Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Interaction between Al and atomic layer deposited (ALD) ZrN under high-energy heavy ion irradiation

Uranium-molybdenum (U-Mo) particles dispersed in an aluminum matrix is the most promising candidate fuel to convert high-power research and test reactors in Europe from using high-enriched to using low-enriched fuel. However, chemical interaction between the U-Mo and the Al matrix leads to undesirable fuel behavior. Zirconium nitride (ZrN) is used as a diffusion barrier between the U-Mo fuel particles and the Al matrix. To understand the potential microstructural evolution of ZrN during irradiation, a high-energy heavy ion (84 MeV Xe) irradiation experiment was performed on atomic layer deposited (ALD) nanocrystalline ZrN deposited on an Al plate. A fluence of 1.86 x 10 17 ions/cm 2 , or 90.3 dpa was reached during this experiment. Both analytic transmission electron microscopy (TEM) and synchrotron microbeam X-ray diffraction (ARD) techniques were utilized to investigate the kinetics of radiation-induced grain growth of ZrN at various radiation doses based on the Williamson-Hall analyses. The grain growth kinetics can be described by a power law expression, D n - D$n\atop{0}$ = K phi, with n = 5.1. The Al-ZrN interaction products (Al 3 Zr and AIN) created by radiation-induced ballistic mixing/radiation-enhanced diffusion and their corresponding formation mechanism were determined from electron diffraction and elemental composition analysis. These experimental results were confirmed by first principle thermodynamic density functional theory (DFT) calculations. The results from this ion irradiation study were also compared to in-pile irradiation data from physical vapor deposited (PVD) ZrN samples for a comprehensive evaluation of the interaction between Al and ZrN and its influence on diffusion barrier performance.

36 MATERIALS SCIENCE↗

Co-processing catalytic fast pyrolysis oil in an FCC reactor

Here, studies of co-processing catalytic fast pyrolysis (CFP) oil with vacuum gas oil (VGO) are conducted in a Davison Circulating Riser (DCR). The CFP oil (CFPO) for this study was produced by upgrading fast-pyrolysis vapors from pine in an ex-situ fixed-bed reactor. CFPOs were co-processed at up to a volume fraction of 0.05 with VGO at 521 degrees C and 257 kPa. The yields of oil, aqueous phase, tail gas, and coke were measured. The amount of coke was determined from the carbon containing components in the regenerator flue gas. A compositional analysis was conducted with gas chromatography and elemental analyzers. The organic liquids were distilled into gasoline, jet-fuel, diesel, and resid fractions. A biocarbon analysis was conducted on the organic phase and its individual boiling-point fractions. The results show a small decrease in liquid yield and a generally increased gas yield when co-processing CFPO with VGO. The experiments showed that 75%-100% of biocarbon is incorporated into liquid fuels relative to fossil carbon, depending on catalyst and CFPO. The measurements indicate that cracked CFPO components are predominantly included in the jet-fuel and diesel fractions. A techno-economic analysis (TEA) estimated the minimum fuel selling price (MSFP) for fuel-range products derived from FCC co-processing of CFPO at 24 to 29 $\$$/GJ ($\$$2.90 to $\$$3.50 per gasoline-gallon equivalent; GGE) at a yield of 4.87-7.14 GJ/t(biomass) or 40-58 GGE/t.

09 BIOMASS FUELS↗

Hemicellulose characterization of deuterated switchgrass

This paper describes the structural characterization of hemicellulose isolated from hydroponically grown switchgrass in H 2 O medium (protiated) or 50% D 2 O medium (deuterated) through compositional analysis, GPC, FTIR, 13 C and 1 H/ 13 C HSQC NMR. 4-O-methyl glucuronoarabinoxylan (GAX), the major hemicellulose in switchgrass isolated from deuterated switchgrass, had structural properties similar to hemicellulose isolated from protiated switchgrass. Both had comparable arabinose to xylose ratio (0.25) and molecular weight (47–50 kDa). Finally, structural similarities show that deuterated switchgrass hemicellulose can be used as a model carbohydrate polymer in neutron scattering, or pharmaceutical studies due to their immunomodulatory activity and gastroprotective effects.

