Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Effect of nanographene platelets on adsorption and sonophotocatalytic performances of TiO2/CuO composite for removal of organic pollutants

Highlights: • TiO{sub 2}/CuO composite incorporated with nanographene platelets (NGP). • Catalytic ability of TiO{sub 2}/CuO/NGP composite for removal of MB investigated. • Better adsorption ability for MB compared to TiO{sub 2}/CuO composite without NGP. • Adsorption ability increases with increasing NGP content up to optimal level. • TiO{sub 2}/CuO/NGP with 10 wt% NGP exhibits best photo- and sonophoto-catalysis. - Abstract: TiO{sub 2}/CuO composites incorporated with different amounts of nanographene platelets (NGP) were synthesized by hydrothermal processing. The TiO{sub 2}/CuO/NGP composite was characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, dynamical light scattering, Raman spectroscopy, Fourier–transform infrared spectroscopy, ultraviolet (UV)-visible diffuse reflectance spectroscopy, Brunauer—Emmett—Teller (BET) surface area analysis, and electron spin resonance. The catalytic ability of the composite for the removal of methylene blue from an aqueous solution was examined by adsorption, photocatalytic, and sonophotocatalytic experiments. The composite was found to exhibit better adsorption ability for methylene blue compared to the TiO{sub 2}/CuO composite without NGP. The photocatalytic activity of the composite was examined by UV and visible (Vis) light irradiation, while the sonophotocatalytic activity was examined by a combination of UV and Ultrasound (UV + US) and Vis + US. Both examinations showed that the light and ultrasonic responses were enhanced by compositing with NGP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Charge correlations and magnetoelastic coupling in intercalated transition metal dichalcogenides

The large van der Waals gap in transition metal dichalcogenides (TMDs) offers an avenue to tune the ground state of 2D materials through the intercalation of magnetic atoms. Here, we investigate the charge correlations in Fe 1/3 ⁢TaS 2 , Co 1/3 ⁢TaS 2 , and Fe 0.35 ⁢NbS 2 by combining angle-resolved photoemission spectroscopy (ARPES), x-ray scattering, magnetometry, and density functional theory (DFT). We find that, while short-range charge fluctuations develop in Ta-based compounds, Fe 0.35 ⁢NbS 2 exhibits long-range charge order which is strongly coupled with magnetic order and tunable by external magnetic field. Our electronic structure analysis reveals that intercalation reconstructs the Fermi surface via charge transfer and band renormalization, yet does not generate the nesting conditions compatible with the observed ordering vectors. Complementary phonon calculations further exclude a conventional electron-phonon origin of charge order. Together, these results establish magnetoelastic coupling as the dominant mechanism behind charge ordering in Fe 0.35 ⁢NbS 2 and highlight the contrasting role of Nb and Ta hosts in stabilizing correlated ground states in intercalated TMDs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis and Characterization of Pyridine Dipyrrolide Uranyl Complexes

The first actinide complexes of the pyridine dipyrrolide (PDP) ligand class, ( Mes PDP Ph )UO 2 (THF) and ( Cl2Ph PDP Ph )UO 2 (THF), are reported as the U VI uranyl adducts of the bulky aryl substituted pincers ( Mes PDP Ph ) 2– and ( Cl2Ph PDP Ph ) 2– (derived from 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine (H 2 Mes PDP Ph , Mes = 2,4,6-trimethylphenyl), and 2,6-bis(5-(2,6-dichlorophenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine (H 2 Cl2Ph PDP Ph , Cl 2 Ph = 2,6-dichlorophenyl), respectively). Following the in situ deprotonation of the proligand with lithium hexamethyldisilazide to generate the corresponding dilithium salts (e.g., Li 2 Ar PDP Ph , Ar = Mes of Cl 2 Ph), salt metathesis with [UO 2 Cl 2 (THF) 2 ] 2 afforded both compounds in moderate yields. The characterization of each species has been undertaken by a combination of solid- and solution-state methods, including combustion analysis, infrared, electronic absorption, and NMR spectroscopies. In both complexes, single-crystal X-ray diffraction has revealed a distorted octahedral geometry in the solid state, enforced by the bite angle of the rigid meridional ( Ar PDP Ph ) 2– pincer ligand. The electrochemical analysis of both compounds by cyclic voltammetry in tetrahydrofuran (THF) reveals rich redox profiles, including events assigned as U VI /U V redox couples. Here, a time-dependent density functional theory study has been performed on ( Mes PDP Ph )UO 2 (THF) and provides insight into the nature of the transitions that comprise its electronic absorption spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Activators generated by electron transfer for atom transfer radical polymerization of styrene in the presence of mesoporous silica nanoparticles

