Search NASA⌕ Search

SEARCH · Search NASA

Results for “editing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Adaptively coupled phase retrieval in multi-peak Bragg coherent diffraction imaging

Recent advances in Bragg coherent diffraction imaging (BCDI) experimental techniques permit routine measurement of multiple Bragg peaks from a single crystalline grain. The resulting images contain the full lattice distortion vector field which can be differentiated to provide lattice strain and rotation. With the advent of fourth-generation synchrotron light sources, such multi-peak datasets are produced at high rates, facilitating the need for rapid phase retrieval of the multiple peaks and subsequent image analysis. Here we describe and demonstrate a new implementation of a coupled phase retrieval technique for multi-peak BCDI which simultaneously treats each Bragg peak of the dataset and produces a three-dimensional image of the crystal's morphology and lattice distortion field. In addition, this method uses the redundant information contained in the various Bragg diffraction patterns to detect and suppress spurious signal appearing on the detector in a subset of the measurements. Compared with manual data editing, adaptive coupling produces a more consistent phase profile in reciprocal space and sharper surfaces in direct space, with no significant difference in computational cost. These improvements reduce the need for manual preprocessing and enable robust high-throughput analysis of multi-peak BCDI data, supporting near-real-time strain microscopy at modern synchrotron facilities.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Novel Design for Switchable Grid-Following and Grid-Forming Control

This paper presents the design of a novel grid- forming (GFM) control structure adapted from a typical grid- following (GFL) control structure with minimal edits, thereby enabling a switchable control structure for voltage sourced converters (VSCs) to operate in either GFL or GFM mode by simply switching a flag manually. The VSC is shown to be able to operate in the GFL control mode synchronizing to the main grid through a phase-locked-loop (PLL) and operate as a GFM controller with power-based synchronization for both grid-connected and islanded conditions. To guarantee smooth operation, the control schemes and the mode switching logic have been carefully designed and examined via a series of experiments. Here, the experiment results show that the switchable control structure can fulfill the desired control and operation functions and enable smooth transition between control modes.

14 SOLAR ENERGY↗
DOE OSTI2024

Increasing Rubisco as a simple means to enhance photosynthesis and productivity now without lowering nitrogen use efficiency

Summary Global demand for food may rise by 60% mid‐century. A central challenge is to meet this need using less land in a changing climate. Nearly all crop carbon is assimilated through Rubisco, which is catalytically slow, reactive with oxygen, and a major component of leaf nitrogen. Developing more efficient forms of Rubisco, or engineering CO 2 concentrating mechanisms into C 3 crops to competitively repress oxygenation, are major endeavors, which could hugely increase photosynthetic productivity (≥ 60%). New technologies are bringing this closer, but improvements remain in the discovery phase and have not been reduced to practice. A simpler shorter‐term strategy that could fill this time gap, but with smaller productivity increases (c. 10%) is to increase leaf Rubisco content. This has been demonstrated in initial field trials, improving the productivity of C 3 and C 4 crops. Combining three‐dimensional leaf canopies with metabolic models infers that a 20% increase in Rubisco increases canopy photosynthesis by 14% in sugarcane (C 4 ) and 9% in soybean (C 3 ). This is consistent with observed productivity increases in rice, maize, sorghum and sugarcane. Upregulation of Rubisco is calculated not to require more nitrogen per unit yield and although achieved transgenically to date, might be achieved using gene editing to produce transgene‐free gain of function mutations or using breeding.

Plant Sciences↗
DOE OSTI2025

Populus PtrbHLH011 Is a Transcriptional Co‐Regulator Involved in the Activation of Cell Wall Biosynthesis by Iron Deprivation

