Search NASA⌕ Search

SEARCH · Search NASA

Results for “complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermochemical Properties of a Water-Soluble Zr(IV)-Flavonolate Complex for Fluoride Sensing

Detection of fluoride in water samples is critical for monitoring many chemical, environmental, and biological processes, however, these measurements often rely on costly instrumentation. Here, this situation has motivated the design of simple to use, fieldable fluoride sensors. Previously, a fluorometric sensor based on (EDTA)­Zr­(H 2 O) 2 (EDTA = ethylenediamine-N,N,N′,N′-tetraacetate) and 3-hydroxyflavone (FlvH) was reported for fluoride detection in ethanol-H 2 O mixtures. Herein, we report the synthesis and characterization of the previously proposed Zr­(IV)-flavonolate complex as the dimethylammonium salt, [(EDTA)­Zr­(Flv)]­[NMe 2 H 2 ] (Flv = 3-hydroxyflavonolate), and detail its utility for aqueous fluoride sensing. This species exhibits an intense blue fluorescence upon excitation with near-UV light (λ ex = 390 nm; λ em = 460 nm) that is quenched in the presence of NaF (100 mM acetate buffer, pH = 5) with good sensitivity (LOD = 20.9 nM; [F – ] from 10 –8 to 10 –4 M) under neat aqueous conditions. The equilibrium constant (K eq = 1.26 ± 0.00184 × 10 8 M –2 ) and free energy (Δ$G^°_{\textrm{rxn}}$ = –11.0 kcal mol –1 ) were determined under the conditions used for fluoride sensing, indicating a highly favorable reaction with F – in water. Finally, we developed paper-based sensing strips for qualitative fluoride sensing by immobilizing the sensor in a deposited gel enabling good selectivity and reduced interference due to slower ion diffusion.

aqueous chemistry↗
DOE OSTI2025

Interface Nucleus Templating of Modular Intermetallic Morphologies: Chemical Pressure Complementarity, Columnar Domains, and Complex Disorder in Y 13 Ag 42.7 Zn 29.7

One element of the diversity of intermetallic phases is the formation of complex structures from the assembly of fragments of simpler structures. Recently, we devised the Interface Nuclear Approach as a model for understanding such modular arrangements, in which the intergrowth of different structures is driven by chemical pressure (CP) relief at shared motifs at the domain interfaces, referred to as interface nuclei. In this Article, we present the synthesis, crystal structure, and CP analysis of a new compound that expands on this theme, Y 13 Ag 42.7 Zn 29.7 . Its hexagonal structure contains interpenetrating domains based on the CaPd 5+x and EuMg 5 types. The CaPd 5+x -based regions are reminiscent of the lamellar intergrowth structures previously observed in the Y−Ag−Zn system. In Y 13 Ag 42.7 Zn 29.7 , however, the domains have a different morphology, forming columns that adopt a hexagonal rod-packing. The geometrical features of the remaining spaces are assigned, using the program GrowDomain, to the cores of trigonal units of the EuMg 5 type, while layers of disordered atoms occur at heights along z where the parent structures are mismatched. At the CaPd 5+x -type/EuMg 5 -type interfaces, simple interface nucleus motifs with strong CP-complementarity can be identified, while their distribution within the parent structures supports the notion of templated architectures in modular intermetallics.

Chemical structure↗
DOE OSTI2025

Homoleptic An(IV) Dimethyl Sulfoxide Complexes of Th–Pu Enable Insight into Solution Speciation and Redox

A family of 8- and 9- coordinate homoleptic dimethyl sulfoxide An(IV) complexes is used to evaluate the solvation properties of tetravalent actinide ions in dimethyl sulfoxide (DMSO) vs aqueous media. These compounds are prepared from aqueous mixtures of DMSO and yield crystalline solids, whose solid-state electronic absorption spectra are compared to solution phase spectra, providing insight into the solution speciation. The thermodynamics of the equilibria between the 8- and 9-coordinate compounds were determined experimentally and computationally, showing a trend that correlates with ionic radius. Cyclic voltammetry data for the +IV/+III couples of Np and Pu in the DMSO electrolyte indicate that the +IV ions are significantly stabilized compared to aqueous media due to the more donating nature of DMSO compared to water. As a result, computational studies of these systems indicate that further reactivity may take place upon reduction to the +III oxidation state.

