Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistent scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Impact of vertical and seasonal variation in leaf traits on simulating soybean canopy photosynthesis via 1D and 3D modeling

Accurate modeling of photosynthesis is crucial for predicting crop productivity and quantifying the carbon cycle in agroecosystems. Leaf traits are essential inputs for modeling canopy photosynthesis. Yet, many existing models still use fixed plant functional type (PTF)-based values to parameterize leaf traits under a big-leaf or two-big-leaf assumption, neglecting their vertical profiles and seasonal changes. This simplification may introduce significant uncertainties in estimating gross primary productivity (GPP). In this study, we simulated soybean GPP and tested the effects of vertical and seasonal variation in three key leaf photosynthetic traits: the maximum carboxylation rate at 25 °C (Vcmax 25 ), leaf chlorophyll content (LCC), and leaf mass per area (LMA) in the 1D-SCOPE and 3D-Helios models. Weekly field measurements were conducted during the growing season of 2024 to support the simulation. We designed ten leaf trait parameterization schemes by incorporating different combinations of vertical profiles and seasonal changes, while assuming homogeneous canopy architecture in both models. Our results revealed that Vcmax 25 vertical and seasonal variation had the strongest influence on simulated GPP in both 1D and 3D models, while LCC and LMA effects were minimal. Particularly, the scheme with an empirically parameterized Vcmax 25 profile achieved comparable performance to the scheme with the measured Vcmax 25 profile. Both 1D-SCOPE and 3D-Helios accurately modeled GPP (SCOPE: R 2 = 0.87, Bias = 0.55 µmol m⁻² s⁻¹; Helios: R 2 = 0.9, Bias = 0.22 µmol m⁻² s⁻¹) under the most complex scheme, and their responses to vertical and seasonal variation in leaf traits were consistent, demonstrating the robustness of our findings. Based on our findings, we propose a scalable framework for parameterizing leaf traits to improve GPP simulations. This study contributes to improving the representation of leaf trait dynamics in canopy-level photosynthesis models, potentially enhancing our ability to predict crop productivity and understand agroecosystem carbon dynamics.

54 ENVIRONMENTAL SCIENCES↗

Rapid Multiscale Computational Screening for OLED Host Materials

The design of new host materials for phosphorescent OLEDs is challenging because several physical property requirements must be met simultaneously. A triplet energy (E T ) higher than that of the chosen emitting dopant, appropriate HOMO/LUMO energy levels, good charge carrier transport, and high stability are all required. Here, computational methods were used to screen structures to find the most promising candidates for OLED hosts. The screening was carried out in three Tiers. The Tier 1 selection, based on Density Functional Theory calculations identified a set of eight molecular structures with E T > 2.9 eV, suitable for hosting blue phosphorescent dopants such as iridium(III)bis((4,6-di-fluorophenyl)-pyridinato-N,C2’)picolinate (FIrpic). Phenanthro[9,10 d]imidazole was chosen as the starting point for the Tier 2 selection. Thirty seven unique molecular structures were enumerated by isoelectronic nitrogen transmutation of up to two CH fragments of the phenanthrene. Three molecules, i.e. imidazo[4,5 f] phenanthrolines with nitrogens at the 1,10 , 3,8 and 4,7 positions, were selected for Tier 3, which involved the use of molecular dynamics simulations and electron coupling calculations to predict differences in charge transport between the three materials. The three were explored experimentally through synthesis and device fabrication. The singlet, triplet, and frontier orbital energies computed using single molecule DFT calculations (tiers 1 and 2) were consistent with the experimental values in fluid solution, and the multi scale modeling scheme (tier 3) correctly predicted the poor device performance of one material. Here, we conclude that screening host materials using only single molecule quantum mechanical data was not sufficient to predict whether a given material would make a good OLED host with certainty, however they can be used to screen out materials that are destined to fail due to low singlet/triplet energies or a poor match of the frontier orbital energies to the dopant or transport materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PERFORMANCE STUDY OF LIQUID NITROGEN THERMO-SIPHON COOLING LOOP

A RF-superconducting linear accelerator (LINAC) booster for the existing 15 UD Pelletron accelerator is presently under construction at Inter-University Accelerator Centre in New Delhi, India. The LINAC will make use of superconducting niobium quarter-wave resonators (QWR) as the accelerating element, and will consist of three accelerating cryomodules. A gravity-assisted (thermo-siphon) flow scheme with liquid nitrogen has been proposed to cool the thermal radiation shields of the LINAC cryomodules. A small test rig of the thermo-siphon loop has been developed to simulate and investigate the chosen aspects of the proposed configuration. The experimental work has been focused on the thermal performances of the specially designed copper clamps and optimization of the system engineering parameters. The paper presents the results of the thermo-siphon measurements and the qualitative description of the investigated phenomena.