Graphical abstract: Effect of mesoporous silica nanoparticles (MCM-41) on the activator generated by electron transfer for atom transfer radical polymerization (AGET ATRP) is investigated. Decrement of conversion and number average molecular weight and also increment of polydispersity index (PDI) values are three main results of addition of MCM-41 nanoparticles. Incorporation of MCM-41 nanoparticles in the polystyrene matrix can clearly increase thermal stability and decrease glass transition temperature of the nanocomposites. - Highlights: • Spherical morphology, hexagonal structure, and high surface area with regular pore diameters of the synthesized MCM-41 nanoparticles are examined. • AGET ATRP of styrene in the presence of MCM-41 nanoparticles is performed. • Effect of MCM-41 nanoparticles addition on the polymerization rate, conversion and molecular weights of the products are discussed. • Improvement in thermal stability of the nanocomposites and decreasing T{sub g} values was also observed by incorporation of MCM-41 nanoparticles. - Abstract: Activator generated by electron transfer for atom transfer radical polymerization was employed to synthesize well-defined mesoporous silica nanoparticles/polystyrene composites. Inherent features of spherical mesoporous silica nanoparticles were evaluated by nitrogen adsorption/desorption isotherm, X-ray diffraction and scanning electron microscopy analysis techniques. Conversion and molecular weight evaluations were carried out using gas and size exclusion chromatography respectively. By the addition of only 3 wt% mesoporous silica nanoparticles, conversion decreases from 81 to 58%. Similarly, number average molecular weight decreases from 17,116 to 12,798 g mol{sup −1}. However, polydispersity index (PDI) values increases from 1.24 to 1.58. A peak around 4.1–4.2 ppm at proton nuclear magnetic resonance spectroscopy results clearly confirms the living nature of the polymerization. Thermogravimetric analysis shows that thermal stability of the nanocomposites increases by adding nanoparticles content. Decrease of glass transition temperature is also demonstrated by the addition of 3 wt% of silica nanoparticles according to the differential scanning calorimetry results.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Structural, bonding, and electronic properties of the hexagonal ferroelectric and paraelectric phases of LuMnO{sub 3} compound: A density functional theory study

We have investigated the structural, bonding, and electronic properties of both ferroelectric (FE) and paraelectric (PE) phases of the hexagonal LuMnO{sub 3} compound using calculations based on density functional theory. The structural properties have been determined by employing the generalized gradient approximation with Perdew-Burke-Ernzerhof and Wu-Cohen parameterization. The bonding and electronic properties have been treated by recently developed modified Becke-Johnson exchange potential, which succeeded to open a band gap for both PE and FE phases, in agreement with experimental predictions. The Bader’s topological analysis of electronic density showed that the character of the Lu–O axial bonds changes when the crystal exhibits the PE → FE structural transition. This fact is in agreement with experimental findings. The covalent character of the Lu–O bond significantly increases due to orbital hybridization between the Lu 5d{sub z}{sup 2} and O 2p{sub z}-states. This bonding mechanism causes the ferroelectricity in the hexagonal LuMnO{sub 3} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Ohmic contacts to nitrogen-incorporated n-type ultrananocrystalline diamond film grown on intrinsic single crystal diamond substrate

Nitrogen-incorporated ultrananocrystalline diamond (n-UNCD) films offer tremendous potential for diverse electronic applications. However, the absence of a reliable Ohmic contact at room temperature limits their practical integration and broader applicability. Here, in this study, we investigate the room temperature specific contact resistivity (ρ c ) of Ti/Pt/Au metal stack deposited on n-UNCD films grown on an intrinsic single crystal diamond substrate using a microwave plasma chemical vapor deposition system. We employ a circular transfer length model (c-TLM) and find the room temperature ρ c to be ∼4.67 × 10 −5 Ω cm 2 , which is among the lowest reported value for n-UNCD films. High temperature vacuum annealing conducted at 700 and 800 °C results in an initial improvement, followed by a minor degradation in ρ c values, respectively. The electrical contacts remain highly Ohmic for all measurements. Furthermore, cross-sectional transmission electron microscopy analysis suggests formation of conductive titanium carbide layer with no significant inter metallic diffusion. Overall, the electrical contacts demonstrate robust thermal stability, both of which are critical for attaining high-performance nanocrystalline diamond-based electronic devices.