Actinides↗
DOE OSTI2025

Influence of Compositional Complexity on Amorphization Resistance of Swift Heavy Ion Irradiated Titanate Pyrochlores

Compositionally complex oxides have garnered attention recently for their potential technological applications in harsh environments such as thermal barrier coatings and nuclear waste forms. Therefore, their response to extreme conditions, including high temperature and intense irradiation fields, must be thoroughly investigated. Here, the structural evolution of two pyrochlore oxides with comparable cation size ratio, r A /r B , (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 and Ho 2 Ti 2 O 7 , was evaluated after irradiation with 946 MeV Au ions up to a fluence of 8 × 10 12 ions/cm2 using synchrotron X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The overall radiation response is comparable for both titanate oxides and is dominated by a loss of crystallinity. When compared to a series of conventional titanate pyrochlore compositions, the amorphous track diameter of (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 is slightly larger than that of Ho2Ti2O7 and more in line with the diameter of the endmember with the maximum A-site cation size (Gd 2 Ti 2 O 7 ). Density functional theory calculations suggest that this behavior may be linked to local lattice distortions and the associated energetics of cation antisite formation. TEM and Raman analyses show that a disordered, crystalline shell surrounds the amorphous ion tracks in (Yb 0.2 Er 0.2 Dy 0.2 Tb 0.2 Gd 0.2 ) 2 Ti 2 O 7 , and the corresponding short-range structure resembles a weberite-type atomic arrangement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantum Electrodynamics Coupled-Cluster at Scale: High-Performance Implementation for Complex Systems

Coupled-cluster theory (CC) is a highly accurate and versatile method for simulating complex interactions within quantum systems. The extension of CC theory to model mixed electron-photon processes with quantum electrodynamics (QED) has improved our capability to predict cavity-modified chemistry, a field where photons are used as cost-effective and eco-friendly alternatives to catalyze/inhibit chemical reactions. However, calculations with CC methods, even without incorporating QED effects, are often prohibitively expensive. Simulations of larger systems require scalable infrastructures that exist for traditional CC methods but not for QED-CC methods. As such, we present a GPU-enabled, high-performance, open-source implementation of the quantum electrodynamics coupled-cluster method with single and double excitations (QED-CCSD) within the ExaChem quantum chemistry software package. ExaChem relies on the Tensor Algebra for Many-body Methods (TAMM) infrastructure: a parallel heterogeneous tensor library designed to achieve scalable performance on modern heterogeneous supercomputing platforms. Furthermore, we discuss theoretical foundations, algorithmic details, and numerical benchmarks to showcase the larger systems that ExaChem can simulate and how the integration of photonic degrees-of-freedom alters their ground-state properties.

Basis sets↗
DOE OSTI2025

Characterization of Two Positional Isomers of the Cs + Gly Complex Using Two-Color, IR–IR Photobleaching of the Cryogenically Cooled Ions

Metal ion binding to amino acid residues is an important interaction motif that controls the tertiary structures of oligopeptides. Analyses of the vibrational band patterns displayed by the amino acid scaffolds are commonly used to characterize the local docking motifs. Here we carry out two-color, IR-IR photobleaching measurements to obtain isomer-selective vibrational spectra of the Cs + Gly ion-molecule complex isolated in a cryogenically cooled, radiofrequency ion trap. The distinct band patterns of two non-interconverting isomers are observed and traced to different bidentate binding motifs between Cs + and the glycine scaffold. In one isomer, the ion attaches to the oxygen atoms of the carboxyl group whereas in the other it docks to the amino nitrogen and the carbonyl oxygen. Attachment to the acid head group yields a very diffuse absorption associated the OH group engaged in a strong intramolecular H-bond that closes a 5 membered ring. Furthermore, the band assignments, rearrangement pathways and electrostatic distortion of the electron density distributions in the glycine scaffold by the proximal ion are explored with electronic structure calculations and anharmonic theory.

