Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Water vapor in Jupiter's atmosphere

High spectral resolution observations of Jupiter at 2.7 and 5 microns acquired from the Kuiper Airborne Observatory were used to infer the vertical distribution of H2O between 0.7 and 6 bars. The H2O mole fraction, qH2O, is saturated for P<2 bars, qH2O = 4x.000001 in the 2 to 4 bar range and it increases to 3x.00001 at 6 bars where T = 288 K. The base of the 5 micron line formation region is determined by pressure-induced H2 opacity. At this deepest accessible level, the O/H ratio in Jupiter is depleted by a factor of 50 with respect to the solar atmosphere. High spatial resolution Voyager IRIS spectra of Jupiter's North Tropical Zone, Equatorial Zone, and Hot Spots in the North and South Equatorial Belt were analyzed to determine the spatial variation of H2O across the planet. The column abundance of H2O above the 4 bar level is the same in the zones as in the SEB Hot Spots, about 20 cm-amgt. A cloud model for Jupiter's belts and zones was developed in order to fit the IRIS 5 micron spectra. An absorbing cloud located at 2 bars whose 5 micron optical thickness varies between 1 in the Hot Spots and 4 in the coldest zones satisfactorily matches the IRIS data.

Bjoraker, G. L.↗

Multilayer Cloud Detection with the MODIS Near-Infrared Water Vapor Absorption Band

Data Collection 5 processing for the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the NASA Earth Observing System EOS Terra and Aqua spacecraft includes an algorithm for detecting multilayered clouds in daytime. The main objective of this algorithm is to detect multilayered cloud scenes, specifically optically thin ice cloud overlying a lower-level water cloud, that presents difficulties for retrieving cloud effective radius using single layer plane-parallel cloud models. The algorithm uses the MODIS 0.94 micron water vapor band along with CO2 bands to obtain two above-cloud precipitable water retrievals, the difference of which, in conjunction with additional tests, provides a map of where multilayered clouds might potentially exist. The presence of a multilayered cloud results in a large difference in retrievals of above-cloud properties between the CO2 and the 0.94 micron methods. In this paper the MODIS multilayered cloud algorithm is described, results of using the algorithm over example scenes are shown, and global statistics for multilayered clouds as observed by MODIS are discussed. A theoretical study of the algorithm behavior for simulated multilayered clouds is also given. Results are compared to two other comparable passive imager methods. A set of standard cloudy atmospheric profiles developed during the course of this investigation is also presented. The results lead to the conclusion that the MODIS multilayer cloud detection algorithm has some skill in identifying multilayered clouds with different thermodynamic phases

Wind, Galina↗

A Study of the Response of Deep Tropical Clouds to Mesoscale Processes: Modeling Strategies and Simulations of TOGA-COARE Convective Systems - Part 1

Interactions between deep tropical clouds over the western Pacific warm pool and the larger-scale environment are key to understanding climate change. Cloud models are an extremely useful tool in simulating and providing statistical information on heat and moisture transfer processes between cloud systems and the environment, and can therefore be utilized to substantially improve cloud parameterizations in climate models. In this paper, the Goddard Cumulus Ensemble (GCE) cloud-resolving model is used in multi-day simulations of deep tropical convective activity over the Tropical Ocean-Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE). Large-scale temperature and moisture advective tendencies, and horizontal momentum from the TOGA-COARE Intensive Flux Array (IFA) region, are applied to the GCE version which incorporates cyclical boundary conditions. Sensitivity experiments show that grid domain size produces the largest response to domain-mean temperature and moisture deviations, as well as cloudiness, when compared to grid horizontal or vertical resolution, and advection scheme. It is found that a minimum grid-domain size of 500 km is needed to adequately resolve the convective cloud features. The control experiment shows that the atmospheric heating and moistening is primarily a response to cloud latent processes of condensation/evaporation, and deposition/sublimation, and to a lesser extent, melting of ice particles. Air-sea exchange of heat and moisture is found to be significant, but of secondary importance, while the radiational response is small. The simulated rainfall and atmospheric heating and moistening, agrees well with observations, and performs favorably to other models simulating this case.