The lack of a mechanistic understanding of the environmental plasticity of secondary cell wall (SCW) biosynthesis restricts large-scale biomass and bioenergy production on marginal lands. Using Populus (poplar), a key bioenergy crop, we discovered that iron deprivation, a prevalent abiotic stress on marginal lands, stimulates SCW biosynthesis in stems. We identified the transcription factor PtrbHLH011 as a critical regulator underlying this response. Through integrated analyses involving phenotypic characterisation of PtrbHLH011 knockout and overexpression plants, functional genomics and molecular investigations, we established that PtrbHLH011 functions as a central regulator of SCW biosynthesis, iron homeostasis and flavonoid biosynthesis by directly repressing essential genes in these pathways. Iron deprivation downregulates PtrbHLH011 expression, subsequently activating these biosynthetic pathways. Notably, cytosine base editing-based knockout of PtrbHLH011 significantly enhanced plant growth, yielding up to a 110% increase in stem diameter and a 300% increase in leaf iron content. These findings present a novel regulatory mechanism linking environmental iron availability to SCW biosynthesis and illustrate a practical strategy to improve biomass yield on iron-deficient marginal lands. Furthermore, our mechanistic insights into PtrbHLH011 target recognition and regulation provide a valuable foundation for precise manipulation of gene regulatory networks, facilitating the development of high-performance bioenergy crops adapted to marginal environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Development of male-sterile lines of Setaria viridis to accelerate C 4 model plant genetics

Setaria viridis is a diploid C 4 grass in the Poaceae family, notable for its rapid life cycle of 6–8 weeks from sowing to seed—much shorter than the 4–5 months required by crops such as Zea mays and Sorghum bicolor . This fast growth makes S. viridis a valuable model for C 4 crop research. Genetic crosses are essential for studying gene function, but manual crossing is labor-intensive and time-consuming. Here, to address this, we developed a male-sterile line by targeting the S. viridis ortholog of Setaria italica NO POLLEN 1 ( SiNP1 ), which encodes a glucose–methanol–choline oxidoreductase required for pollen exine formation. Using Cas9 and TREX2 -mediated genome editing, we generated SiNP1 knockouts in both the S. viridis ME034V and A10.1 backgrounds that were fully male-sterile. Backcrossing T 0 male-sterile plants to ME034V wild-type followed by selfing yielded a stable BC 1 F 2 line homozygous for a 59 bp deletion in the S. viridis NO POLLEN 1 gene, easily genotyped by PCR and maintained by heterozygous siblings. Using this line, we developed a simple and efficient crossing protocol that eliminates the need for emasculation. This method enables a single person to perform up to 100 crosses per day—compared to 15 using traditional methods—and yields 20–32 F 1 hybrid seeds per panicle with 100% genetic purity. We also quantified pollen flow and outcrossing frequencies under greenhouse conditions to develop optimal bagging strategies and prevent unintended pollination. This resource accelerates genetic research in S. viridis , enhancing its utility as a premier C 4 model for mapping and functional genomics.

C4 research↗
DOE OSTI2025

Development and transferability of neural-network models for plasma-surface interactions

Plasma-surface interactions are increasingly critical to modern technologies; yet, accurate molecular dynamics simulations remain limited by the capabilities of interatomic potentials. Deep Potentials (DPs) promise to revolutionize the field by providing a systematic method for producing accurate interatomic potentials. The primary challenge of DP development is selecting a dataset, which efficiently spans the set of atomic environments one expects to encounter in the subsequent molecular dynamics simulations. The computational cost of density functional theory calculations, which are the typical basis for DP development, makes it impossible to directly verify the quality of a given DP. To address this challenge, we explore the development of a deep-learned interatomic potential, “DeepREBO,” trained to reproduce the behavior of the REBO2 empirical potential, enabling direct validation of training methodology and transferability. Using an active learning framework, we begin with a minimal dataset and iteratively expand it to train a Deep Potential-Smooth Edition model that faithfully reproduces REBO2 results for 25 eV hydrogen bombardment of diamond (001), a particularly challenging case. We show that small, carefully curated datasets can outperform large, unguided ones, with effective models requiring fewer than 15 000 snapshots. Subsequent transferability tests demonstrate that while DeepREBO generalizes well to diamond (111) surfaces, performance degrades for amorphous carbon or higher-energy impacts, highlighting the need for use-case-specific training data. We also evaluate methods to improve short-range repulsion. This study outlines best practices for training robust deep potentials and underscores the importance of dataset design for predictive plasma simulations.

