Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Carbon Negative Synthesis of Amino Acids Using a Cell-Free-Based Biocatalyst

Biological systems can directly upgrade carbon dioxide (CO 2 ) into chemicals. The CO 2 fixation rate of autotrophic organisms, however, is too slow for industrial utility, and the breadth of engineered metabolic pathways for the synthesis of value-added chemicals is too limited. Biotechnology workhorse organisms with extensively engineered metabolic pathways have recently been engineered for CO 2 fixation. Yet, their low carbon fixation rate, compounded by the fact that living organisms split their carbon between cell growth and chemical synthesis, has led to only cell growth with no chemical synthesis achieved to date. Here, we engineer a lysate-based cell-free expression (CFE)-based multienzyme biocatalyst for the carbon negative synthesis of the industrially relevant amino acids glycine and serine from CO 2 equivalents–formate and bicarbonate–and ammonia. The formate-to-serine biocatalyst leverages tetrahydrofolate (THF)-dependent formate fixation, reductive glycine synthesis, serine synthesis, and phosphite dehydrogenase-dependent NAD(P)H regeneration to convert 30% of formate into serine and glycine, surpassing the previous 22% conversion using a purified enzyme system. We find that (1) the CFE-based biocatalyst is active even after 200-fold dilution, enabling higher substrate loading and product synthesis without incurring additional cell lysate cost, (2) NAD(P)H regeneration is pivotal to driving forward reactions close to thermodynamic equilibrium, (3) balancing the ratio of the formate-to-serine pathway genes added to the CFE is key to improving amino acid synthesis, and (4) efficient THF recycling enables lowering the loading of this cofactor, reducing the cost of the CFE-based biocatalyst. To our knowledge, this is the first synthesis of amino acids that can capture CO 2 equivalents for the carbon negative synthesis of amino acids using a CFE-based biocatalyst. Looking ahead, the CFE-based biocatalyst process could be extended beyond serine to pyruvate, a key intermediate, to access a variety of chemicals from aromatics and terpenes to alcohols and polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparison of water nanodroplet properties on different graphite-based substrates

The molecular structure and dynamics of water differ considerably at various interfaces. We compare the interfacial water structure–property relationship on three different carbon substrates, namely, amorphous carbon, compressed expanded natural graphite, and pure graphite by utilizing atomistic molecular dynamics simulations. The effect of different substrates on the structural and dynamical properties of water can readily be observed. Here, the density distributions parallel and normal to the substrates show oblate droplet structures. The normal to the substrate water distribution shows a strong hydration layer at the interface that does not vary with substrates. However, the disparity in the structure and dynamics on three different substrates shows that the surface morphologies of the substrates are critical for determining nanoscale water properties. Furthermore, it is observed that the formation of an interfacial water layer or the hydration layer is a direct consequence of both water “confinement” at the nanoscale and “attraction” between water molecules and the carbon substrates.

42 ENGINEERING↗
NASA NTRS1999

Lightweight Exhaust Manifold and Exhaust Pipe Ducting for Internal Combustion Engines

An improved exhaust system for an internal combustion gasoline-and/or diesel-fueled engine includes an engine exhaust manifold which has been fabricated from carbon- carbon composite materials in operative association with an exhaust pipe ducting which has been fabricated from carbon-carbon composite materials. When compared to conventional steel. cast iron. or ceramic-lined iron paris. the use of carbon-carbon composite exhaust-gas manifolds and exhaust pipe ducting reduces the overall weight of the engine. which allows for improved acceleration and fuel efficiency: permits operation at higher temperatures without a loss of strength: reduces the "through-the wall" heat loss, which increases engine cycle and turbocharger efficiency and ensures faster "light-off" of catalytic converters: and, with an optional thermal reactor, reduces emission of major pollutants, i.e. hydrocarbons and carbon monoxide.