42 ENGINEERING↗

Evanescent waves propagation along a periodically corrugated surface and their amplification by relativistic electron beam (quasi-optical theory)

By using a quasi-optical approach, we study propagation of evanescent waves along a periodically corrugated surface and their excitation by relativistic electron beams. Under assumption of a shallow (in the scale of period) corrugation, the dispersion equation for normal waves is derived and two particular cases are studied. In the first case, the wave frequency is far from the Bragg resonance; therefore, the evanescent wave propagation can be described by using the impedance approximation with deceleration of the zeroth spatial harmonic. The second case takes place at the frequencies close to the Bragg resonance. There, the field can be represented as two counter-propagating quasi-optical wave beams, which are coupled on the corrugated surface and form an evanescent normal wave. With regard to the interaction with an electron beam, the first case corresponds to the convective instability that can be used for amplification of radiation, while the second case corresponds to the absolute instability used in surface-wave oscillators. This paper is focused on studying main features of amplifier schemes, such as the increments, electron efficiency, and formation of a self-consistent spatial structure of the radiated field. For practical applications, the feasibility of realization of relativistic surface-wave amplifiers in the submillimeter wavelength range is estimated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

OPTICAL AND NEAR-INFRARED SPECTROSCOPY OF THE L SUBDWARF SDSS J125637.13-022452.4

Red optical and near-infrared spectroscopy are presented for SDSS J125637.13-022452.4, one of only four L subdwarfs reported to date. These data confirm the low-temperature, metal-poor nature of this source, as indicated by prominent metal-hydride bands, alkali lines, and collision-induced H{sub 2} absorption. The optical and near-infrared spectra of SDSS J1256-0224 are similar to those of the sdL4 2MASS J16262034+3925190, and we derive a classification of sdL3.5 based on the preliminary scheme of Burgasser, Cruz, and Kirkpatrick. The kinematics of SDSS J1256-0224 are consistent with membership in the Galactic inner halo, with estimated UVW space velocities indicating a slightly prograde, eccentric, and inclined Galactic orbit (3.5 {approx}< R {approx}< 11 kpc; |Z {sub max}| = 7.5 kpc). Comparison to synthetic spectra computed with the PHOENIX code, including the recent implementation of kinetic condensate formation (DRIFT-PHOENIX), indicates T {sub eff} {approx} 2100-2500 K and [M/H] {approx} -1.5 to -1.0 for log g {approx} 5.0-5.5 (cgs), although there are clear discrepancies between model and observed spectra particularly in the red optical region. As such, any conclusions on the role of metallicity in condensate grain and cloud formation are probably premature. Indeed, a shift in the temperature scale of L subdwarfs relative to L dwarfs may obviate the need for modified condensate and grain chemistry in low metallicity atmospheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas

JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ferrite-Free Circulator for Precise Measurements of SRF Cavities with High Q-Factor

In this work, we suggest and investigate new magnetless circulators based on three resonators connected in a loop and parametrically modulated in time with mutual phase lag. The first design consists of three Fano resonators with a spectrally asymmetric response, in contrast to schemes based on the Lorentz resonators explored thus far. The second design includes three Fano-Lorentz resonators, i.e., it also possesses spatial asymmetry. We demonstrate that the asymmetric approach provides strong and reversible isolation for the practically feasible modulation amplitude and rate. The results of our work are promising for precise measurements of superconducting radio frequency cavities with high Q-factor.