Johnson, Daniel E.↗

Atmospheric Energy Deposition Modeling and Inference for Varied Meteoroid Structures

Asteroids populations are highly diverse, ranging from coherent monoliths to loosely-bound rubble piles with a broad range of material and compositional properties. These different structures and properties could significantly affect how an asteroid breaks up and deposits energy in the atmosphere, and how much ground damage may occur from resulting blast waves. We have previously developed a fragment-cloud model (FCM) for assessing the atmospheric breakup and energy deposition of asteroids striking Earth. The approach represents ranges of breakup characteristics by combining progressive fragmentation with releases of variable fractions of debris and larger discrete fragments. In this work, we have extended the FCM to also represent asteroids with varied initial structures, such as rubble piles or fractured bodies. We have used the extended FCM to model the Chelyabinsk, Benesov, Kosice, and Tagish Lake meteors, and have obtained excellent matches to energy deposition profiles derived from their light curves. These matches provide validation for the FCM approach, help guide further model refinements, and enable inferences about pre-entry structure and breakup behavior. Results highlight differences in the amount of small debris vs. discrete fragments in matching the various flare characteristics of each meteor. The Chelyabinsk flares were best represented using relatively high debris fractions, while Kosice and Benesov cases were more notably driven by their discrete fragmentation characteristics, perhaps indicating more cohesive initial structures. Tagish Lake exhibited a combination of these characteristics, with lower-debris fragmentation at high altitudes followed by sudden disintegration into small debris in the lower flares. Results from all cases also suggest that lower ablation coefficients and debris spread rates may be more appropriate for the way in which debris clouds are represented in FCM, offering an avenue for future model refinement.

Deposition↗

Trace gas exchanges and convective transports over the Amazonian rain forest

The NASA Amazon Boundary Layer Experiment (ABLE 2A) based in Manaus, Brazil, in July and August 1985, is used to examine meteorological processes responsible for the vertical and horizontal transport of biogenic and anthropogenic trace gases generated over the Amazon basin. Direct sampling of the surrounding environment of deep convective clouds shows marked changes in the vertical distribution of the lower and midtroposphere concentration of O3 and such surface-derived species as CO, CO2, and NO. Thermodynamic observations, together with two-dimensional cloud model simulations, confirm vertical transports within the convection and provide a basis for an estimation of the magnitude and efficiency of cloud upward and downward exchanges. A distinction is drawn between local changes due to convective updrafts and downdrafts and convective overturning as a net result of the storm processes. Marked variability is seen in trace gas concentrations along horizontal flight paths in the vicinity of the convection. Interpretation of simultaneously measured thermodynamic quantities and trace gas concentrations provide the information to infer the presence and direction of atmospheric transports and/or the presence of anthropogenic influences.

Garstang, Michael↗

Physical retrieval of precipitation water contents using multisensor microwave data and model constraints

A physical retrieval method is proposed for estimating precipitation water distributions and other geophysical parameters from the Special Sensor Microwave/Imager (SSM/I) data. In the proposed method, sensor antenna functions are explicitly included to accommodate varying channel resolution. An embedded one-dimensional cloud model is utilized to generate vertical distributions of precipitating and nonprecipitating water, and spectral solutions are sought for certain background parameters, such as humidity, which vary more slowly in the horizontal than the cloud and precipitation water contents. The method allows the incorporation of measurements from SSM/T and geostationary infrared measurements in addition to SSM/I data, as well as information from conventional sources (e.g., radiosondes) or numerical forecast model fields.

Olson, William S.↗

Clustered or regular cumulus cloud fields - The statistical character of observed and simulated cloud fields

The spatial distribution of cumulus clouds is assumed to be the result of the effects of convective activity on the thermodynamic environment. The effects can be parameterized in terms of a stabilization function representing the time rate of change of convective available potential energy. Using these results, a new inhibition hypothesis explaining the expected characteristics of the spatial distribution of cumulus clouds is postulated. This paper performs a verification of the inhibition hypothesis on real and simulated cloud fields. In order to do so, an objective measure of the spatial characteristics of cumulus clouds is introduced. Multiple cloud experiments are performed with a three-dimensional numerical cloud model. Skylab pictures of real cumuli are also used in the verification. Results of applying this measure to simulated and observed cumulus cloud fields confirm the inhibition hypothesis.