Northam, G. Burton↗
NASA NTRS1996

Fullerene Propellant Research for Electric Propulsion

The large mass, low first ionization potential and large electron impact ionization cross-section make Buckminsterfullerene (carbon 60) potentially attractive as an ion engine propellant. It has the potential for significant increases in engine efficiency over that obtained with xenon at specific impulses less than 3 000 s. One problem encountered in fullerene ion engines has been dissociation of the propellant. Previously this was attributed to thermal decomposition due to operation of the ion engine at temperatures greater than 1073 K. However, during tests conducted at temperatures lower than 1073 K fullerene fragmentation was still observed. This prompted an investigation to determine if the dissociation was still due to thermal effects or if it was due to collisional processes in the discharge chamber.

fullerenes↗
DOE OSTI2022

Tuning Fluorination of Linear Carbonate for Lithium-Ion Batteries

Liquid electrolyte engineering plays a critical role in modern lithium-ion batteries. However, the existing electrolytes fall short when used with some trending battery chemistries such as high-voltage and high-energy-density electrodes. Fluorination of electrolyte solvents has been identified as an effective approach for improved cyclability, but few works systematically studied the effects of fluorination extent of carbonate solvents on battery performance. Here we design and synthesize a family of fluorinated ethyl methyl carbonates. Different numbers of F atoms are finely tuned to yield monofluoroethyl methyl carbonate (F1EMC), difluoroethyl methyl carbonate (F2EMC) and trifluoroethyl methyl carbonate (F3EMC). The cycling behavior of several types of lithium-ion pouch cells, including graphite (Gr)/single-crystalline LiNi 0.8 Mn 0.1 Co 0.1 O 2 (SC-NMC811), Gr-SiO x /LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), high-voltage Gr/LiNi 0.5 Mn 1.5 O 4 (LNMO), Gr/layered Li-rich Mn-based oxide (LLMO) and fast-charging Gr/NMC622, were systematically investigated to understand the impact of fluorination degree. Compared to the commercially available F3EMC, we found that the partially-fluorinated F1EMC and F2EMC in some cases showed improved cycling stability, which we attribute to their locally-polar –CH 2 F and –CHF 2 groups and thus fast ion conduction than –CF 3 . This work suggests that highly or fully fluorinated solvents are not necessarily desirable; instead, fluorination degree needs to be rationally and finely tuned for optimized lithium-ion cell performance.

25 ENERGY STORAGE↗
NASA NTRS1997

Thermal Conductivity Database of Various Structural Carbon-Carbon Composite Materials

Advanced thermal protection materials envisioned for use on future hypersonic vehicles will likely be subjected to temperatures in excess of 1811 K (2800 F) and, therefore, will require the rapid conduction of heat away from the stagnation regions of wing leading edges, the nose cap area, and from engine inlet and exhaust areas. Carbon-carbon composite materials are candidates for use in advanced thermal protection systems. For design purposes, high temperature thermophysical property data are required, but a search of the literature found little thermal conductivity data for carbon-carbon materials above 1255 K (1800 F). Because a need was recognized for in-plane and through-the-thickness thermal conductivity data for carbon-carbon composite materials over a wide temperature range, Langley Research Center (LaRC) embarked on an effort to compile a consistent set of thermal conductivity values from room temperature to 1922 K (3000 F) for carbon-carbon composite materials on hand at LaRC for which the precursor materials and thermal processing history were known. This report documents the thermal conductivity data generated for these materials. In-plane thermal conductivity values range from 10 to 233 W/m-K, whereas through-the-thickness values range from 2 to 21 W/m-K.

Ohlhorst, Craig W.↗
DOE OSTI2023

Microbial production of fuels, commodity chemicals, and materials from sustainable sources of carbon and energy

Anthropogenic carbon emissions are driving rapid changes to the earth's climate, disrupting whole ecosystems and endangering the stability of human society. Innovations in engineered microbial fermentation enable the fossil resource-free production of fuels, commodity chemicals, and materials, thereby reducing the carbon emissions associated with these products. Microorganisms have been engineered to catabolize sustainable sources of carbon and energy (i.e., plant biomass, plastic waste, and one-carbon feedstocks) and biosynthesize carbon-neutral or carbon-negative products. These engineering efforts exploit and optimize natural biological pathways or generate unnatural pathways which can biosynthesize chemicals that have not yet been accessed using synthetic chemistry. Further, recent advances in microbial fermentation seek not only to maximize the titer, rate, and yield of desired products, but also to tailor microbial catabolism to utilize inexpensive feedstocks. Ultimately, these advances aim to lower the cost of bioproduction so that microorganism-derived chemicals can be economically competitive with fossil-derived chemicals.