Ab-initio molecular dynamics↗
DOE OSTI2026

3D reconstruction and neural rendering for adversarial machine learning

While evasion attacks on computer vision systems have been widely studied, creating attacks that remain effective under significant changes in viewpoint continues to be challenging. Traditional approaches often rely on affine transformations of images, but these approaches degrade at larger perspective shifts and often produce unrealistic or ineffective perturbations. Recent methods use differentiable renderers to improve viewpoint robustness, but they typically depend on manually constructed 3D models. We introduce a semi-automated pipeline that generates physically printable and perspective-invariant adversarial patches using only a small set of 2D images. Our method integrates 3D reconstruction, neural rendering, adversarial patch optimization, and an object detection victim model into a unified workflow. We use 2D Gaussian Splatting for high fidelity mesh reconstruction and FlexPara for surface parameterization that produces texture maps suitable for patch editing. Together, these components form a fully differentiable pipeline in PyTorch3D that links texture modification to model outputs, enabling efficient optimization of patches that remain effective across many viewpoints. The complete process, from image capture to patch printing and physical evaluation, can be completed within a few hours. We demonstrate the effectiveness of the resulting patches through attacks on the YOLOv8 object detection model and discuss remaining challenges and opportunities for improving robustness and scalability.

Singhvi, Vivaan [ORNL] (ORCID:0009000586288221)↗
DOE OSTI2024

Structure-guided discovery of ancestral CRISPR-Cas13 ribonucleases

The RNA-guided ribonuclease CRISPR-Cas13 enables adaptive immunity in bacteria and programmable RNA manipulation in heterologous systems. Cas13s share limited sequence similarity, hindering discovery of related or ancestral systems. Here, to address this, we developed an automated structural-search pipeline to identify an ancestral clade of Cas13 (Cas13an) and further trace Cas13 origins to defense-associated ribonucleases. Despite being one-third the size of other Cas13s, Cas13an mediates robust programmable RNA depletion and defense against diverse bacteriophages. However, unlike its larger counterparts, Cas13an uses a single active site for both CRISPR RNA processing and RNA-guided cleavage, revealing that the ancestral nuclease domain has two modes of activity. Discovery of Cas13an deepens our understanding of CRISPR-Cas evolution and expands opportunities for precision RNA editing, showcasing the promise of structure-guided genome mining.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Novel mutation leading to splice donor loss in a conserved site of DMD gene causes Duchenne muscular dystrophy with cryptorchidism

Background As one of the most common congenital abnormalities in male births, cryptorchidism has been found to have a polygenic aetiology according to previous studies of common variants. However, little is known about genetic predisposition of rare variants for cryptorchidism, since rare variants have larger effective size on diseases than common variants. Methods In this study, a cohort of 115 Chinese probands with cryptorchidism was analysed using whole-genome sequencing, alongside 19 parental controls and 2136 unaffected men. Additionally, CRISPR-Cas9 editing of a conserved variant was performed in a mouse model, with MRI screening used to observe the phenotype. Results In 30 of 115 patients (26.1%), we identified four novel genes ( ARSH , DMD , MAGEA4 and SHROOM2 ) affecting at least five unrelated patients and four known genes ( USP9Y , UBA1 , BCORL1 and KDM6A ) with the candidate rare pathogenic variants affecting at least two cases. Burden tests of rare variants revealed the genome-wide significances for newly identified genes (p<2.5×10 −6 ) under the Bonferroni correction. Surprisingly, novel and known genes were mainly found on X chromosome (seven on X and one on Y) and all rare X-chromosomal segregating variants exhibited a maternal inheritance rather than de novo origin. CRISPR-Cas9 mouse modelling of a splice donor loss variant in DMD (NC_000023.11:g.32454661C>G), which resides in a conserved site across vertebrates, replicated bilateral cryptorchidism phenotypes, confirmed by MRI at 4 and 10 weeks. The movement tests further revealed symptoms of Duchenne muscular dystrophy (DMD) in transgenic mice. Conclusion Our results revealed the role of the DMD gene mutation in causing cryptorchidism. The results also suggest that maternal-X inheritance of pathogenic defects could have a predominant role in the development of cryptorchidism.