59 BASIC BIOLOGICAL SCIENCES↗

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗

Adaptive Breast Radiation Therapy Using Modeling of Tissue Mechanics: A Breast Tissue Segmentation Study

Purpose: To validate and compare the accuracy of breast tissue segmentation methods applied to computed tomography (CT) scans used for radiation therapy planning and to study the effect of tissue distribution on the segmentation accuracy for the purpose of developing models for use in adaptive breast radiation therapy. Methods and Materials: Twenty-four patients receiving postlumpectomy radiation therapy for breast cancer underwent CT imaging in prone and supine positions. The whole-breast clinical target volume was outlined. Clinical target volumes were segmented into fibroglandular and fatty tissue using the following algorithms: physical density thresholding; interactive thresholding; fuzzy c-means with 3 classes (FCM3) and 4 classes (FCM4); and k-means. The segmentation algorithms were evaluated in 2 stages: first, an approach based on the assumption that the breast composition should be the same in both prone and supine position; and second, comparison of segmentation with tissue outlines from 3 experts using the Dice similarity coefficient (DSC). Breast datasets were grouped into nonsparse and sparse fibroglandular tissue distributions according to expert assessment and used to assess the accuracy of the segmentation methods and the agreement between experts. Results: Prone and supine breast composition analysis showed differences between the methods. Validation against expert outlines found significant differences (P<.001) between FCM3 and FCM4. Fuzzy c-means with 3 classes generated segmentation results (mean DSC = 0.70) closest to the experts' outlines. There was good agreement (mean DSC = 0.85) among experts for breast tissue outlining. Segmentation accuracy and expert agreement was significantly higher (P<.005) in the nonsparse group than in the sparse group. Conclusions: The FCM3 gave the most accurate segmentation of breast tissues on CT data and could therefore be used in adaptive radiation therapy-based on tissue modeling. Breast tissue segmentation methods should be used with caution in patients with sparse fibroglandular tissue distribution.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New Technique for Developing a Proton Range Compensator With Use of a 3-Dimensional Printer

Purpose: A new system for manufacturing a proton range compensator (RC) was developed by using a 3-dimensional printer (3DP). The physical accuracy and dosimetric characteristics of the new RC manufactured by 3DP (RC{sub 3}DP) were compared with those of a conventional RC (RC{sub C}MM) manufactured by a computerized milling machine (CMM). Methods and Materials: An RC for brain tumor treatment with a scattered proton beam was calculated with a treatment planning system, and the resulting data were converted into a new format for 3DP using in-house software. The RC{sub 3}DP was printed with ultraviolet curable acrylic plastic, and an RC{sub C}MM was milled into polymethylmethacrylate using a CMM. The inner shape of both RCs was scanned by using a 3D scanner and compared with TPS data by applying composite analysis (CA; with 1-mm depth difference and 1 mm distance-to-agreement criteria) to verify their geometric accuracy. The position and distal penumbra of distal dose falloff at the central axis and field width of the dose profile at the midline depth of spread-out Bragg peak were measured for the 2 RCs to evaluate their dosimetric characteristics. Both RCs were imaged on a computed tomography scanner to evaluate uniformity of internal density. The manufacturing times for both RCs were compared to evaluate the production efficiency. Results: The pass rates for the CA test were 99.5% and 92.5% for RC{sub 3}DP and RC{sub C}MM, respectively. There was no significant difference in dosimetric characteristics and uniformity of internal density between the 2 RCs. The net fabrication times of RC{sub 3}DP and RC{sub C}MM were about 18 and 3 hours, respectively. Conclusions: The physical accuracy and dosimetric characteristics of RC{sub 3}DP were comparable with those of the conventional RC{sub C}MM, and significant system minimization was provided.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Intrinsic Bulk Quantum Oscillations in a Bulk Unconventional Insulator SmB 6

The finding of bulk quantum oscillations in the Kondo insulator SmB 6 proved a considerable surprise. Subsequent measurements of bulk quantum oscillations in other correlated insulators including YbB 12 lent support to our discovery of a class of bulk unconventional insulators that host bulk quantum oscillations. Here we perform a series of experiments to examine evidence for the intrinsic character of bulk quantum oscillations in floating zone-grown single crystals of SmB 6 that have been the subject of our quantum oscillation studies. We present results of thermodynamic, transport, and composition analysis experiments on pristine floating zone-grown single crystals of SmB 6 and compare quantum oscillations with metallic LaB 6 and elemental aluminum. These results establish the intrinsic origin of quantum oscillations from the insulating bulk of floating zone-grown SmB 6 . The similarity of the Fermi surface in insulating SmB 6 with the conduction-electron Fermi surface in metallic hexaborides is at the heart of a theoretical mystery.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatially limited antiferromagnetic order in a cluster glass compound Tb2Ni0.90Si2.94

