SEARCH · Search NASA

Results for “light shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Diode laser 87Rb optical pumping in an evacuated wall-coated cell

The evacuated wall coated sealed cell coupled with diode laser optical pumping offers a number of attractive potential advantages for use in Rb or Cs atomic frequency standards. An investigation of systematic effects is required to explore possible limitations of the technique. The use of diode laser optical pumping of 87 Rb in an evacuated wall coated sealed cell is presented. Experimental results/discussion to be presented include the signal strength and line broadening of the 0 - 0 hyperfine resonance as a function of light intensity for the D1 optical transitions (F - F prime) - (2 1 prime) and (2 - 2 prime), shift of the 0 - 0 hyperfine frequency as a function of laser intensity and de-tuning from optical resonance, and diode laser frequency stabilization techniques.

Lee, W. K.↗

NASA NTRS2002

Techniques for measurement of thoracoabdominal asynchrony

Respiratory motion measured by respiratory inductance plethysmography often deviates from the sinusoidal pattern assumed in the traditional Lissajous figure (loop) analysis used to determine thoraco-abdominal asynchrony, or phase angle phi. We investigated six different time-domain methods of measuring phi, using simulated data with sinusoidal and triangular waveforms, phase shifts of 0-135 degrees, and 10% noise. The techniques were then used on data from 11 lightly anesthetized rhesus monkeys (Macaca mulatta; 7.6 +/- 0.8 kg; 5.7 +/- 0.5 years old), instrumented with a respiratory inductive plethysmograph, and subjected to increasing levels of inspiratory resistive loading ranging from 5-1,000 cmH(2)O. L(-1). sec(-1).The best results were obtained from cross-correlation and maximum linear correlation, with errors less than approximately 5 degrees from the actual phase angle in the simulated data. The worst performance was produced by the loop analysis, which in some cases was in error by more than 30 degrees. Compared to correlation, other analysis techniques performed at an intermediate level. Maximum linear correlation and cross-correlation produced similar results on the data collected from monkeys (SD of the difference, 4.1 degrees ) but all other techniques had a high SD of the difference compared to the correlation techniques.We conclude that phase angles are best measured using cross-correlation or maximum linear correlation, techniques that are independent of waveform shape, and robust in the presence of noise. Copyright 2002 Wiley-Liss, Inc.

Non-NASA Center↗

NASA NTRS2003

Near-Infrared Spectra of Type Ia Supernovae

We report near-infrared (NIR) spectroscopic observations of 12 'branch-normal' Type Ia supernovae (SNe Ia) that cover the wavelength region from 0.8 to 2.5 microns. Our sample more than doubles the number of SNe Ia with published NIR spectra within 3 weeks of maximum light. The epochs of observation range from 13 days before maximum light to 18 days after maximum light. A detailed model for a Type Ia supernovae is used to identify spectral features. The Doppler shifts of lines are measured to obtain the velocity and thus the radial distribution of elements. The NIR is an extremely useful tool to probe the chemical structure in the layers of SNe Ia ejecta. This wavelength region is optimal for examining certain products of the SNe Ia explosion that may be blended or obscured in other spectral regions. We identify spectral features from Mg II, Ca II, Si II, Fe II, Co II, Ni II, and possibly Mn II. We find no indications for hydrogen, helium, or carbon in the spectra. The spectral features reveal important clues about the physical characteristics of SNe Ia. We use the features to derive upper limits for the amount of unburned matter, to identify the transition regions from explosive carbon to oxygen burning and from partial to complete silicon burning, and to estimate the level of mixing during and after the explosion. Elements synthesized in the outer layers during the explosion appear to remain in distinct layers. That provides strong evidence for the presence of a detonation phase during the explosion as it occurs in delayed detonation or merger models. Mg II velocities are found to exceed 11,000 - 15,000 km/s, depending on the individual SNe Ia. That result suggests that burning during the explosion reaches the outermost layers of the progenitor and limits the amount of unburned material to less than 10% of the mass of the progenitor. Small residuals of unburned material are predicted by delayed detonation models but are inconsistent with pure deflagration or merger models. Differences in the spectra of the individual SNe Ia demonstrate the variety of these events.

Marion, G. H.↗

NASA NTRS2013

Can the 62 Day X-ray Period of ULX M82 X-1 Be Due to a Precessing Accretion Disk?