Infrared spectroscopy↗
DOE OSTI2025

Modeling the Behavior of Complex Aqueous Electrolytes Using Machine Learning Interatomic Potentials: The Case of Sodium Sulfate

Understanding the structure and thermodynamics of solvated ions is essential for advancing applications in electrochemistry, water treatment, and energy storage. While ab initio molecular dynamics methods are highly accurate, they are limited by short accessible time and length scales whereas classical force fields struggle with accuracy. Herein, we explore the structure and thermodynamics of complex monovalent-divalent ion pairs using Na 2 SO 4 (aq) as a case study by applying a machine learning interatomic potential (MLIP) trained on density functional theory (DFT) data. Our MLIP-based approach reproduces key bulk properties such as density and radial distribution functions of water. We provide the hydration structure of the sodium and sulfate ions in the 0.1–2 M concentration range and the one-dimensional and two-dimensional potentials of mean force for the sodium–sulfate ion pairing at the low concentration limit (0.1 M), which are inaccessible to DFT. At low concentrations, the sulfate ion is strongly solvated, leading to the stabilization of solvent-separated ion pairs over contact ion pairs. Minimum energy pathway analysis revealed that coordinating two sodium ions with a sulfate ion is a multistep process whereby the sodium ions coordinate to the sulfate ion sequentially. Finally, we demonstrate that MLIPs allow the study of solvated ions beyond simple monovalent pairs with DFT-level accuracy in their low concentration limit (0.1 M) via statistically converged properties from ns-long simulations.

anions↗
DOE OSTI2026

Identification of Carbonyl Species on Palladium Supported on Ceria in Complex Microenvironments

Herein, we present a systematic comparison between Pd carbonyl (Pd-CO) species, specifically over Pd/CeO 2 based catalysts, observed during isothermal adsorption and in several prototypical catalytic reactions to identify and understand CO adsorption on palladium-ceria based catalysts. Pd-CO is observed via DRIFTS to probe the gas-solid conditions, while ATR-IR is used to probe the affinity of Pd-CO under more complex solvated gas-solid-liquid conditions to discern the influence of the microenvironments for carbonyl adsorption. Here, we explore the presence of Pd-CO under several reactive environments, including CO adsorption, CO 2 + H 2 , CO + H 2 , CH 4 + CO 2 and CO under gas-solid-liquid media, highlighting reactions with notable Pd-CO formation. The differences between palladium carbonyls and carbonate species show that carbonyl species are much more affected via a shifting of the peak position than carbonates, which remain static irrespective of the immediate chemical environment. By following the rate of CO accumulation via K-M mode DRIFTS, we observe migration from linear, 2095 cm -1 , to bridge site, 1978 cm -1 , as a function of time under a static CO atmosphere. With the use of DFT, we discerned changes in Pd-carbonyl stretches due to both coverage effects of CO under simulated reaction conditions and temperature effects. Regardless of whether CO is formed as an intermediate or a reactant, the competitive adsorption of *H and *CO affects the binding strength of *CO at all temperatures, with low temperature favoring atop binding and high temperature favoring the more stable FCC Pd-CO site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Identifying Topological Defects in Lamellar Phases through Contour Analysis of Complex Wave Fields

Lamellar phases frequently contain structural imperfections that significantly affect their behaviors and properties. Our previous research successfully reconstructed real-space configurations of defective lamellar phases from diffuse scattering patterns, indicating the presence of phase vortices as a potential method for identifying topological defects disrupting the smectic ordering. Here, this report presents a mathematical framework using regularized wave fields to represent defective lamellar structures in real space. Phase singularities, resulting from the interference of random waves and indicating lamellar order disruption, are identified through a contour integral. These wave fields, derived from coherent scattering in reciprocal space, were validated via computational benchmarks analyzing small-angle neutron scattering data from AOT surfactant solutions, facilitating further statistical analysis of the defects. Our study highlights the potential to extract meaningful information about topological defects in lyotropic phases by inversely analyzing experimentally measured two-point static correlations. Our method allows for detailed structural analysis of various lyotropic phases, both particulate and nonparticulate, in their quiescent states and facilitates quantitative investigation of defects’ role in phase transitions. By integrating small-angle scattering, deep learning, and vortex tangle analysis, our comprehensive approach shows promise in addressing complex challenges in the structural analysis of soft matter systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Can Dithiolate Ligands Report Electronic Communication in Transuranium Complexes?