Low resistance contacts↗
DOE OSTI2017

Electronic origin of the spin-phonon coupling effect in transition-metal perovskites

By applying the Wannier-based extended Kugel-Khomskii model, we carry out first-principles calculations and electronic structure analysis to understand the spin-phonon coupling effect in transition-metal perovskites. In this work, we demonstrate the successful application of our approach to SrMnO 3 and BiFeO 3 . We show that both the electron orbitals under crystal-field splitting and the electronic configuration should be taken into account in order to understand the large variances of spin-phonon coupling effects among various phonon modes as well as in different materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Extraction of the proton radius from electron-proton scattering data

We perform a new analysis of electron-proton scattering data to determine the proton electric and magnetic radii, enforcing model-independent constraints from form factor analyticity. A wide-ranging study of possible systematic effects is performed. An improved analysis is developed that rebins data taken at identical kinematic settings and avoids a scaling assumption of systematic errors with statistical errors. Employing standard models for radiative corrections, our improved analysis of the 2010 Mainz A1 Collaboration data yields a proton electric radius r E = 0.895(20) fm and magnetic radius r M = 0.776(38) fm. A similar analysis applied to world data (excluding Mainz data) implies r E = 0.916(24) fm and r M = 0.914(35) fm. The Mainz and world values of the charge radius are consistent, and a simple combination yields a value r E = 0.904(15) fm that is 4σ larger than the CREMA Collaboration muonic hydrogen determination. The Mainz and world values of the magnetic radius differ by 2.7σ, and a simple average yields r M = 0.851(26) fm. As a result, the circumstances under which published muonic hydrogen and electron scattering data could be reconciled are discussed, including a possible deficiency in the standard radiative correction model which requires further analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2013

Materials corrosion of high temperature alloys immersed in 600°C binary nitrate salt

Thirteen high temperature alloys were immersion tested in a 60/40 binary nitrate salt. Samples were interval tested up to 3000 hours at 600ÀC with air as the ullage gas. Chemical analysis of the molten salt indicated lower nitrite concentrations present in the salt, as predicted by the equilibrium equation. Corrosion rates were generally low for all alloys. Corrosion products were identified using x-ray diffraction and electron microprobe analysis. Fe-Cr based alloys tended to form mixtures of sodium and iron oxides, while Fe-Ni/Cr alloys had similar corrosion products plus oxides of nickel and chromium. Nickel based alloys primarily formed NiO, with chromium oxides near the oxide/base alloy interface. In625 exhibited similar corrosion performance in relation to previous tests, lending confidence in comparisons between past and present experiments. HA230 exhibited internal oxidation that consisted of a nickel/chromium oxide. Alloys with significant aluminum alloying tended to exhibit superior performance, due formation of a thin alumina layer. Soluble corrosion products of chromium, molybdenum, and tungsten were also formed and are thought to be a significant factor in alloy performance.

Kruizenga, Alan Michael↗
DOE OSTI2014

Combination of imaging mass spectrometry and electron microscopy for quasi nondestructive surface analysis

We report on a combination of imaging mass spectrometry (MS) and scanning electron microscopy (SEM) developed in a custom designed time-of-flight (TOF) MS instrument with laser post-ionization of sputtered atoms. Elemental (by MS) and topographical (by SEM) mapping of surfaces of heavily contaminated Si collectors from the NASA Genesis sample return mission enabled obtaining much more accurate and detailed depth distribution of the Solar Wind Mg and Ca implanted in these collectors. This is because the cleanest areas were identified by the SEM/MS mapping, and high resolution sputter depth profiling at these locations revealed near-surface (0-15 nm) depth distribution of Mg and Ca, that were used for more accurate fluence calculations of these Solar Wind species. MS imaging was virtually nondestructive at primary ion fluence 10(12) cm(-2), causing no effect on accuracy and precision of quantitative depth profiling that followed the imaging. We also demonstrate importance of such an approach by directly comparing high resolution depth profiles measured on clean areas versus arbitrarily selected areas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Direct Synthesis of Ammonia from Nitrate on Amorphous Graphene with Near 100% Efficiency

Abstract Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate‐to‐ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal‐based, and metal‐free catalysts with high nitrate‐to‐ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight‐electron reduction of NO 3 − to NH 3 with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm −2 h −1 at −0.93 V versus reversible hydrogen electrode. X‐ray pair‐distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO 3 − reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on‐demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate‐polluted water and completing the NO x cycle.