Chen, Jianhai (ORCID:0000000300932003)↗
DOE OSTI2024

CRISPR Tools for Engineering Prokaryotic Systems: Recent Advances and New Applications

In the past decades, the broad selection of CRISPR-Cas systems has revolutionized biotechnology by enabling multimodal genetic manipulation in diverse organisms. Rooted in a molecular engineering perspective, we recapitulate the different CRISPR components and how they can be designed for specific genetic engineering applications. We first introduce the repertoire of Cas proteins and tethered effectors used to program new biological functions through gene editing and gene regulation. We review current guide RNA (gRNA) design strategies and computational tools and how CRISPR-based genetic circuits can be constructed through regulated gRNA expression. Then, we present recent advances in CRISPR-based biosensing, bioproduction, and biotherapeutics across in vitro and in vivo prokaryotic systems. Finally, we discuss forthcoming applications in prokaryotic CRISPR technology that will transform synthetic biology principles in the near future.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

CIMantic Graphs

CIMantic Graphs (aka CIM-Graph) is a new python library developed by PNNL to reduce the burden of working with the Common Information Model. CIMantic Graphs takes a novel approach of building in-memory labeled property graphs for creating, parsing, and editing CIM power system models.

Anderson, Alexander↗
DOE OSTI2024

Inventory of Composable Elements (ICE) v6.0.0

The Inventory of Composable Elements (ICE) is an open source registry software platform for managing information about biological parts. It is capable of recording information about plasmids, microbial host strains and seeds, as well as DNA parts. Includes features such as DNA sequence visualization, editing and annotation, auto-aligning sequencing trace files against reference templates, SBOL XML/RDF support, and web-of-registries functionality. The web of registries functionality provides strong support for distributed interconnected use and enables sharing and transfer of biological parts across various independent ICE instances. ICE adopts modern software development principles, leveraging component-base frameworks, offering a REST API for convenient third-party integration and emphasizing scalability, security, and service integrations for dynamic content availability. The source code is hosted at https://github.com/JBEI/ice. A public instance is available at public-registry.jbei.org, where users can try out features, upload parts or simply use it for their projects.

Plahar, Hector↗
DOE OSTI2024

Polaris Studio

SF-24-040 Polaris-studio is the Python entry point/front end for using the Polaris transportation simulator. The package contains the code used to create new models from open and user-provided data, an extensive range of convenience tools for data preparation and result analysis and the ability of designing, launching and tracking studies combining multiple individual Polaris simulations from a Python terminal. The Polaris Studio software contains several modules for accomplishing the above tasks, including the PolarisLib - the Polaris object model, Polaris Manager - code for setting up and running Polaris studies, QPOLARIS - an add-on for the QGis software to allow model files to be created and edited, PolarisVis - a juptyer-based postprocessing library, and Polaris Tools - a useful collection of supplemental tools for interacting with Polaris files.

Auld, Joshua↗
DOE OSTI2025

ARCS: Agentic Retrieval-Augmented Code Synthesis with Iterative Refinement

Agentic Retrieval-Augmented Code Synthesis with Iterative RefinementIn supercomputing, efficient and optimized code generation is essential to leverage high-performance systems effectively. We have developed Agentic Retrieval-Augmented Code Synthesis (ARCS), an advanced framework for accurate, robust, and efficient code generation, completion, and translation. ARCS integrates Retrieval-Augmented Generation (RAG) with Chain-of-Thought (CoT) reasoning to systematically break down and iteratively refine complex programming tasks. An agent-based RAG mechanism retrieves relevant code snippets, while real-time execution feedback drives the synthesis of candidate solutions. This process is formalized as a state-action search tree optimization, balancing code correctness with editing efficiency. Evaluations on the Geeks4Geeks and HumanEval benchmarks demonstrate that ARCS significantly outperforms traditional prompting methods in translation and generation quality. By enabling scalable and precise code synthesis, ARCS offers transformative potential for automating and optimizing code development in supercomputing applications, enhancing computational resource utilization

Bhattarai, Manish [Los Alamos National Labs]↗
DOE OSTI2026

CodeScribe Agent

SF-26-086 CodeScribe introduces a structured, multi-stage pipeline that combines deterministic program analysis with LLM-powered translation to enable incremental, testable Fortran-to-C++ migration. First, `code-scribe index` traverses the project directory tree and produces `scribe.yaml` metadata files recording all modules, subroutines, and functions at each level, giving the LLM accurate structural context instead of a hallucinated codebase model. Second, `code-scribe draft` performs the deterministic portion of translation — converting Fortran types to C++ equivalents, replacing `use` statements with `#include` and `using namespace` directives, and detecting constructs requiring special handling — while embedding`scribe-prompt` annotations that guide the LLM through non-trivial cases such as statement-function-to-lambda conversions and `extern "C"` wrapper generation. Third, `code-scribe translate` applies project-specific TOML-based few-shot prompt templates and submits the composed prompt to a pluggable LLM backend (OpenAI, Anthropic, Argonne ARGO, any OpenAI-compatible endpoint, or local Hugging Face checkpoints), producing a C++ source file, a header, and a Fortran-C++ interface file for each translated routine so the codebase compiles and runs correctly throughout the migration. Beyond translation, CodeScribe includes a tool-using coding agent (`code-scribe agent`) with read, bash, edit, and write capabilities, and a bounded loop mode (`code-scribe loop`) that runs repeated stateless agent sessions over a task file with restricted tool access — enabling sustained, auditable software development workflows for broader scientific computing tasks.

