Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Sodium bromide electron-extraction layers for polymer bulk-heterojunction solar cells

Inexpensive and non-toxic sodium bromide (NaBr) was introduced into polymer solar cells (PSCs) as the cathode buffer layer (CBL) and the electron extraction characteristics of the NaBr CBL were investigated in detail. The PSCs based on NaBr CBL with different thicknesses (i.e., 0 nm, 0.5 nm, 1 nm, and 1.5 nm) were prepared and studied. The optimal thickness of NaBr was 1 nm according to the photovoltaic data of PSCs. The open-circuit voltage (V{sub oc}), short-circuit current density (J{sub sc}), fill factor (FF), and power conversion efficiency (PCE) of the PSC with 1 nm NaBr were evaluated to be 0.58 V, 7.36 mA/cm{sup 2}, 0.63, and 2.70%, respectively, which were comparable to those of the reference device with the commonly used LiF. The optimized photovoltaic performance of PSC with 1 nm NaBr was ascribed to the improved electron transport and extraction capability of 1 nm NaBr in PSCs. In addition, the NaBr CBL could prevent the diffusion of oxygen and water vapor into the active layer and prolong the lifetime of the devices to some extent. Therefore, NaBr layer could be considered as a promising non-toxic CBL for PSCs in future.

36 MATERIALS SCIENCE↗

Low threading dislocation density GaAs growth on on-axis GaP/Si (001)

We report a systematic study of high quality GaAs growths on on-axis (001) GaP/Si substrates using molecular beam epitaxy. Various types of dislocation filter layers and growth temperatures of initial GaAs layer were investigated to reduce the threading dislocation densities in GaAs on GaP/Si. Electron channeling contrast imaging techniques revealed that an optimized GaAs buffer layer with thermal cycle annealing and InGaAs/GaAs dislocation filter layers has a threading dislocation density of 7.2 × 106 cm−2, which is a factor of 40 lower than an unoptimized GaAs buffer. The root-mean-square surface roughness was greatly decreased from 7.8 nm to 2.9 nm after the optimization process. A strong enhancement in photoluminescence intensity indicates that the optimized GaAs template grown on on-axis (001) GaP/Si substrates is a promising virtual substrate for Si-based optoelectronic devices.

Jung, Daehwan↗

Si Complies with GaN to Overcome Thermal Mismatches for the Heteroepitaxy of Thick GaN on Si

Heteroepitaxial growth of lattice mismatched materials has advanced through the epitaxy of thin coherently strained layers, the strain sharing in virtual and nanoscale substrates, and the growth of thick films with intermediate strain‐relaxed buffer layers. However, the thermal mismatch is not completely resolved in highly mismatched systems such as in GaN‐on‐Si. Here, geometrical effects and surface faceting to dilate thermal stresses at the surface of selectively grown epitaxial GaN layers on Si are exploited. The growth of thick (19 µm), crack‐free, and pure GaN layers on Si with the lowest threading dislocation density of 1.1 × 10 7 cm −2 achieved to date in GaN‐on‐Si is demonstrated. With these advances, the first vertical GaN metal–insulator–semiconductor field‐effect transistors on Si substrates with low leakage currents and high on/off ratios paving the way for a cost‐effective high power device paradigm on an Si CMOS platform are demonstrated

Tanaka, Atsunori↗

Polarity-inverted ScAlN film growth by ion beam irradiation and application to overtone acoustic wave (000-1)/(0001) film resonators

Polarity inversion in wurtzite film is generally achieved by the epitaxial growth on a specific under-layer. We demonstrate polarity inversion of c-axis oriented ScAlN films by substrate ion beam irradiation without using buffer layer. Substrate ion beam irradiation was induced by either sputtering a small amount of oxide (as a negative ion source) onto the cathode or by applying a RF bias to the substrate. Polarity of the films was determined by a press test and nonlinear dielectric measurement. Second overtone thickness extensional mode acoustic resonance and suppression of fundamental mode resonance, indicating complete polarity inversion, were clearly observed in bilayer highly oriented (000-1)/(0001) ScAlN film.

