. Finally, we obtain the dilatational stress due to a solute atom as a function of distance. Our calculations are then used to parameterize the jump rate of Re atoms in W as a function of the underlying stress state.

36 MATERIALS SCIENCE↗

Structure and oxidation state of hematite surfaces reacted with aqueous Fe(II) at acidic and neutral pH

Structural changes and surface oxidation state were examined following the reaction of hematite (0 0 1), (0 1 2), and (1 1 0) with aqueous Fe(II). X-ray reflectivity measurements indicated that Fe(II) induces changes in the structure of all three surfaces under both acidic (pH 3) and neutral (pH 7) conditions. The structural changes were generally independent of pH although the extent of surface transformation varied slightly between acidic and neutral conditions; no systematic trends with pH were observed. Induced changes on the (1 1 0) and (0 1 2) surfaces include the addition or removal of partial surface layers consistent with either growth or dissolution. In contrast, a <1 nm thick, discontinuous film formed on the (0 0 1) surface that appears to be epitaxial yet is not a perfect extension of the underlying hematite lattice, being either structurally defective, compositionally distinct, or nanoscale in size and highly relaxed. Resonant anomalous X-ray reflectivity measurements determined that the surface concentration of Fe(II) present after reaction at pH 7 was below the detection limit of approximately 0.5–1 μmol/m 2 on all surfaces. These observations are consistent with Fe(II) oxidative adsorption, whereby adsorbed Fe(II) is oxidized by structural Fe(III) in the hematite lattice, with the extent of this reaction controlled by surface structure at the atomic scale. The observed surface transformations at pH 3 show that Fe(II) oxidatively adsorbs on hematite surfaces at pH values where little net adsorption occurs, based on historical macroscopic Fe(II) adsorption behavior on fine-grained hematite powders. This suggests that Fe(II) plays a catalytic role, in which an electron from an adsorbed Fe(II) migrates to and reduces a lattice Fe(III) cation elsewhere, which subsequently desorbs in a scenario with zero net reduction and zero net adsorption. Finally, given the general pH-independence and substantial mass transfer involved, this electron and atom exchange process appears to be a significant subsystem within macroscopic pH-dependent Fe(II) adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local traps as nanoscale reaction-diffusion probes: B clustering in c-Si

A series of B implantation experiments into initially amorphized and not fully recrystallized Si, i.e., into an existing a/c-Si bi-layer material, have been conducted. We varied B dose, energy, and temperature during implantation process itself. Significant B migration has been observed within c-Si part near the a/c-interface and near the end-of-range region before any activation annealing. We propose a general concept of local trapping sites as experimental probes of nanoscale reaction-diffusion processes. Here, the a/c-Si interface acts as a trap, and the process itself is explored as the migration and clustering of mobile BI point defects in nearby c-Si during implantation at temperatures from 77 to 573 K. We find that at room temperature—even at B concentrations as high as 1.6 atomic %, the key B-B pairing step requires diffusion lengths of several nm owing to a small, ∼0.1 eV, pairing energy barrier. Thus, in nanostructures doped by ion implantation, the implant distribution can be strongly influenced by thermal migration to nearby impurities, defects, and interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase-field model for diffusion-induced grain boundary migration: An application to battery electrodes

Diffusion-induced grain boundary migration is a phenomenon in which a grain boundary moves in response to the driving forces generated by diffusing solute species. For example, diffusing solute species change the atomic volume in the host material, either by filling a vacancy with a misfitting solute atom or by expanding host lattices through interstitial diffusion. These volume changes are inhomogeneous and are stored as elastic energy in the material that drives grain boundaries. In this paper, we introduce our previously developed Cahn-Hilliard–phase-field-crystal model (CH-PFC) as a computational tool to investigate diffusion-induced grain boundary migration in crystalline materials. This multiscale phase-field model couples the composition field of a diffusing species with the crystallographic texture of a host material. We apply the CH-PFC model to battery electrodes and investigate whether interstitial solute diffusion induces grain growth in FePO 4 /LiFePO 4 electrodes. To this end, we compute grain growth in 60 FePO 4 electrodes by conducting two parallel trials: In the first trial, we cycle the electrode and calculate diffusion-induced grain growth. In the second trial, we do not cycle the electrode and calculate curvature-driven grain growth. We find a statistically significant grain growth in the cycled electrodes and negligible grain growth in the noncycled electrodes. Altogether, we show that the CH-PFC model not only predicts electrode microstructures as a function of the Li composition, but also predicts the crystallographic features of an electrode during battery operation.

