Search NASA⌕ Search

SEARCH · Search NASA

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Chromospheric Evaporation and Decimetric Radio Emission in Solar Flares

We have discovered decimetric signatures of the chromospheric evaporation process. Evidence for the radio detection of chromospheric evaporation is based on the radio-inferred values of (1) the electron density, (2) the propagation speed, and (3) the timing, which are found to be in good agreement with statistical values inferred from the blueshifted Ca xix soft X-ray line. The physical basis of our model is that free-free absorption of plasma emission is strongly modified by the steep density gradient and the large temperature increase in the upflowing flare plasma. The steplike density increase at the chromospheric evaporation front causes a local discontinuity in the plasma frequency, manifested as almost infinite drift rate in decimetric type III bursts. The large temperature increase of the upflowing plasma considerably reduces the local free-free opacity (due to the T-(exp -3/2) dependence) and thus enhances the brightness of radio bursts emitted at the local plasma frequency near the chromospheric evaporation front, while a high-frequency cutoff is expected in the high-density regions behind the front, which can be used to infer the velocity of the upflowing plasma. From model calculations we find strong evidence that decimetric bursts with a slowly drifting high-frequency cutoff are produced by fundamental plasma emission, contrary to the widespread belief that decimetric bursts are preferentially emitted at the harmonic plasma level. We analyzed 21 flare episodes from 1991-1993 for which broadband (100-3000 MHz) radio dynamic spectra from Phoenix, hard X-ray data from BATSE/CGRO, and soft X-ray data from GOES were available. We detected slowly drifting high-frequency cutoffs between 1.1 and 3.0 GHz, with drift rates of -41 +/- 32 MHz/s, extending over time intervals of 24 +/- 23 s. Developing a density model for type III-emitting flare loops based on the statistically observed drift rate of type III bursts by Alvarez & Haddock, we infer velocities of up to 360 km/s for the upflowing plasma, with an average of v(sub CE) = 236 +/- 130 km /s for episodes with 5-15 s duration. The mean electron density of the upflowing plasma is n(sub e) = 5.2(+/-3.1) x 10(exp 10) /cu cm when it is first detected in radio, at coronal altitudes of h(sub 0) = 9.2 +/- 2.3 Mm.

Aschwanden, Markus J.↗
NASA NTRS2003

Properties of Minor Ions in the Solar Wind and Implications for the Background Solar Wind Plasma

Ion charge states measured in situ in interplanetary space are formed in the inner coronal regions below 5 solar radii, hence they carry information on the properties of the solar wind plasma in that region. The plasma parameters that are important in the ion forming processes are the electron density, the electron temperature and the flow speeds of the individual ion species. In addition, if the electron distribution function deviates from a Maxwellian already in the inner corona, then the enhanced tail of that distribution function, also called halo, greatly effects the ion composition. The goal of the proposal is to make use of ion fractions observed in situ in the solar wind to learn about both, the plasma conditions in the inner corona and the expansion and ion formation itself. This study is carried out using solar wind models, coronal observations, and ion fraction calculations in conjunction with the in situ observations.

Esser, Ruth↗
NASA NTRS2013

Measuring Temperature-Dependent Propagating Disturbances in Coronal Fan Loops Using Multiple SDO-AIA Channels and Surfing Transform Technique

A set of co-aligned high resolution images from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) is used to investigate propagating disturbances (PDs) in warm fan loops at the periphery of a non-flaring active region NOAA AR 11082. To measure PD speeds at multiple coronal temperatures, a new data analysis methodology is proposed enabling quantitative description of sub visual coronal motions with low signal-to-noise ratios of the order of 0.1. The technique operates with a set of one-dimensional surfing signals extracted from position-timeplots of several AIA channels through a modified version of Radon transform. The signals are used to evaluate a two-dimensional power spectral density distribution in the frequency - velocity space which exhibits a resonance in the presence of quasi-periodic PDs. By applying this analysis to the same fan loop structures observed in several AIA channels, we found that the traveling velocity of PDs increases with the temperature of the coronal plasma following the square root dependence predicted for the slow mode magneto-acoustic wave which seems to be the dominating wave mode in the studied loop structures. This result extends recent observations by Kiddie et al. (2012) to a more general class of fan loop systems not associated with sunspots and demonstrating consistent slow mode activity in up to four AIA channels.

