Search NASA⌕ Search

SEARCH · Search NASA

Results for “divided differences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Experimental and Numerical Characterization of a Steady-State Cylindrical Blackbody Cavity at 1100 Degrees Celsius

A blackbody calibration furnace at the NASA Dryden Flight Research Center is used to calibrate heat flux gages. These gages are for measuring the aerodynamic heat flux on hypersonic flight vehicle surfaces. The blackbody is a graphite tube with a midplane partition which divides the tube into two compartments (dual cavities). Electrical resistance heating is used to heat the graphite tube. This heating and the boundary conditions imposed on the graphite tube result in temperature gradients along the walls of the blackbody cavity. This paper describes measurements made during steady-state operation and development of finite-difference thermal models of the blockbody furnace at 1100 C. Two configurations were studied, one with the blackbody outer surface insulated and the other without insulation. The dominant modes of heat transfer were identified for each configuration and the effect of variations in material properties and electric current that was passed through the blackbody were quantified.

Horn, Thomas J.↗
NASA NTRS2001

Longtime Durability of PMR-15 Matrix Polymer at 204, 260, 288, and 316 C

Isothermal weight loss studies at the Glenn (Lewis) Research Center were conducted at four temperatures (204, 260, 288, and 316 C) with specimens of varied geometric shapes to investigate the mechanisms involved in the thermal degradation of PMR-15. Both neat resin behavior and composite behaviors were studied. Two points of interest in these studies are the role(s) of oxygen in the mechanisms involved in the thermo-oxidative degradation of these composite materials and the dimensional changes that occur during their useable lifetime. Specimen dimensional changes and surface layer growth were measured and recorded. It was shown that physical and chemical changes take place as a function of time and location in PMR-15 neat resin and composites as aging takes place in air at elevated temperatures. These changes initiate at the outer surfaces of both materials and progress inward following the oxygen as it proceeds by diffusion into the central core of each material. Microstructural changes cause changes in density, material shrinkage (strains), glass transition temperature, dimension, dynamic shear modulus, and compression properties. These changes also occur slowly dividing the polymer material into two distinct parts: a visibly undamaged core section between two visibly damaged surface layers. The surface layer has a significant effect on compression properties of thinner specimens, but the visibly undamaged core material controls these properties for specimens having eight or more plies. It was demonstrated that there are three different mechanisms involved in the degradation of PMR-15 during aging at elevated temperatures. These are a weight gain, a small weight fraction bulk material weight loss, and a large mass fraction weight loss concentrated at the surface of the polymer or composite. At the higher temperatures (260 C and above), the surface loss predominates. Below 260 C, the surface loss and the bulk core loss become more equivalent. Between 175 and 260 C, the initial weight change is due to a weight gain mechanism with a visible lifetime that diminishes as the aging temperature increases.