36 MATERIALS SCIENCE↗

Role of Y-Al oxides during extended recovery process of a ferritic ODS alloy

The microstructural stability of Y-Al oxides during the recrystallization of Fe-Cr-Al oxide dispersion strengthened alloy is studied in this work. The goal is to determine the specific distribution pattern of oxides depending where they are located: in the matrix or at the grain boundaries. It was concluded that those located at the grain boundaries yielded a faster coarsening than the ones in the matrix, although no significant differences in composition and/or crystal structure were observed. However, the recrystallization heat treatment leads to the dissolution of the Y 2 O 3 and its combination with Al to form the YAlO 3 perovskite oxide particles process, mainly located at the grain boundaries. Lastly, atom probe tomography analysis revealed a significant Ti build-up at the grain boundaries that might affect subsequent migration during recrystallization.

36 MATERIALS SCIENCE↗

Helium irradiated cavity formation and defect energetics in Ni-based binary single-phase concentrated solid solution alloys

In this study, binary single-phase concentrated solid solution alloys (SPCSAs), including Ni 80 Co 20 , Ni 80 Fe 20 , Ni 80 Cr 20 , Ni 80 Pd 20 , and Ni 80 Mn 20 (in atomic percentage), were irradiated with 200 keV He + ions at 500 °C. He cavity size and density distribution were systematically investigated using transmission electron microscope. Here we show that alloying elements have a clear impact on He cavity formation. Cavity size is the smallest in Ni 80 Mn 20 but the largest in Ni 80 Co 20 . Alloying elements could also substantially affect cavity density profile. In-depth examination of cavities at peak damage region (~500 nm) and at low damage region (~300 nm) demonstrates that cavity size is depth (damage) dependent. Competition between consumption and production of vacancies and He atoms could lead to varied cavity size. Density functional theory (DFT) calculations were performed to obtain the formation and migration energies of interstitials and vacancies. Combined experimental and simulation results show that smaller energy gap between interstitial and vacancy migration energies may lead to smaller cavity size and narrower size distribution observed in Ni 80 Mn 20 , comparing with Ni 80 Co 20 . Finally, the results of this study call attention to alloying effects of specific element on cavity formation and defect energetics in SPCSAs, and could provide fundamental understanding to predict radiation effects in more complexed SPCSAs, such as high entropy alloys.

36 MATERIALS SCIENCE↗

Coarsening of nanoscale (Ti,Mo)C precipitates in different ferritic matrixes

Coarsening of nanoscale (Ti,Mo)C precipitates within quasi-polygonal ferritic (QPF) matrix and polygonal ferritic (PF) matrix is studied via HRTEM and In-situ heating TEM. Influenced by different nucleation processes, inverse coarsening process showing dissolution of large clustered precipitates and growth of small interphase precipitates is directly observed in the PF matrix. However, due to the evolution of high-density subboundaries, coarsening of precipitates in QPF matrix is mainly characterized by the subboundary migration assisted coarsening process, during which arch-like coarsened precipitates form after the sweeping of subboundaries. Analysis of atomic structure clarify that “imposts” of the arch-like coarsened precipitates are established by the re-precipitation of solute atoms from movable subboundary to the close packed planes {111} of (Ti,Mo)C precipitates, and that the “key stones” are constructed due to the change of re-precipitation planes to {200}. Geometric phase analysis (GPA) illustrates that not only the change of re-precipitation direction during the formation of arch-like precipitates, but also the selective coarsening of clustered precipitates in PF matrix, is caused by the highly anisotropic strain field around (Ti,Mo)C precipitates.

36 MATERIALS SCIENCE↗

Study of Tritium Diffusivity in Pure and Sn-Defective Zr: A First-Principles Density Functional Theory Approach

Zirconium alloys (e.g., zircaloy-4) are used as tritium ( 3 H) getter materials in tritium-producing burnable absorber rods (TPBARs) owing to their ability to capture 3 H and chemically convert them into metal hydrides. Understanding of 3 H diffusion mechanisms in zircaloy is crucial for the optimal design of material performance in nuclear technology. Here, for this work, we perform first-principles density functional theory calculations to study the 3 H diffusion mechanism in pure and impure Zr with a low concentration of tin (Sn) atoms to determine the impact of the presence of Sn on the movement of 3 H atoms through the material. First, we calculated the diffusion barriers for 3 H in pure Zr by taking different migration pathways. We then introduced a low concentration of Sn impurity and systematically explored the impurity effect on the diffusion barriers for 3 H. Using our calculated diffusion energy barriers, we further obtained the diffusion coefficients and analyzed the results by comparing them with the experimental and previously calculated values. A diffusion coefficient of the order of 10 –8 m 2 /s is predicted. We also found that the presence of a Sn impurity could reduce the diffusivity up to 4 orders of magnitude. In conclusion, our results could serve as guidelines for further experimental investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Twinning-like lattice reorientation without a crystallographic twinning plane