The actinide elements, and in particular the transuranic elements, are some of the least studied elements on the periodic table. The degree of covalent bonding between the actinide elements and ligands in is not well understood. Dithiolene/dithiolate ligands provided a revolution in understanding the bonding in transition metals through the geometric differences the ligands exhibit when interacting with electron deficient or abundant metal centers. To test if dithiolene/dithiolate ligands can be utilized to provide an analogous understanding of transuranic element bonding, density functional theory calculations have been performed on U, Np, and Pu complexes of the formula Cp 2 AnS 2 C 2 H 2 . These calculations show that the dithiolate maintains its non-innocent redox active nature when bonding with actinides. In stark contrast with the transition metals, the direction of electron donation is reversed, in the actinide series the direction of electron flow in high fold cases is from the metal center to the ligand. In conclusion, this suggests the communication is between the π* system of the ligand interacting with the f orbitals of the metal center.

Prange, Micah P. [Pacific Northwest National Labor↗
DOE OSTI2026

Oxidative Cascade Cyclization of 1,2-Dicyanoarenes by a Dicopper(I,I) Nitrite Complex to Phthalimide Ligands

The reactions of [Cu2(μ–κ 1:κ 1 -O2N)­DPFN]­[NTf2] (1; DPFN = 2,7-bis­(fluoro-di­(2-pyridyl)­methyl)-1,8-naphthyridine, NTf2 – = N­(SO2CF3)2 –) with 1,4-dicyanobenzene and 1,2-dicyanoarenes are discussed. Treatment of 1 with 1,4-dicyanobenzene produces a tetra-Cu­(I) terephthalate complex (2) and dinitrogen via a discrete CN triple bond cleavage at each cyano group. However, reactions of 1 with 1,2-dicyanoarenes appear to proceed via a cascade reaction involving two intertwined CN triple bond activations to yield a series of di-Cu­(I) phthalimides, [Cu2(μ–N­(CO)2(Ar))­DPFN]­[NTf2] (3-(Ar); Ar = 1,2-arylenes C6H4, 3-NO2C6H3, 4-NO2C6H3, 4-PrOC6H3, 3-NC5H3) and dinitrogen. The dicopper phthalimide bonding interaction in these compounds is robust enough to resist protonation by pentafluorophenol and alkylation by methyl triflate or benzyl chloride at the imide nitrogen. This characteristic presents an opportunity for postsynthetic modifications of the phthalimide ligand. Nevertheless, treatment of 3-(C 6 H 4 ) with bistriflimidic acid (HNTf2) results in release of the neutral phthalimide, making the dicopper core available to coordinate other ligands such as nitrite and thus, completing a stoichiometric cycle.

Fernandez, Jose Martinez↗
DOE OSTI2025

Hygroscopic Metal-Complex Coated Metal Foam for Moisture Management

Moisture management for improving indoor air quality is critical for health and thermal comfort. Recently, the use of desiccant-coated heat exchangers (HXs) has emerged as a promising dehumidification approach to reduce energy consumption as compared with conventional vapor compression-based air dehumidification. The desiccant material is a key component of dehumidification performance. However, currently used desiccant materials have a low moisture uptake capability and require a high temperature for regeneration. The current study investigated the dehumidification performance of a metal-complex-based hygroscopic desiccant-coated metal foam HX. Furthermore, the results revealed that the desiccant-coated foams display increased hydrophilicity compared with the uncoated metal surfaces. Additionally, the desiccant coating had superior moisture absorption capability of more than 2 g/g desiccant , which is much higher than commonly used zeolite and silica gels. Wind tunnel experiments showed that the coating absorbs moisture from humid air and can be effectively regenerated at low temperatures. Additionally, the coating did not increase the pressure drop of the HX. Overall, the results of this study suggest that this desiccant-coated metal form can potentially be used for moisture management in the building sector.

