Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Photonic crystal enhanced light-trapping in thin film solar cells

We utilize photonic crystals to simulate enhanced light-trapping in a-Si:H thin film solar cells. A one dimensional photonic crystal or distributed Bragg reflector with alternating dielectric layers acts as low loss backreflector. A two dimensional photonic crystal between the absorber layer and the Bragg reflector diffracts light at oblique angles within the absorber. The photonic crystal geometry is optimized to obtain maximum absorption. The photonic crystal provides lossless diffraction of photons, increasing the photon path length within the absorber layer. The simulation predicts significantly enhanced photon harvesting between 600 and 775?nm below the band edge, and an absorption increase by more than a factor of 10 near the band edge. The optical path length ratio can exceed the classical limit predicted for randomly roughened scattering surfaces at most wavelengths near the band edge. The optical modeling is performed with a rigorous scattering matrix approach where Maxwell's equations are solved in Fourier space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Matching Crystal Structures Atom-to-Atom

Finding an optimal match between two different crystal structures underpins many important materials science problems, including describing solid-solid phase transitions and developing models for interface and grain boundary structures. Here, we formulate the matching of crystals as an optimization problem where the goal is to find the alignment and the atom-to-atom map that minimize a given cost function such as the Euclidean distance between the atoms. We construct an algorithm that directly solves this problem for large finite portions of the crystals and retrieves the periodicity of the match subsequently. We demonstrate its capacity to describe transformation pathways between known polymorphs and to reproduce experimentally realized structures of semi-coherent interfaces. Additionally, from our findings, we define a rigorous metric for measuring distances between crystal structures that can be used to properly quantify their geometric (Euclidean) closeness.

36 MATERIALS SCIENCE↗

Mechanism of Thermal Reversal of the (Fulvalene)tetracarbonyldiruthenium Photoisomerization: Toward Molecular Solar-Thermal Energy Storage

In the currently intensifying quest to harness solar energy for the powering of our planet, most efforts are centered around photoinduced generic charge separation, such as in photovoltaics, water splitting, other small molecule activation, and biologically inspired photosynthetic systems. In contrast, direct collection of heat from sunlight has received much less diversified attention, its bulk devoted to the development of concentrating solar thermal power plants, in which mirrors are used to focus the sun beam on an appropriate heat transfer material. An attractive alternative strategy would be to trap solar energy in the form of chemical bonds, ideally through the photoconversion of a suitable molecule to a higher energy isomer, which, in turn, would release the stored energy by thermal reversal. Such a system would encompass the essential elements of a rechargeable heat battery, with its inherent advantages of storage, transportability, and use on demand. The underlying concept has been explored extensively with organic molecules (such as the norbornadiene-quadricyclane cycle), often in the context of developing photoswitches. On the other hand, organometallic complexes have remained relatively obscure in this capacity, despite a number of advantages, including expanded structural tunability and generally favorable electronic absorption regimes. A highly promising organometallic system is the previously reported, robust photo-thermal fulvalene (Fv) diruthenium couple 1 {l_reversible} 2 (Scheme 1). However, although reversible and moderately efficient, lack of a full, detailed atom-scale understanding of its key conversion and storage mechanisms have limited our ability to improve on its performance or identify optimal variants, such as substituents on the Fv, ligands other than CO, and alternative metals. Here we present a theoretical investigation, in conjunction with corroborating experiments, of the mechanism for the heat releasing step of 2 {yields} 1 and its Fe (4) and Os (6) relatives. The results of the combined study has enabled a rigorous interpretation of earlier and new experimental measurements and paint a surprising picture. First-principles calculations were employed based on spin unrestricted density functional theory (DFT) with a non-empirical gradient corrected exchange-correlation functional. Ultrasoft pseudopotentials were used to describe the valence-core interactions of electrons, including scalar relativistic effects of the core. Wavefunctions and charge densities were expanded in plane waves with kinetic energies up to 25 and 200 Rydberg, respectively. Reaction pathways were delineated with the string method, as implemented within the Car-Parrinello approach. This method allows for the efficient determination of the minimum energy path (MEP) of atomistic transitions and thus also saddle points (transition states, TSs), which are the energy maxima along the MEP. All geometries were optimized until all forces on the atoms were less than 0.02 eV/{angstrom}. The calculated structures of 1 and 2 were in good agreement with their experimental counterparts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elucidation of Bottom-up Growth of CaCO3 Involving Prenucleation Clusters from Structure Predictions and Decomposition of Globally Optimized (CaCO3)n Nanoclusters

