Soil biogeochemistry across Central and South American tropical dry forests
Not provided.
Environmental Sciences & Ecology↗
SEARCH · Search NASA
Results for “dynamical decoupling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanisms of Low-Level Jet Formation in the U.S. Mid-Atlantic Offshore
Low level jets (LLJs) in the atmosphere exhibit a local windspeed maximum inthe boundary layer and are commonly observed both over land and in coastal environments. Because LLJs present strong positive shear beneath the maximum (or "jet nose") and negative shear above the nose, they pose a challenge to future offshore wind technology through their impacts on turbine performance and wakes. Summertime LLJs in the Great Plains have been attributed to frictional decoupling triggering an inertial oscillation, whilecoastal LLJs in California or the North Sea have additional driving mechanisms such as baroclinic forcing. By comparison, LLJs in the coastal US Mid-Atlantic have received less attention, with conflicting evidence about the mechanism that triggers these high shear events. Motivated by future wind energy development in the region, this work elucidates the atmospheric mechanisms of LLJ formation in the US Mid-Atlantic. Using observational data from two floating LiDAR buoys deployed bythe New York State Energy Research and Development Authority in the NY Bight, we identify four sustained LLJ events whose windspeeds and directions are well predicted by a WRF simulation (Weather Research and Forecasting Model). From analysis of the WRF data, we find that the four case studies provide evidence of concurrent inertial oscillation, reduced vertical mixing, and baroclinicity. In addition, we use simple atmospheric dynamics and a single-column-model to compare the relative contribution of each of these mechanisms to triggering the LLJ. By improving understanding and predictability of coastal mid-Atlantic LLJs, this work reduces uncertaintiesof wind energy deployment in the region, aiding the US's transition toward renewable energy.
atmospheric boundary layers↗
A Scalable Multigrid Reduction Framework for Multiphase Poromechanics of Heterogeneous Media
Simulation of multiphase poromechanics involves solving a multiphysics problem in which multiphase flow and transport are tightly coupled with the porous medium deformation. To capture this dynamic interplay, fully implicit methods, also known as monolithic approaches, are usually preferred. The main bottleneck of a monolithic approach is that it requires solution of large linear systems that result from the discretization and linearization of the governing balance equations. Because such systems are nonsymmetric, indefinite, and highly ill-conditioned, preconditioning is critical for fast convergence. Recently, most efforts in designing efficient preconditioners for multiphase poromechanics have been dominated by physics-based strategies. Current state-of-the-art “black-box” solvers such as algebraic multigrid (AMG) are ineffective because they cannot effectively capture the strong coupling between the mechanics and the flow subproblems, as well as the coupling inherent in the multiphase flow and transport process. In this work, we develop an algebraic framework based on multigrid reduction (MGR) that is suited for tightly coupled systems of PDEs. Using this framework, the decoupling between the equations is done algebraically through defining appropriate interpolation and restriction operators. One can then employ existing solvers for each of the decoupled blocks or design a new solver based on knowledge of the physics. We demonstrate the applicability of our framework when used as a “black-box” solver for multiphase poromechanics. Here, we show that the framework is flexible to accommodate a wide range of scenarios, as well as efficient and scalable for large problems.
97 MATHEMATICS AND COMPUTING↗
Air Carbon for Algae Production (AirCAP) – Expanding algae resource potential via direct (in-pond) air-CO2 capture.