In the present study, the synthesis of a new ternary intermetallic compound Tb2Ni0:90Si2:94 has been reported. The detailed studies on structure, static and dynamical magnetic properties of the compound have been investigated by means of powder x-ray diffraction, compositional analysis, dc & ac magnetization, non-equilibrium dynamics, heat capacity and neutron diffraction measurements. The dc & ac magnetic susceptibility reveal that the compound undergoes spin cluster-glass behaviour below 9.9 K. The frequency dependence of the freezing temperature have been analyzed on the basis of dynamic scaling laws such as power-law divergence and Vogel-Fulcher law, which further con rm the cluster-glass state formation for the compound. A detailed study on non-equilibrium dynamical behaviour associated with cluster-glass state has been carried out through magnetic relaxation behaviour along with magnetic memory effect in zero-field-cooled (ZFC) as well as field-cooled (FC) conditions and associated aging effect. The zero-field neutron diffraction study reveals the presence of a spatially limited antiferromagnetic phase in addition to the magnetically frustrated cluster-glass state. This result has also been supported through zero-field heat capacity studies. The variation in local electronic environment among the magnetic rare- earth ions caused by the structural disorder associated with Ni/Si ions have been argued to be responsible for the coexistence of different magnetic phases.

36 MATERIALS SCIENCE↗

H 2 O-assisted O 2 reduction by H 2 on Pt and PtAu bimetallic nanoparticles: Influences of composition and reactant coverages on kinetic regimes, rates, and selectivities

Hydrogen peroxide (H 2 O 2 ) can replace hazardous oxidants in industrial processes but is currently too expensive for many such applications. While direct synthesis of H 2 O 2 (H 2 + O 2 → H 2 O 2 ) may reduce costs in comparison to incumbent technology, current catalysts lack the requisite stability and selectivity. Here, we examine the direct synthesis of H 2 O 2 on bimetallic Pt 1 Au x (0 ≤ x ≤ 230) and Pt catalysts at steady-state in pure water and relate kinetic parameters for H 2 O 2 and H 2 O formation to possible active site structures informed by complementary characterization methods. X-ray photoelectron spectra show significant Pt surface enrichment compared to the bulk composition. Analysis of infrared spectra of mixed monolayers of 12 CO* and 13 CO* indicate that Pt and Au form substitutional surface alloys. The Pt 1 Au x nanoparticles with the greatest mole fractions of Au predominantly expose Pt monomers (i.e., isolated Pt atoms), yet Pt atoms exposed upon all these nanoparticles possess electronic structures distinct from bulk Pt. Despite these differences, rate measurements are consistent with product formation through proton-electron transfer pathways for all Pt 1 Au x catalysts. In situ XAS indicate that Pt remains metallic during H 2 O 2 synthesis. Under the most oxidizing conditions, selectivities toward H 2 O 2 increase strongly with the Au to Pt ratio from 2% for monometallic Pt to 85% for Pt 1 Au 170 . However, selectivities are similar among all catalysts within reducing conditions. Comparisons of apparent activation enthalpies for the formation of H 2 O 2 and H 2 O across these catalysts and the range of conditions suggest that Pt monomers within Au provide the greatest selectivities for H 2 O 2 formation, because these active sites present high barriers for O-O bond rupture. Further, selectivities decrease with increasing ratios of H 2 to O 2 pressures, because Pt atoms aggregate and form oligomers that readily dissociate dioxygen intermediates. The combined use of spectroscopy, kinetics, and concepts employed in reaching these conclusions take inspiration from the legacy of Prof. Michel Boudart, and specifically his elegant methods for interrogating bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure of the Irradiated U3Si2/Al Silicide Dispersion Fuel

The silicide dispersion fuel of U3Si2/Al is recognized as the best performance fuel for many nuclear research and test reactors with up to 4.8 gU/cm3 for low-enriched uranium fuel (LEU, 235U < 20%). An irradiated U3Si2/Al dispersion fuel (235U {approx}75%) from the high flux side of a fuel plate (U0R040) from the Reduced Enrichment for Research and Test Reactors (RERTR)-8 test was characterized using transmission electron microscopy (TEM). The fuel was irradiated in the Advanced Test Reactor (ATR) for 105 days. The average irradiation temperature and fission density of the U3Si2 fuel particles for the TEM sample are estimated to be approximately 110 C and 5.4 x 1027 f/m3. The characterization was performed using a 200 kV TEM. Detailed microstructural information along with composition analysis is obtained. The results and their implication on the performance of the U3Si2/Al silicide dispersion fuel are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An examination of the precipitation behavior of proton irradiated dual phase 308L weldment filler materials