We have analyzed all the archival RXTE/PCA monitoring observations of the ultraluminous X-ray source (ULX) M82 X-1 in order to study the properties of its previously discovered 62 day X-ray period (Kaaret & Feng 2007). Based on the high coherence of the modulation it has been argued that the observed period is the orbital period of the binary. Utilizing a much longer data set than in previous studies we find: (1) The phase-resolved X-ray (3-15 keV) energy spectra - modeled with a thermal accretion disk and a power-law corona - suggest that the accretion disk's contribution to the total flux is responsible for the overall periodic modulation while the power-law flux remains approximately constant with phase. (2) Suggestive evidence for a sudden phase shift-of approximately 0.3 in phase (20 days)-between the first and the second halves of the light curve separated by roughly 1000 days. If confirmed, the implied timescale to change the period is approx. = 10 yrs, which is exceptionally fast for an orbital phenomenon. These independent pieces of evidence are consistent with the 62 day period being due to a precessing accretion disk, similar to the so-called super-orbital periods observed in systems like Her X-1, LMC X-4, and SS433. However, the timing evidence for a change in the period needs to be confirmed with additional observations. This should be possible with further monitoring of M82 with instruments such as the X-ray telescope (XRT) on board Swift.

ULX M82↗

NASA NTRS2015

Modulated Sine Waves for Differential Absorption Measurements Using a CW Laser System

A continuous wave Light Detection and Ranging (CW LiDAR) system utilizes two or more laser frequencies and time or range shifted pseudorandom noise (PN) codes to discriminate between the laser frequencies. The performance of these codes can be improved by subtracting out the bias before processing. The CW LiDAR system may be mounted to an artificial satellite orbiting the earth, and the relative strength of the return signal for each frequency can be utilized to determine the concentration of selected gases or other substances in the atmosphere.

Campbell, Joel F.↗

NASA NTRSDate not supplied

DLES Unreal Simulation Tool (DUST)

NASA’s future Artemis missions to the Moon seek to explore areas around the Lunar South Pole. Though humans have previously set foot on the lunar surface, the proposed region provides unique and challenging environments that require insight and investigation prior to arrival. Several teams throughout the agency are performing this site and mission planning, design, and analysis to support areas like the Human Landing System (HLS), surface mobility, habitation elements, and scientific exploration. The NASA Exploration Systems Simulation (NExSyS) team at Johnson Space Center is developing a graphical environment of the Lunar South Pole region. Lunar terrain information collected from the Lunar Reconnaissance Orbiter (LRO) is compiled and made available through Johnson Space Center’s Digital Lunar Exploration Sites (DLES) data sets. The DLES data is used to build this graphic environment. The process of ingesting and accurately modeling this information in a meaningful way for analysis creates its own challenges such as generating a performant model from the source data and the application of curvature. Additionally, the area around the Lunar South Pole experiences different lighting conditions than those observed from the Apollo missions. The need to use the lunar environmental data products provided by DLES combined with the capability to calculate date specific ephemerides in real-time has given rise to the development of the DLES Unreal Simulation Tool (DUST). DUST incorporates augmented terrain from the DLES product into a desktop application that allows exploration of the Lunar South Pole region and its complex lighting conditions. DUST leverages advanced capabilities in the recently released Unreal Engine 5 renderer by Epic Games such as double precision for positioning of planetary bodies and surface elements, multiple infinite light sources to represent the Sun and eventually Earthshine, high resolution shadow maps for dynamic shadow accuracy, real-time software ray-tracing for multi-surface bounce lighting to render sunlight reflected off surface elements and terrain features, and performance optimized level of detail shifting as the eyepoint changes in a scene. This paper details the DUST application, the technologies of the engine platform that enable scientific and engineering analysis, the unique techniques and processes developed to consume the DLES data sets, and how the tool is being used to support the Artemis program.