43 PARTICLE ACCELERATORS↗

Isospin Mixing in Nuclei Around N ~ Z and the Superallowed Beta Decay

Theoretical approaches that use one-body densities as dynamical variables, such as Hartree-Fock or the density functional theory (DFT), break isospin symmetry both explicitly, by virtue of charge-dependent interactions, and spontaneously. To restore the spontaneously broken isospin symmetry, we implemented the isospin-projection scheme on top of the Skyrme-DFT approach. This development allows for consistent treatment of isospin mixing in both ground and excited nuclear states. In this study, we apply this method to evaluate the isospin impurities in ground states of even-even and odd-odd N ~ Z nuclei. By including simultaneous isospin and angular-momentum projection, we compute the isospin-breaking corrections to the 0^{+} -> 0^{+} superallowed beta decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

X-Ray Absorption Spectroscopic And Theoretical Studies on (L)(2)[Cu-2(S-2)N](2+) Complexes: Disulfide Versus Disulfide(Center Dot 1-) Bonding

Cu K-, Cu L-, and S K-edge X-ray absorption spectroscopic (XAS) data have been combined with density functional theory (DFT) calculations on [{l_brace}(TMPA)Cu{r_brace}{sub 2}S{sub 2}](ClO{sub 4}){sub 2} (1), [{l_brace}Cu[HB(3,5-Pr{sub 2}{sup i}pz){sub 3}]{r_brace}{sub 2}(S{sub 2})] (2), and [{l_brace}(TMEDA)Cu{r_brace}{sub 2}(S{sub 2}){sub 2}](OTf){sub 2} (3) to obtain a quantitative description of their ground state wavefunctions. The Cu L-edge intensities give 63 and 37% Cu d-character in the ground state of 1 and 2, respectively, whereas the S K-pre-edge intensities reflect 20 and 48% S character in their ground states, respetively. These data indicate a more than 2-fold increase in the total disulfide bonding character in 2 relative to 1. The increase in the number of Cu?S bonds in 2 ({mu}-{eta}{sup 2}:{eta}{sup 2} S{sub 2}{sup 2-} bridge) compared to 1 ({mu}-{eta}{sup 1}:{eta}{sup 1} S{sub 2}{sup 2-} bridge) dominantly determines the large increase in covalency and Cu-disulfide bond strength in 2. Cu K- and L- and S K-pre-edge energy positions directly demonstrate the Cu{sup II}/(S{sub 2}{sup -}){sub 2} nature of 3. The two disulfide({center_dot}1?)'s in 3 undergo strong bonding interactions that destabilize the resultant filled antibonding {pi}* orbitals of the (S{sub 2}{sup -}){sub 2} fragment relative to the Cu 3d levels. This leads to an inverted bonding scheme in 3 with dominantly ligand-based holes in its ground state, consistent with its description as a dicopper(II)-bis-disulfide({center_dot}1?) complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consistent Fluid Property Evaluation in RELAP5-3D

Previous investigations have developed and tested a methodology to improve the consistency between used to determine the fluid property derivatives used in the numerical solution scheme and the solution scheme itself. Within a bounding rectangle of the fluid property table for a fluid state point, linear interpolants for both fluid property values and their derivatives are calculated. A weighted average between these interpolants the analytical approximations of the fluid properties and derivatives is formed with a weighting factor between 0.0 and 1.0. This average has shown potential to reduce mass error relating to the fluid properties in RELAP5-3D. This linear interpolation and weighted averaging methodology has been implemented in RELAP5-3D with two additional options that adjust the weighting factor in the average according to the location within the bounding rectangle. The first calculates the weighting factor based only on the position between the left and right internal energy endpoints. The second also factors the position between the upper and lower pressure grid points into the calculation of the weighting factor. The new coding passes verification testing and expanded testing of the various options. Graphs are presented from three kinds of test cases, a two volume basic model, Edward’s O’Brien blowdown, and typical PWR. Some trends of the effect of crossing fluid property table pressure and internal energy grid line are identified and discussed for the simple and Edwards test cases. Preliminary results show that it the consistent fluid methodology can reduce mass error in simple cases, but in more complex input models, there is no clear best.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Non-empirical pairing energy functional in nuclear matter and finite nuclei

We study {sup 1}S{sub 0} pairing gaps in neutron and nuclear matter as well as T=1 pairing in finite nuclei on the basis of microscopic two-nucleon interactions. Special attention is paid to the consistency of the pairing interaction and normal self-energy contributions. We find that pairing gaps obtained from low-momentum interactions depend only weakly on approximation schemes for the normal self-energy, required in present energy-density functional calculations, while pairing gaps from hard potentials are very sensitive to the effective-mass approximation scheme.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hamiltonian kinetic-Hall magnetohydrodynamics with fluid and kinetic ions in the current and pressure coupling schemes

