Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

I-BIEM, an iterative boundary integral equation method for computer solutions of current distribution problems with complex boundaries: A new algorithm. I - Theoretical

A new algorithm for an iterative computation of solutions of Laplace's or Poisson's equations in two dimensions, using Green's second identity, is presented. This algorithm converges strongly and geometrically and can be applied to curved, irregular, or moving boundaries with nonlinear and/or discontinuous boundary conditions. It has been implemented in Pascal on a number of micro- and minicomputers and applied to several geometries. Cases with known analytic solutions have been tested. Convergence to within 0.1 percent to 0.01 percent of the theoretical values are obtained in a few minutes on a microcomputer.

Cahan, B. D.↗
NASA NTRS1984

Initial experience with distributing structural calculations among computers operating in parallel

An existing program is currently being adapted to perform finite element analysis by distributing substructures over a network of four Apple IIe microcomputers connected to a shared disk. In this network, one microcomputer controls the entire process while the others perform the analysis on each substructure in parallel. This substructure analysis is used in an iterative, fully stressed, structural resizing procedure. This procedure allows experimentatation with resizing in which all analyses are not completed during a single iteration. This research gives some insight on how to configure multidiscriplinary analysis and optimization procedures for decomposable engineering systems using either high performance engineering workstations or a parallel processor supercomputer. In addition, the operational experience gained facilitates the implementation of analysis programs on these new computers when they become available in an engineering environment.

Rogers, J. L., Jr.↗
NASA NTRS1998

Calculation of Multistage Turbomachinery Using Steady Characteristic Boundary Conditions

A multiblock Navier-Stokes analysis code for turbomachinery has been modified to allow analysis of multistage turbomachines. A steady averaging-plane approach was used to pass information between blade rows. Characteristic boundary conditions written in terms of perturbations about the mean flow from the neighboring blade row were used to allow close spacing between the blade rows without forcing the flow to be axisymmetric. In this report the multiblock code is described briefly and the characteristic boundary conditions and the averaging-plane implementation are described in detail. Two approaches for averaging the flow properties are also described. A two-dimensional turbine stator case was used to compare the characteristic boundary conditions with standard axisymmetric boundary conditions. Differences were apparent but small in this low-speed case. The two-stage fuel turbine used on the space shuttle main engines was then analyzed using a three-dimensional averaging-plane approach. Computed surface pressure distributions on the stator blades and endwalls and computed distributions of blade surface heat transfer coefficient on three blades showed very good agreement with experimental data from two tests.

Chima, Rodrick V.↗
NASA NTRS1994

Techniques and Tools for Performance Tuning of Parallel and Distributed Scientific Applications

Performance degradation in scientific computing on parallel and distributed computer systems can be caused by numerous factors. In this half-day tutorial we explain what are the important methodological issues involved in obtaining codes that have good performance potential. Then we discuss what are the possible obstacles in realizing that potential on contemporary hardware platforms, and give an overview of the software tools currently available for identifying the performance bottlenecks. Finally, some realistic examples are used to illustrate the actual use and utility of such tools.

Sarukkai, Sekhar R.↗
NASA NTRS1977

Approximations to microwave attenuation in precipitation

A three-term approximation and a discrete drop-size distribution have been used to obtain an analytical expression for the microwave attenuation coefficient for precipitation. Results compared to an exact calculation using the same drop size distribution showed a relative difference of 50% or less over a broad range of rainrates (5-150 mm/hr) and wavelengths (2-5 cm). Since the use of a discrete drop-size distribution is computationally complex, the exponential size distribution formulated by Marshall and Palmer (1948) was studied. This distribution resulted in an overprediction of the attenuation coefficient of as much as 100% at a 2 cm wavelength and a 150 mm/hr rainrate, although the prediction was much closer at lower rainrates and different wavelengths.