Low-energy minima structures for (CaCO3)n, n = 28, are predicted using bottom-up genetic algorithms in conjunction with density functional theory electronic structure calculations, in comparison with the frozen and relaxed top-down clusters generated by cuts from the calcite, vaterite, and aragonite crystal structures. Similarities in structural motifs for the bottom-up and relaxed top-down are revealed using a fragment recognition technique. Fragment energy decomposition analysis shows that the bottom-up and relaxed top-down clusters belong to two classes of amorphous clusters with distinct intracluster energy distributions, despite their structural similarity. The bottom-up clusters with >20 formula units are surface stabilized with negative surface energy densities. In contrast, the top-down clusters are interior stabilized with positive surface energy densities. We prove that the sign of the surface energy density determines whether the nucleation reaction energy as a function of nuclear size has a maximum or a minimum. The surface-stabilized bottom-up clusters are proposed to be a type of prenucleation cluster at the minimum of the nucleation reaction energy. A mechanism for mineralization of CaCO3 involving prenucleation clusters and nonclassical growth pathway is proposed on the basis of our theoretical findings, which is consistent with previous titration experiments.

calcium carbonate, prenucleation cluster, biominer↗

CrossLink: General Overview [Slides]

Problem: Traditional mesh generation approaches are labor intensive and have limited robustness when applied to parametric design exploration and optimization of complex geometries. While automatic mesh generation approaches exist, they tend to generate tetrahedral or mixed-hybrid meshes which are generally unsuitable for physics applications with strong shock waves, thin boundary layers, and strong gradients. In addition, simulations sizes in the billions of cells are becoming more common with traditional mesh generation methods quickly reaching scalability limits. Solution: CrossLink offers a topology-based mesh generation approach with unstructured block-filling methods and a scalable mesh generation engine. In addition, CrossLink incorporates a python-based API for seamless workflow integration and robust repeatability of the geometry handling and mesh generation process. This makes it ideal for parametric design study and optimization of complex geometries. Finally, future versions of CrossLink will offer a parametric mesh capability that optimizes a high-order mesh and enables reconstruction of the final mesh in memory by the physics solver.

97 MATHEMATICS AND COMPUTING↗

CrossLink: Advancements in Scalable Unstructured Mesh Generation [Slides]

Traditional mesh generation approaches are labor intensive and have limited robustness when applied to parametric design exploration and optimization of complex geometries. While automatic mesh generation approaches exist, they tend to generate tetrahedral or mixed-hybrid meshes which are generally unsuitable for physics applications with strong shock waves, thin boundary layers, and strong gradients. In addition, simulations sizes in the billions of cells are becoming more common with traditional mesh generation methods quickly reaching scalability limits. CrossLink offers a topology-based mesh generation approach with unstructured block-filling methods and a scalable mesh generation engine. In addition, CrossLink incorporates a python based API for seamless workflow integration and robust repeatability of the geometry handling and mesh generation process. This makes it ideal for parametric design study and optimization of complex geometries. Finally, future versions of CrossLink will offer a parametric mesh capability that optimizes a high-order mesh and enables reconstruction of the final mesh in memory by the physics solver.

97 MATHEMATICS AND COMPUTING↗

Performance Limits of an Alternating Current Electroluminescent Device

Abstract The use of an alternating current (AC) voltage is a simple, versatile method of producing electroluminescence from generic emissive materials without the need for contact engineering. Recently, it was shown that AC‐driven, capacitive electroluminescent devices with carbon nanotube network contacts can be used to generate and study electroluminescence from a variety of molecular materials emitting in the infrared‐to‐ultraviolet range. Here, performance trade‐offs in these devices are studied through comprehensive device simulations and illustrative experiments, enhancing understanding of the mechanism and capability of electroluminescent devices based on alternating as opposed to direct current (DC) schemes. AC‐driven electroluminescent devices can overcome several limitations of conventional DC‐driven electroluminescent devices, including the requirement for proper alignment of material energy levels and the need to process emitting materials into uniform thin films. By simultaneously optimizing device geometry, driving parameters, and material characteristics, the performance of these devices can be tuned. Importantly, the turn‐on voltage of AC‐driven electroluminescent devices approaches the bandgap of the emitting material as the gate oxide thickness is scaled, and internally efficient electroluminescence can be achieved using low‐mobility single‐layer emitter films with varying thicknesses and energy barrier heights relative to the contact.