Voids, G phase particles, and Ni-Si rich clusters in proton irradiated dual phase 308L groove filler of a SA508–304 L dissimilar metal weldment are analyzed using advanced characterization techniques. These weldments are often used in light water nuclear reactors and are subject to enhanced corrosion and associated stress corrosion cracking (SCC). Radiation damage is known to accelerate SCC. Ni-Si enriched clusters were observed in proton irradiated γ austenite, while G phase M 6 Ni 16 Si 7 (where M transition metal element) precipitates were observed in proton irradiated δ ferrite. Compositional analysis of the G phase precipitates and Ni-Si clusters from STEM-EDS and APT are compared. Unlike G phase particles in proton irradiated δ ferrite, Ni-Si clusters in proton irradiated γ austenite are not rich in Mn. Both STEM-EDS and APT line-scan profiles of the Ni-Si clusters show that the Fe and Cr concentration gradient between matrix γ austenite and the Ni-Si clusters is not as sharp as those between matrix δ ferrite and G phase. Further, HR-STEM imaging indicates that the lattice parameter of the Ni-Si clusters is commensurate with γ austenite and the clusters do not represent the precipitation of a second phase. Finally, our analysis demonstrates the density and volume fraction of G phase particles and the density of voids scales with proton irradiation damage and the energy to recoils.

308L groove filler↗

Radiative transition probabilities of neutral and singly ionized Europium estimated by laser-induced breakdown spectroscopy (LIBS)

Laser-induced breakdown spectroscopy (LIBS) is a versatile technique for compositional analysis for solids, liquids, or gasses. LIBS is an asset for the quantitative or qualitative analysis of resource limited materials like actinides and rare earths because it is quasi-nondestructive. Two Eu 2 O 3 pellets were synthesized to be a test and validation set, respectively. Spectral lines identified from the National Institute of Standards and Technology database with fundamental data reported were used to form Saha-Boltzmann plots. The Saha-Boltzmann plots were used to determine the plasma temperatures and electron densities of the laser-induced plasmas for both samples. These Saha-Boltzmann plots were then used to calculate previously unreported transition probabilities associated with identified peaks. Additionally, the transition probabilities presented in this paper provide the capability for calibration free LIBS to be performed more readily on europium samples and the spectroscopic analysis of stellar bodies. Eight previously unreported transition probabilities are presented in this paper; five for Eu I and three for Eu II. The transition probabilities for Eu I ranged from 0.172 to 7.38 × 10 7 s -1 and those for Eu II ranged from 1.56 to 6.75 × 10 7 s -1 .

47 OTHER INSTRUMENTATION↗

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu-Ag) core-shell powders. - Graphical abstract: Mechanism of fabricating Cu-Ag particles with good dispersibility using {beta}-CDs as a protective agent was studied because of its special structure. Highlights: > Green supramolecular {beta}-CD used as a protective agent and ascorbic acid(Vc) as a reducing agent to fabricate Cu-Ag powders. > Particles are monodisperse and the diameter is close to nanoscale(100-150 nm). > Resistance of Cu particles to oxidation was higher. > Formation mechanism explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic H{sub 2} production from spinels ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) solid solutions

Solid solutions of ZnGa{sub 2−x}Cr{sub x}O{sub 4} (0≤x≤2) were successfully prepared by solid state reactions. Introducing Cr into ZnGa{sub 2}O{sub 4} crystal structure significantly improves its light absorption and greatly enhances its photocatalytic activity. An optimized Cr content (x=1.5 for ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4}) was found for the solid solutions with the highest photocatalytic hydrogen production rate (~775 μmol/h). Compositional analysis suggests there is a strong enrichment of Cr at the surface of sample ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} compared with other samples. Theoretical calculations suggest their electronic structures involve spin-polarized conduction band (CB) and valence band (VB) that are mainly composed of Cr 3d orbitals. The highest photocatalytic activity observed in ZnGa{sub 0.5}Cr{sub 1.5}O{sub 4} is probably due to the higher Cr content at the surface that favors the Cr 3d orbital overlapping. - Graphical abstract: Electronic structure and density of states of ZnGa{sub 2}O{sub 4} after partially substituting Ga with Cr. - Highlights: • Complete solid solution can be formed between ZnGa{sub 2}O{sub 4} and ZnCr{sub 2}O{sub 4}. • Optical properties and catalytic activity are improved by adding Cr into ZnGa{sub 2}O{sub 4}. • An optimized Cr content exists for the highest activity. • Enrichment of Cr in the surface is beneficial for a better performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation in TiAl alloys

Deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation in high Nb containing TiAl alloys was investigated using high-resolution transmission electron microscopy (HREM) and energy dispersive X-ray spectroscopy (EDS). The dislocations appearing at the tip of deformation-induced {gamma} plate (DI-{gamma}) and the stacking sequence change of the {alpha}{sub 2} matrix were two key evidences for determining the occurrence of the deformation-induced {alpha}{sub 2} {yields} {gamma} phase transformation. Compositional analysis revealed that the product phase of the room-temperature transformation was not standard {gamma} phase; on the contrary, the product phase of the high-temperature transformation was standard {gamma} phase.