Microalgae biofuel production potential in the United States is constrained by a lack of suitable cultivation locations within a close proximity to CO2 point-sources. Initial estimates suggest that removing the requirement of a concentrated CO2 source expands resource potential ten-fold, allowing the projection of production levels that approach levels of current U.S. diesel consumption. Decoupling cultivation locations from concentrated CO2 point-sources requires direct capture of air-CO2 into the pond bulk at a rate sufficient to meet maximum expected carbon assimilation rates (10 g C/m2-day and higher). Enhancement of the ingassing rate via chemical reaction, the direct reaction of dissolved CO2 with hydroxide ions, has been proposed as a mechanism to increase the ingassing rate of air-CO2. The central objectives of this project are to validate whether chemically enhanced air-CO2 ingassing rates in large raceway ponds can meet or exceed the level required to support high levels of algae productivity, then subsequently identify alkaliphilic strains able to withstand such conditions while maintaining a biomass productivity that enables process economics. Full scale ponds (~1 acre, unlined) will be used to validate ingassing rates as a function of pH expected at scale in a series of abiotic experiments. To date, mass-transfer dynamics have been characterized in ponds ranging from 1 to 1,000 m2. Initial results will be presented describing the mass transfer coefficient in 1-acre (~4,000 m2), unlined ponds. The maximum expected carbon ingassing rate will be measured during ingassing trials, in which pond pH is displaced from equilibrium via the addition of a strong base, with the subsequent decrease in pH (and increase in dissolved inorganic carbon) corresponding to the air-CO2 absorption rate. A mass-transfer model, validated with experimental results, will be used to project ingassing rates expected at pond scales (10 acres) required for production of commodity chemicals.
09 BIOMASS FUELS↗
Coordination and divergence in community assembly processes across co-occurring microbial groups separated by cell size
Setting the pace of life and constraining the role of members in food webs, body size can affect the structure and dynamics of communities across multiple scales of biological organization (e.g., from the individual to the ecosystem). However, its effects on shaping microbial communities, as well as underlying assembly processes, remain poorly known. Here, we analyzed microbial diversity in the largest urban lake in China and disentangled the ecological processes governing microbial eukaryotes and prokaryotes using 16S and 18S amplicon sequencing. We found that pico/nano-eukaryotes (0.22–20 μm) and micro-eukaryotes (20–200 μm) showed significant differences in terms of both community composition and assembly processes even though they were characterized by similar phylotype diversity. We also found scale dependencies whereby micro-eukaryotes were strongly governed by environmental selection at the local scale and dispersal limitation at the regional scale. Interestingly, it was the micro-eukaryotes, rather than the pico/nano-eukaryotes, that shared similar distribution and community assembly patterns with the prokaryotes. This indicated that assembly processes of eukaryotes may be coupled or decoupled from prokaryotes’ assembly processes based on eukaryote cell size. While the results support the important influence of cell size, there may be other factors leading to different levels of assembly process coupling across size classes. Additional studies are needed to quantitatively parse the influence of cell size versus other factors as drivers of coordinated and divergent community assembly processes across microbial groups. Regardless of the governing mechanisms, our results show that there are clear patterns in how assembly processes are coupled across sub-communities defined by cell size. These size-structured patterns could be used to help predict shifts in microbial food webs in response to future disturbance.
59 BASIC BIOLOGICAL SCIENCES↗
Quantifying Parameter Sensitivity, Interaction and Transferability in Hydrologically Enhanced Versions of Noah-LSM over Transition Zones
We use sensitivity analysis to identify the parameters that are most responsible for shaping land surface model (LSM) simulations and to understand the complex interactions in three versions of the Noah LSM: the standard version (STD), a version enhanced with a simple groundwater module (GW), and version augmented by a dynamic phenology module (DV). We use warm season, high-frequency, near-surface states and turbulent fluxes collected over nine sites in the US Southern Great Plains. We quantify changes in the pattern of sensitive parameters, the amount and nature of the interaction between parameters, and the covariance structure of the distribution of behavioral parameter sets. Using Sobol s total and first-order sensitivity indexes, we show that very few parameters directly control the variance of the model output. Significant parameter interaction occurs so that not only the optimal parameter values differ between models, but the relationships between parameters change. GW decreases parameter interaction and appears to improve model realism, especially at wetter sites. DV increases parameter interaction and decreases identifiability, implying it is overparameterized and/or underconstrained. A case study at a wet site shows GW has two functional modes: one that mimics STD and a second in which GW improves model function by decoupling direct evaporation and baseflow. Unsupervised classification of the posterior distributions of behavioral parameter sets cannot group similar sites based solely on soil or vegetation type, helping to explain why transferability between sites and models is not straightforward. This evidence suggests a priori assignment of parameters should also consider climatic differences.