Bowles, Kenneth J.↗
NASA NTRS2006

Spatial Correlation Function of the Chandra Selected Active Galactic Nuclei

We present the spatial correlation function analysis of non-stellar X-ray point sources in the Chandra Large Area Synoptic X-ray Survey of Lockman Hole Northwest (CLASXS). Our 9 ACIS-I fields cover a contiguous solid angle of 0.4 deg(exp 2) and reach a depth of 3 x 10(exp -15) erg/square cm/s in the 2-8 keV band. We supplement our analysis with data from the Chandra Deep Field North (CDFN). The addition of this field allows better probe of the correlation function at small scales. A total of 233 and 252 sources with spectroscopic information are used in the study of the CLASXS and CDFN fields respectively. We calculate both redshift-space and projected correlation functions in co-moving coordinates, averaged over the redshift range of 0.1 < z < 3.0, for both CLASXS and CDFN fields for a standard cosmology with Omega(sub Lambda) = 0.73,Omega(sub M) = 0.27, and h = 0.71 (H(sub 0) = 100h km/s Mpc(exp -1). The correlation function for the CLASXS field over scales of 3 Mpc< s < 200 Mpc can be modeled as a power-law of the form xi(s) = (S/SO)(exp - gamma), with gamma = 1.6(sup +0.4 sub -0.3) and S(sub o) = 8.0(sup +.14 sub -1.5) Mpc. The redshift-space correlation function for CDFN on scales of 1 Mpc< s < 100 Mpc is found to have a similar correlation length so = 8.55(sup +0.74 sub -0.74) Mpc, but a shallower slope (gamma = 1.3 +/- 0.1). The real-space correlation functions derived from the projected correlation functions, are found to be tau(sub 0 = 8.1(sup +1.2 sub -2.2) Mpc, and gamma = 2.1 +/- 0.5 for the CLASXS field, and tau(sub 0) = 5.8(sup +.1.0 sub -1.5) Mpc, gamma = 1.38(sup +0.12 sub -0.14 for the CDFN field. By comparing the real- and redshift-space correlation functions in the combined CLASXS and CDFN samples, we are able to estimate the redshift distortion parameter Beta = 0.4 +/- 0.2 at an effective redshift z = 0.94. We compare the correlation functions for hard and soft spectra sources in the CLASXS field and find no significant difference between the two groups. We have also found that the correlation between X-ray luminosity and clustering amplitude is weak, which, however, is fully consistent with the expectation using the simplest relations between X-ray luminosity, black hole mass, and dark halo mass. We study the evolution of the AGN clustering by dividing the samples into 4 redshift bins over 0.1 Mpc< z <3.0 Mpc. We find a very mild evolution in the clustering amplitude, which show the same evolution trend found in optically selected quasars in the 2dF survey. We estimate the evolution of the bias, and find that the bias increases rapidly with redshift (b(z = 0.45) = 0.95 +/- 0.15 and b(z = 2.07) = 3.03 +/- 0.83): The typical mass of the dark matter halo derived from the bias estimates show little change with redshift. The average halo mass is found to be log (M(sub halo)/M(sun))approximates 12.1. Subject headings: cosmology: observations - large-scale structure of the universe - x-rays: diffuse background - galaxies: nuclei

Yang, Y.↗
NASA NTRS2010

An Overview of High-Resolution, Non-Dispersive, Imaging Spectrometers for High-Energy Photons

High-resolution x-ray spectroscopy has become a powerful tool for studying the evolving universe. The grating spectrometers on the XMM and Chandra satellites initiated a new era in x-ray astronomy. Despite their successes, there is still need for instrumentation that can provide higher spectral resolution with high throughput in the Fe-K band and for extended sources. What is needed is a non-dispersive imaging spectrometer - essentially a 14-bit x-ray color camera. And a requirement for a nondispersive spectrometer designed to provide eV-scale spectral resolution is a temperature below 0.1 K. The required spectral resolution and the constraints of thermodynamics and engineering dictate the temperature regime nearly independently of the details of the sensor or the read-out technology. Low-temperature spectrometers can be divided into two classes - - equilibrium and non-equilibrium. In the equilibrium devices, or calorimeters, the energy is deposited in an isolated thermal mass and the resulting increase in temperature is measured. In the non-equilibrium devices, the absorbed energy produces quantized excitations that are counted to determine the energy. The two approaches have different strong points, and within each class a variety of optimizations have been pursued. I will present the basic fundamentals of operation and the details of the most successful device designs to date. I will also discuss how the measurement priorities (resolution, energy band, count rate) influence the optimal choice of detector technology.