Ramirez, Jorge A.↗

Expansion-cooled Lyman-alpha clouds

It is shown that recent observations by Pettini et al. (1990) which indicate that low-N H I Ly-alpha forest lines have small velocity widths and that the velocity widths are positively correlated with N (H I) can be understood as the result of adiabatic cooling of expanding clouds. It is argued that expansion cooling can efficiently lower temperatures and velocity widths of diffuse ionized clouds, and that this trend of diminishing temperature and velocity width in a wide range of plausible cloud models is consistent with double-quasar data. Expansion can provide a natural explanation for the steep z-evolution of the cloud numbers.

Duncan, Robert C.↗

Approximation for Horizontal Photon Transport in Cloud Remote Sensing Problems

The effect of horizontal photon transport within real-world clouds can be of consequence to remote sensing problems based on plane-parallel cloud models. An analytic approximation for the root-mean-square horizontal displacement of reflected and transmitted photons relative to the incident cloud-top location is derived from random walk theory. The resulting formula is a function of the average number of photon scatterings, and particle asymmetry parameter and single scattering albedo. In turn, the average number of scatterings can be determined from efficient adding/doubling radiative transfer procedures. The approximation is applied to liquid water clouds for typical remote sensing solar spectral bands, involving both conservative and non-conservative scattering. Results compare well with Monte Carlo calculations. Though the emphasis is on horizontal photon transport in terrestrial clouds, the derived approximation is applicable to any multiple scattering plane-parallel radiative transfer problem. The complete horizontal transport probability distribution can be described with an analytic distribution specified by the root-mean-square and average displacement values. However, it is shown empirically that the average displacement can be reasonably inferred from the root-mean-square value. An estimate for the horizontal transport distribution can then be made from the root-mean-square photon displacement alone.

Plantnick, Steven↗

Analysis of spectrophotometric observations of Venus in the 3-4 micron region

Spectrophotometric data of Venus in the 3-4 micron region are analyzed in the context of current ideas concerning cloud properties. The results show that a homogeneous cloud model, using a unimodal particle size distribution compatible with the results of previous polarization studies, cannot satisfactorily explain the infrared observations. Assuming a composition of 75% H2SO4, agreement is possible if an upper layer of smaller particles is added to the homogeneous cloud. This inhomogeneous cloud structure, however, is not in agreement with the polarization results. Other models, involving bimodal particle size distributions, were also unsuccessful in explaining both sets of observations in a consistent manner.

Martonchik, J. V.↗

Lunar and Planetary Science XXXVI, Part 9

The following topics were discussed: Monitoring floods with NASA's ST6 autonomous spacecraft experiment; Dynamical cloud models constrained by high resolution spectroscopy of zodiacal light; The oxygen isotopic composition of the sun and implications for oxygen processing in molecular clouds; A nochian/hisperian hiatus and erosive reactivation of martian valley networks; Hard x-ray spectro-microscopy techniques; Thermoluminescence studies of carbonaceous chondrites, etc.

Source record↗

The embedded feature model for the interpretation of chromospheric contrast profiles

Contrast profiles obtained from chromospheric filtergrams and spectra of bright and dark mottles have to date been interpreted almost exclusively in terms of Becker's cloud model. Here we demonstrate the failure of this model to account in a physically consistent way for the observed contrasts. As an alternative, we introduce an embedded-feature model, restricting our discussion in this paper to stationary features. Our model is then characterized by three independent parameters: the density of absorbing atoms, the geometrical depth, and the profile of the absorption coefficient. An analytic approximation to the contrast resulting from such a model reproduces well the observed behavior of all types of contrast profiles.