Rosero, Enrique↗
Skyrmion dynamics and topological sorting on periodic obstacle arrays
Abstract We examine skyrmions under a dc drive interacting with a square array of obstacles for varied obstacle size and damping. When the drive is applied in a fixed direction, we find that the skyrmions are initially guided in the drive direction but also move transverse to the drive due to the Magnus force. The skyrmion Hall angle, which indicates the difference between the skyrmion direction of motion and the drive direction, increases with drive in a series of quantized steps as a result of the locking of the skyrmion motion to specific symmetry directions of the obstacle array. On these steps, the skyrmions collide with an integer number of obstacles to create a periodic motion. The transitions between the different locking steps are associated with jumps or dips in the velocity–force curves. In some regimes, the skyrmion Hall angle is actually higher than the intrinsic skyrmion Hall angle that would appear in the absence of obstacles. In the limit of zero damping, the skyrmion Hall angle is 90°, and we find that it decreases as the damping increases. For multiple interacting skyrmion species in the collective regime, we find jammed behavior at low drives where the different skyrmion species are strongly coupled and move in the same direction. As the drive increases, the species decouple and each can lock to a different symmetry direction of the obstacle lattice, making it possible to perform topological sorting in analogy to the particle sorting methods used to fractionate different species of colloidal particles moving over two-dimensional obstacle arrays.
36 MATERIALS SCIENCE↗
Dynamics of magnetosphere-ionosphere coupling including turbulent transport
The dynamics of magnetosphere-ionosphere coupling has been investigated by means of a two-dimensional two-fluid MHD model including anomalous resistivity. When field-aligned current is generated on auroral field lines, the disturbance propagates toward the ionosphere in the form of a kinetic Alfven wave. When the current exceeds a critical value, microscopic turbulence is produced, which modifies the propagation of the Alfven wave. This process is modeled by a nonlinear collision frequency, which increases with the excess of the drift velocity over the critical value. The system evolves toward an electrostatic structure, with the perpendicular electric field having a shorter scale than the field-aligned current. The approach to a steady state is strongly dependent on the presence or absence of the turbulence and on the boundary conditions imposed in the generator. As current is increased or scale size is decreased, the turbulent region reflects and absorbs most of the Alfven wave energy, decoupling the generator from the ionosphere.
Lysak, R. L.↗
Feasibility study for convertible engine torque converter
The feasibility study has shown that a dump/fill type torque converter has excellent potential for the convertible fan/shaft engine. The torque converter space requirement permits internal housing within the normal flow path of a turbofan engine at acceptable engine weight. The unit permits operating the engine in the turboshaft mode by decoupling the fan. To convert to turbofan mode, the torque converter overdrive capability bring the fan speed up to the power turbine speed to permit engagement of a mechanical lockup device when the shaft speed are synchronized. The conversion to turbofan mode can be made without drop of power turbine speed in less than 10 sec. Total thrust delivered to the aircraft by the proprotor, fan, and engine during tansient can be controlled to prevent loss of air speed or altitude. Heat rejection to the oil is low, and additional oil cooling capacity is not required. The turbofan engine aerodynamic design is basically uncompromised by convertibility and allows proper fan design for quiet and efficient cruise operation. Although the results of the feasibility study are exceedingly encouraging, it must be noted that they are based on extrapolation of limited existing data on torque converters. A component test program with three trial torque converter designs and concurrent computer modeling for fluid flow, stress, and dynamics, updated with test results from each unit, is recommended.