Kilbourne, Caroline↗
NASA NTRS2012

The Prompt-afterglow Connection in Gamma-ray Bursts: a Comprehensive Statistical Analysis of Swift X-ray Light-curves

We present a comprehensive statistical analysis of Swift X-ray light-curves of Gamma- Ray Bursts (GRBs) collecting data from more than 650 GRBs discovered by Swift and other facilities. The unprecedented sample size allows us to constrain the rest-frame X-ray properties of GRBs from a statistical perspective, with particular reference to intrinsic time scales and the energetics of the different light-curve phases in a common rest-frame 0.3-30 keV energy band. Temporal variability episodes are also studied and their properties constrained. Two fundamental questions drive this effort: i) Does the X-ray emission retain any kind of "memory" of the prompt γ-ray phase? ii) Where is the dividing line between long and short GRB X-ray properties? We show that short GRBs decay faster, are less luminous and less energetic than long GRBs in the X-rays, but are interestingly characterized by similar intrinsic absorption. We furthermore reveal the existence of a number of statistically significant relations that link the X-ray to prompt γ-ray parameters in long GRBs; short GRBs are outliers of the majority of these 2-parameter relations. However and more importantly, we report on the existence of a universal 3-parameter scaling that links the X-ray and the γ-ray energy to the prompt spectral peak energy of both long and short GRBs: E(sub X,iso)∝ E(sup 1.00+/-0.06)(sub γ,iso) /E(sup 0.60+/-0.10)(sub pk).

Gamma-Ray Bursts↗
NASA NTRS1972

Nonlinear actuator disk theory.

Results obtained from a recent investigation of the flowfield induced by a heavily loaded actuator disk. First, the governing nonlinear integral equations are formulated from two different points of view, and the iterative solution is briefly outlined. Calculated flow patterns are presented for representative advance ratios and blade circulation distributions. For the static condition, the experimentally observed lingering of the tip vortices in the propeller plane, and the insensitivity of the streamline pattern to thrust coefficient are both accounted for, and a 'dividing streamline' - apparently not previously discussed in the literature, is predicted for the nonstatic case. Finally, the relationship between the actuator disk flow and the zero harmonic of the flowfield induced by a finite-bladed propeller is considered.

Greenberg, M. D.↗
NASA NTRS1994

A meteorological interpretation of the Arctic Boundary Layer Expedition (ABLE) 3B flight series

The Arctic Boundary Layer Expedition (ABLE) 3B was conducted to determine the summertime tropospheric distribution, sources, and sinks of important trace gas and aerosol species over the wetlands and boreal forests of central and eastern Canada. Isentropic trajectories and analyzed midtropospheric circulation patterns were used to group flights according to the transport histories of polar, midlatitude, or tropical air masses which were sampled. These data were then divided into bands of potential temperature levels representing the low, middle, and maximum aircraft altitudes to assess the effects of both local and long distance transport and natural and man-made pollutants to the measured chemical species. Detailed case studies are provided to depict the complex three-dimensional airflow regimes that transported air with differing chemical signatures to the study area. Mission 6 details the large-scale movement of smoke in the generally prevailing west to northwesterly airflow that was observed on the majority of flights. Mission 1 analyzes the horizontal and vertical motions of maritime Pacific air in the upper troposphere that was routinely mixed downward to the aircraft altitude. Finally, mission 14 tracks the far northward excursion of tropical air that had been associated with a Pacific typhoon. The following three factors all had important influences on the collected chemical data sets: (1) local and distant stratospheric in puts into the upper and middle troposphere; (2) biomass-burning plumes from active fires in Alaska and Canada; (3) a band of 'low ozone' upper tropospheric air that was observed by airborne differential absorption lidar (DIAL) above the aircraft maximum altitude. Other modification factors observed on some flights included urban pollution from U.S. and Canadian cities, tropical air that had been associated with a Pacific typhoon, and precipitation scavenging by clouds and rain. Many flights were affected by several of the above factors which led to complex chemical signatures that will be discussed in other companion papers.

