Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Nanocrystalline CuInSSe thin films by chemical bath deposition technique

Crystalline CuInSSe thin films have been deposited on glass substrate by chemical bath deposition technique. The CuCl{sub 2}, InCl{sub 3}, thiourea and SeO{sub 2} were used as source materials for the Cu{sup 2+}, In{sup 3+}, S{sup 2−} and Se{sup 2−} ions and the Cu/In ratio was kept at 1.0. EDC was used as a complexing agent. The XRD, Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-Ray (EDAX) and Optical transmission studies were used for structural analysis, surface morphology, elemental analysis and optical band gap, of the grown thin films respectively. The deposition parameters such as pH, deposition temperature and deposition time were optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of variations in structural, optical parameters and bulk etch rate of CR-39 polymer due to electron irradiation

In this work, electron induced modifications on the bulk etch rate, structural and optical parameters of CR-39 polymer were studied using gravimetric, FTIR (Fourier Transform Infrared) and UV–vis (Ultraviolet–Visible) techniques, respectively. CR-39 samples were irradiated with 10 MeV electron beam for different durations to have the absorbed doses of 1, 10, 550, 5500, 16 500, and 55 000 kGy. From the FTIR analysis, the peak intensities at different bands were found to be changing with electron dose. A few peaks were observed to shift at high electron doses. From the UV-vis analysis, the optical band gaps for both direct and indirect transitions were found to be decreasing with the increase in electron dose whereas the opacity, number of carbon atoms in conjugation length, and the number of carbon atoms per cluster were found to be increasing. The bulk etch rate was observed to be increasing with the electron dose. The primary objective of this investigation was to study the response of CR-39 to high electron doses and to determine a suitable pre-irradiation condition. The results indicated that, the CR-39 pre-irradiated with electrons can have better sensitivity and thus can be potentially applied for neutron dosimetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linear magnetic susceptibility of anisotropic superconductors of cuboidal shape

In this study, a simplified model of anisotropic magnetic susceptibility in the Meissner–London vortex-free state of cuboidal superconducting samples is presented. Using this model, precision measurements of the magnetic response in three perpendicular directions of a magnetic field with respect to primary crystal axes can be used to extract the components of the London penetration depth, thus enabling the evaluation of the general superfluid density tensor, which is needed in the analysis of the superconducting gap structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Efficient 1-D Thermal Stratification Model for Pool-Type Sodium-Cooled Fast Reactors

Investigating thermal stratification in the upper plenum of a sodium fast reactor (SFR) is presently a technology gap in SFR safety analysis. Understanding thermal stratification will promote safe operation of the SFR before its commercial deployment. Stratified layers of liquid sodium with a large vertical temperature gradient could be established in the upper plenum of an SFR during a down-power or a loss-of-flow transient. These stratified layers are unstable and could result in uncertainties for the core safety of an SFR. In order to predict the occurrence of the thermal stratification efficiently, we developed a one-dimensional (1-D) transport model to estimate the temperature profile of the ambient fluid in the upper plenum. This model demands much less computational effort than computational fluid dynamics (CFD) codes and provides calculations with higher fidelity than historical system-level codes. Two flow conditions were considered separately in the current study depending on if in-vessel components are presented in the upper plenum. For the condition where in-vessel components, specifically the upper internal structure, are presented, we assumed that the impinging sodium was evenly dispersed in the ambient fluid within the distance between the bottom of the in-vessel component and the jet inlet surface. For the condition where no in-vessel components are presented, we assumed that the impinging sodium was evenly dispersed in the ambient fluid within the jet length, which was determined through data-driven trainings. The newly developed 1-D model showed similar performance with the CFD model in both cases. However, due to the assumption of flat profiles of the impinging jet axial dispersion rate, nonnegligible discrepancies between the 1-D prediction and the measured data were observed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SPITZER INFRARED SPECTROGRAPH SURVEY OF YOUNG STARS IN THE CHAMAELEON I STAR-FORMING REGION