Source record↗
Observation of subcritical shocks in a collisional laboratory plasma: scale dependence near the resistive length
We present a study of subcritical shocks in a highly collisional laboratory plasma with a dynamically significant magnetic field. Shocks were produced by placing cylindrical obstacles into the supermagnetosonic ( $M_{{\rm MS}} \sim 1.9$ ) outflow from an inverse wire array z-pinch at the MAGPIE pulsed power facility ( $n_{e} \sim 8.5 \times 10^{17}\,{\rm cm}^{-3}$ , $v \sim 45\,{\rm km}\,{\rm s}^{-1}$ ). We demonstrate the existence of subcritical shocks in this regime and find that secondary stagnation shocks form in the downstream which we infer from interferometry and optical Thomson scattering measurements are hydrodynamic in nature. The subcritical shock width is found to be approximately equal to the resistive diffusion length and we demonstrate the absence of a jump in hydrodynamic parameters. Temperature measurements by collective optical Thomson scattering showed little temperature change across the subcritical shock ( ${<}10\,\%$ of the ion kinetic energy) which is consistent with a balance between adiabatic and Ohmic heating and radiative cooling. We demonstrate the absence of subcritical shocks when the obstacle diameter is less than the resistive diffusion length due to decoupling of the magnetic field from the plasma. These findings are supported by magnetohydrodynamic simulations using the Gorgon and AstroBEAR codes and discrepancies between the simulations and experiment are discussed.
Physics↗
Relativistic gas accretion onto supermassive black hole binaries from inspiral through merger
Accreting supermassive black hole binaries are powerful multimessenger sources emitting both gravitational and electromagnetic (EM) radiation. Understanding the accretion dynamics of these systems and predicting their distinctive EM signals is crucial to informing and guiding upcoming efforts aimed at detecting gravitational waves produced by these binaries. To this end, accurate numerical modeling is required to describe both the spacetime and the magnetized gas around the black holes. In this paper, we present two key advances in this field of research. First, we have developed a novel 3D general relativistic magnetohydrodynamics (GRMHD) framework that combines multiple numerical codes to simulate the inspiral and merger of supermassive black hole binaries starting from realistic initial data and running all the way through merger. Throughout the evolution, we adopt a simple but functional prescription to account for gas cooling through photon emission. Next, we have applied our new computational method to follow the time evolution of a circular, equal-mass, nonspinning black hole binary for ∼200 orbits, starting from a separation of 20𝑟 𝑔 and reaching the postmerger evolutionary stage of the system. We have shown how mass continues to flow toward the binary even after the binary “decouples” from its surrounding disk, but the accretion rate onto the black holes diminishes. We have identified how the minidisks orbiting each black hole are slowly drained and eventually dissolve as the binary compresses. We confirm previous findings that the system’s luminosity decreases by a factor of a few during inspiral; however, we observe an abrupt increase by ∼50% in this quantity at the time of merger, likely accompanied by an equally abrupt change in spectrum. Lastly, we have demonstrated that during the inspiral, fluid ram pressure regulates the fraction of the magnetic flux transported to the binary that attaches to the black holes’ horizons.
Accretion disk & black-hole plasma↗
In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge
Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.