Shipham, Mark C.↗
NASA NTRS1993

The chronic infusion of nicotine into the developing chick embryo does not alter the density of (-)-[3H]nicotine-binding sites or vestibular function

(-)-Nicotine (1.2 mg/day) or saline was infused into chick embryos (Gallus domesticus) for 10 days beginning 12 h beyond the eight day of incubation (E8 + 12 h). Twelve h beyond the eighteenth day of incubation (E18 + 12 h), the eggs were opened to access the embryos and subcutaneous skull electrodes placed. Short latency vestibular response thresholds and input/output functions were determined to assess neurophysiological consequences of chronic nicotine administration. Samples of serum and extraembryonic (amniotic and albumen) fluid were analyzed by gas chromatography-mass spectrometry to determine the levels of nicotine and its major metabolite, cotinine. The brains were removed and divided into diencephalon and mesencephalon and the density of (-)-[3H]nicotine binding sites in each brain area was measured. Nicotine and cotinine were found in the serum and extraembryonic fluid, but nicotinic receptors were not up-regulated in the brains of animals infused with nicotine in comparison to controls. Vestibular response thresholds also did not differ between nicotine-treated and control animals.

NASA Discipline Neuroscience↗
NASA NTRS2004

Extremely Red Objects in the Lockman Hole

We investigate extremely red objects (EROs) using near- and mid-infrared observations in five passbands (3.6 to 24 microns) obtained from the Spitzer Space Telescope, and deep ground-based R and K imaging. The great sensitivity of the Infrared Array Camera (IRAC) camera allows us to detect 64 EROs (a surface density of 2.90 +/- 0.36 arcmin(exp -2); [3.6](sub AB) is less than 23.7) in only 12 minutes of IRAC exposure time, by means of an R - [3.6] color cut (analogous to the traditional red R - K cut). A pure infrared K - [3.6] red cut detects a somewhat different population and may be more effective at selecting z greater than 1.3 EROs. We find approximately 17% of all galaxies detected by IRAC at 3.6 or 4.5 microns to be EROs. These percentages rise to about 40% at 5.8 microns, and about 60% at 8.0 microns. We utilize the spectral bump at 1.6 microns to divide the EROs into broad redshift slices using only near-infrared colors (2.2/3.6/4.5 microns). We conclude that two-thirds of all EROs lie at redshift z greater than 1.3. Detections at 24 microns imply that at least 11% of 0.6 less than z and less than 1.3 EROs and at least 22% of z greater than 1.3 EROs are dusty star-forming galaxies.

galaxies↗
NASA NTRS2009

TCP/IP Interface for the Satellite Orbit Analysis Program (SOAP)

The Transmission Control Protocol/ Internet protocol (TCP/IP) interface for the Satellite Orbit Analysis Program (SOAP) provides the means for the software to establish real-time interfaces with other software. Such interfaces can operate between two programs, either on the same computer or on different computers joined by a network. The SOAP TCP/IP module employs a client/server interface where SOAP is the server and other applications can be clients. Real-time interfaces between software offer a number of advantages over embedding all of the common functionality within a single program. One advantage is that they allow each program to divide the computation labor between processors or computers running the separate applications. Secondly, each program can be allowed to provide its own expertise domain with other programs able to use this expertise.

Carnright, Robert↗
NASA NTRS2013

Investigation of Control Inceptor Dynamics and Effect on Human Subject Performance

The control inceptor used in a vehicle simulation is an important part of adequately representing the dynamics of the vehicle. The inceptor characteristics are typically based on a second order spring mass damper system with damping, force gradient, breakout force, and natural frequency parameters. Changing these parameters can have a great effect on pilot control of the vehicle. A quasi transfer of training experiment was performed employing a high fidelity and a low fidelity control inceptor. A disturbance compensatory task was employed which involved a simple horizon line disturbed in roll by a sum of sinusoids presented in an out-the-window display. Vehicle dynamics were modeled as 1/s and 1/s2. The task was to maintain level flight. Twenty subjects were divided between the high and the low fidelity training groups. Each group was trained to a performance asymptote, and then transferred to the high fidelity simulation. RMS tracking error, a PSD analysis, and a workload analysis were performed to quantify the transfer of training effect. Quantitative results of the experiments show that there is no significant difference between the high and low fidelity training groups for 1/s plant dynamics. For 1/s2 plant dynamics there is a greater difference in tracking performance and PSD; and the subjects are less correlated with the input disturbance function