Atmospheric chemistry↗
DOE OSTI2024

Complex Phase Transitions of Fully Rigid Sphere–Rod Amphiphiles Induced by Solvent Polarity in Dilute Solutions

Here we report complex macrophase and microphase transitions of rigid amphiphiles with spherical Keggin molecular clusters as the solvophilic block and rod-like rigid oligofluorene (OF) as the solvophobic block in mixed solvents of water and polar organic solvent. By properly adjusting the solvent polarity, the amphiphiles are found to respond accordingly by self-assembling into multilayered incomplete onion-like structures (10–25 vol % THF), single-layered vesicular structures (60 vol % THF), and an unexpected macrophase separation in the middle (40–50 vol % THF), which is due to the anomalous trends in Keggin solubility as a result of the nature of TBA + counterions. The rigidity of the OF block prevents the amphiphile from assembling by following the rule of packing parameters; instead, interdigitation among different rods leads to the formation of the solvophobic domain to achieve self-assembly. The incomplete onion structures are controlled by the interdigitation of rigid rods for the number of layers and the electrostatic interaction among Keggin head groups for the interlayer distance. When the degree of interdigitation becomes lower, the self-assembly process shows a trend that can be explained by the traditional rule of packing parameter. This study demonstrates the formation of different self-assembled structures by rigid amphiphiles and their transitions induced by solvent composition. The self-assembly (microphase separation) of rigid amphiphiles in a dilute solution could indeed represent a broad area containing complicated, uncharted rules.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dimolybdenum Paddlewheel Complexes with Cation Binding Sites as Electrolyte Additives to Manipulate the Solid-Electrolyte Interphase at Lithium Metal Anodes

The use of electrolyte additives at millimolar loadings to control the surface chemistry of lithium metal anodes (LMAs) is a leading strategy to improve lithium metal batteries and promote electrosynthetic reactions. Whereas previous studies employed either inorganic or organic additives, in this study, we report the first organometallic additive, Mo 2 (mea) 4 [1, mea = 2-(2-methoxyethoxy)acetate], a dimolybdenum paddlewheel complex that is stable under Li plating conditions and features cation binding sites in the second coordination sphere that promote reversible Li + coordination. Binding of Li + ions to 1 induces immobilization of cationically charged aggregates (or products thereof) into the solid electrolyte interphase (SEI), imparting multiple beneficial functions. The modified SEI was found to protect the LMA against parasitic side reactions, produce modest but measurable improvements to Li plating properties (e.g., overpotential, surface structure, and Coulombic efficiency), and improve interfacial charge transport properties. Furthermore, the most notable benefit to battery cycling performance appears in calendar aging tests, which show that the presence of the additive protects the LMA from parasitic side reactions that would otherwise decrease overall cell cycling efficiency over time. Collectively, these data disclose a tactic for designing electrolyte additives using principles of organometallic synthesis.

Additives↗
DOE OSTI2025

3D Printing of Polyelectrolyte Complex-Integrated Photocurable Hydrogel Resins

In this study, we developed a photocurable hydrogel resin incorporating a polyelectrolyte complex (PEC) for 3D printing. Acrylamide-based monomers were formulated with varying PEC contents (0–15 wt %) in an aqueous KBr medium to fabricate patterned porous hydrogel structures. The morphology of printed hydrogels was characterized by field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. Notably, the PEC5 and PEC10 formulations exhibited optimal thermal stability and compressive properties, attributed to the homogeneous distribution of PEC domains within the hydrogel matrix. Furthermore, dye adsorption experiments demonstrated excellent removal efficiency, highlighting the potential of PEC-containing hydrogels for environmental remediation applications, particularly in the treatment of dye-contaminated wastewater.