Twinning on the {$10\bar{1}2$} plane is a common mode of plastic deformation for hexagonal-close-packed metals. Here we report, by monitoring the deformation of submicron-sized single-crystal magnesium compressed normal to its prismatic plane with transmission electron microscopy, the reorientation of the parent lattice to a ‘twin’ lattice, producing an orientational relationship akin to that of the conventional {$10\bar{1}2$} twinning, but without a crystallographic mirror plane, and giving plastic strain that is not simple shear. Aberration corrected transmission electron microscopy observations reveal that the boundary between the parent lattice and the ‘twin’ lattice is composed predominantly of semi-coherent basal/ prismatic interfaces instead of the {$10\bar{1}2$} twinning plane. The migration of this boundary is dominated by the movement of these interfaces undergoing basal/prismatic transformation via local rearrangements of atoms. This newly discovered deformation mode by boundary motion mimics conventional deformation twinning but is distinct from the latter and, as such, broadens the known mechanisms of plasticity.

36 MATERIALS SCIENCE↗

Evolution of (001) and (111) facets for selective epitaxial growth inside submicron trenches

The evolution of (001) and (111) facets for the epitaxial growth inside submicron trenches is systematically studied in this report. The analysis with the method of “Lagrange multiplier” indicates the equilibrium crystal shape. In the case of non-equilibrium without external fluxes, we employed the “weighted mean curvature” method to mathematically model the inter-facet migration rate for two extreme kinetic cases: “surface diffusion limited” and “surface attachment/detachment limited.” Coupled with external supply of atoms, the self-limited behavior of facet size is theoretically predicted. Moreover, we find that the self-limited stable facet size in trenches of different widths has a specific relationship determined by the surface energy ratio, kinetic rate ratio, and isolated growth rate difference. The two limited cases could be discriminated according to the mathematical fitting of one exponent in this relationship based on the stable facet size in trenches of different widths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure across the β to α phase transition in thermoelectric Cu 2– x Se

Here, the crystal structure uniquely imparts the specific properties of a material, and thus provides the starting point for any quantitative understanding of thermoelectric properties. Cu 2–x Se is an intensely studied high performing, non-toxic and cheap thermoelectric material, and here for the first time, the average structure of β-Cu 2–x Se is reported based on analysis of multi-temperature single-crystal X-ray diffraction data. It consists of Se–Cu layers with additional copper between every alternate layer. The structural changes during the peculiar zT enhancing phase transition mainly consist of changes in the inter-layer distance coupled with subtle Cu migration. Just prior to the transition the structure exhibits strong negative thermal expansion due to the reordering of Cu atoms, when approached from low temperatures. The phase transition is fully reversible and group–subgroup symmetry relations are derived that relate the low-temperature β-phase to the high-temperature α-phase. Weak superstructure reflections are observed and a possible Cu ordering is proposed. The structural rearrangement may have a significant impact on the band structure and the Cu rearrangement may also be linked to an entropy increase. Both factors potentially contribute to the extraordinary zT enhancement across the phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An analysis of migration paths of Li{sup +} cations in ternary oxygen-containing compounds Li{sup p}X{sup q}O{sup r}

A new method was developed for studying voids and channels in crystal structures based on the Voronoi-Dirichlet partition of crystal space, and 822 structurally characterized ternary compounds Li{sup p}X{sup q}O{sup r} were analyzed for the first time. For these compounds, the dimensionality was determined and the migration patterns of channel systems capable of providing lithium-ion transport were constructed. The calculated coordinates of lithium atoms in the centers of the voids are consistent (within 0.4 A) with the known structural data. Among these compounds, 113 compounds have infinite channel systems, 60 compounds (18 structural types, STs) have been described earlier in the literature as solid electrolytes, and 53 compounds (23 STs) can be considered as potential one-, two-, or three-dimensional ionic conductors (13, 3, and 7 STs, respectively).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of interface bonding and defects on boron diffusion at Si/SiO{sub 2} interface