Lunar Visualization↗

DOE OSTI2021

Pigment modulation in response to irradiance intensity in the fast-growing alga Picochlorum celeri

Picochlorum celeri has among the fastest photoautotrophic growth rates (~2 h doubling time in optimal conditions) reported to date for a marine alga. This study comprehensively analyzes the levels of Picochlorum celeri photosynthetic pigments, which can reach up to ~13% of the total particulate organic carbon (POC) under light-limiting conditions. The main Picochlorum celeri pigments identified include: chlorophyll a, chlorophyll b, lutein, β-carotene, canthaxanthin, violaxanthin, neoxanthin, zeaxanthin and antheraxanthin. The ketocarotenoid canthaxanthin can accumulate up to 120 mg L -1 in Picochlorum celeri liquid culture; ~12% of it was found in an extracellular polysaccharide matrix. Using a solar-simulating automated photobioreactor, we monitor the photoacclimation of cultures maintained in unshaded conditions (<0.5 μg mL -1 of total chlorophyll) through transitions from high irradiance (1000 μmoles photosynthetically active radiation (PAR) m -2 s -1 ) to low irradiance (60 μmoles PAR m -2 s -1 ), and conversely from low to high irradiance. Canthaxanthin and zeaxanthin accumulation are among the most rapid modulation responses when cultures are shifted from low to high irradiance. The violaxanthin, antherazanthin, and zeaxanthin (VAZ) pool is ~3-fold higher in high-light cultures, suggesting that the VAZ cycle combined with a dramatic reduction in chlorophyll levels are among the major mechanisms used in Picochlorum celeri to efficiently acclimate to high-irradiance levels. Responsive pigment modulation was also observed in denser cultures (~0.65 g L –1 ) grown under a diel cycle (pond-mimicking conditions). Furthermore, this research provides unique insights into the dynamics of pigment modulation and photoacclimation in response to changing irradiance in a biotechnologically promising alga and will inform future pigment engineering strategies to further improve light capture and biomass accumulation.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1976

Shift measurements of the stark-broadened ionized helium lines at 1640 and 1215 angstrom

Time-resolved measurements were made of the shifts of the ionized helium lines at 1,640 A (n = 3 approaches 2) and 1,215 A (n = 4 approaches 2), and of the Stark profile of the 1,215 A wavelength line. An electromagnetic shock tube was used as a light source. The plasma conditions corresponded to electron temperatures of approximately 3.5 eV and electron densities of 0.8 to 1.8 x 10 to the 17th power/cubic cm. The measured shifts fell between two previous estimates of plasma polarization shifts. The measured Stark width of the 1,215 A wavelength line was up to 30% greater than the theoretical width.

Vanzandt, J. R.↗

DOE OSTI2022

XMM-Newton and TESS observations of the highly variable polar V496 UMa

We studied the temporal and spectral behavior of V496 UMa from the optical to the X-ray regimes. Methods. We used archival XMM-Newton and TESS observations obtained in 2017 and 2019, respectively, to perform a spectral and timing analysis of the highly variable magnetic CV. Results. The light curves of the TESS and XMM-Newton satellites reveal a double-humped pattern modulated with the periodicity of 91.058467 ± 0.00001 min. V496 UMa displays a two-pole accretion geometry in the high accretion state. X-ray spectra from these regions are composed of thermal plasma radiation and soft blackbody components with almost identical temperatures and a total accretion rate of $\dot{M}$ = 1.4(8) × 10 -11 M ⊙ yr -1 . The X-ray centers of the humps show longitudinal shifts of -18° and 4°, and shifts around photometric phase zero of -172° and -186°, for the main hump and second hump, respectively. The long-term ZTF light curves reveal high and low accretions states. Low-state ZTF and SDSS photometric data are consistent with an 0.8 M ⊙ white dwarf at 10 000 K and a main-sequence donor star with a spectral type of M5.0 at a Gaia determined distance of 758 pc. Conclusions. V496 UMa is a very bright polar in X-rays when it is in the high state. Due to its unusual geometric structure, mass accretion onto the second accretion pole is interrupted occasionally. This discontinuous behavior does not follow a certain pattern in time and has been observed so far only in the high state. The X-ray light curves display clear evidence of an accretion stream at the photometric phase of φ = 0.81, which does not show up in optical light curves. An accurate period was derived using the combined TESS and XMM-Newton data, which differs by 3.8 σ from published results.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Development of light-responsive protein binding in the monobody non-immunoglobulin scaffold