Yang, Jinchul [University of Tennesse Knoxville]↗
DOE OSTI2025

Enhanced Electrocatalytic and Selective CO 2 -to-CO Reduction by a Rhenium(I) Complex Bearing 6,6′-Substituted 2,2′-Bipyridines

The electrochemical reduction of CO 2 (CO 2 RR) into value-added chemicals offers a promising route toward a circular carbon economy and reduced reliance on fossil fuels. A detailed understanding of the structural and electronic factors governing the performance of molecular CO 2 RR electrocatalysts is essential for the design of efficient, tunable systems. Here, in this study, we report a series of rhenium(I) complexes, fac-[Re I (6,6′-(R) 2 -bpy)(CO) 3 Cl] (bpy = 2,2′-bipyridine; R = mesityl (mes), 2,4,6-triisopropylphenyl (trip), or isophthalic acid (phth)) and evaluate their electrocatalytic activity. Among these, fac-[Re I (6,6′-(mes) 2 -bpy)(CO) 3 Cl] exhibited the highest performance, enabling selective CO 2 -to-CO conversion for 1 hour with Faradaic efficiency (FE) > 97%, representing an unprecedented activity level for a Re-bpy catalysts. Single-crystal X-ray diffraction and density functional theory (DFT) calculations indicated that favorable CO 2 binding could be promoted by the tilting of the 6,6′-(mes)2-bpy ligand (from the Re-CO coordination plane), providing mechanistic insight into the observed enhancement. The study consequently demonstrates a rational correlation between the CO 2 electrocatalytic performance of Re-bpy catalysts and their structural variations, as derived from X-ray data and corroborated by computational modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hydride and Seek: Comparing Crystallographic Hydride Placement Techniques with an Open-Shell Cobalt Complex

Locating hydrides is crucial in organometallic chemistry but difficult to do accurately using X-ray diffraction. Electron diffraction has been proposed as a way to overcome this problem but has not been systematically compared to neutron diffraction and to quantum crystallography (Hirshfeld atom refinement, HAR) to test this hypothesis. Here, we present a comparative analysis of methods for a terminal cobalt hydride complex by comparing a single-crystal neutron diffraction reference structure to results from single-crystal X-ray diffraction with and without Hirshfeld atom refinement (HAR, NoSpherA2), density functional theory (DFT), and electron diffraction (3D-ED/MicroED) refined under kinematical and dynamical formalisms. Conventional X-ray diffraction gives lower precision than neutron diffraction as expected. Despite expected improvements, HAR gives systematic deviation from the neutron benchmark. Interestingly, optimized DFT equilibrium geometries are closer to the neutron value than the value from HAR. On the other hand, electron diffraction with a high-quality data set coupled with dynamical refinement localizes the hydride in difference maps and gives excellent agreement with the neutron data. Dynamical refinement is crucial, as kinematical refinement does not allow assignment of a hydride peak. This cross-modal comparison defines the conditions under which 3D-ED/MicroED delivers high-precision metal–hydride distances for this open-shell cobalt hydride.

anions↗
DOE OSTI2024

Sintering Mechanism of Pt/Al 2 O 3 in Complex Emission Gases Elucidated via In Situ Environmental STEM

Emission control catalysts are crucial for protecting human health by preventing the release of harmful gases and unburnt fuel into the atmosphere. These catalysts often face deactivation through sintering processes in high-temperature, chemically reactive environments containing multiple gas species. Here, we use in situ environmental scanning transmission electron microscopy to monitor the sintering behavior and transient morphologies of Pt/Al 2 O 3 in various relevant gas environments through controlled experiments. Our results reveal the particle migration and atomic ripening behavior of Pt/Al 2 O 3 at the atomic scale in the presence of water vapor and oxygen, which differs from behaviors observed in single gas environments. We identify an atomic ripening mechanism involving the dissociation and migration of Pt adatom chains from Pt nanoparticles, observed only in combinational gases. Finally, these findings provide valuable insights into catalyst degradation behavior in complex gas environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