Search NASA⌕ Search

SEARCH · Search NASA

Results for “generic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Instabilities in the aether

We investigate the stability of theories in which Lorentz invariance is spontaneously broken by fixed-norm vector 'aether' fields. Models with generic kinetic terms are plagued either by ghosts or by tachyons, and are therefore physically unacceptable. There are precisely three kinetic terms that are not manifestly unstable: a sigma model ({partial_derivative}{sub {mu}}A{sub {nu}}){sup 2}, the Maxwell Lagrangian F{sub {mu}}{sub {nu}}F{sup {mu}}{sup {nu}}, and a scalar Lagrangian ({partial_derivative}{sub {mu}}A{sup {mu}}){sup 2}. The timelike sigma-model case is well defined and stable when the vector norm is fixed by a constraint; however, when it is determined by minimizing a potential there is necessarily a tachyonic ghost, and therefore an instability. In the Maxwell and scalar cases, the Hamiltonian is unbounded below, but at the level of perturbation theory there are fewer degrees of freedom and the models are stable. However, in these two theories there are obstacles to smooth evolution for certain choices of initial data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Comptonization model for the submillimeter background

A new measurement of the submillimeter portion of the cosmic microwave background by Matsumoto et al. (1988) indicates that there may be a large excess of energy over that of a blackbody spectrum of temperature 2.74 K. Several models are presented with cosmological heat sources which produce Compton y-distortions large enough to fit the submillimeter background. The models adopt generic forms for these heat sources in terms of the expansion rate and the energy density of other forms of matter in the universe. A specific realization of the models in terms of a decaying vacuum is presented. Unique thermal histories are predicted in which the universe does not globally recombine. A rise in the spectrum at long wavelengths due to free-free emission of the hot intergalactic medium is predicted, and the accompanying mu-distortions are estimated.

Bartlett, James G.↗

Static Aeroelastic Modeling of a Sub-Scale Wind Tunnel Model with Novel Flap Concept

This paper examines the static aeroelastic modeling of a flexible wind tunnel model equipped with a novel control effector known as the Variable Camber Continuous Trailing Edge Flap (VCCTEF) system. The wind tunnel model is an approximately 10 percent sub-scale version of a wing designed to be equipped on a commerical transport aircraft such as the full-scale NASA Generic Transport Model (GTM). The structure of the model is made highly flexible such that a 10 percent of semi-span wing tip deflection is expected at a design lift condition, and a representation of the VCCTEF concept is incorporated on the model. Static aeroelastic modeling is conducted by using a representative single beam structural finite-element model coupled to a vortex-lattice aerodynamic model. The resulting aeroelastic model of the flexible wind tunnel model is compared against experimental wind tunnel test results from the actual model tested at the University of Washington Aeronautical Laboratory (UWAL). Comparison cases are made using reference and VICON measurements of VCCTEF flap deflections from the wind tunnel test data, and percent errors between the lift curve parameters are presented. The results show up to a maximum percent of error of <10% with regards to lift curve slope values between the aeroelastic model and the UWAL test data. The agreement of lift curve slope values from the aeroelastic model and experimental test results serves as validation for the coupled vortex-lattice finite-element static aeroelastic model.

Aeroelasticity↗

THE PHOTOIONIZED ACCRETION DISK IN HER X-1

We present an analysis of several high-resolution Chandra grating observations of the X-ray binary pulsar Her X-1. With a total exposure of 170 ks, the observations are separated by years and cover three combinations of orbital and superorbital phases. Our goal is to determine distinct properties of the photoionized emission and its dependence on phase-dependent variations of the continuum. We find that the continua can be described by a partial covering model which above 2 keV is consistent with recent results from Rossi X-Ray Timing Explorer studies and at low energies is consistent with recent XMM-Newton and BeppoSAX studies. Besides a power law with fixed index, an additional thermal blackbody of 114 eV is required to fit wavelengths above 12 A ({approx}1 keV). We find that likely all the variability is caused by highly variable absorption columns in the range (1-3) x 10{sup 23} cm{sup -2}. Strong Fe K line fluorescence in almost all observations reveals that dense, cool material is present not only in the outer regions of the disk but interspersed throughout the disk. Most spectra show strong line emission stemming from a photoionized accretion disk corona (ADC). We model the line emission with generic thermal plasma models as well as with the photoionization code XSTAR and investigate changes of the ionization balance with orbital and superorbital phases. Most accretion disk coronal properties such as disk radii, temperatures, and plasma densities are consistent with previous findings for the low state. We find that these properties change negligibly with respect to orbital and superorbital phases. A couple of the higher energy lines exhibit emissivities that are significantly in excess of expectations from a static ADC.