Wang, Vivian↗

Integrated Solar-Driven Device with a Front Surface Semitransparent Catalysts for Unassisted CO 2 Reduction

Monolithic integrated photovoltaic-driven electrochemical (PV-EC) artificial photosynthesis is reported for unassisted CO 2 reduction. The PV-EC structures employ triple junction photoelectrodes with a front mounted semitransparent catalyst layer as a photocathode. The catalyst layer is comprised of an array of microscale triangular metallic prisms that redirect incoming light toward open areas of the photoelectrode to reduce shadow losses. Full wave electromagnetic simulations of the prism array (PA) structure guide optimization of geometries and length scales. An integrated device is constructed with Ag catalyst prisms covering 35% of the surface area. The experimental device has close to 80% of the transmittance with a catalytic surface area equivalent 144% of the glass substrate area. Experimentally this photocathode demonstrates a direct solar-to-CO conversion efficiency of 5.9% with 50 h stability. Selective electrodeposition of Cu catalysts onto the surface of the Ag triangular prisms allows CO2 conversion to higher value products enabling demonstration of a solar-to-C 2+ product efficiency of 3.1%. This design featuring structures that have a semitransparent catalyst layer on a PV-EC cell is a general solution to light loss by shadowing for front surface mounted metal catalysts, and opens a route for the development of artificial photosynthesis based on this scalable design approach.

14 SOLAR ENERGY↗

Purification of Propylene and Ethylene by a Robust Metal–Organic Framework Mediated by Host–Guest Interactions

Industrial purification of propylene and ethylene requires cryogenic distillation and selective hydrogenation over palladium catalysts to remove propane, ethane and/or trace amounts of acetylene. Here, we report the excellent separation of equimolar mixtures of propylene/propane and ethylene/ethane, and of a 1/100 mixture of acetylene/ethylene by a highly robust microporous material, MFM-520, under dynamic conditions. In situ synchrotron single crystal X-ray diffraction, inelastic neutron scattering and analysis of adsorption thermodynamic parameters reveal that a series of synergistic host-guest interactions involving hydrogen bonding and π⋯π stacking interactions underpin the cooperative binding of alkenes within the pore. Notably, the optimal pore geometry of the material enables selective accommodation of acetylene. The practical potential of this porous material has been demonstrated by fabricating mixed-matrix membranes comprising MFM-520, Matrimid and PIM-1, and these exhibit not only a high permeability for propylene (≈1984 Barrer), but also a separation factor of 7.8 for an equimolar mixture of propylene/propane at 298 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Valence : A Massively Parallel Implementation of the Variational Subspace Valence Bond Method

This work describes the software package, Valence, for the calculation of molecular energies using the variational subspace valence bond (VSVB) method. VSVB is an ab initio electronic structure method based on nonorthogonal orbitals. Important features of practical value include high parallel scalability, wave functions that can be constructed automatically by combining orbitals from previous calculations, and ground and excited states that can be modeled with a single configuration or determinant. Here, the open-source software package includes tools to generate wave functions, a database of generic orbitals, example input files, and a library build intended for integration with other packages. We also present the interface to an external software package, enabling the computation of optimized molecular geometries and vibrational frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Tl 2H 2 potential energy surface: A comparative analysis with group 13 systems and experiment

Abstract Thallium chemistry is experiencing unprecedented importance. Therefore, it is valuable to characterize some of the simplest thallium compounds. Stationary points along the singlet and triplet TlH potential energy surface have been characterized. Stationary point geometries were optimized with the CCSD(T)/aug‐cc‐pwCVQZ‐PP method. Harmonic vibrational frequencies were computed at the same level of theory while anharmonic vibrational frequencies were computed at the CCSD(T)/aug‐cc‐pwCVTZ‐PP level of theory. Final energetics were obtained with the CCSDT(Q) method. Basis sets up to augmented quintuple‐zeta cardinality (aug‐cc‐pwCV5Z‐PP) were employed to obtain energetics in order to extrapolate to the complete basis set limits using the focal point approach. Zero‐point vibrational energy corrections were appended to the extrapolated energies in order to determine relative energies at 0 K. It was found that the planar dibridged isomer lies lowest in energy while the linear structure lies highest in energy. The results were compared to other group 13 MH (M = B, Al, Ga, In, and Tl) theoretical studies and some interesting variations are found. With respect to experiment, incompatibilities exist.