Stanco, Anthony A.↗
NASA NTRS1987

VLA observations of a sample of galaxies with high far-infrared luminosities

Preliminary results are presented from a radio survey of galaxies detected by the IRAS minisurvey. It was found that the main difference between galaxies selected in the far infrared and those selected in the optical is that the former have higher radio luminosities and that the radio emission is more centrally concentrated. There is some evidence that the strong central radio sources in the galaxies selected in the infrared are due to star formation, the star formation rate divided by the volume in which the star formation is occuring is 100 to 1000 times greater in the galaxies selected in the infrared than in the disks of normal galaxies.

Eagles, S. A.↗
NASA NTRS1992

Asteroid core crystallization by inward dendritic growth

The physics of the asteroid core crystallization process in metallic asteroids is investigated, with special attention given to the initial conditions for core crystallization, the manner of crystallization, the mechanisms acting in the stirring of the liquid, and the effects of elements such as sulfur on crystallization of Fe-Ni. On the basis of theoretical considerations and the published data on iron meteorites, it is suggested that the mode of crystallization in asteroid core was different from the apparent outward concentric crystallization of the earth core, in that the crystallization of asteroidal cores commenced at the base of the mantle and proceeded inward. The inward crystallization resulted in complex dendritic growth. These dendrites may have grown to lengths of hundreds of meters or perhaps even as large as the core radius, thereby dividing the core into separate magma chambers.

Haack, Henning↗
NASA NTRS1993

A review and analysis of neural networks for classification of remotely sensed multispectral imagery

A literature survey and analysis of the use of neural networks for the classification of remotely sensed multispectral imagery is presented. As part of a brief mathematical review, the backpropagation algorithm, which is the most common method of training multi-layer networks, is discussed with an emphasis on its application to pattern recognition. The analysis is divided into five aspects of neural network classification: (1) input data preprocessing, structure, and encoding; (2) output encoding and extraction of classes; (3) network architecture, (4) training algorithms; and (5) comparisons to conventional classifiers. The advantages of the neural network method over traditional classifiers are its non-parametric nature, arbitrary decision boundary capabilities, easy adaptation to different types of data and input structures, fuzzy output values that can enhance classification, and good generalization for use with multiple images. The disadvantages of the method are slow training time, inconsistent results due to random initial weights, and the requirement of obscure initialization values (e.g., learning rate and hidden layer size). Possible techniques for ameliorating these problems are discussed. It is concluded that, although the neural network method has several unique capabilities, it will become a useful tool in remote sensing only if it is made faster, more predictable, and easier to use.

Paola, Justin D.↗
NASA NTRS1997

Spatial layout affects speed discrimination

We address a surprising result in a previous study of speed discrimination with multiple moving gratings: discrimination thresholds decreased when the number of stimuli was increased, but remained unchanged when the area of a single stimulus was increased [Verghese & Stone (1995). Vision Research, 35, 2811-2823]. In this study, we manipulated the spatial- and phase relationship between multiple grating patches to determine their effect on speed discrimination thresholds. In a fusion experiment, we merged multiple stimulus patches, in stages, into a single patch. Thresholds increased as the patches were brought closer and their phase relationship was adjusted to be consistent with a single patch. Thresholds increased further still as these patches were fused into a single patch. In a fission experiment, we divided a single large patch into multiple patches by superimposing a cross with luminance equal to that of the background. Thresholds decreased as the large patch was divided into quadrants and decreased further as the quadrants were maximally separated. However, when the cross luminance was darker than the background, it was perceived as an occluder and thresholds, on average, were unchanged from that for the single large patch. A control experiment shows that the observed trend in discrimination thresholds is not due to the differences in perceived speed of the stimuli. These results suggest that the parsing of the visual image into entities affects the combination of speed information across space, and that each discrete entity effectively provides a single independent estimate of speed.