Solar Corona↗
NASA NTRS1984

Plasma and energetic particle structure upstream of a quasi-parallel interplanetary shock

ISEE 1, 2 and 3 data from 1978 on interplanetary magnetic fields, shock waves and particle energetics are examined to characterize a quasi-parallel shock. The intense shock studied exhibited a 640 km/sec velocity. The data covered 1-147 keV protons and electrons and ions with energies exceeding 30 keV in regions both upstream and downstream of the shock, and also the magnitudes of ion-acoustic and MHD waves. The energetic particles and MHD waves began being detected 5 hr before the shock. Intense halo electron fluxes appeared ahead of the shock. A closed magnetic field structure was produced with a front end 700 earth radii from the shock. The energetic protons were cut off from the interior of the magnetic bubble, which contained a markedly increased density of 2-6 keV protons as well as the shock itself.

Kennel, C. F.↗
NASA NTRS1992

Solar wind from a corona with a large helium abundance

The possibility is investigated that the presence of alpha particles in the coronal base region can reduce the sensitivity of the proton mass flux to the base temperature. It is found that for an alpha particle to proton density ratio at the base as small as 10 percent, alpha particles can reduce the sensitivity of the proton mass flux density to variations in the base temperature. The effects of enhanced collisional coupling and of Alfven waves on the flux of protons and alpha particles are studied. As an aid to future observational determination of the alpha particle density in the corona, calculations of the intensities of the resonantly scattered lines He II 304A and H I 1216A for selected models are presented.

Leer, Egil↗
NASA NTRS2017

Thermosphere Global Time Response to Geomagnetic Storms Caused by Coronal Mass Ejections

We investigate, for the first time with a spatial superposed epoch analysis study, the thermosphere global time response to 159 geomagnetic storms caused by coronal mass ejections (CMEs) observed in the solar wind at Earth's orbit during the period of September 2001 to September 2011. The thermosphere neutral mass density is obtained from the CHAMP (CHAllenge Mini-Satellite Payload) and GRACE (Gravity Recovery Climate Experiment) spacecraft. All density measurements are intercalibrated against densities computed by the Jacchia-Bowman 2008 empirical model under the regime of very low geomagnetic activity. We explore both the effects of the pre-CME shock impact on the thermosphere and of the storm main phase onset by taking their times of occurrence as zero epoch times (CME impact and interplanetary magnetic field Bz southward turning) for each storm. We find that the shock impact produces quick and transient responses at the two high-latitude regions with minimal propagation toward lower latitudes. In both cases, thermosphere is heated in very high latitude regions within several minutes. The Bz southward turning of the storm onset has a fast heating manifestation at the two high-latitude regions, and it takes approximately 3 h for that heating to propagate down to equatorial latitudes and to globalize in the thermosphere. This heating propagation is presumably accomplished, at least in part, with traveling atmospheric disturbances and complex meridional wind structures. Current models use longer lag times in computing thermosphere density dynamics during storms. Our results suggest that the thermosphere response time scales are shorter and should be accordingly adjusted in thermospheric empirical models.

mass ejections↗
NASA NTRS2018

Elliptic-Cylindrical Analytical Flux Rope Model for Magnetic Clouds

In this paper, we present the elliptic-cylindrical analytical flux rope model, which constitutes the first level of complexity above that of a circular-cylindrical geometry. The framework of this series of models was established by Nieves-Chinchilla et al. with the circular-cylindrical analytical flux rope model. The model describes the magnetic flux rope topology with distorted cross section as a possible consequence of the flux rope interaction with the solar wind. In this model, for the first time, a flux rope is completely described by a nonorthogonal geometry. The Maxwell equations can be consistently solved using tensorial analysis, and relevant physical quantities can be derived, such as magnetic fluxes, number of turns, or Lorentz force distribution. The model is generalized in termsof the radial dependence of the poloidal and axial current density components. The circular-cylindrical reconstruction technique has been adapted to the new geometry for a specific case of the model and tested againstan interplanetary coronal mass ejection observed by the Wind spacecraft on 2005 June 12. In this specific case,from the comparative analysis between the circular-cylindrical and elliptic-cylindrical models, the inclusion ofthe cross-section distortion in the 3D reconstruction results in significant changes in the derived axis orientation,size, central magnetic field, magnetic fluxes, and force-freeness. The case studied in this paper exemplifies the useof the model and reconstruction technique developed. Furthermore, the novel mathematical formulation to modelflux ropes in heliophysics paves the way to the inclusion of more complex magnetic field configurations.