Chemistry↗

3D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel 718

Additive manufacturing (AM) provides enormous processing flexibility, enabling novel part geometries and optimized designs. Access to a local heat source further permits the potential for local microstructure control on the scale of individual melt pools, which can enable local control of part properties. In order to design tailored processing strategies for target microstructures, models predicting the columnar-to-equiaxed transition must be extended to the high solidification velocities and complex thermal histories present in AM. Here, we combine 3D characterization with advanced modeling techniques to develop a more complete understanding of the solidification process and evolution of microstructure during electron beam melting (EBM) of Inconel 718. Full calibration of existing microstructure prediction models demonstrates the differences between AM processes and more conventional welding techniques, underlying the need for accurate determination of key parameters that can only be measured directly in 3D. The ability to combine multisensor data in a consistent 3D framework via data fusion algorithms is essential to fully leverage these advanced characterization approaches. Thermal modeling provides insight on microstructure development within isolated solidification events and demonstrates the role of Marangoni effects on controlling solidification behavior.

Polonsky, Andrew↗

Solid-State Joining of Thick-Section Dissimilar Materials using a New Friction Stir Dovetailing (FSD) Process

Solid-state joining of thick section aluminum to steel plate has been achieved using a new process called Friction Stir Dovetailing (FSD). In FSD, a custom designed pin tool is used to flow a lower melting point material (AA6061) into dovetail grooves machined into the surface of an underlying higher melting point material (Rolled Homogeneous Armor – RHA). Repeating dovetails form a mechanical interlocking structure akin to metallic Velcro. In this study, AA6061 sections ranging in thickness from 1.5” to 3.0” are joined to 0.5” thick RHA plates. The effectiveness of FSD is demonstrated through tensile test data which shows specimens failing in the processed aluminum rather than at the joint interface. Numerical simulations are presented which highlight the importance of optimizing dovetail geometry. The effect of process parameters on joint strength, microstructure, and hardness are also discussed.

dissimilar metals joining↗

Studies of NMR, molecular docking, and molecular dynamics simulation of new promising inhibitors of cruzaine from the parasite Trypanosoma cruzi

Cruzaine is the major cysteine protease of Trypanosoma cruzi. Cruzaine is involved throughout the parasite’s life cycle in host cells, and is a promising target in the search for new antichagasic agents. Quantum chemical calculations based on density functional theory (DFT B3LYP/cc-pVDZ) were performed to obtain nuclear magnetic resonance data and to optimize the geometry of four dihydrochalcones. The results showed good agreement with the experimental data and were used to suggest the relative stereochemistry of one of the four dihydrochalcones studied. In addition, we evaluated the interaction of cruzaine with these new inhibitors. We used molecular dynamics simulations, free energy calculations, and a per-residue energy decomposition method. It was observed that these molecules are capable of interacting with residues important for enzymatic activity, like Cys25, His161, and Asp160. The ranking of the inhibitors obtained from the binding free energy calculations is in agreement with that experimentally reported. The evaluation of the energy components involved in these calculations demonstrated that the van der Waals term is the major contributor to the drug–receptor stabilizing interactions.