Crystallographic preferred orientation↗
Unified Universal Control and Coordination of Inverter-Based Resources, and Validation for a PV + Battery Hybrid Plant
As renewable energy deployment grows, hybrid power plants (HPPs) combining photovoltaic (PV) and battery systems must evolve to offer both energy and grid stability services. These systems typically include a mix of grid-following (GFL) and grid-forming (GFM) inverters, presenting unique coordination and control challenges. This Department of Energy–funded project developed and validated a Unified Universal Control and Coordination (UUCC) framework for such PV + battery hybrid plants, enabling seamless and stable operation, including ultrafast black start, autonomous synchronization, and robust frequency and voltage regulation, under different grid conditions. The project significantly advanced the understanding of inverter-based resource (IBR) control by developing and validating three complementary system-level approaches for hybrid GFL/GFM operation: 1. A combined Virtual Resistance (VR)-based GFL and Virtual Oscillator Control (VOC)-based GFM method, where each inverter type is governed by a specialized control strategy. Together, these achieve stable, fast-response coordination, eliminating inrush current and enabling smooth black start and grid synchronization across a wide range of grid strengths. 2. A Deadbeat-based UUCC strategy, which uses discrete-time, switching-cycle-level control for both GFL and GFM inverters. This approach replaces traditional PI/PLL control with a control parameter-free, high-bandwidth framework that supports stable LVRT and instantaneous synchronization under all conditions. 3. A benchmark comparison with Siemens’ commercial GFM microgrid controller, which provided a fast baseline platform. The commercial approach decoupled v & f control was implemented on a commercial microgrid controller.The baseline commercial benchmark helped highlight superior transient response and black start performance offered by the deadbeat and VOC approaches. These technical contributions offer substantial improvements over conventional inverter control schemes, which often rely on slow phase-locked loop (PLL)-based synchronization, require careful control parameters tuning, and prone to unstable in weak grids with GFL inverters and in stiff grid with GFM inverters therefore challenging for hybrid GFL+GFM under all grid conditions. The deadbeat-based UUCC framework enables simpler, faster, and more robust operation of hybrid IBR systems using wide-bandgap (WBG) devices such as SiC power semiconductors. The rapid expansion of hybrid distributed energy resources (DERs), including residential and commercial PV-BESS installations such as Tesla Powerwall, PV with vehicle-to-grid (V2G) capability, and other integrated configurations, presents complex operational challenges for medium-voltage radial distribution feeders. These networks are subject to frequent disturbances such as faults, switching operations, rapid reclosing sequences, and feeder reconfigurations, all of which introduce dynamic stress on IBRs. In addition, planned feeder segmentation and deliberate islanding for resilience will require DERs that can autonomously perform blackstart, establish voltage and frequency references, and resynchronize with the main grid. The advanced deadbeat-based UUCC control and blackstart functionalities developed in this project directly address these requirements, enabling decentralized and autonomous operation of inverter-dominated DERs in distribution systems under a wide range of fault and reconfiguration scenarios. From a public benefit perspective, these innovations enable more reliable and cost-effective integration of renewable energy into distribution networks. The ability to autonomously black start and stabilize grids under varying grid conditions support accelerates recovery from outages and support decentralized resilient energy systems. By reducing system complexity and improving performance, this project lays critical groundwork for future inverter-dominated power grids that are clean, reliable, and accessible to all.
14 SOLAR ENERGY↗
7.2 kV Three-Port SiC Single-Stage Current-Source Solid-State Transformer With 90 kV Lightning Protection
This article proposes a multiport modular single-stage current-source solid-state transformer (SST) for applications like photovoltaic, energy storage integration, electric vehicle fast charging, data center, etc. The 7.2 kV 50 kVA current-source SST consists of five input-series output-parallel modules, each based on 3.3 kV SiC reverse-blocking MOSFET-plus-diode modules. The proposed SST has some unique features. First, compared to the voltage-source or matrix converter-based SSTs, the current-source SST has a unique advantage of single-stage isolated AC/DC or AC/AC conversion with an inductive DC link, but no medium-voltage (MV) AC experiments have been reported. This article for the first time demonstrates MV AC current-source SST up to 7.5 kV peak. Second, the multiport SST has a buffer port for active power decoupling (APD) or energy storage integration. The double-line-frequency power ripple from single-phase AC grid normally results in a large capacitor size in MV SSTs. The APD scheme is proposed in MV applications for the first time to enable a reduced DC link and the electrolytic capacitor-less SST with high reliability. Third, as a direct grid-connected converter without line-frequency transformer, insulation and protection are critical. A medium-frequency transformer design passes 55 kV basic-insulation level (BIL) and 60 kV high potential dielectrics withstand test with only 0.09% leakage inductance. Importantly, a lightning protection scheme is presented to protect the SST itself from 90 kV BIL impulse. Fourth, the proposed current-source SST topology is a modular soft-switching solid-state transformer (M-S4T) with full-range zero-voltage switching and controlled dv/dt for low electromagnetic interference. Furthermore, these concepts are verified in a three-port M-S4T prototype with forced oil cooling under single-module, stacked-module, steady-state, and dynamic operations.