36 MATERIALS SCIENCE↗

Monolithically integrated InGaAs/GaAs/AlGaAs quantum well laser grown by MOCVD on exact Ge/Si(001) substrate

We report on realization of the InGaAs/GaAs/AlGaAs quantum well laser grown by metallorganic chemical vapor deposition on a virtual Ge-on-Si(001) substrate. The Ge buffer layer has been grown on a nominal Si(001) substrate by solid-source molecular beam epitaxy. Such Ge buffer possessed rather good crystalline quality and smooth surface and so provided the subsequent growth of the high-quality A{sub 3}B{sub 5} laser structure. The laser operation has been demonstrated under electrical pumping at 77 K in the continuous wave mode and at room temperature in the pulsed mode. The emission wavelengths of 941 nm and 992 nm have been obtained at 77 K and 300 K, respectively. The corresponding threshold current densities were estimated as 463 A/cm{sup 2} at 77 K and 5.5 kA/cm{sup 2} at 300 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature multiferroic properties of (Bi{sub 0.95}La{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3}/NiFe{sub 2}O{sub 4} double layered thin film

Graphical abstract: - Highlights: • Chemical solution deposition of (Bi{sub 0.95}La{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3}–NiFe{sub 2}O{sub 4} double layered thin film. • Studies on structural, electrical and multiferroic properties. • NiFe{sub 2}O{sub 4} acts as both resistive buffer layer and magnetic source. - Abstract: (Bi{sub 0.95}La{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3}/NiFe{sub 2}O{sub 4} double layered thin film was prepared on a Pt(111)/Ti/SiO{sub 2}/Si(100) substrate by a chemical solution deposition method. X-ray diffraction and Raman scattering spectroscopy studies confirmed the formation of the distorted rhombohedral perovskite and the inverse spinel cubic structures for the (Bi{sub 0.95}La{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3}/NiFe{sub 2}O{sub 4} double layered thin film. The (Bi{sub 0.95}La{sub 0.05})(Fe{sub 0.97}Mn{sub 0.03})O{sub 3}/NiFe{sub 2}O{sub 4} double layered thin film exhibited well saturated ferromagnetic (2 M{sub r} of 18.1 emu/cm{sup 3} and 2H{sub c} of 0.32 kOe at 20 kOe) and ferroelectric (2P{sub r} of 60 μC/cm{sup 2} and 2E{sub c} of 813 kV/cm at 866 kV/cm) hysteresis loops with low order of leakage current density (4.5 × 10{sup −6} A/cm{sup 2} at an applied electric field of 100 kV/cm), which suggest the ferroelectric and ferromagnetic multi-layers applications in real devices.

36 MATERIALS SCIENCE↗

Epitaxial TiN(001) wetting layer for growth of thin single-crystal Cu(001)

Single-crystal Cu(001) layers, 4-1400 nm thick, were deposited on MgO(001) with and without a 2.5-nm-thick TiN(001) buffer layer. X-ray diffraction and reflection indicate that the TiN(001) surface suppresses Cu-dewetting, yielding a 4 x lower defect density and a 9 x smaller surface roughness than if grown on MgO(001) at 25 deg. C. In situ and low temperature electron transport measurements indicate that ultra-thin (4 nm) Cu(001) remains continuous and exhibits partial specular scattering at the Cu-vacuum boundary with a Fuchs-Sondheimer specularity parameter p = 0.6 {+-} 0.2, suggesting that the use of epitaxial wetting layers is a promising approach to create low-resistivity single-crystal Cu nanoelectronic interconnects.