09 BIOMASS FUELS↗
DOE OSTI2026

Nondestructive Evaluation of Carbon Fiber Reinforced Polymers

The American Society of Mechanical Engineers Boiler and Pressure Vessel Code requires repair and replacement of safety-related piping materials to meet the original Construction Code; however, no construction criteria currently exist for carbon fiber reinforced polymer (CFRP) materials in the nuclear industry. Although nondestructive examination (NDE) techniques for cast and wrought ferritic and austenitic steels are well established, licensees are increasingly deploying novel materials such as CFRP for which assessment of the use of NDE is required, as the inspectability of such materials and the influence of manufacturing processes on inspectability remain insufficiently understood. To address these gaps, Pacific Northwest National Laboratory (PNNL) evaluated the fabrication of several CFRP repair mockups and the effectiveness of NDE methods to support regulatory review of CFRP repairs in nuclear power plant applications. Representative flat-plate mockups containing realistic fabrication defects were manufactured and inspected using manual and automated tap testing, dynamic response spectroscopy (DRS), and ultrasonic testing (UT). The study identified significant fabrication variability, particularly in controlling defect size and epoxy thickness, which strongly influenced defect detectability by NDE methods. Tap testing was effective for shallow defects in thin epoxy configurations but unreliable for thicker repairs and deeper flaws. DRS demonstrated higher sensitivity to dry spots but produced unconfirmed indications for thicker plates, requiring further validation. Conventional UT, particularly at 1.0 MHz, showed the strongest overall capability for detecting a range of defects, although performance degraded with increasing repair thickness and complexity. The results highlight the need to better define critical defect sizes, develop reliable mockup fabrication methods, and validate NDE methods needed to support CFRP repairs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Full-scale FEED Study for Retrofitting the Prairie State Generating Station with an 816 MWe Capture Plant using Mitsubishi Heavy Industries Post-Combustion CO 2 Capture Technology

A full front-end engineering design (FEED) study to for a carbon capture system for Unit #2 (816 MWe) at the Prairie State Generating Company’s (PSGC) Energy Campus in Marissa, IL based on the KM CDR Process CO 2 capture technology from Mitsubishi Heavy Industries (MHI) using their proprietary solvent KS-21TM. If built this carbon capture plant would be the world's largest to date. The cost of capture of 100 percent of the plant emissions was calculated to be $43.42 per metric tonne of CO 2 based on levelized costs for 30 years of operation (85% capacity factor), and includes Interest on Debt and Return on Equity During Operation.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1990

Fiber-reinforced ceramic composites for Earth-to-orbit rocket engine turbines

Fiber reinforced ceramic matrix composites (FRCMC) are emerging materials systems that offer potential for use in liquid rocket engines. Advantages of these materials in rocket engine turbomachinery include performance gain due to higher turbine inlet temperature, reduced launch costs, reduced maintenance with associated cost benefits, and reduced weight. This program was initiated to assess the state of FRCMC development and to propose a plan for their implementation into liquid rocket engine turbomachinery. A complete range of FRCMC materials was investigated relative to their development status and feasibility for use in the hot gas path of earth-to-orbit rocket engine turbomachinery. Of the candidate systems, carbon fiber-reinforced silicon carbide (C/SiC) offers the greatest near-term potential. Critical hot gas path components were identified, and the first stage inlet nozzle and turbine rotor of the fuel turbopump for the liquid oxygen/hydrogen Space Transportation Main Engine (STME) were selected for conceptual design and analysis. The critical issues associated with the use of FRCMC were identified. Turbine blades were designed, analyzed and fabricated. The Technology Development Plan, completed as Task 5 of this program, provides a course of action for resolution of these issues.

Brockmeyer, Jerry W.↗