We present two generalized hybrid kinetic-Hall magnetohydrodynamics (MHD) models describing the interaction of a two-fluid bulk plasma, which consists of thermal ions and electrons, with energetic, suprathermal ion populations described by Vlasov dynamics. The dynamics of the thermal components are governed by standard fluid equations in the Hall MHD limit with the electron momentum equation providing an Ohm's law with Hall and electron pressure terms involving a gyrotropic electron pressure tensor. The coupling of the bulk, low-energy plasma with the energetic particle dynamics is accomplished through the current density (current coupling scheme; CCS) and the ion pressure tensor appearing in the momentum equation (pressure coupling scheme; PCS) in the first and the second model, respectively. The CCS is a generalization of two well-known models, because in the limit of vanishing energetic and thermal ion densities, we recover the standard Hall MHD and the hybrid kinetic-ions/fluid-electron model, respectively. This provides us with the capability to study in a continuous manner, the global impact of the energetic particles in a regime extending from vanishing to dominant energetic particle densities. The noncanonical Hamiltonian structures of the CCS and PCS, which can be exploited to study equilibrium and stability properties through the energy-Casimir variational principle, are identified. As a first application here, we derive a generalized Hall MHD Grad–Shafranov–Bernoulli system for translationally symmetric equilibria with anisotropic electron pressure and kinetic effects owing to the presence of energetic particles using the PCS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inversionless amplification in semiconductor nanostructures: A way to create a frequency-tunable laser of far-infrared and terahertz radiation

A scheme of a far-infrared and terahertz amplifier or laser based on a semiconductor nanostructure, consisting of a superlattice of double quantum wells of a certain design placed into a planar metal waveguide and pumped by a CO{sub 2} laser, is suggested. The structure operation is based on the inversionless mechanism of electromagnetic field amplification, which allows passing to room-temperature operation (in the pulsed mode) and significant (by a factor of more than 1.7) variation in the output radiation frequency by simple variation in the pump intensity. A laser based on such a scheme can be a convenient and easily tunable source of infrared and terahertz radiation for both basic research and various applications.

36 MATERIALS SCIENCE↗

THREE-POINT CORRELATION FUNCTIONS OF SDSS GALAXIES: LUMINOSITY AND COLOR DEPENDENCE IN REDSHIFT AND PROJECTED SPACE

The three-point correlation function (3PCF) provides an important view into the clustering of galaxies that is not available to its lower order cousin, the two-point correlation function (2PCF). Higher order statistics, such as the 3PCF, are necessary to probe the non-Gaussian structure and shape information expected in these distributions. We measure the clustering of spectroscopic galaxies in the Main Galaxy Sample of the Sloan Digital Sky Survey, focusing on the shape or configuration dependence of the reduced 3PCF in both redshift and projected space. This work constitutes the largest number of galaxies ever used to investigate the reduced 3PCF, using over 220,000 galaxies in three volume-limited samples. We find significant configuration dependence of the reduced 3PCF at 3-27 h{sup -1} Mpc, in agreement with {Lambda}CDM predictions and in disagreement with the hierarchical ansatz. Below 6 h{sup -1} Mpc, the redshift space reduced 3PCF shows a smaller amplitude and weak configuration dependence in comparison with projected measurements suggesting that redshift distortions, and not galaxy bias, can make the reduced 3PCF appear consistent with the hierarchical ansatz. The reduced 3PCF shows a weaker dependence on luminosity than the 2PCF, with no significant dependence on scales above 9 h{sup -1} Mpc. On scales less than 9 h{sup -1} Mpc, the reduced 3PCF appears more affected by galaxy color than luminosity. We demonstrate the extreme sensitivity of the 3PCF to systematic effects such as sky completeness and binning scheme, along with the difficulty of resolving the errors. Some comparable analyses make assumptions that do not consistently account for these effects.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum motion on a torus as a submanifold problem in a generalized Dirac’s theory of second-class constraints