99 GENERAL AND MISCELLANEOUS↗

The development of CACTUS : a wind and marine turbine performance simulation code.

CACTUS (Code for Axial and Cross-flow TUrbine Simulation) is a turbine performance simulation code, based on a free wake vortex method, under development at Sandia National Laboratories (SNL) as part of a Department of Energy program to study marine hydrokinetic (MHK) devices. The current effort builds upon work previously done at SNL in the area of vertical axis wind turbine simulation, and aims to add models to handle generic device geometry and physical models specific to the marine environment. An overview of the current state of the project and validation effort is provided.

17 WIND ENERGY↗

Hund bands in spectra of multiorbital systems

Spectroscopy experiments are routinely used to characterize the behavior of strongly correlated systems. An in-depth understanding of the different spectral features is thus essential. Here, we show that the spectrum of the multiorbital Hubbard model exhibits unique Hund bands that occur at energies given only by the Hund coupling J H , as distinct from the Hubbard satellites following the interaction U. We focus on experimentally relevant single-particle and optical spectra that we calculate for a model related to iron chalcogenide ladders. The calculations are performed via the density-matrix renormalization group and Lanczos methods. Finally, the generality of the implications is verified by considering a generic multiorbital model within dynamical mean-field theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sensitivity analysis of helicopter IMC decelerating steep approach and landing performance to navigation system parameters

Results of a study to investigate, by means of a computer simulation, the performance sensitivity of helicopter IMC DSAL operations as a function of navigation system parameters are presented. A mathematical model representing generically a navigation system is formulated. The scenario simulated consists of a straight in helicopter approach to landing along a 6 deg glideslope. The deceleration magnitude chosen is 03g. The navigation model parameters are varied and the statistics of the total system errors (TSE) computed. These statistics are used to determine the critical navigation system parameters that affect the performance of the closed-loop navigation, guidance and control system of a UH-1H helicopter.

Karmali, M. S.↗

Low mass neutralino dark matter in minimal supergravity and more general models in the light of LHC data

The b{tau}jEeT signal at the ongoing LHC experiments is simulated with Pythia in the minimal supergravity (mSUGRA) and other models of supersymmetry (SUSY) breaking. Special attention is given to the compatibility of this signature with the low mass neutralino dark matter (LMNDM) scenario consistent with the Wilkinson Microwave Anisotropy Probe data. In the mSUGRA model the above signal as well as the LMNDM scenario are strongly disfavored due to the constraints from the ongoing SUSY searches at the LHC. This tension, however, originates from the model dependent correlations among the parameters in the strong and electroweak sectors of mSUGRA. That there is no serious conflict between the LMNDM scenario and the LHC data is demonstrated by constructing generic phenomenological models such that the strong sector is unconstrained or mildly constrained by the existing LHC data and parameters in the electroweak sector, unrelated to the strong sector, yield dark matter relic density consistent with the Wilkinson Microwave Anisotropy Probe data. The proposed models, fairly insensitive to the conventional SUSY searches in the jets+Ee{sub T} and other channels, yield observable signal in the suggested channel for L > or approx. 1 fb{sup -1} of data. They are also consistent with the LMNDM scenario and can be tested by the direct dark matter search experiments in the near future. Some of these models can be realized by nonuniversal scalar and gaugino masses at the grand unified theory scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search for dark matter in events with a hadronically decaying vector boson and missing transverse momentum in p p collisions at s = 13 TeV with the ATLAS detector

CERN-LHC. This entry relates to the search for Dark Matter (DM) in association with a hadronically decaying vector boson with 36.1 fb-1 of pp collision data at a center-of-mass energy of sqrt(s) = 13 TeV recorded by the ATLAS detector at the LHC. In adition to hadronic decays of W and Z bosons, decays of the non-Standard-Model vector boson Z' of unknown masses are also considered for the first time (mono-Z'). The results are interpreted in terms of limits on the invisible Higgs boson decays into Dark Matter particles, constraints on the patamter space of the simplified vector-mediator model and generic upper limits on the visible detector-level cross sections for the W/Z+DM production. The results of the mono-Z' are shown in the frame of two simplified-model scenarios involving the DM production in assocaiation with the Z' boson. These are the dark Higgs model and the dark fermion model, each with a light and heavy dark sector scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamic and thermal response finite element models of multi-body space structural configurations