We present 5-36 {mu}m mid-infrared spectra of 82 young stars in the {approx}2 Myr old Chamaeleon I star-forming region, obtained with the Spitzer Infrared Spectrograph (IRS). We have classified these objects into various evolutionary classes based on their spectral energy distributions and the spectral features seen in the IRS spectra. We have analyzed the mid-IR spectra of Class II objects in Chamaeleon I in detail, in order to study the vertical and radial structure of the protoplanetary disks surrounding these stars. We find evidence for substantial dust settling in most protoplanetary disks in Chamaeleon I. We have identified several disks with altered radial structures in Chamaeleon I, among them transitional disk candidates which have holes or gaps in their disks. Analysis of the silicate emission features in the IRS spectra of Class II objects in Cha I shows that the dust grains in these disks have undergone significant processing (grain growth and crystallization). However, disks with radial holes/gaps appear to have relatively unprocessed grains. We further find the crystalline dust content in the inner ({approx}<1-2 AU) and the intermediate ({approx}<10 AU) regions of the protoplanetary disks to be tightly correlated. We also investigate the effects of accretion and stellar multiplicity on the disk structure and dust properties. Finally, we compare the observed properties of protoplanetary disks in Cha I with those in slightly younger Taurus and Ophiuchus regions and discuss the effects of disk evolution in the first 1-2 Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

Generation and Validation of the iKp1289 Metabolic Model for Klebsiella pneumoniae KPPR1

Klebsiella pneumoniae has a reputation for causing a wide range of infectious conditions, with numerous highly virulent and antibiotic-resistant strains. Metabolic models have the potential to provide insights into the growth behavior, nutrient requirements, essential genes, and candidate drug targets in these strains. Here we develop a metabolic model for KPPR1, a highly virulent strain of K. pneumoniae. We apply a combination of Biolog phenotype data and fitness data to validate and refine our KPPR1 model. The final model displays a predictive accuracy of 75% in identifying potential carbon and nitrogen sources for K. pneumoniae and of 99% in predicting nonessential genes in rich media. We demonstrate how this model is useful in studying the differences in the metabolic capabilities of the low-virulence MGH 78578 strain and the highly virulent KPPR1 strain. For example, we demonstrate that these strains differ in carbohydrate metabolism, including the ability to metabolize dulcitol as a primary carbon source. Our model makes numerous other predictions for follow-up verification and analysis.

bacteria↗

The View from the Top of the Mountain: Building a Community of Practice with the GridWise Transactive Energy Framework

The topic of “transactive energy” has received growing attention over the past eighteen months. It has been a part, for example, of the NY Reforming the Energy Vision discussions and the topic of activities such as the National Institute of Standards Transactive Energy Challenge. The growing discussion stems from the realization that new approaches are needed to efficiently and reliably integrate growing numbers of distributed energy resources. In anticipation of the applicability of transactive energy systems to emerging challenges in Grid integration, the GridWise® Architecture Council (GWAC) began to build a community of practice in the area of transactive energy systems. Starting with a workshop on the topic of “transactive energy” in May 2011, the Council brought together about a dozen interested researchers and practitioners from utilities, vendors, labs and academia to compare their approaches and experience in order to create common definitions and understanding within this topical area. This was followed in March 2012 with a second workshop during which about twice as many attendees continued the discussion. At this workshop the need for both a roadmap and a document documenting the foundations of transactive energy, common vocabulary and other definitional aspects was recognized. These two workshops led to the Council organizing the First International Conference and Workshop on Transactive Energy which took place May 23 – 24, 2013 in Portland, Oregon. The Council has continued this work with additional topical workshops, the Second International Conference and Workshop on Transactive Energy held in December 2014, and is currently organizing the Third International Conference and Workshop on Transactive Energy Systems to be held in May 2016. This article provides a summary of the Council’s work to build the community of practice through creation of a Transactive Energy Framework document and related activities. In addition to seeing transactive energy discussions on the agenda for many conferences there are also group activities relating to transactive energy being coordinated by both NIST and SGIP with which GWAC is also involved. The NIST work aims to develop and enhance modeling and simulation tools and integration into modeling and simulation platforms for Transactive Energy evaluation, as well as demonstrate how different transactive approaches may be used to improve reliability and efficiency of the electric grid. This will be accomplished through development of a set of scenarios that can serve as ongoing reference points for modeling and simulation. It is also an example of helping to develop a Transactive Energy community. The ongoing Transactive Energy Coordination Group formed by SGIP reviews the progress and directions of transactive energy activities in related parts of the SGIP and collaborating organizations such as GWAC. One of its activities is assembling a core set of transactive energy use cases as representative of the transactive energy interface requirements. This will enable assessment of interoperability requirements for transactive energy applications and an analysis of standards coverage, gaps, and future needs.