14 SOLAR ENERGY↗
Agent-Based Modeling for the Circular Economy: Lessons Learned From Three Case Studies
The circular economy (CE) aims at decoupling human activities from resource use, creating wealth in the process. Recently, many scholars have questioned the link between increased circularity and sustainability, resulting in many methodological approaches being developed for that purpose. This presentation summarizes the insights gained from the application of agent-based modeling (ABM) to study the techno-economic and social conditions promoting circularity and sustainability of three technologies: photovoltaic (PV) modules, hard disk drives (HDDs), and wind blades. Four main categories of agents are defined in the ABM: asset owners, service providers (e.g., refurbishers), recyclers, and manufacturers. Two main CE strategies are represented: lifetime extension (through repair or reuse) and recycling. The developed models start by projecting installed capacities and end-of-life (EOL) quantities. Then the theory of planned behavior - a social psychology model explaining behavior adoption based on attitude, peer influence, and costs - is used to model the asset owners' EOL decision (i.e., landfill, recycle or extend the lifetime of the asset). Then, the quantities of assets flowing to the recycler and service provider agents and quantities of materials flowing to manufacturers are computed. Recyclers' economies of scale are dynamically modeled, and the value generated by the CE strategies for the recyclers, service providers, and manufacturers is computed within the model. When data are available, avoided greenhouse gas emissions resulting from the CE strategies adoption are calculated exogenously from the ABM simulations. Results show that with improved used PV modules warranties, the reuse CE strategy adoption increases from 1% to 23% between 2020 and 2050. Similarly, improved standards could enhance HDDs end-users trust in data-wiping - a prerequisite to reuse - leading to a 3-fold increase in the reuse rate and avoid about 5 million tons of CO2 eq by 2050. Regarding wind blades, 5-15 years lifetime extension could reduce EOL blade quantities by 13%. High costs and logistic issues prevent blades from being recycled in greater quantities. One insight from the case studies is the necessity to have mature secondary markets for reuse to be a viable option. Interestingly, PV reuse is limited by the willingness of PV owners to purchase used modules (on the demand side), while HDDs reuse is constrained by the lack of trust toward data-wiping (limiting the supply of used HDDs). The six limits of the CE concepts presented by Korhonen et al. (2018) are finally used to interpret the results. The HDD case study is an exemplary lock-in, where the first accepted practice (shredding) retains most of the market. The PV results illustrate the technical limitation to reuse, as the growing demand cannot be supplied entirely with used PV modules. The wind case study shows the relevance of clearly defining physical flows - what type of waste should wind blades be considered, how should they be transported and landfilled? - a crucial consideration that also applies to PV modules. Finally, the three case studies highlight the relevance of studying a technology's technical, economic, and market material efficiency potentials altogether and the potential benefit of coupling ABM to life cycle assessment.