CMEs↗
NASA NTRS2019

Thermospheric Heating and Cooling Times During Geomagnetic Storms, Including Extreme Events

We present the first quantitative calculations of thermospheric heating and cooling times for geomagnetic storms of different intensity, including extreme events. We utilize the neutral mass density database of the CHAllenging Mini‐satellite Payload and Gravity Recovery And Climate Experiment missions to produce thermospheric global system response to geomagnetic storms caused by coronal mass ejections via superposed epoch analysis during May 2001 to December 2015. Storm events are grouped in five different categories based on the minimum value of the SYM‐H index. We calculate the time from storm onset for the thermosphere to reach maximum intensification (heating time) and the time from onset for the thermosphere to recover (cooling time). We find that heating and cooling times decrease as storm intensity increases and the effect is more pronounced for the cooling times. For extreme storms, the thermospheric heating time is 9.5 hr, while the cooling time is 22 hr.

Zesta, Eftyhia↗
NASA NTRS2019

A Remarkably Narrow RHESSI X-Ray Flare on 2011 September 25

The unusually narrow X-ray source imaged with the Ramaty High Energy Solar Spectroscopic Imager (RHESSI) during an impulsive spike lasting for ~10 s during the Geostationary Operational Environmental Satellite C7.9 flare on 2011 September 25 (SOL2011-09-25T03:32) was only ~2'' wide and ~10'' long. Comparison with Helioseismsic and Magnetic Imager magnetograms and Atmospheric Imaging Assembly images at 1700 Å shows that the X-ray emission was primarily from a long ribbon in the region of positive polarity with little if any emission from the negative polarity ribbon. However, a thermal plasma source density of ~10(exp 12)/cu.cm estimated from the RHESSI-derived emission measure and source area showed that this could best be interpreted as a coronal hard X-ray source in which the accelerated electrons with energies less than ~50 keV were stopped by Coulomb collisions in the corona, thus explaining the lack of the more usual bright X-ray footpoints. Analysis of RHESSI spectra shows greater consistency with a multi-temperature distribution and a low-energy cutoff to the accelerated electron spectrum of 22 keV compared to 12 keV if a single-temperature distribution is assumed. This leads to a change in the lower limit on the total energy in electrons by an order of magnitude, given the steepness of the best-fit electron spectrum with a power-law index of ~6.

Brian Dennis↗
NASA NTRS1973

Theoretical intensity ratios for some Fe XIII coronal lines.

Using cross section values for collisional excitation by protons recently calculated by Landman (1973), theoretical values for the relative intensities of the Fe XIII 10747-, 10798-, and 3388-A lines are determined as functions of electron density. The obtained results are compared with those of Chevalier and Lambert (1969).

Finn, G. D.↗
NASA NTRS2011

The Strength and Radial Profile of the Coronal Magnetic Field from the Standoff Distance of a Coronal Mass Ejection-Driven Shock

We determine the coronal magnetic field strength in the heliocentric distance range 6-23 solar radii (Rs) by measuring the shock standoff distance and the radius of curvature of the flux rope during the 2008 March 25 coronal mass ejection imaged by white-light coronagraphs. Assuming the adiabatic index, we determine the Alfven Mach number, and hence the Alfven speed in the ambient medium using the measured shock speed. By measuring the upstream plasma density using polarization brightness images, we finally get the magnetic field strength upstream of the shock. The estimated magnetic field decreases from approximately 48 mG around 6 Rs to 8 mG at 23 Rs. The radial profile of the magnetic field can be described by a power law in agreement with other estimates at similar heliocentric distances.

heliosphere↗
NASA NTRS1974

Structures in a non-magnetic solar corona

A fluid mechanical convective instability is examined under the conditions found in the solar corona. Linearized density perturbations are shown to grow as they are carried outward by the solar wind. The non-linear instability may be proposed as a cause of coronal structures in nonmagnetic stars, or in regions of the solar corona with weak magnetic fields.