Abstract Monobodies are synthetic non-immunoglobulin customizable protein binders invaluable to basic and applied research, and of considerable potential as future therapeutics and diagnostic tools. The ability to reversibly control their binding activity to their targets on demand would significantly expand their applications in biotechnology, medicine, and research. Here we present, as proof-of-principle, the development of a light-controlled monobody (OptoMB) that works in vitro and in cells and whose affinity for its SH2-domain target exhibits a 330-fold shift in binding affinity upon illumination. We demonstrate that our αSH2-OptoMB can be used to purify SH2-tagged proteins directly from crude E. coli extract, achieving 99.8% purity and over 40% yield in a single purification step. By virtue of their ability to be designed to bind any protein of interest, OptoMBs have the potential to find new powerful applications as light-switchable binders of untagged proteins with the temporal and spatial precision afforded by light.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Cosmological constraints on light but massive relics

Many scenarios of physics beyond the standard model predict new light, weakly coupled degrees of freedom, populated in the early universe and remaining as cosmic relics today. Due to their high abundances, these relics can significantly affect the evolution of the universe. For instance, massless relics produce a shift ΔN eff to the cosmic expectation of the effective number of active neutrinos. Massive relics, on the other hand, additionally become part of the cosmological dark matter in the later universe, though their light nature allows them to freely stream out of potential wells. This produces novel signatures in the large-scale structure (LSS) of the universe, suppressing matter fluctuations at small scales. Here, we present the first general search for such light (but massive) relics (LiMRs) with cosmic microwave background (CMB) and LSS data, scanning the 2D parameter space of their masses m X and temperatures $T^{(0)}_{X}$ today. In the conservative minimum-temperature ($T^{(0)}_{X}$ = 0.91 K) scenario, we rule out Weyl (and higher-spin) fermions -- such as the gravitino -- with m X ≥ 2.26 eV at 95% C.L., and set analogous limits of m X ≤ 11.2,1.06,1.56 eV for scalar, vector, and Dirac-fermion relics. This is the first search for LiMRs with joint CMB, weak-lensing, and full-shape galaxy data; we demonstrate that weak-lensing data is critical for breaking parameter degeneracies, while full-shape information presents a significant boost in constraining power relative to analyses with only baryon acoustic oscillation parameters. Under the combined strength of these datasets, our constraints are the tightest and most comprehensive to date.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1989

Mutants of Arabidopsis thaliana with altered phototropism

Thirty five strains of Arabidopsis thaliana (L.) Heynh. have been identified with altered phototropic responses to 450-nm light. Four of these mutants have been more thoroughly characterized. Strain JK224 shows normal gravitropism and "second positive" phototropism. However, while the amplitude for "first positive" phototropism is the same as that in the wild-type, the threshold and fluence for the maximum response in "first positive" phototropism are shifted to higher fluence by a factor of 20-30. This mutant may represent an alteration in the photoreceptor pigment for phototropism. Strain JK218 exhibits no curvature to light at any fluence from 1 micromole m-2 to 2700 micromoles m-2, but shows normal gravitropism. Strain JK345 shows no "first positive" phototropism, and reduced gravitropism and "second positive" phototropism. Strain JK229 shows no measurable "first positive" phototropism, but normal gravitropism and "second positive" phototropism. Based on these data, it is suggested that: 1. gravitropism and phototropism contain at least one common element; 2. "first positive" and "second positive" phototropism contain at least one common element; and 3. "first positive" phototropism can be substantially altered without any apparent alteration of "second positive" phototropism.

NASA Discipline Plant Biology↗

DOE OSTI2022

MEP pathway products allosterically promote monomerization of deoxy-D-xylulose-5-phosphate synthase to feedback-regulate their supply