Presented is structural dynamics modeling of two multibody space structural configurations. The first configuration is a generic space station model of a cylindrical habitation module, two solar array panels, radiator panel, and central connecting tube. The second is a 15-m hoop-column antenna. Discussed is the special joint elimination sequence used for these large finite element models, so that eigenvalues could be extracted. The generic space station model aided test configuration design and analysis/test data correlation. The model consisted of six finite element models, one of each substructure and one of all substructures as a system. Static analysis and tests at the substructure level fine-tuned the finite element models. The 15-m hoop-column antenna is a truss column and structural ring interconnected with tension stabilizing cables. To the cables, pretensioned mesh membrane elements were attached to form four parabolic shaped antennae, one per quadrant. Imposing thermal preloads in the cables and mesh elements produced pretension in the finite element model. Thermal preload variation in the 96 control cables was adjusted to maintain antenna shape within the required tolerance and to give pointing accuracy.

Edighoffer, Harold H.↗

Contrasting Time-Frequency Representations for Unknown Waveform Detection

In real-world applications like spectrum management and interference detection, dealing with unseen electromagnetic waveforms is critical. Although some methods attempt to simulate open set data using generator models, they face challenges in generating synthetic samples for open set while simultaneously selecting an optimal discriminator for accurate classification. This results in difficulties capturing distinctive features across classes, especially in dynamic scenarios where new classes emerge. To detect unseen waveforms, we propose combining time and frequency domain features with cosine similarity loss to enhance feature distinctiveness and enabling more accurate predictions. This approach efficiently captures more comprehensive information than single-domain representations or approaches without cosine loss. Additionally, our model avoids generic feature vectors by extracting class-specific features during training, resulting in improved class representation. The experiment results show that this combined feature approach with cosine loss outperforms single-domain models and improves accuracy by 10\% over models without cosine loss.

99 - GENERAL AND MISCELLANEOUS↗

Contrasting Time-Frequency Representations for Unknown Waveform Detection

Identifying unseen electromagnetic waveforms is critical for many applications, like interference management, electronic warfare and spectrum management. Traditionally this is done using statistical methods for anomaly detection, which has evolved to deep learning models for identifying the unseen data, formally termed as open set recognition. Some prior methods use a generative model to emulate open set data, which face challenges in generating synthetic samples for open set while simultaneously selecting an optimal discriminator for accurate classification. To alleviate this issue, we propose a discriminative model that effectively combines time and frequency domain features of communication signals for accurate predictions. We further introduce a cosine similarity loss that makes the domain specific features unique to enhance the prediction rate. Additionally, our model avoids generic feature vectors by extracting class-specific features during training, resulting in improved class representation. The experiment results show that this combined feature approach with cosine loss outperforms single-domain models and improves accuracy by 10% over models without cosine loss.

99 - GENERAL AND MISCELLANEOUS↗

Hi-alpha forebody design. Part 2: Determination of body shapes for positive directional stability

Computational Fluid Dynamics (CFD) has been used to study aircraft forebody flowfields at low speed high angle-of-attack conditions with sideslip. The purpose is to define forebody geometries which provide good directional stability characteristics under these conditions. The flows of the F-5A forebody and Erickson forebody were recomputed with better and refined grids. The results were obtained using a modified version of cfl3d to solve either the Euler equations or the Reynolds equations employing a form of the Baldwin-Lomax turbulence model. Based on those results, we conclude that current CFD methods can be used to investigate the aerodynamic characteristics of forebodies to achieve desirable high angle-of-attack characteristics. An analytically defined generic forebody model is described, and a systematic study of forebody shapes was then conducted to determine which shapes promote a positive contribution to directional stability at high angle-of-attack. A novel way of presenting the results is used to illustrate how the positive contribution arises. Based on the results of this initial parametric study, some guidelines for aerodynamic design to promote positive directional stability are presented.