Cross, M. A.↗
NASA NTRS1997

Elemental composition before, during and after the January 6, 1997, CME event measured by CELIAS/SOHO

Using solar wind particle data from the charge, element and isotope analysis system (CELIAS) experiment on the SOHO mission, densities of the elements O, Ne, Mg, Si, S, Ca, and Fe are derived, and their abundance is analyzed before, during and after the 6 Janaury 1997 coronal mass ejection event (CME). In the interstream and coronal hole regions before and after this event, typical solar wind abundances for the elements investigated were found. However, during the passage of the coronal mass ejection and during the passage of the erupted filament, the elemental composition differed markedly from typical solar wind. For the passage of the CME and for the passage of the erupted filament, a mass-dependent enhancement of the elements was found, with a monotonic increase towards heavier elements. Si/O and Fe/O ratios of the order of one during these time periods were observed.

Wurz, P.↗
NASA NTRS2022

The Coronal Veil

Coronal loops, seen in solar coronal images, are believed to represent emission from magneticflux tubes withcompact cross sections. We examine the 3D structure of plasma above an active region in a radiativemagnetohydrodynamic simulation to locate volume counterparts for coronal loops. In many cases, a loop cannot belinked to an individual thin strand in the volume. While many thin loops are present in the synthetic images, thebright structures in the volume are fewer and of complex shape. We demonstrate that this complexity can formimpressions of thin bright loops, even in the absence of thin bright plasma strands. We demonstrate the difficulty ofdiscerning from observations whether a particular loop corresponds to a strand in the volume, or a projectionartifact. We demonstrate how apparently isolated loops could deceive observers, even when observations frommultiple viewing angles are available. While we base our analysis on a simulation, the mainfindings areindependent from a particular simulation setup and illustrate the intrinsic complexity involved in interpretingobservations resulting from line-of-sight integration in an optically thin plasma. We propose alternativeinterpretation for strands seen in Extreme Ultraviolet images of the corona. The“coronal veil”hypothesis ismathematically more generic, and naturally explains properties of loops that are difficult to address otherwise—such as their constant cross section and anomalously high density scale height. We challenge the paradigm ofcoronal loops as thin magneticflux tubes, offering new understanding of solar corona, and by extension, of othermagnetically confined bright hot plasmas

A Malanushenko↗
NASA NTRS1994

Three-dimensional reconstruction of coronal mass ejections

Computer assisted tomography (CAT) techniques are used to reconstruct the three dimensional shape of coronal mass ejections in the interplanetary medium. Both the Helios 2 spacecraft zodiacal-light photometers and the Solwind coronograph measure changes in Thomson scattering of sunlight from electrons. The technique from near-perpendicular Solwind and Helios views are applied to determine the density of a mass ejection which left the solar surface on 24 May 1979. The coronograph and the Helios perspective views are not simultaneous; the Solwind observations extend outward to sky plane distances of only 10 of the solar radius, whereas the Helios 16 photometer observes to as close as 17 of the solar radius from the sun. The solution is obtained by assuming outward radial expansion and that the coronal mass ejections (CME's) have the same speed everywhere at the same height. The analyses show that CME's are extensive three dimensional structures (the CME of 24 May appears approximately shell) like in three dimensions.

Jackson, Bernard V.↗
NASA NTRS1974

Luminosity conditions of Cr IX and Fe XI in the corona

Coronal lines of wavelength 4566 A Cr IX and wavelength 3986 A Fe XI were studied. The electron temperature in the corona was found along with the electron density, and calculations were performed for Cr IX ion populations of levels. The lines were scanned photometrically within the limits of altitudes of 48,000-110,000 km.

Alikayeva, K. V.↗
NASA NTRS1997

Comprehensive Analyses of Data Collected from TEREK (Solar EUV Telescope) RES-C (Solar X-Ray Spectrometer) and SORS (Solar Radio Spectrometer) on board CORONAS-1 Using Magnetohydrodynamic Models

By using the observed magnetic field data obtained from the Wilcox Solar Observatory at Stanford University as the inputs to a two-dimensional plane-of-sky magnetohydrodynamic model, via numerical relaxation method, we have deduced the plasma and magnetic field parameters for the observed coronal hole by CORONAS-1. The method for this self-consistent MHD analysis will be discussed in detail. Numerical results for the magnetic field configuration, velocity distribution, density and temperature distributions will be presented. We have converted the computed density to polarization brightness in order to directly compare the MHD outputs with observations. Also included is a summary of achievements made during the grant period. This section is summarized into three categories: 1) Visit of Co-Investigators; 2) Presentations; and 3) Papers published, accepted and submitted for publication in journals.

Wu, S. T.↗