agent-based modeling↗
Intercomparison of Dynamically and Statistically Downscaled Climate Change Projections over the Midwest and Great Lakes Region
Downscaling of global climate model (GCMs) simulations is a key element of regional-to-local-scale climate change projections that can inform impact assessments, long-term planning, and resource management in different sectors. Here, we conduct an intercomparison between statistically and dynamically downscaled GCMs simulations using the hybrid delta (HD) and the Weather Research and Forecast (WRF) Model, respectively, over the Midwest and Great Lakes region to 1) validate their performance in reproducing extreme daily precipitation (P) and daily maximum temperature (T max ) for summer and winter and 2) evaluate projections of extremes in the future. Our results show the HD statistical downscaling approach, which includes large-scale bias correction of GCM inputs, can reproduce observed extreme P and T max reasonably well for both summer and winter. However, raw historical WRF simulations show significant bias in both extreme P and T max for both seasons. Interestingly, the convection-permitting WRF simulation at 4-km grid spacing does not produce better results for seasonal extremes than the WRF simulation at 12 km using a parameterized convection scheme. Despite a broad similarity for winter extreme P projections, the projected changes in the future summer storms are quite different between downscaling methods; WRF simulations show substantial increases in summer extreme precipitation, while the changes projected by the HD approach exhibit moderate decreases overall. The WRF simulations at 4 km also show a pronounced decoupling effect between seasonal totals and extreme daily P for summer, which suggests that there could be more intense summer extremes at two different time scales, with more severe individual convective storms combined with longer summer droughts at the end of the twenty-first century.
54 ENVIRONMENTAL SCIENCES↗
Design and operating principles for high-performing anion exchange membrane water electrolyzers
Anion-exchange-membrane water electrolyzers (AEMWEs) provide a promising pathway to utilize low-carbon renewable electricity to produce clean hydrogen at high efficiency and purity, while maintaining low system costs compared to incumbent technologies. Though significant progress has been made in developing membranes and catalysts, AEMWEs still require better performance and durability to realize widespread deployment. Here, we overcome these challenges by decoupling anode and cathode polarization behavior via integration of a reference electrode in the membrane-electrode assembly. This measurement identified that the mass-transport losses dominate the cathode overpotential if feeding with electrolytes, while kinetic losses dominate the anode overpotential. These losses are mitigated by varying electrode properties and operating strategies, where a more hydrophobic, optimal loaded cathode, a high porosity anode, and operating with the cathode dry exhibited the best performance. These findings eventually enabled achieving a high-performing and durable complete PGM-free AEMWE operating at 1.5 Acm –2 for over 500h with negligible degradation, demonstrating significant progress for AEMWEs.
25 ENERGY STORAGE↗
Integrating Aquatic Metabolism and Net Ecosystem CO2 Balance in Short- and Long-Hydroperiod Subtropical Freshwater Wetlands
Abstract How aquatic primary productivity influences the carbon (C) sequestering capacity of wetlands is uncertain. We evaluated the magnitude and variability in aquatic C dynamics and compared them to net ecosystem CO 2 exchange (NEE) and ecosystem respiration ( R eco ) rates within calcareous freshwater wetlands in Everglades National Park. We continuously recorded 30-min measurements of dissolved oxygen (DO), water level, water temperature ( T water ), and photosynthetically active radiation (PAR). These measurements were coupled with ecosystem CO 2 fluxes over 5 years (2012–2016) in a long-hydroperiod peat-rich, freshwater marsh and a short-hydroperiod, freshwater marl prairie. Daily net aquatic primary productivity (NAPP) rates indicated both wetlands were generally net heterotrophic. Gross aquatic primary productivity (GAPP) ranged from 0 to − 6.3 g C m −2 day −1 and aquatic respiration ( R Aq ) from 0 to 6.13 g C m −2 day −1 . Nonlinear interactions between water level, T water , and GAPP and R Aq resulted in high variability in NAPP that contributed to NEE. Net aquatic primary productivity accounted for 4–5% of the deviance explained in NEE rates. With respect to the flux magnitude, daily NAPP was a greater proportion of daily NEE at the long-hydroperiod site (mean = 95%) compared to the short-hydroperiod site (mean = 64%). Although we have confirmed the significant contribution of NAPP to NEE in both long- and short-hydroperiod freshwater wetlands, the decoupling of the aquatic and ecosystem fluxes could largely depend on emergent vegetation, the carbonate cycle, and the lateral C flux.
Malone, Sparkle L.↗