NASA Discipline Neuroscience↗
NASA NTRS2008

24-Way Radial Power Combiner/Divider for 31 to 36 GHz

The figure shows a prototype radial power-combining waveguide structure, capable of operation at frequencies from 31 to 36 GHz, that features an unusually large number (N = 24) of combining (input) ports. The combination of wide-band operation and large N is achieved by incorporating several enhancements over a basic radial power-combiner design. In addition, the structure can be operated as a power divider by reversing the roles of the input and output ports. In this structure, full-height waveguides at the combining ports are matched in impedance to reduced-height radial waveguides inside the combiner base. This match is effected by impedance-transforming stepped waveguide sections. This matching scheme is essential to achievement of large N because N is limited by the height of the waveguides in the base. Power is coupled from the 24 reduced- height radial waveguides into the TE01 mode of a circular waveguide in the base with the help of a matching post at the bottom of the base. ( TE signifies transverse electric, the first subscript is the azimuthal mode number, and the second subscript is the radial mode number.) More specifically, the matching post matches the reflections from the walls of the 24 reduced-height waveguides and enables the base design to exceed the bandwidth requirement. After propagating along the circular waveguide, the combined power is coupled, via a mode transducer, to a rectangular waveguide output port. The mode transducer is divided into three sections, each sized and shaped as part of an overall design to satisfy the mode-conversion and output-coupling requirements while enabling the circular waveguide to be wide enough for combining the 24 inputs over the frequency range of 31 to 36 GHz. During the design process, it was found that two different rectangular waveguide outputs could be accommodated through modification of only the first section of the mode converter, thereby enabling operation in multiple frequency ranges.

Epp, Larry↗
NASA NTRS1972

Study of astronaut restraints and mobility aids in a weightless shirtsleeve environment

A study, established to produce needed information about manual performance limits in intravehicular weightlessness such as the motions induced by the astronaut's direct application of force against the body of the vehicle or an object to be moved, is presented. Using both conventional and water immersion techniques, it was possible to develop realistic time estimates for astronaut station-to-station translation in Skylab, to simulate and analyze specific Skylab tasks involving force application and motion dynamics, and to evaluate certain thresholds of force application in weightlessness. The study was divided into three tasks. The first related to locomotion and verification or modification of present Skylab translation timelines. In all cases, translation times were less than the Skylab timelines indicated. The second task studied mass handling and transfer. Specifically, this involved measurement of the astronaut's ability to relocate the Skylab food lockers to stowage levels of three different heights and his ability to transfer the M509 PSS bottles between the OWS and the recharge station. The third task helped define the physical limits of man's ability to perform Skylab translation tasks under weightless conditions.

Loats, H. L., Jr.↗
NASA NTRS1986

Rapid fluctuations in solar flares

Study of rapid fluctuations in the emission of radiation from solar flares provides a promising approach for probing the magneto-plasma structure and plasma processes that are responsible for a flare. It is proposed that elementary flare bursts in X-ray and microwave emission may be attributed to fine structure of the coronal magnetic field, related to the aggregation of photospheric magnetic field into magnetic knots. Fluctuations that occur on a subsecond time-scale may be due to magnetic islands that develop in current sheets during magnetic reconnection. The impulsive phase may sometimes represent the superposition of a large number of the elementary energy-release processes responsible for elementary flare bursts. If so, the challenge of trying to explain the properties of the impulsive phase in terms of the properties of the elementary processes must be faced. Magnetic field configurations that might produce solar flares are divided into a number of categories, depending on: whether or not there is a filament; whether there is no current sheet, a closed current sheet, or an open current sheet; and whether the filament erupts into the corona, or is ejected completely from the Sun's atmosphere. Analysis of the properties of these possible configurations is compared with different types of flares, and to Bai's subdivision of gamma-ray/proton events.

Sturrock, Peter A.↗