Tranasactive Energy↗

Aggregate Protection Response of Motor Loads in Commercial Buildings

Protection plays a critical role in determining the dynamic response of the induction motor loads and the overall performance of composite load models when subjected to voltage sags or disturbances. Up to date, due to lack of understanding of the aggregate performance of the protection of motors, protection modeling of the motors becomes one of the least accurate parts in dynamic (composite) load models. This paper fills this gap by providing detailed analysis of the motor loads and their associated protection in commercial buildings and deriving the aggregate protection response based on integrated transmission and distribution dynamic co-simulation. The results showed that the aggregate protection response of motor loads varies significantly among different classes, which indicates the protection modeling that has been developed based on the assumption of similar or even identical responses and used in some composite load models need to be updated.

Huang, Qiuhua↗

Marine energy converters: Potential acoustic effects on fishes and aquatic invertebrates

The potential effects of underwater anthropogenic sound and substrate vibration from offshore renewable energy development on the behavior, fitness, and health of aquatic animals is a continuing concern with increased deployments and installation of these devices. Initial focus of related studies concerned offshore wind. However, over the past decade, marine energy devices, such as a tidal turbines and wave energy converters, have begun to emerge as additional, scalable renewable energy sources. Because marine energy converters (MECs) are not as well-known as other anthropogenic sources of potential disturbance, their general function and what is known about the sounds and substrate vibrations that they produce are introduced. Furthermore, while most previous studies focused on MECs and marine mammals, this paper considers the potential of MECs to cause acoustic disturbances affecting nearshore and tidal fishes and invertebrates. In particular, the focus is on particle motion and substrate vibration from MECs because these effects are the most likely to be detected by these animals. Finally, an analysis of major data gaps in understanding the acoustics of MECs and their potential impacts on fishes and aquatic invertebrates and recommendations for research needed over the next several years to improve understanding of these potential impacts are provided.

16 TIDAL AND WAVE POWER↗

On the ohmicity of Schottky contacts

The conditions under which Schottky contacts become ohmic are analyzed. Proceeding from classical concepts of the mechanisms of current flow, a generalized Schottky contact model is investigated. This model takes into account the thermionic current of majority charge carriers and the recombination current of minority carriers in Schottky contacts with a dielectric gap. Based on an analysis of the predictions of this model, ohmicity criteria are obtained for Schottky contacts and the conditions for a low injection level and the ohmicity of Si-based Schottky contacts are compared. It is shown that the conditions for Schottky-contact ohmicity do not coincide with those for p–n junctions.

36 MATERIALS SCIENCE↗

Digital holography for real-time non-invasive monitoring of larval fish at power plant intakes

Effective evaluation of technological and operational approaches to reduce entrainment of marine organisms at cooling water intake structures (CWIS) requires accurate organism-sensing systems. Current detection methods lead to large temporal data gaps, require tedious manual analysis, and are fatal to organisms. In this report we describe integrating deep learning with a non-lethal, non-intrusive imaging method—digital holography—to rapidly detect fish larvae. Laboratory experiments demonstrated that the instrument could successfully image fish larvae at flow rates exceeding ranges seen in CWIS. Holograms of two fish larvae species, in the presence of bubbles and detritus, were collected to build a large database for training a lightweight convolutional neural network. The model achieves 97% extraction accuracy in quantifying larvae, and distinguishing them from other particles, including detritus and bubbles, when applied to a dataset of manually classified images, exceeding previous metrics for non-lethal, accurate, and real-time detection. These results demonstrate the potential of in situ holographic imaging for monitoring endangered larval fish species at power plant intake structures, and for high-fidelity, real-time applications in monitoring aquatic ichthyoplankton.