Isoprenoids are a very large and diverse family of metabolites required by all living organisms. All isoprenoids derive from the double-bond isomers isopentenyl diphosphate (IPP) and dimethylallyl diphosphate (DMAPP), which are produced by the methylerythritol 4-phosphate (MEP) pathway in bacteria and plant plastids. It has been reported that IPP and DMAPP feedback-regulate the activity of deoxyxylulose 5-phosphate synthase (DXS), a dimeric enzyme that catalyzes the main flux-controlling step of the MEP pathway. Here we provide experimental insights into the underlying mechanism. Isothermal titration calorimetry and dynamic light scattering approaches showed that IPP and DMAPP can allosterically bind to DXS in vitro, causing a size shift. In silico ligand binding site analysis and docking calculations identified a potential allosteric site in the contact region between the two monomers of the active DXS dimer. Modulation of IPP and DMAPP contents in vivo followed by immunoblot analyses confirmed that high IPP/DMAPP levels resulted in monomerization and eventual aggregation of the enzyme in bacterial and plant cells. Loss of the enzymatically active dimeric conformation allows a fast and reversible reduction of DXS activity in response to a sudden increase or decrease in IPP/DMAPP supply, whereas aggregation and subsequent removal of monomers that would otherwise be available for dimerization appears to be a more drastic response in the case of persistent IPP/DMAPP overabundance (e.g., by a blockage in their conversion to downstream isoprenoids). Our results represent an important step toward understanding the regulation of the MEP pathway and rational design of biotechnological endeavors aimed at increasing isoprenoid contents in microbial and plant systems.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Climate Impacts of Convective Cloud Microphysics in NCAR CAM5

Here we improved the treatments of convective cloud microphysics in the NCAR Community Atmosphere Model version 5.3 (CAM5.3) by 1) implementing new terminal velocity parameterizations for convective ice and snow particles, 2) adding graupel microphysics, 3) considering convective snow detrainment, and 4) enhancing rain initiation and generation rate in warm clouds. Furthermore, we evaluated the impacts of improved microphysics on simulated global climate, focusing on simulated cloud radiative forcing, graupel microphysics, convective cloud ice amount, and tropical precipitation. Compared to CAM5.3 with the default convective microphysics, the too-strong cloud shortwave radiative forcing due primarily to excessive convective cloud liquid is largely alleviated over the tropics and midlatitudes after rain initiation and generation rate is enhanced, in better agreement with the CERES-EBAF estimates. Geographic distributions of graupel occurrence are reasonably simulated over continents; whereas the graupel occurrence remains highly uncertain over the oceanic storm-track regions. When evaluated against the CloudSat–CALIPSO estimates, the overestimation of convective ice mass is alleviated with the improved convective ice microphysics, among which adding graupel microphysics and the accompanying increase in hydrometeor fall speed play the most important role. The probability distribution function (PDF) of rainfall intensity is sensitive to warm rain processes in convective clouds, and enhancement in warm rain production shifts the PDF toward heavier precipitation, which agrees better with the TRMM observations. Common biases of overestimating the light rain frequency and underestimating the heavy rain frequency in GCMs are mitigated.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1995

Stress Tuning of Laser Crystals

The topic of stress tunable laser crystals is addressed in this study with the purpose of determining the piezo-optic coefficients of a new laser material. This data was collected using a quadruple pass birefringence technique because of its high degree of sensitivity relative to the other methods examined including fringe shift analysis using a Mach-Zender interferometer. A green He-Ne laser was passed through a light chopper and Glan-Thompson prism before entering a crystal of Erbium doped Yttrium Aluminum Garnet (Er:YAG) (used in order to validate the experimental technique). The Er:YAG crystal is mounted in a press mechanism and the laser is quadruple passed through test specimen before being returned through the prism and the orthogonally polarized portion of the beam measured with a optical sensor. At a later stage, the Er:YAG crystal was replaced with a new crystal in order to determine the piezo-optic coefficients of this uncharacterized material. The applied load was monitored with the use of a 50 lb. load cell placed in line with the press. Light transmission readings were taken using a lock-in amplifier while load cell measurements were taken with a voltmeter from a 5 volt, 0.5 amp power supply. Despite the fact that an effective crystal press damping system was developed, size limitations precluded the use of the complete system. For this reason, data points were taken only once per full turn so as to minimize the effect of non uniform load application on the collected data. Good correlation was found in the transmission data between the experimentally determined Er:YAG and the previously known peizo-optic constants of non-doped crystal with which it was compared. The variation which was found between the two could be accounted for by the aforementioned presence of Erbium in the experimental sample (for which exact empirical data was not known). The same test procedure was then carried out on a Yttrium Gallium Aluminum garnet (YGAG) for the purpose of establishing values of its unknown piezo-optic constant tensor using experimentally collected transmission data. Significant variation between the piezo-optic constants of YAG and YGAG crystals was found however, the excellent data correlation of separate experimental runs carried out on the YGAG sample demonstrates the validity of these results. The data collected during the stressing of the YGAG was of high quality, however the amount of data collected was somewhat limited by a fracture of YGAG specimen which undoubted altered the crystalline lattice structure and hence precluded any further testing.