Huang, Libei↗
DOE OSTI2018

Final Report - Few-Body Studies Using Electromagnetic Interactions

The work discussed here is an extension of work previously funded by U.S. Department of Energy Grant DE-FG02-97ER41025. Measurements of charged pion photoproduction from deuterium using the Laser Electron Gamma Source (LEGS) at the Brookhaven National Laboratory previously made by us, as members of the LEGS Collaboration, resulted in the most interesting result of two decades of work. By measuring the production of a charged pion (π + ) in coincidence with an emitted photon we observed structures in the residual two-nucleon system. These indicated the existence of rare, long-lived states not explicable by standard nuclear theory; they suggested a set of configurations not explicable in terms of a nucleon-nucleon pair. The existence of such “exotic” structures has formed the foundation for most of the work that has ensued. Several measurements at various laboratories have supported, but not proved, the existence of these exotic states. The rarity of these states made their existence undetectable in most previous measurements. Only by observing characteristic signatures of such states (i.e., decay photons), by using very specific kinematics which isolate certain reaction products, or by measuring polarization-dependent observables. During the period of this grant we pursued and made progress on the development of experiments to be performed at the High Intensity Gamma Source (HIGS) of the Tri Universities Nuclear Laboratory (TUNL). Our understanding of photon- and electron-induced nuclear reactions depends on understanding of the basic electron and photon interaction. Recently, the issue of two-photon contributions has arisen in the context of deeply inelastic electron scattering. One way to address this is to measure asymmetries in the Bethe-Heitler ee process. We also made progress in developing the detectors required to measure these asymmetries at HIGS. During the last several years the apparent discrepancy between the size of the proton as measured using electrons and that as measured using muons has received a great deal of attention. Working with colleagues at the Jefferson Laboratory (JLAB) we showed that the apparent discrepancy was almost surely the result of mistakes in the statistical analysis of electron scattering data, that there is almost surely no discrepancy.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Kinetic Analysis of Proton-Coupled Electron Transfer at an Electrode-Immobilized Complex

An alkyne-terminated cobalt complex, [Co(Cp)(dppe ≡H )(Cl)] + (Cp = cyclopentadienyl; dppe ≡H = 1,2-bis-(di-(4-ethynyl-phenyl)phosphino)ethane), (Co ≡H ) was immobilized onto a glassy carbon electrode using two attachment strategies: Cu(I) catalyzed azide–alkyne click chemistry and reductive electropolymerization. The modified electrodes prepared through reductive electropolymerization exhibit current densities and peak resolutions for the electrochemical reduction of the cobalt species, which are amenable to electroanalytical quantification of coupled chemical reactions. Through peak shift analysis of cyclic voltammograms recorded in the presence of 4-chloroanilinium tetrafluoroborate, we quantified the proton transfer rate constant for the stepwise proton-coupled electron transfer reaction that reduces the electrode-immobilized [Co(Cp)(dppe ≡H )(Cl)] + to [H–Co(Cp)(dppe ≡H )] + (k PT app = (9.3 ± 1.8) × 10 5 M –1 s –1 ). In conclusion, the extraction of kinetic parameters for an elementary proton-coupled electron transfer reaction of an electrode-immobilized complex represents the first experimental measurement of its type and lays crucial groundwork for kinetic analyses of hybrid catalyst–electrode architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Impact of Brine/CO 2 exposure on the transport and mechanical properties of the Mt Simon sandstone

When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can change due to brine/CO 2 -induced chemical reactions. The present study investigates the change in the flow-through characteristics, porosity, and the mechanical behavior of Mt. Simon Sandstone samples caused by exposure to brine/CO 2 . The cores, extracted from a depth interval of 2110.4–2111.4 m (6924–6927 ft) in the Mt. Simon formation, were first characterized for their mechanical and transport properties, and then aged in CO 2 -saturated brine at pressures of 17.24 MPa (2500 psi) and temperature of 50°C for one to two weeks. Following that, the changes in the transport and mechanical properties of the samples were analyzed using He pycnometry, flow perporometry and triaxial testing. Our experiments show that the porosity of the Mt. Simon samples slightly increases after exposure to CO 2 /brine, while the permeability increases more substantially depending on the stress state. Measurements of the flow-through pore size distribution (PSD) are indicative of the changes occurring and are consistent with the observed increases in permeability. Nitrogen adsorption tests (BET), before and after incubation, show a significant loss of pore volume in the mesoporous range that is indicative of clay dissolution. Weakening of the materials was observed based on the mechanical properties studied, a result that is consistent with the observed dissolution of clays that play a central role in the cementation of the quartz grains. Finally, the analysis of the brine compositions reveals an increase in concentration of most cations after incubation with the Mt. Simon cores. This is also consistent with mineral/clay dissolution, confirmed by the porosity, transport, and mechanical property measurements as well as electron microscopy analysis of the same samples.