36 MATERIALS SCIENCE↗

Thickness Effect of Al-Doped ZnO Window Layer on Damp Heat Stability of CuInGaSe2 Solar Cells: Preprint

We investigated the damp heat (DH) stability of CuInGaSe2 (CIGS) solar cells as a function of thickness of the Al-doped ZnO (AZO) window layer from the 'standard' 0.12 ..mu..m to a modest 0.50 ..mu..m over an underlying 0.10-..mu..m intrinsic ZnO buffer layer. The CIGS cells were prepared with external electrical contact using fine Au wire to the tiny 'standard' Ni/Al (0.05 ..mu..m/3 ..mu..m)metal grid contact pads. Bare cell coupons and sample sets encapsulated in a specially designed, Al-frame test structure with an opening for moisture ingress control using a TPT backsheet were exposed to DH at 85oC and 85% relative humidity, and characterized by current-voltage (I-V), quantum efficiency (QE), and (electrochemical) impedance spectroscopy (ECIS). The results show that bare cellsexhibited rapid degradation within 50-100 h, accompanied by film wrinkling and delamination and corrosion of Mo and AlNi grid, regardless of AZO thickness. In contrast, the encapsulated cells did not show film wrinkling, delamination, and Mo corrosion after 168 h DH exposure; but the trend of efficiency degradation rate showed a weak correlation to the AZO thickness.

14 SOLAR ENERGY↗

Thickness Effect of Al-Doped ZnO Window Layer on Damp-Heat Stability of CuInGaSe2 Solar Cells

We investigated the damp heat (DH) stability of CuInGaSe{sub 2} (CIGS) solar cells as a function of thickness of the Al-doped ZnO (AZO) window layer from the 'standard' 0.12 {micro}m to a modest 0.50 {micro}m over an underlying 0.10-{micro}m intrinsic ZnO buffer layer. The CIGS cells were prepared with external electrical contact using fine Au wire to the tiny 'standard' Ni/Al (0.05 {micro}m/3 {micro}m) metal grid contact pads. Bare cell coupons and sample sets encapsulated in a specially designed, Al-frame test structure with an opening for moisture ingress control using a TPT backsheet were exposed to DH at 85 C and 85% relative humidity, and characterized by current-voltage (I-V), quantum efficiency (QE), and (electrochemical) impedance spectroscopy (ECIS). The results show that bare cells exhibited rapid degradation within 50-100 h, accompanied by film wrinkling and delamination and corrosion of Mo and AlNi grid, regardless of AZO thickness. In contrast, the encapsulated cells did not show film wrinkling, delamination, and Mo corrosion after 168 h DH exposure; but the trend of efficiency degradation rate showed a weak correlation to the AZO thickness.

14 SOLAR ENERGY↗

Hierarchical Co{sub 3}O{sub 4}@PPy core-shell composite nanowires for supercapacitors with enhanced electrochemical performance

Highlights: • PPy were decorated on Co{sub 3}O{sub 4} nanowire surface via in-situ chemical polymerization. • Specific capacitance of 2122 F g{sup −1}at 5 mA cm{sup −2} was obtained. • The synergistic effect effectively enhanced electrochemical performance. - Abstract: Hierarchical Co{sub 3}O{sub 4}@ polypyrrole (PPy) core-shell composite nanowires (NWs) were successfully fabricated by a template-free hydrothermal route combined with in-situ chemical polymerization. Based on the composition and morphology characterization, it is found that the well-aligned Co{sub 3}O{sub 4} nanowires were uniformly coated with a thin layer of amorphous PPy. When directly used as an electrode material for supercapacitors, the Co{sub 3}O{sub 4}@PPy nanowire arrays exhibited high specific capacitance of 2122 F g{sup −1} (3.18 Fcm{sup −2}) at 5 mA cm{sup −2}, which is much higher than that of the pristine Co{sub 3}O{sub 4} nanowire arrays and improved cycling stability with 77.8% capacitance retention over 5000 cycles at 25 mA cm{sup −2}. The highly electronic conductive and electroactive PPy layer could significantly reduce charge transfer resistance and increase active sites. This synergistic strategy of the arrays structure and the PPy buffer layer can provide simple, efficient and versatile blue-prints for fabrication of Co{sub 3}O{sub 4}-based nanocomposites for extending its application for electrochemical energy storage.