Carty, Atherton A.↗

NASA NTRS2002

Fiber-Optic Pressure Sensor With Dynamic Demodulation Developed

Researchers at the NASA Glenn Research Center developed in-house a method to detect pressure fluctuations using a fiber-optic sensor and dynamic signal processing. This work was in support of the Intelligent Systems Controls and Operations project under NASA's Information Technology Base Research Program. We constructed an optical pressure sensor by attaching a fiber-optic Bragg grating to a flexible membrane and then adhering the membrane to one end of a small cylinder. The other end of the cylinder was left open and exposed to pressure variations from a pulsed air jet. These pressure variations flexed the membrane, inducing a strain in the fiber-optic grating. This strain was read out optically with a dynamic spectrometer to record changes in the wavelength of light reflected from the grating. The dynamic spectrometer was built in-house to detect very small wavelength shifts induced by the pressure fluctuations. The spectrometer is an unbalanced interferometer specifically designed for maximum sensitivity to wavelength shifts. An optimum pathlength difference, which was determined empirically, resulted in a 14-percent sensitivity improvement over theoretically predicted path-length differences. This difference is suspected to be from uncertainty about the spectral power difference of the signal reflected from the Bragg grating. The figure shows the output of the dynamic spectrometer as the sensor was exposed to a nominally 2-kPa peak-to-peak square-wave pressure fluctuation. Good tracking, sensitivity, and signal-to-noise ratios are evident even though the sensor was constructed as a proof-of-concept and was not optimized in any way. Therefore the fiber-optic Bragg grating, which is normally considered a good candidate as a strain or temperature sensor, also has been shown to be a good candidate for a dynamic pressure sensor.

Lekki, John D.↗

DOE OSTI2024

Photochemical phosphorus-enabled scaffold remodeling of carboxylic acids

The excitation of carbonyl compounds by light to generate radical intermediates has historically been restricted to ketones and aldehydes; carboxylic acids have been overlooked because of high energy requirements and low quantum efficiency. A successful activation strategy would necessitate a bathochromic shift in the absorbance profile, an increase in triplet diradical lifetime, and ease of further functionalization. We present a single-flask transformation of carboxylic acids to acyl phosphonates that can access synthetically useful triplet diradicals under visible light or near-ultraviolet irradiation. The use of phosphorus circumvents unproductive Norrish type I processes, promoting selectivity that enables hydrogen-atom transfer reactivity. Use of this strategy promotes the efficient scaffold remodeling of carboxylic acids through various annulation, contraction, and expansion manifolds.

Science & Technology - Other Topics↗

DOE OSTI2025

Multi-Omics Reveals Temporal Scales of Carbon Metabolism in Synechococcus Elongatus PCC 7942 Under Light Disturbance

Central carbon metabolism in model cyanobacteria involves multiple pathways to adapt to energy-light limitations across diel cycles. However, the success in mechanistic modeling for phenotypic prediction of the protein regulators in the metabolic state depends on capturing the vast possibilities emerging from multiple regulatory pathways in complex biological processes. Here, we developed a physics-informed machine learning approach based on energy-landscape concepts to predict regulatory proteins responding to cyclic circadian and unforeseen light perturbations in cyanobacterial metabolic networks. Our approach provides interpretable de novo models for inferring gene expression dynamics from Synechococcus elongatus over diel cycles and using redox proteome analysis to distinguish immediate light-responsive elements from circadian-regulated processes in carbon metabolism pathways. We identified distinct temporal signatures with the analysis of the redox proteome: there was an immediate shift in cysteine redox states accompanied by a limited change in protein abundance under constant illumination and after 2 hours of darkness. This discovery indicates that the generation of reductants coordinates photoinduced electron transport with redox metabolic pathways in two discernable molecular mechanisms: fast redox-based protein modifications occur immediately after the light disturbance, followed by slow transcriptional regulations across networks. This temporal regulation reveals how metabolic networks integrate rapid light responses with programmed circadian rhythms to maintain cellular homeostasis under the light-energy limitations over the diel cycle.

Biomolecular & subcellular processes↗