A generalization of Dirac’s canonical quantization scheme for a system with second-class constraints is proposed, in which the fundamental commutation relations are constituted by all commutators between positions, momenta and Hamiltonian, so they are simultaneously quantized in a self-consistent manner, rather than by those between merely positions and momenta which leads to ambiguous forms of the Hamiltonian and the momenta. The application of the generalized scheme to the quantum motion on a torus leads to a remarkable result: the quantum theory is inconsistent if built up in an intrinsic geometric manner, whereas it becomes consistent within an extrinsic examination of the torus as a submanifold in three dimensional flat space with the use of the Cartesian coordinate system. The geometric momentum and potential are then reasonably reproduced. -- Highlights: •A generalization of Dirac’s canonical quantization is proposed for a system with second-class constraints. •Quantum motion on torus surface is explicitly treated to show how Schrödinger formalism is complementary to the Dirac one. •The embedding effect in quantum mechanics is originated from the quantization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A SECOND-ORDER DIVERGENCE-CONSTRAINED MULTIDIMENSIONAL NUMERICAL SCHEME FOR RELATIVISTIC TWO-FLUID ELECTRODYNAMICS

A new multidimensional simulation code for relativistic two-fluid electrodynamics (RTFED) is described. The basic equations consist of the full set of Maxwell’s equations coupled with relativistic hydrodynamic equations for separate two charged fluids, representing the dynamics of either an electron–positron or an electron–proton plasma. It can be recognized as an extension of conventional relativistic magnetohydrodynamics (RMHD). Finite resistivity may be introduced as a friction between the two species, which reduces to resistive RMHD in the long wavelength limit without suffering from a singularity at infinite conductivity. A numerical scheme based on HLL (Harten–Lax–Van Leer) Riemann solver is proposed that exactly preserves the two divergence constraints for Maxwell’s equations simultaneously. Several benchmark problems demonstrate that it is capable of describing RMHD shocks/discontinuities at long wavelength limit, as well as dispersive characteristics due to the two-fluid effect appearing at small scales. This shows that the RTFED model is a promising tool for high energy astrophysics application.

79 ASTRONOMY AND ASTROPHYSICS↗

GPU-accelerated kinetic Hall thruster simulations in WarpX

Abstract Two-dimensional (axial-azimuthal) simulations of a Hall thruster are performed using the open-source particle-in-cell code WarpX. The simulation conditions are chosen to match those of the axial-azimuthal benchmark first reported by Charoy et al. in 2019. A range of numerical and solver parameters is investigated in order to find those which yield the best performance. It is found that WarpX completes the benchmark case in 3.8 days on an Nvidia V100 GPU, and in as low as 1.5 days on a more recent Nvidia H100 GPU. Of the numerical parameters investigated, it is determined that the field-solve tolerance and particle resampling thresholds have the largest effect on the simulation wall time and that particle resampling may artificially widen electron velocity distribution functions, leading to unphysical heating. A semi-implicit scheme for the electrostatic field solve is tested and is found to produce results consistent to within 10% of the benchmark in less than twelve hours. The scaling properties of the electrostatic solver to multiple GPUs are also assessed on a uniform plasma test problem. The results of this work are discussed in the context of advancements in GPU hardware and the suitability of kinetic Hall thruster simulations for engineering applications.

Marks, Thomas A.↗

FSISPH: An SPH formulation for impacts between dissimilar materials

Here, we present an SPH formulation with several new features designed to better model the fully-compressible interaction of dissimilar materials. We developed the new method to simulate the atmospheric entry and break-up of small celestial bodies in planetary atmospheres. The formulation uses a unity-based, density-energy discretization of the hydrodynamic conservation laws with linear-corrected kernel gradients. To account for variations in compressibility, we use an HLLC approximate Riemann solver to adjust the velocity gradient at material interfaces. To handle large transverse velocity discontinuities, we introduce a simple slip interface model that limits the artificial viscosity at material interfaces. Diffusion is optionally applied through the velocity gradient and this allows the density and specific thermal energy to evolve in a manner more consistent with the first law of thermodynamics in comparison to other more direct diffusion schemes. We also introduce a material-local second-order artificial conduction scheme used to smooth the specific thermal energy field. Material damage fits neatly under this framework by treating the damage front as a material interface. The method has been implemented as a solver, FSISPH, within the code, Spheral++, and is publicly available on github. We test our new solver on a number of classic shock, mixing, and multi-material problem. The components we outline can significantly improve accuracy of SPH for problems with sharp contact discontinuities.

79 ASTRONOMY AND ASTROPHYSICS↗