endangered species↗

Commitment to Active Allyship Is Required to Address the Lack of Hispanic and Latinx Representation in the Earth and Atmospheric Sciences

In 2021, people of Hispanic and Latinx origin made up 6% of the atmospheric and Earth sciences workforce of the United States, yet they represent 20% of the population. Motivated by this disparity in Hispanic and Latinx representation in the atmospheric and Earth science workforce, this manuscript documents the lack of representation through existing limited demographic data. The analysis presents a clear gap in participation by Hispanic and Latinx people in academic settings, with a widening gap through each education and career stage. Several factors and challenges impacting the representation disparity include the lack of funding for and collaboration with Hispanic-serving institutions, limited opportunities due to immigration status, and limited support for international research collaborations. We highlight the need for actionable steps to address the lack of representation and provide targeted recommendations to federal funding agencies, educational institutions, faculty, and potential employers. While we wait for systemic cultural change from our scientific institutions, grassroots initiatives like those proudly led by the AMS Committee for Hispanic and Latinx Advancement will emerge to address the needs of the Hispanic and Latinx scientific and broader community. We briefly highlight some of those achievements. Lasting cultural change can only happen if our leaders are active allies in the creation of a more diverse, equitable, and inclusive future. Alongside our active allies we will continue to champion for change in our weather, water, and climate enterprise.

99 GENERAL AND MISCELLANEOUS↗

Data for The Role of Social Support on Midwestern Farmers’ Willingness to Grow Perennial Bioenergy Crops

The lack of farmers’ willingness to grow perennial bioenergy crops (PBCs) presents a critical barrier to the emergence of cellulosic biofuel production. The willingness relies on a complex network of economic, environmental, and social drivers, among which the influence of social factors (e.g., the influence of neighborhood, community, and communication) is less understood. This study addresses this knowledge gap via a survey analysis of midwestern farmers. The survey data are analyzed through ordinary least square regression and structural equation model, which together investigate the individual and interactive impacts of multiple factors on farmers’ decisions to adopt PBCs. Based on a farm-scale analysis, six statistically significant predictors of farmer willingness to grow PBCs are identified: perception of PBCs’ environment benefits, education level, willingness to take risks, familiarity with PBCs, portion of peers already growing PBCs, and support of biorefineries locating in the local community. Among these, the latter three predictors are social support variables. It is found that familiarity with the crops is the most significant predictor of willingness; familiarity is also an important intermediate variable that mediates the influence of many other predictors. In addition, peer adoption can both directly and indirectly affect willingness via its influence on familiarity. These findings suggest that it is a pressing need to improve farmers’ knowledge of PBCs to promote the adoption of such crops.

Economics↗

Integrated Nuclear-Renewable Energy Systems: Foundational Workshop Report

The U.S. Department of Energy (DOE) recognizes the need to transform the energy infrastructure of the U.S. and elsewhere to systems that can drastically reduce environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. Thus, DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options. A concept being advanced by the DOE Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) is tighter coupling of nuclear and renewable energy sources in a manner that produces new energy currency for the combined electricity grid, industrial manufacturing, and the transportation energy sectors. This integration concept has been referred to as a “hybrid system” that is capable of providing the right type of energy, at the right time, in the right place. At the direction of DOE-NE and DOE-EERE leadership, project leads at Idaho National Laboratory (INL), National Renewable Energy Laboratory (NREL) and Massachusetts Institute of Technology (MIT) have identified and engaged stakeholders in discussing integrated energy systems that would optimize renewable and nuclear energy integration on a region-by-region basis. Subsequent work will entail conduct of technical, economic, environmental and socio-political evaluations of the leading integrated system options based on a set of criteria established with stakeholder input. The Foundational Workshop for Integrated Nuclear – Renewable Energy Systems was organized around the following objectives: 1. Identify and refine priority region-specific opportunities for integrated nuclear-renewable energy systems in the U.S.; 2. Select Figures of Merit (FOM) to rank and prioritize candidate systems; 3. Discuss enabling technology development needs; 4. Identify analysis requirements, capabilities and gaps to estimate FOM for integrated system options; 5. Identify experimental needs to develop and demonstrate nuclear-renewable energy systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Key Nuclear Data Impacting Reactivity in Advanced Reactors