We perform first-principles density functional calculations to find the migration pathway and barrier for B diffusion at the Si/SiO{sub 2} interface. For various interface models, in which crystalline α-quartz or amorphous silica (a-SiO{sub 2}) is placed on Si, we examine stable and metastable configurations of B-related defects which play a role in B diffusion. While a substitutional B alone is immobile in Si, it tends to diffuse to the interface via an interstitialcy mechanism in the presence of a self-interstitial and then changes into an interstitial B in oxide via a kick-out mechanism, leaving the self-interstitial at the interface. At the defect-free interface, where bridging O atoms are inserted to remove interface dangling bonds, an interstitial B prefers to intervene between the interface Si and bridging O atoms and subsequently diffuses through the hollow space or along the network of the Si-O-Si bonds in oxide. The overall migration barriers are calculated to be 2.02–2.12 eV at the Si/α-quartz interface, while they lie in the range of 2.04 ± 0.44 eV at the Si/a-SiO{sub 2} interface, similar to that in α-quartz. The migration pathway and barrier are not significantly affected by interface defects such as suboxide bond and O protrusion, while dangling bonds in the suboxide region can increase the migration barrier by about 1.5 eV. The result that the interface generally does not hinder the B diffusion from Si to SiO{sub 2} assists in understanding the underlying mechanism for B segregation which commonly occurs at the Si/SiO{sub 2} interface.

36 MATERIALS SCIENCE↗

Observation Of Electron-beam-induced Phase Evolution Mimicking The Effect Of Charge-discharge Cycle In Li-rich Layered Cathode Materials Used For Li-ion Batteries

Capacity loss, and voltage fade upon electrochemical charge-discharge cycling observed in lithium-rich layered cathode oxides (Li[LixMnyTM1-x-y]O2 , TM = Ni, Co or Fe) have recently been identified to be correlated to the gradual phase transformation, featuring the formation of a surface reconstructed layer (SRL) that evolves from a thin (<2 nm), defect spinel layer upon the first charge, to a relatively thick (~5 nm), spinel or rock-salt layer upon continuous charge-discharge cycling. Here we report observations of a SRL and structural evolution of the SRL on the Li[Li0.2Ni0.2Mn0.6]O2 (LMR) particles, which are identical to those reported due to the charge-discharge cycle but are a result of electron-beam irradiation during scanning transmission electron microscopy (STEM) imaging. Sensitivity of the lithium-rich layered oxides to high-energy electrons leads to the formation of thin, defect spinel layer on surfaces of the particles when exposed to a 200 kV electron beam for as little as 30 seconds under normal high-resolution STEM imaging conditions. Further electron irradiation produces a thicker layer of the spinel phase, ultimately producing a rock-salt layer at a higher electron exposure. Atomic-scale chemical mapping by energy dispersive X-ray spectroscopy in STEM indicates the electron-beam-induced SRL formation on LMR is accomplished by migration of the transition metal ions to the Li sites without breaking down the lattice. This study provides an insight for understanding the mechanism of forming the SRL and also possibly a mean to study structural evolution in the Li-rich layered oxides without involving the electrochemistry.

Environmental Molecular Sciences Laboratory↗

Energetics and structural properties of twist grain boundaries in Cu

Structural and energetics properties of atoms near a grain boundary are of great importance from theoretical and experimental standpoints. From various experimental work it is concluded that diffusion at low temperatures at polycrystalline materials take place near grain boundary. Experimental and theoretical results also indicate changes of up to 70 percent in physical properties near a grain boundary. The Embedded Atom Method (EAM) calculations on structural properties of Au twist grain boundaries are in quite good agreement with their experimental counterparts. The EAM is believed to predict reliable values for the single vacancy formation energy as well as migration energy. However, it is not clear whether the EAM functions which are fitted to the bulk properties of a perfect crystalline solid can produce reliable results on grain boundaries. One of the objectives of this work is to construct the EAM functions for Cu and use them in conjunction with the molecular static simulation to study structures and energetics of atoms near twist grain boundaries in Cu. This provides tests of the EAM functions near a grain boundary. In particular, we determine structure, single vacancy formation energy, migration energy, single vacancy activation energy, and interlayer spacing as a function of distance from grain boundary. Our results are compared with the available experimental and theoretical results from grain boundaries and bulk.

Karimi, Majid↗