Steinitz, R.↗

Process Modeling of Aerosol‐Cloud Interaction in Summertime Precipitating Shallow Cumulus Over the Western North Atlantic

Abstract Process modeling of Aerosol‐cloud interaction (ACI) is essential to bridging gaps between observational analysis and climate modeling of aerosol effects in the Earth system and eventually reducing climate projection uncertainties. In this study, we examine ACI in summertime precipitating shallow cumuli observed during the Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE). Aerosols and precipitating shallow cumuli were extensively observed with in‐situ and remote‐sensing instruments during two research flight cases on 02 June and 07 June, respectively, during the ACTIVATE summer 2021 deployment phase. We perform observational analysis and large‐eddy simulation (LES) of aerosol effect on precipitating cumulus in these two cases. Given the measured aerosol size distributions and meteorological conditions, LES is able to reproduce the observed cloud properties by aircraft such as liquid water content (LWC), cloud droplet number concentration ( N c ) and effective radius r eff . However, it produces smaller liquid water path (LWP) and larger N c compared to the satellite retrievals. Both 02 and 07 June cases are over warm waters of the Gulf Stream and have a cloud top height over 3 km, but the 07 June case is more polluted and has larger LWC. We find that the N a ‐induced LWP adjustment is dominated by precipitation feedback for the 2 June precipitating case and there is no clear entrainment feedback in both cases. An increase of cloud fraction due to a decrease of aerosol number concentration is also shown in the simulations for the 02 June case.

54 ENVIRONMENTAL SCIENCES↗

The energetics of molecular clouds. II - The S140 molecular cloud

Techniques of analysis which allow estimates of kinetic temperature, gas density, gas cooling rate, and dust cooling rate are applied to the S140 molecular cloud. Maps of this cloud in various molecular lines are examined which reveal the existence of a strong temperature and density peak near the H-alpha rim and the presence of a strong near-IR source very near that peak. This source is found to have an energy distribution which is very similar to that of the Becklin-Neugebauer object, including the silicate feature at 9.5 microns. The heating and cooling rates for the gas and dust in S140 are estimated, and the predicted cooling rate for dust is shown to be much greater than that for gas. The molecular-line observations are compared with a spherical large-velocity-gradient trapping calculation. An optimum cloud model is developed which indicates that: (1) (C-13)O, HCO(+), and H2CO are about 10 times less abundant in S140 than in dark clouds; (2) the HCN abundance is approximately 4 times the H2CO abundance in S140, compared with roughly equal values in dark clouds; and (3) the (C-13)O/C(O-18) ratio is consistent with terrestrial isotope ratios.

Blair, G. N.↗

The formation of molecules in interstellar clouds from singly and multiply ionized atoms

The suggestion is considered that multiply ionized atoms produced by K- and L-shell X-ray ionization and cosmic-ray ionization can undergo ion-molecule reactions and also initiate molecule production. The role of X-rays in molecule production in general is discussed, and the contribution to molecule production of the C(+) radiative association with hydrogen is examined. Such gas-phase reactions of singly and multiply ionized atoms are used to calculate molecular abundances of carbon-, nitrogen-, and oxygen-bearing species. The column densities of the molecules are evaluated on the basis of a modified version of previously developed isobaric cloud models. It is found that reactions of multiply ionized carbon with H2 can contribute a significant fraction of the observed CH in diffuse interstellar clouds in the presence of diffuse X-ray structures or discrete X-ray sources and that substantial amounts of CH(+) can be produced under certain conditions.

Langer, W. D.↗

Assimilation of Global Radar Backscatter and Radiometer Brightness Temperature Observations to Improve Soil Moisture and Land Evaporation Estimates

Active radar backscatter (s◦) observations from the Advanced Scatterometer (ASCAT) and passive radiometer brightness temperature (TB) observations from the Soil Moisture Ocean Salinity (SMOS) mission are assimilated either individually or jointly into the Global Land Evaporation Amsterdam Model (GLEAM) to improve its simulations of soil moisture and land evaporation. To enable s◦ and TB assimilation, GLEAM is coupled to the Water Cloud Model and the L-band Microwave Emission from the Biosphere (L-MEB) model. The innovations, i.e. differences between observations and simulations, are mapped onto the model soil moisture states through an Ensemble Kalman Filter. The validation of surface (0-10 cm) soil moisture simulations over the period 2010-2014 against in situ measurements from the International Soil Moisture Network (ISMN) shows that assimilating s◦ or TB alone improves the average correlation of seasonal anomalies (Ran) from 0.514 to 0.547 and 0.548, respectively. The joint assimilation further improves Ran to 0.559. Associated enhancements in daily evaporative flux simulations by GLEAM are validated based on measurements from 22 FLUXNET stations. Again, the singular assimilation improves Ran from 0.502 to 0.536 and 0.533, respectively for s◦ and TB, whereas the best performance is observed for the joint assimilation (Ran = 0.546). These results demonstrate the complementary value of assimilating radar backscatter observations together with brightness temperatures for improving estimates of hydrological variables, as their joint assimilation outperforms the assimilation of each observation type separately.