36 MATERIALS SCIENCE↗

On the formation of Al{sub 3}Ni{sub 2} intermetallic compound by aluminothermic reduction of nickel oxide

Simultaneous reduction of NiO and formation of Al{sub 3}Ni{sub 2} intermetallic compound at 880, 940 and 1000 deg. C were investigated by means of the thermal reduction method. The optimal Ni contents for the starting samples were determined at different times and temperatures through the compositional analysis. The microstructure of the metallic quenched samples was observed by scanning electron microscope. Moreover, the X-ray diffraction analysis and energy disperse spectrometry were applied to characterize the formation of the phases. The results showed that the metallic samples consisted of Al{sub 3}Ni{sub 2}, Al{sub 3}Ni and Al phases and that there was no trace of Ni, NiO and Al{sub 2}O{sub 3}. It was found that after 10 min at the applied temperatures, the reaction completed. For the longer time, the dispersed Al{sub 3}Ni{sub 2} nuclei were grown and its continuous network formed. By increasing the temperature, the thickness of the Al{sub 3}Ni precipitation around Al{sub 3}Ni{sub 2} phase is enhanced in the samples with the same Ni content. A model was proposed for these reactions. - Research Highlights: {yields} Simultaneous reduction of NiO, and Al{sub 3}Ni{sub 2} intermetallics formation at temperatures lower than Ni melting point. {yields} Presently a mechanism for such a process. {yields} Parametric study of microstructure and formed phases.

36 MATERIALS SCIENCE↗

Direct visualization of β phase causing intergranular forms of corrosion in Al–Mg alloys

For a more effective examination of microstructure in Al–Mg alloys, a new etching solution has been developed; dissolved ammonium persulfate in water. It is demonstrated how β phase (Al{sub 3}Mg{sub 2}) in Al–Mg alloys respond to this solution using samples of a binary Al–Mg alloy and a commercial 5083 aluminum alloy. Nanometer sized β phase is clearly visualized for the first time using scanning electron microscopy (SEM) instead of transmission electron microscopy (TEM). It is anticipated that direct and unambiguous visualization of β phase will greatly augment intergranular corrosion research in 5xxx series aluminum alloys. - Highlights: • Nanometer sized β phase in Al-10% Mg is first clearly visualized with SEM. • Nanometer sized β phase in wrought alloy 5083 is first clearly visualized with SEM. • Grain boundary decorating β phase and isolated sponge-like β phase are shown. • This phase is confirmed to be β phase using composition analysis.

36 MATERIALS SCIENCE↗

Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys

Dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys has been investigated to identify the relationship between the microstructure of the welds and the resultant mechanical and weldability characteristics. γ′-Strengthened nickel-base Alloy 500 and γ″-strengthened nickel-base Alloy 718 were used for dissimilar welding. Gas tungsten arc welding operations were utilized for performing the autogenous dissimilar welding. Alloy 500 and Alloy 718 base metals showed various types of phases, carbides, intermetallics and eutectics in their microstructure. The results for Alloy 500 weld metal showed severe segregation of titanium to the interdendritic regions. The Alloy 718 weld metal compositional analysis confirmed the substantial role of Nb in the formation of low-melting eutectic-type morphologies which can reduce the weldability. The microstructure of dissimilar weld metal with dilution level of 65% wt.% displayed semi-developed dendritic structure. The less segregation and less formation of low-melting eutectic structures caused to less susceptibility of the dissimilar weld metal to the solidification cracking. This result was confirmed by analytic modeling achievements. Dissolution of γ″-Ni{sub 3}Nb precipitations took place in the Alloy 718 heat-affected zone leading to sharp decline of the microhardness in this region. Remelted and resolidified regions were observed in the partially-melted zone of Alloy 500 and Alloy 718. Nevertheless, no solidification and liquation cracking happened in the dissimilar welds. Finally, this was concluded that dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys can successfully be performed. - Highlights: • Dissimilar welding of γ′- and γ″-strengthened nickel-base superalloys is studied. • Microstructural, mechanical and weldability aspects of the welds are assessed. • Microstructure of welds, bases and heat-affected zones is characterized in detail. • The type, morphology and distribution of the phases are thoroughly investigated. • Dissimilar welding is successfully performed without occurrence of any hot cracks.

36 MATERIALS SCIENCE↗