Kalshoven, J. E., Jr.↗
NASA NTRS1983

Partitioning of large space structures vibration control computations

The vibration control of large space structures is studied. It is found to be computationally demanding. Distribution of the vibration control computations among central and local processors can significantly reduce the throughput required from the central processor and may also result in improved performance due to reduced transport lag.

Kernan, J.↗
NASA NTRS1977

A general method for calculating three-dimensional compressible laminar and turbulent boundary layers on arbitrary wings

The method described utilizes a nonorthogonal coordinate system for boundary-layer calculations. It includes a geometry program that represents the wing analytically, and a velocity program that computes the external velocity components from a given experimental pressure distribution when the external velocity distribution is not computed theoretically. The boundary layer method is general, however, and can also be used for an external velocity distribution computed theoretically. Several test cases were computed by this method and the results were checked with other numerical calculations and with experiments when available. A typical computation time (CPU) on an IBM 370/165 computer for one surface of a wing which roughly consist of 30 spanwise stations and 25 streamwise stations, with 30 points across the boundary layer is less than 30 seconds for an incompressible flow and a little more for a compressible flow.

Cebeci, T.↗
NASA NTRS1978

A distributed vortex method for computing the vortex field of a missile

Vortex sheet development in the flow field of a missile was investigated by approximating the sheets in the cross-flow plane with short straight-line segments having distributed vorticity. In contrast with the method that represents the sheets as lines of discrete vortices, this distributed vortex method produced calculations with a high degree of computational stability.

Barger, R. L.↗
NASA NTRS1973

A modified Monte Carlo model for the ionospheric heating rates.

A Monte Carlo method is adopted as a basis for the derivation of the photoelectron-heat input into the ionospheric plasma. Since a great number of Monte Carlo runs are required normally for the computation of the heating rates, this approach is modified in an attempt to minimize the computation time. The heat-input distributions are computed for arbitrarily small source elements that are spaced apart at distances corresponding to the photoelectron dissipation range. By means of a nonlinear interpolation procedure their individual heating-rate distributions are utilized to produce synthetic ones that fill the gaps between the Monte Carlo generated distributions. By varying these gaps and the corresponding number of Monte Carlo runs the accuracy of the results is tested to verify the validity of this procedure. It is concluded that this model can reduce the computation time by as much as an order of magnitude, thus improving the feasibility of including Monte Carlo calculations in self-consistent ionosphere models.

Mayr, H. G.↗
NASA NTRS2006

Loci-STREAM Version 0.9

Loci-STREAM is an evolving computational fluid dynamics (CFD) software tool for simulating possibly chemically reacting, possibly unsteady flows in diverse settings, including rocket engines, turbomachines, oil refineries, etc. Loci-STREAM implements a pressure- based flow-solving algorithm that utilizes unstructured grids. (The benefit of low memory usage by pressure-based algorithms is well recognized by experts in the field.) The algorithm is robust for flows at all speeds from zero to hypersonic. The flexibility of arbitrary polyhedral grids enables accurate, efficient simulation of flows in complex geometries, including those of plume-impingement problems. The present version - Loci-STREAM version 0.9 - includes an interface with the Portable, Extensible Toolkit for Scientific Computation (PETSc) library for access to enhanced linear-equation-solving programs therein that accelerate convergence toward a solution. The name "Loci" reflects the creation of this software within the Loci computational framework, which was developed at Mississippi State University for the primary purpose of simplifying the writing of complex multidisciplinary application programs to run in distributed-memory computing environments including clusters of personal computers. Loci has been designed to relieve application programmers of the details of programming for distributed-memory computers.