60 APPLIED LIFE SCIENCES↗

Uncovering the mechanism of selective stabilization of high-energy diastereoisomers via inclusion

Abstract Supramolecular systems may be used to stabilize otherwise unstable isomers to find alternative synthetic pathways. It has been reported that cucurbit[8]uril can stabilize trans -I and trans -II Cu $$^{{\textrm{II}}}$$ II cyclam, whereas trans -III is the only non-substituted trans Cu $$^{{\textrm{II}}}$$ II cyclam diastereoisomer found outside of the host molecule experimentally. Quantum chemistry methods can provide valuable insight into the intermolecular interactions involved in these inclusion complexes. All five possible trans diastereoisomers of Cu $$^{{\textrm{II}}}$$ II cyclam were studied within the host molecule to calculate the interaction energy and free energy of association for each complex. The relative free energies of the five free cyclams confirm that trans -I and trans -II are the most energetically accessible diastereoisomers from the initial trans -III starting point. Energy decomposition analysis was used to identify the attractive and repulsive interactions between cyclam and cucurbit[8]uril and showed that trans -II encounters repulsive forces almost three times greater than trans -I, which may explain the 7:3 ratio of trans -I to trans -II within cucurbit[8]uril that occurs experimentally. Optimized complex geometries with trans -III, IV, and V show that the cyclams protrude out of cucurbit[8]uril, whereas trans -I and trans -II become more encapsulated and elongate the host, suggesting that the position of the cyclam is extremely important when forming non-covalent interactions. Our results agree with the experimental findings and provide greater insight into why the most stable isolated cyclam diastereoisomer, trans -III, does not form a complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Eddy Current Probe Parameters Identification Using a Genetic Algorithm and Simultaneous Perturbation Stochastic Approximation

This study tries to identify the coil parameters using numerical methods. The eddy current testing (ECT) is used for evaluation of a crack with the aid of numerical simulations by utilizing the identification of these parameters. In this study, a comparison of the performance of the GA and SPSA algorithms to identify the parameter values of the coil sensors are presented. So, the optimization probe geometry is introduced in the simulation with Three-dimensional finite element simulations (FLUX finite element code) were conducted to obtain eddy current signals resulting from a crack in a plate made of aluminium. The simulation results are compared with experimental measurements for the defect present in a plate.

42 ENGINEERING↗

Molecular design of D–A–D conjugated molecules based on fluorene for organic solar cells

The aim of this work is to search for new molecules with a photovoltaic performance for use in the field of organic solar cells. To achieve this goal, starting from a series of D–A–D bis-dipolar emissive oligoarylfluorenes and derivatives, the acceptor unit (A) is replaced by other different acceptors to improve their electronic optical and photovoltaic properties. The calculations were done using the B3LYP method with the base 6-31G(d,p) to optimize the geometry of the studied molecules and to determine the energies of HOMO, LUMO and band Gap. On the other hand, in order to study the electronic excitation spectra, the TD-B3LYP/6-31G (d,p) were used to calculate the absorption properties (λ{sub max}, OS). The results show that the designed molecules proposed here exhibit better performances including lower HOMO energy, a larger absorption range and better theoretical open circuit voltage (V{sub OC}). These compounds can be used as potential electron donors in organic solar cells Hetero-junction (BHJ), thanks to their better electronic and optical properties and good photovoltaic PV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-heat transfer lithium-ion batteries: A new era in battery thermal management

Despite advances in lithium-ion battery technology, critical challenges remain that must be addressed to accelerate electric vehicle (EV) adoption and global energy transformation. Significantly improved battery thermal management (BTM) is key to overcoming these challenges. BTM approaches focus on increasing heat transfer coefficients via air, liquid, or refrigerant cooling, but less attention is given to reducing the battery's thermal resistance, a major bottleneck for heat transfer. This work introduces a novel approach to reduce battery thermal resistance by integrating in-plane heat transfer with optimized cell geometry, minimized thermal resistances, and reduced interfacial resistances, representing a departure from previous methods. The standard prismatic can cell incorporating this technology is referred to as the high heat transfer (HHT) battery. An equivalent resistance battery thermal model is developed for speed and accuracy, validated against experimental data in the literature, demonstrating strong correlation and ensuring reliable predictions for real-world performance. Thermal performance metrics of the conventional and HHT batteries are compared using a parametric study with air, liquid, and refrigerant boundary conditions across a range of aspect ratios. The HHT battery shows a heat removal rate up to 20 times higher than a conventional battery. These findings suggest that HHT technology could be transformative for EV battery performance, enabling fast charging, mitigating thermal runaway, extending battery life, reducing cold-weather power loss, increasing reliability, lowering costs, and enabling higher energy density, all critical for EV adoption and energy transformation. Future work will focus on prototyping and real-world testing to refine these findings for commercial-scale applications.

25 ENERGY STORAGE↗