GLEAM↗

Convective Influence on the Lower Stratospheric Water Vapor in the Boreal Summer Asian Monsoon Region

Processes maintaining the localized maxima in lower stratospheric watervapor over the boreal summer Asian monsoon region are investigated usingtrajectory and cloud models that resolve the detailed cloudmicrophysical processes, with observation-based convection and radiationschemes. We examine the impact of convective influence along parceltrajectories on cloud formation and dehydration by tracing thetrajectories through time-dependent fields of convective cloud topheights estimated from global rainfall and geostationary brightnesstemperatures. Parameters such as the rainfall threshold used foridentification of deep convection are derived by comparison with theCloudSat deep convective cloud top product as enhanced by colocatedCALIOP measurements. The simulated water vapor field at the 100 hPalevel and cloud occurrence frequencies in the tropical tropopause layer(TTL) are constrained by corresponding observations from MLS andCALIPSO, respectively. The observed maximum in the 100 hPa level watervapor field over the Asian monsoon region is only present in thesimulation with convective influence, indicating the importance ofconvective hydration for the summertime water vapor distribution.Convection moistens the 100 hPa level over the Asian monsoon by 1 ppmv,where 75 of this moistening is due to convection occurring locallywithin the monsoon region. Convection also increases the cloudoccurrence frequency in the TTL over the southern sector of the Asianmonsoon anticyclone by 20. Parcels are convectively hydrated in thesoutheastern sector of the anticyclone, transported westward by theanticyclonic circulation, and dehydrated in the southwestern sector. Therelative importance of extreme convective events that inject ice andwater vapor near or above the tropopause will also be examined.

convection↗

Radiative Susceptibility of Cloudy Atmospheres to Droplet Number Perturbations: 1. Theoretical Analysis and Examples from MODIS

Theoretical and satellite-based assessments of the sensitivity of broadband shortwave radiative fluxes in cloudy atmospheres to small perturbations in the cloud droplet number concentration (N) of liquid water clouds under constant water conditions are performed. Two approaches to study this sensitivity are adopted: absolute increases in N, for which the radiative response is referred to as absolute cloud susceptibility, and relative increases in N or relative cloud susceptibility. Estimating the former is more challenging as it requires an assumed value for either cloud liquid water content or geometrical thickness; both susceptibilities require an assumed relationship between the droplet volume and effective radius. Expanding upon previous susceptibility studies, present radiative calculations include the effect of AN perturbations on droplet asymmetry parameter and single-scattering albedo, in addition to extinction. Absolute cloud susceptibility has a strong nonlinear dependence on the droplet effective radius as expected, while relative cloud susceptibility is primarily dependent on optical thickness. Molecular absorption and reflecting surfaces both reduce the relative contribution of the cloud to the top-of-atmosphere (TOA) flux and therefore also reduce the TOA albedo susceptibility. Transmittance susceptibilities are negative with absolute values similar to albedo susceptibility, while atmospheric absorptance susceptibilities are about an order of magnitude smaller than albedo susceptibilities and can be either positive or negative. Observation-based susceptibility calculations are derived from MODIS pixel-level retrievals of liquid water cloud optical thickness, effective radius, and cloud top temperature; two data granule examples are shown. Susceptibility quantifies the aerosol indirect effect sensitivity in a way that can be easily computed from model fields. As such, susceptibilities derived from MODIS observations provide a higher-order test of model cloud properties used for indirect effect studies. MODIS-derived global distributions of cloud susceptibility and radiative forcing calculations are presented in a companion paper.

Platnick, Steven↗