36 MATERIALS SCIENCE↗

Band alignment of front contact layers for high-efficiency CdTe solar cells

Resistive oxide materials play an important role in the front contact of CdTe solar cells. The high-resistance transparent (HRT) or “buffer” layer has been used extensively in CdTe thin-film photovoltaics to enable a reduction in CdS thickness while maintaining near-maximum device voltage and fill factor. SnO 2 - and ZnO-based alloys were tested as HRT layers on a fluorine-doped tin oxide transparent conducting oxide. SnO 2 -based alloy HRT layers were deposited via atmospheric pressure chemical vapor deposition (APCVD). Alloying ZnO with MgO to create MgxZn 1–x O (MZO) via radio-frequency sputter deposition was explored as a way to reduce the electron affinity of ZnO HRT layers. Additionally, to fully understand the behavior of these materials, many devices were fabricated with either no CdS layer, a sublimated CdS layer, or a sputtered, oxygenated CdS layer. MZO layers resulted in high open-circuit voltage and device efficiency even with the complete elimination of the CdS layer. In both HRT systems, controlling electron affinity to optimize front contact band alignment is an important consideration. Band measurements using photoelectron spectroscopy and synchrotron techniques correlate band alignment measurements with efficiency parameters in the design of HRT and CdS layers.

14 SOLAR ENERGY↗

Study of the structural and optical properties of GaP(N) layers synthesized by molecular-beam epitaxy on Si(100) 4° substrates

The structural and optical properties of GaP and GaPN layers synthesized by molecular-beam epitaxy on Si(100) substrates misoriented by 4° are studied. The possibility of producing GaP buffer layers that exhibit a high degree of heterointerface planarity and an outcropping dislocation density of no higher than ~2 × 10{sup 8} cm{sup –2} is shown. Emission from the Si/GaP/GaPN structure in the spectral range of 630–640 nm at room temperature is observed. Annealing during growth of the Si/GaP/GaPN structure makes it possible to enhance the room-temperature photoluminescence intensity by a factor of 2.6, with no shift of the maximum of the emission line.

36 MATERIALS SCIENCE↗

Recent progress in degradation and stabilization of organic solar cells

Stability is of paramount importance in organic semiconductor devices, especially in organic solar cells (OSCs). Serious degradation in air limits wide applications of these flexible, light-weight and low-cost power-generation devices. Studying the stability of organic solar cells will help us understand degradation mechanisms and further improve the stability of these devices. There are many investigations into the efficiency and stability of OSCs. The efficiency and stability of devices even of the same photoactive materials are scattered in different papers. In particular, the extrinsic degradation that mainly occurs near the interface between the organic layer and the cathode is a major stability concern. In the past few years, researchers have developed many new cathodes and cathode buffer layers, some of which have astonishingly improved the stability of OSCs. In this review article, we discuss the recent developments of these materials and summarize recent progresses in the study of the degradation/stability of OSCs, with emphasis on the extrinsic degradation/stability that is related to the intrusion of oxygen and water. The review provides detailed insight into the current status of research on the stability of OSCs and seeks to facilitate the development of highly-efficient OSCs with enhanced stability.

Cao, Huanqi↗

Sn-enriched Ge/GeSn nanostructures grown by MBE on (001) GaAs and Si wafers

Elastically stressed metastable GeSn layers with a tin molar fraction as large as 0.185 are grown on (001) Si and GaAs wafers covered with a germanium buffer layer. A set of wafers with a deviation angle in the range 0°–10° is used. It is established that the GeSn crystal undergoes monoclinic deformation with the angle β to 88° in addition to tetragonal deformation. Misorientation of the wafers surface results in increasing efficiency of the incorporation of tin adatoms into the GeSn crystal lattice. Phase separation in the solid solution upon postgrowth annealing of the structures begins long before the termination of plastic relaxation of elastic heteroepitaxial stresses. Tin released as a result of GeSn decomposition predominantly tends to be found on the surface of the sample. Manifestations of the brittle–plastic mechanism of the relaxation of stresses resulting in the occurrence of microcracks in the subsurface region of the structures under investigation are found.