Dhruv, Akash [Argonne National Laboratory (ANL), A↗
DOE OSTI2026

TETA Autoresearch [SWR-26-089]

TETA Autoresearch is a template repository based on github.com/karpathy/autoresearch for AI-assisted research science in the TETA group in the Center for Integrated Mobility Sciences (CIMS) center at the National Laboratory of the Rockies. This software is a template for running autonomous research experiments that iteratively improve an ML model for a single optimization objective. Two execution modes share one harness: LLM mode - an agent (e.g. Claude Code) edits a scaffold train.py one change at a time, tagging each experiment, logging reasoning, and pushing results. Defined by program.md. Optimizer mode - an Optuna-backed driver (TPE / CMA-ES / Random) iterates over a domain-defined search space. Defined by optimizers/. RouteE (vehicle energy prediction) is the reference domain under domains/routee/. Adding a new domain is mechanical - see EXTENDING.md.

Reinicke, Nicholas [National Laboratory of the Roc↗
DOE OSTI2026

ORCHA: A performance portability system for extreme heterogeneity

Heterogeneity is the prevalent trend in the rapidly evolving high-performance computing (HPC) landscape in both hardware and application software. The diversity in hardware platforms, currently comprising various accelerators and a future possibility of specializable chiplets, poses a significant challenge for scientific software developers aiming to harness optimal performance across different computing platforms while maintaining the quality of solutions when their applications are simultaneously growing more complex. Code synthesis and code generation can provide mechanisms to mitigate this challenge. We have developed a divide and conquer approach where different aspects of performance are handled by different stand-alone tools that are interfaced with the application through generated code. This portability system, ORCHA, enables users to configure and orchestrate their computations among available resources on a platform by specifying a high-level recipe, thereby permitting a many-to-many paradigm where each recipe results in a different variant of the application. The core design goal is to let users decide the application’s hardware mapping and orchestration by editing only the high-level recipe—without modifying the maintained source code or binding the application to a particular runtime system. Tools in ORCHA distribution are: CG-Kit for translating the recipe into an execution graph; Milhoja to execute the graph by orchestrating data and task movement among hardware resources; and Macroprocessor that enables users to define their own code-shorthand for higher composability and easier management of code variants. Additionally, the design of ORCHA permits tools to work in a plug-and-play mode where the application can build and run without CG-Kit and Milhoja, and either tool can be swapped out for other tools with similar capabilities by modifying the code generation portion of ORCHA. In this paper, we describe the design of ORCHA and the role that code-generation plays in isolating applications from tools. We demonstrate the breadth of configurations ORCHA enables with a case study in which an application configuration is realized on three distinct hardware mappings—a GPU-centric, a CPU/GPU balanced, and a CPU/GPU concurrent layouts by using different recipes.

Lee, Youngjun↗
DOE OSTI2024

Genome-wide identification and diversity of FAD2, FAD3 and FAE1 genes in terms of biotechnological importance in Camelina species

False flax, or gold-of-pleasure (Camelina sativa) is an oilseed that has received renewed research interest as a promising vegetable oil feedstock for liquid biofuel production and other non-food uses. This species has also emerged as a model for oilseed biotechnology research that aims to enhance seed oil content and fatty acid quality. To date, a number of genetic engineering and gene editing studies on C. sativa have been reported. Among the most common targets for this research are genes, encoding fatty acid desaturases, elongases, and diacylglycerol acyltransferases. However, the majority of these genes in C. sativa are present in multiple copies due to the allohexaploid nature of the species. Therefore, genetic manipulations require a comprehensive understanding of the diversity of such gene targets.

09 BIOMASS FUELS↗