58 GEOSCIENCES↗
DOE OSTI2013

Performance of a hybrid pyroelectric LiNbO{sub 3} and TiO{sub 2} nanotubes X-ray source

Effects of crystal length and temperature on performance and degradation properties of LiNbO{sub 3}/TiO{sub 2} pyroelectric/nanotube X-ray source were studied. Such hybrid LiNbO{sub 3}/TiO{sub 2} X-ray source was fabricated by bonding electrochemically grown TiO{sub 2} nanotubes on −z face of pyroelectric LiNbO{sub 3} crystal. In particular, it was found that maximum accelerated electron energy increased with height for both pure and hybrid LiNbO{sub 3}/TiO{sub 2} system for both heating and cooling cycles. For example, for 2 cm long hybrid structure the resulting maximum energy during heating cycle was 97 keV as compared to 74 keV for 1 cm long structure. The maximum energy for the pure sample without nanotubes increased from 45 keV to 66 keV. Increased endpoint energy of nanotube based X-ray source is attributed to electric field amplification on nanotube tips increasing the efficiency of residual gas ionization, leading to improved charge carrier transmission efficiency. The degradation properties were studied by performing multiple thermal cycles and results revealed that cluster nanotips erode over time. After 20 cycles they become flat as was evidenced from scanning electron microscope analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Design and optimization of a modular setup for measurements of three-dimensional spin polarization with ultrafast pulsed sources

ULTRASPIN is an apparatus devoted to the measurement of the spin polarization (SP) of electrons ejected from solid surfaces in a UHV environment. It is designed to exploit ultrafast light sources (free electron laser or laser high harmonic generation) and to perform (photo)electron spin analysis by an arrangement of Mott scattering polarimeters that measure the full SP vector. The system consists of two interconnected UHV vessels: one for surface science sample cleaning treatments, e-beam deposition of ultrathin films, and low energy electron diffraction/AES characterization. The sample environment in the polarimeter allows for cryogenic cooling and in-operando application of electric and magnetic fields. The photoelectrons are collected by an electrostatic accelerator and transport lens that form a periaxial beam that is subsequently directed by a Y-shaped electrostatic deflector to either one of the two orthogonal Mott polarimeters. The apparatus has been designed to operate in the extreme conditions of ultraintense single-X-ray pulses as originated by free electron lasers (up to 1 kHz), but it allows also for the single electron counting mode suitable when using statistical sources such as synchrotron radiation, cw-laser, or e-gun beams (up to 150 kcps).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Solvothermal synthesis of TiO{sub 2}/CNT composites and its physical and chemical properties

Anatase TiO{sub 2}/CNT composites of different CNT ratio were prepared by solvothermal method. The X-ray diffraction analysis result showed that the sample has characteristic peaks of anatase TiO{sub 2}. CNT incorporated TiO{sub 2} showed less peak intensity when compared to bare TiO{sub 2}. The grain size was calculated using the Scherrer equation and it is found to be ∼ 2.38 and 2.46 nm for pure TiO{sub 2} and 5% CNT/TiO{sub 2} composites respectively. Optical properties were studied using UV-visible diffuse reflectance analysis and photo luminescence analysis respectively. UV analysis reveals the shift in absorption peaks towards the visible region for composites when compared to bare TiO{sub 2} powder. Raman spectroscopy studies show the presence of characteristic peaks corresponding to anatase TiO{sub 2}, CNT. Morphological nature of the compounds was studied using High Resolution Transmission Electron Microscopy analysis respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Revealing the evolution of order in materials microstructures using multi-modal computer vision

The development of high-performance materials for microelectronics, energy storage, and extreme environments depends on our ability to describe and direct property-defining microstructural order. Our present understanding is typically derived from laborious manual analysis of imaging and spectroscopy data, which is difficult to scale, challenging to reproduce, and lacks the ability to reveal latent associations needed for mechanistic models. Here, we demonstrate a multi-modal machine learning (ML) approach to describe order from electron microscopy analysis of the complex oxide La 1−x Sr x FeO 3 . We construct a hybrid pipeline based on fully and semi-supervised classification, allowing us to evaluate both the characteristics of each data modality and the value each modality adds to the ensemble. We observe distinct differences in the performance of uni- and multi-modal models, from which we draw general lessons in describing crystal order using computer vision.

36 MATERIALS SCIENCE↗