36 MATERIALS SCIENCE↗

Optical characterization of free electron concentration in heteroepitaxial InN layers using Fourier transform infrared spectroscopy and a 2 Multiplication-Sign 2 transfer-matrix algebra

Fourier Transform Infrared (FTIR) reflectance spectroscopy has been implemented as a non-destructive, non-invasive, tool for the optical characterization of a set of c-plane InN single heteroepitaxial layers spanning a wide range of thicknesses (30-2000 nm). The c-plane (0001) InN epilayers were grown by plasma-assisted molecular beam epitaxy (PAMBE) on GaN(0001) buffer layers which had been grown on Al{sub 2}O{sub 3}(0001) substrates. It is shown that for arbitrary multilayers with homogeneous anisotropic layers having their principal axes coincident with the laboratory coordinates, a 2 Multiplication-Sign 2 matrix algebra based on a general transfer-matrix method (GTMM) is adequate to interpret their optical response. Analysis of optical reflectance in the far and mid infrared spectral range has been found capable to discriminate between the bulk, the surface and interface contributions of free carriers in the InN epilayers revealing the existence of electron accumulation layers with carrier concentrations in mid 10{sup 19} cm{sup -3} at both the InN surface and the InN/GaN interface. The spectra could be fitted with a three-layer model, determining the different electron concentration and mobility values of the bulk and of the surface and the interface electron accumulation layers in the InN films. The variation of these values with increasing InN thickness could be also sensitively detected by the optical measurements. The comparison between the optically determined drift mobility and the Hall mobility of the thickest sample reveals a value of r{sub H} = 1.49 for the Hall factor of InN at a carrier concentration of 1.11 Multiplication-Sign 10{sup 19} cm{sup -3} at 300 Degree-Sign {Kappa}.

36 MATERIALS SCIENCE↗

Flux pinning enhancements in YBa2Cu3O7-8 superconductors through phase separated, self-assembled LaMnO3-MgO nanocomposite films.

Technological applications of high temperature superconductors (HTS) require high critical current density, Jc, under operation at high magnetic field strengths. This requires effective flux pinning by introducing artificial defects through creative processing. In this work, we generated correlated disorder for strong vortex pinning in the YBa2Cu3O7- (YBCO) films by replacing the standard LaMnO3 (LMO) cap buffer layers in ion beam assisted deposited MgO templates with LMO:MgO composite films. Such films revealed formation of two phase-separated, but at the same time vertically aligned, self-assembled composite nanostructures that extend throughout the entire thickness of the film. Measurements of magnetic-field orientation-dependent Jc of YBCO coatings deposited on these nanostructured cap layers showed correlated c-axis pinning and improved in-field Jc performance compared to those of YBCO films deposited on standard LMO buffers. The present results demonstrate feasibility of novel and potentially practical approaches in the pursuit of more efficient, economical, and high performance superconducting devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural investigations of hydrogenated epitaxial graphene grown on 4H-SiC (0001)

Structural investigations of hydrogenated epitaxial graphene grown on SiC(0001) are presented. It is shown that hydrogen plays a dual role. In addition to contributing to the well-known removal of the buffer layer, it goes between the graphene planes, resulting in an increase of the interlayer spacing to 3.6 Å–3.8 Å. It is explained by the intercalation of molecular hydrogen between carbon planes, which is followed by H{sub 2} dissociation, resulting in negatively charged hydrogen atoms trapped between the graphene layers, with some addition of covalent bonding to carbon atoms. Negatively charged hydrogen may be responsible for p-doping observed in hydrogenated multilayer graphene.

36 MATERIALS SCIENCE↗

Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells

Here, we demonstrated that inserting a tunneling layer between perovskite and electron transport layer could significantly increase device performance by suppressing carrier recombination at the cathode contact. The tunneling layer can also serve as an encapsulation layer to prevent perovskite film from damage caused by water or moisture. This method is simple because it does not need lattice matching between the buffer layer and perovskite. The low temperature solution process makes it compatible with many types of perovskite materials, and may be applied for anode contact as well. The freedom to choose any insulating layer for contact enables more device designs and manufacturing.

25 ENERGY STORAGE↗