Advanced reactor concepts currently being developed throughout the industry are significantly different from light water reactor (LWR) designs with respect to geometry, materials, and operating conditions, and consequently, with respect to their reactor physics behavior. Given the limited operating experience with non-LWRs, the accurate simulation of reactor physics and the quantification of associated uncertainties are critical for ensuring that advanced reactor concepts operate within the appropriate safety margins. Nuclear data are a major source of input uncertainties in reactor physics analysis. As part of an ongoing project at Oak Ridge National Laboratory (ORNL), the effects of nuclear data uncertainties on key figures of merit associated with advanced reactor safety are being assessed for selected advanced reactor technologies. Key nuclear data relevant for reactor safety analysis for each selected advanced reactor technology were identified, and their impact on important key figures of merit was assessed. Available advanced reactor specifications were reviewed, results from studies performed at ORNL and other research institutions were consulted, and available evaluated nuclear data libraries were analyzed. This report summarizes the key nuclear data for nuclides in the fuel, as well as other significant data, including scattering and neutron capture in various materials for the moderator, coolant, and structure of the considered advanced reactors. For the considered advanced reactors that use low-enriched uranium (LEU) fuel, results from LWR studies provided insight into relevant nuclear data given the lack of available studies specifically addressing these new systems. The major nominal missing data that were identified consist of thermal scattering data and 135m Xe cross section data for molten salt reactor (MSR) analysis. The identified major gaps with respect to nuclear data uncertainties are missing uncertainties of thermal scattering data for high temperature gas-cooled reactors and moderated MSR systems, and incomplete uncertainties on angular distributions in particular for fast spectrum systems, such as sodiumcooled fast reactors, fast molten salt reactors, and heat pipe reactors. Furthermore, it was found that special attention should be paid to cross section and uncertainty differences between different evaluated nuclear data library releases, because significant differences in nuclear data that can lead to major differences in reactivity calculations were found, even for well-known nuclides.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advancing the Predictability of Water Cycle Phenomena via the Application of AI to Model Ensemble Simulations and Observations

AI has the power to identify new pathways to extended predictability of the water cycle via its application to model ensembles together with accompanying observations. We discuss both scientific and technological aspects of this challenge, and address the parts of the MODEX approach involving “Model simulations, evaluation, analysis, and benchmarking” and “Identification of key knowledge gaps”. The widespread incorporation of AI into model analysis will significantly advance Earth system predictability and our predictive capabilities.

54 ENVIRONMENTAL SCIENCES↗

Energy Storage for Manufacturing and Industrial Decarbonization (Energy StorM)

This report summarizes the needs, challenges, and opportunities associated with carbon-free energy and energy storage for manufacturing and industrial decarbonization. Energy needs and challenges for different manufacturing and industrial sectors (e.g., cement/steel production, chemicals, materials synthesis) are identified. Key issues for industry include the need for large, continuous on-site capacity (tens to hundreds of megawatts), compatibility with existing infrastructure, cost, and safety. Energy storage technologies that can potentially address these needs, which include electrochemical, thermal, and chemical energy storage, are presented along with key challenges, gaps, and integration issues. Analysis tools to value energy storage technologies in the context of manufacturing and industrial decarbonizations are also presented. Material is drawn from the Energy Storage for Manufacturing and Industrial Decarbonization (Energy StorM) Workshop, held February 8 - 9, 2022. The objective was to identify research opportunities and needs for the U.S. Department of Energy as part of its Energy Storage Grand Challenge program.

25 ENERGY STORAGE↗