Wright, Jeffrey↗
NASA NTRS2005

Distributing Data from Desktop to Hand-Held Computers

A system of server and client software formats and redistributes data from commercially available desktop to commercially available hand-held computers via both wired and wireless networks. This software is an inexpensive means of enabling engineers and technicians to gain access to current sensor data while working in locations in which such data would otherwise be inaccessible. The sensor data are first gathered by a data-acquisition server computer, then transmitted via a wired network to a data-distribution computer that executes the server portion of the present software. Data in all sensor channels -- both raw sensor outputs in millivolt units and results of conversion to engineering units -- are made available for distribution. Selected subsets of the data are transmitted to each hand-held computer via the wired and then a wireless network. The selection of the subsets and the choice of the sequences and formats for displaying the data is made by means of a user interface generated by the client portion of the software. The data displayed on the screens of hand-held units can be updated at rates from 1 to

Elmore, Jason L.↗
NASA NTRS1995

Parallel Navier-Stokes computations on shared and distributed memory architectures

We study a high order finite difference scheme to solve the time accurate flow field of a jet using the compressible Navier-Stokes equations. As part of our ongoing efforts, we have implemented our numerical model on three parallel computing platforms to study the computational, communication, and scalability characteristics. The platforms chosen for this study are a cluster of workstations connected through fast networks (the LACE experimental testbed at NASA Lewis), a shared memory multiprocessor (the Cray YMP), and a distributed memory multiprocessor (the IBM SPI). Our focus in this study is on the LACE testbed. We present some results for the Cray YMP and the IBM SP1 mainly for comparison purposes. On the LACE testbed, we study: (1) the communication characteristics of Ethernet, FDDI, and the ALLNODE networks and (2) the overheads induced by the PVM message passing library used for parallelizing the application. We demonstrate that clustering of workstations is effective and has the potential to be computationally competitive with supercomputers at a fraction of the cost.

Hayder, M. Ehtesham↗
NASA NTRS1991

An efficient massively parallel Euler solver for unstructured grids

A data parallel mesh-vertex upwind finite-volume scheme for solving the Euler equations on triangular unstructured meshes is described. A novel vertex-based partitioning of the problem is introduced which minimizes the computation and communication costs associated with distributing the computation to the processors of a massively parallel computer. Finally, the performance of this unstructured computation on 8K processors of the Connection Machine CM-2 is compared with one processor of a Cray-YMP. The experiments show that 8K processors of the CM-2 achieve approximately 70 percent of the performance of one processor of the Cray-YMP on the unstructured mesh computations described here.

Hammond, Steven W.↗
NASA NTRS1992

Advanced techniques in reliability model representation and solution

The current tendency of flight control system designs is towards increased integration of applications and increased distribution of computational elements. The reliability analysis of such systems is difficult because subsystem interactions are increasingly interdependent. Researchers at NASA Langley Research Center have been working for several years to extend the capability of Markov modeling techniques to address these problems. This effort has been focused in the areas of increased model abstraction and increased computational capability. The reliability model generator (RMG) is a software tool that uses as input a graphical object-oriented block diagram of the system. RMG uses a failure-effects algorithm to produce the reliability model from the graphical description. The ASSURE software tool is a parallel processing program that uses the semi-Markov unreliability range evaluator (SURE) solution technique and the abstract semi-Markov specification interface to the SURE tool (ASSIST) modeling language. A failure modes-effects simulation is used by ASSURE. These tools were used to analyze a significant portion of a complex flight control system. The successful combination of the power of graphical representation, automated model generation, and parallel computation leads to the conclusion that distributed fault-tolerant system architectures can now be analyzed.

Palumbo, Daniel L.↗
NASA NTRS2000

Perspectives on the Future of CFD

This viewgraph presentation gives an overview of the future of computational fluid dynamics (CFD), which in the past has pioneered the field of flow simulation. Over time CFD has progressed as computing power. Numerical methods have been advanced as CPU and memory capacity increases. Complex configurations are routinely computed now and direct numerical simulations (DNS) and large eddy simulations (LES) are used to study turbulence. As the computing resources changed to parallel and distributed platforms, computer science aspects such as scalability (algorithmic and implementation) and portability and transparent codings have advanced. Examples of potential future (or current) challenges include risk assessment, limitations of the heuristic model, and the development of CFD and information technology (IT) tools.

Kwak, Dochan↗