Ravi, R.↗

Moduli vacuum misalignment and precise predictions in string inflation

The predictions for all the cosmological observables of any inflationary model depend on the number of e-foldings which is sensitive to the post-inflationary history of the universe. In string models the generic presence of light moduli leads to a late-time period of matter domination which lowers the required number of e-foldings and, in turn, modifies the exact predictions of any inflationary model. In this paper we compute exactly the shift of the number of e-foldings in Kähler moduli inflation which is determined by the magnitude of the moduli initial displacement caused by vacuum misalignment and the moduli decay rates. We find that the preferred number of e-foldings gets reduced from 50 to 45, causing a modification of the spectral index at the percent level. Our results illustrate the importance of understanding the full post-inflationary evolution of the universe in order to derive precise predictions in string inflation. To perform this task it is crucial to work in a setting where there is good control over moduli stabilisation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling and Field Test Planning Activities in Support of Disposal of Heat-Generating Waste in Salt

The modeling efforts in support of the field test planning conducted at LBNL leverage on recent developments of tools for modeling coupled thermal-hydrological-mechanical-chemical (THMC) processes in salt and their effect on brine migration at high temperatures. This work includes development related to, and implementation of, essential capabilities, as well as testing the model against relevant information and published experimental data related to the fate and transport of water. These are modeling capabilities that will be suitable for assisting in the design of field experiment, especially related to multiphase flow processes coupled with mechanical deformations, at high temperature. In this report, we first examine previous generic repository modeling results, focusing on the first 20 years to investigate the expected evolution of the different processes that could be monitored in a full-scale heater experiment, and then present new results from ongoing modeling of the Thermal Simulation for Drift Emplacement (TSDE) experiment, a heater experiment on the in-drift emplacement concept at the Asse Mine, Germany, and provide an update on the ongoing model developments for modeling brine migration. LBNL also supported field test planning activities via contributions to and technical review of framework documents and test plans, as well as participation in workshops associated with field test planning.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Environmental modeling and recognition for an autonomous land vehicle

An architecture for object modeling and recognition for an autonomous land vehicle is presented. Examples of objects of interest include terrain features, fields, roads, horizon features, trees, etc. The architecture is organized around a set of data bases for generic object models and perceptual structures, temporary memory for the instantiation of object and relational hypotheses, and a long term memory for storing stable hypotheses that are affixed to the terrain representation. Multiple inference processes operate over these databases. Researchers describe these particular components: the perceptual structure database, the grouping processes that operate over this, schemas, and the long term terrain database. A processing example that matches predictions from the long term terrain model to imagery, extracts significant perceptual structures for consideration as potential landmarks, and extracts a relational structure to update the long term terrain database is given.

Lawton, D. T.↗

A Time-Varying Model for Predicting Formaldehyde Emission Rates in Homes

Recent studies have succeeded in relating emissions of various volatile organic compounds to material mass diffusion transfer using detailed empirical characteristics of each of the individual emitting materials. While significant, the resulting models are often scenario specific and/or require a host of individual component parameters to estimate emission rates. This study developed an approach to estimate aggregated emissions rates based on a wide number of field measurements. We used a multi-parameter regression model based on previous mass transfer models to predict formaldehyde emission rate for a whole dwelling using field-measured, time-resolved formaldehyde concentrations, air exchange rates, and indoor environmental parameters in 63 California single-family houses built between 2011 and 2017. The resulting model provides time-varying formaldehyde emission rates, normalized by floor area, for each study home, assuming a well-mixed mass balance transport model of the home, and a well-mixed layer transport model of indoor surfaces. The surface layer model asserts an equilibrium concentration within the surface layer of the emitted materials that is a function of temperature and RH; the dwelling ventilation rate serves as a surrogate for indoor concentration. We also developed a more generic emission model that is suitable for broad prediction of emission for a population of buildings. This model is also based on measurements aggregated from 27 homes from the same study. We showed that errors in predicting household formaldehyde concentrations using this approach were substantially less than those using a traditional constant emission rate model, despite requiring less unique building information.

54 ENVIRONMENTAL SCIENCES↗

Profiles of upcoming HPC Applications and their Impact on Reservation Strategies

With the expected convergence between HPC, BigData and AI, new applications with different profiles are coming to HPC infrastructures. Here, we aim at better understanding the features and needs of these applications in order to be able to run them efficiently on HPC platforms. The approach followed is bottom-up: we study thoroughly an emerging application from the neuroscience community (SLANT) to understand its behavior. Based on these observations, we derive a generic, yet simple, application model (namely, a linear sequence of stochastic jobs). We expect this model to be representative for a large set of upcoming applications that require the computational power of HPC clusters without fitting the typical behavior of large-scale traditional applications. In a second step, we show how one can manipulate this generic model in a scheduling framework. Specifically we consider the problem of making reservations (both time and memory) for an execution on an HPC platform. We derive solutions using the model of the first step of this work. We experimentally show the robustness of the model, even with very few data or with another application, to generate the model, and provide performance gains with regards to standard and more recent approaches used in the neuroscience community.

97 MATHEMATICS AND COMPUTING↗