Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix completion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Dissolution of aerosol particles collected from nuclear facility plutonium production process

Here, a simple, robust analytical chemistry method has been developed to dissolve plutonium containing particles in a complex matrix. The aerosol particles collected on Marple cascade impactor substrates were shown to be dissolved completely with an acid mixture of 12 M HNO 3 and 0.1 M HF. A pressurized closed vessel acid digestion technique was utilized to heat the samples at 130 °C for 16 h to facilitate the digestion. The dissolution efficiency for plutonium particles was 99 %. The resulting particle digestate solution was suitable for trace elemental analysis and isotope composition determination, as well as radiochemistry measurements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of Selective Laser Melted Inconel 718 Alloy

The microstructure characteristics of the selective laser melted Inconel 718 alloy under as-deposited, homogenization + solution + aging (HSA) and solution + aging (SA) conditions were studied. The anisotropy and heterogeneity of mechanical properties under different conditions were also investigated. Under the as-deposited condition, the morphology and size of the grains are heterogeneous. The dendrite structures which grow nearly perpendicular to the molten pool traces, accompanying interdendritic Laves phase, can be observed within the grains. The dendrite structure completely disappeared, and the Laves phases embedded in the interdendritic regions also dissolved into the matrix to precipitate γ′ and γ″ phases after heat treatments. Fully recrystallized grains were obtained under the HSA condition, while only incomplete recrystallized grains were obtained under the SA condition. However, the characteristics of γ′ and γ″ phases are very similar under the HSA and SA conditions. Significant improvement in strength after heat treatments was due to the dissolution of undesirable Laves phase and the precipitation of γ′ and γ″ phases. For all the three conditions, different tensile properties were observed depending on the orientation of the specimens. The scatter of mechanical properties is notable, and heat treatments increased the scatter of mechanical properties.

36 MATERIALS SCIENCE↗

Detection of preferential particle orientation in the atmosphere. Development of an alternative polarization lidar system

Increasing interest in polarimetric characterization of atmospheric aerosols has led to the development of complete sample-measuring (Mueller) polarimeters that are capable of measuring the entire backscattering phase matrix of a probed volume. The Mueller polarimeters consist of several moving parts, which limit measurement rates and complicate data analysis. In this paper, we present the concept of a less complex polarization lidar setup for detection of preferential orientation of atmospheric particulates. On the basis of theoretical considerations of data inversion stability and propagation of measurement uncertainties, an optimum optical configuration is established for two modes of operation (with either a linear or a circular polarized incident laser beam). We discovered that the conceptualized setup falls in the category of incomplete sample-measuring polarimeters and uses four detection channels for simultaneous measurement of the backscattered light. Likewise, the expected performance characteristics are discussed through an example of a typical aerosol with a small fraction of particles oriented in a preferred direction. As a result, the theoretical analysis suggests that achievable accuracies in backscatter cross-sections and depolarization ratios are similar to those with conventional two-channel configurations, while in addition preferential orientation can be detected with the proposed four-channel system for a wide range of conditions.

43 PARTICLE ACCELERATORS↗

Local Excitations of a Charged Nitrogen Vacancy in Diamond with Multireference Density Matrix Embedding Theory

Here, we investigate the negatively charged nitrogen-vacancy center in diamond using periodic density matrix embedding theory (pDMET). To describe the strongly correlated excited states of this system, the complete active space self-consistent field (CASSCF) followed by n-electron valence state second-order perturbation theory (NEVPT2) was used as the impurity solver. Since the NEVPT2-DMET energies show a linear dependence on the inverse of the size of the embedding subspace, we performed an extrapolation of the excitation energies to the nonembedding limit using a linear regression. The extrapolated NEVPT2-DMET first triplet–triplet excitation energy is 2.31 eV and that for the optically inactive singlet–singlet transition is 1.02 eV, both in agreement with the experimentally observed vertical excitation energies of ∼2.18 eV and ∼1.26 eV, respectively. This is the first application of pDMET to a charged periodic system and the first investigation of the NV – defect using NEVPT2 for periodic supercell models.

36 MATERIALS SCIENCE↗

Integrable multistate Landau–Zener models with parallel energy levels

In this paper, we discuss solvable multistate Landau–Zener (MLZ) models whose Hamiltonians have commuting partner operators with ~1/τ-time-dependent parameters. Many already known solvable MLZ models belong precisely to this class. We derive the integrability conditions on the parameters of such commuting operators, and demonstrate how to use such conditions in order to derive new solvable cases. We show that MLZ models from this class must contain bands of parallel diabatic energy levels. The structure of the scattering matrix and other properties are found to be the same as in the previously discussed completely solvable MLZ Hamiltonians.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kaon mixing beyond the standard model with physical masses

We present nonperturbative results for beyond the standard model kaon mixing matrix elements in the isospin symmetric limit ( m u = m d ) of QCD, including a complete estimate of all dominant sources of systematic error. Our results are obtained from numerical simulations of lattice QCD with N f = 2 + 1 flavors of dynamical domain wall fermions. For the first time, these quantities are simulated directly at the physical pion mass m π ∼ 139 MeV for two different lattice spacings. We include data at three lattice spacings in the range a = 0.11 – 0.07 fm and with pion masses ranging from the physical value up to 450 MeV. Compared to our earlier work, we have added both direct calculations at physical quark masses and a third lattice spacing making the removal of discretization effects significantly more precise and eliminating the need for any significant mass extrapolation beyond the range of simulated data. We renormalize the lattice operators nonperturbatively using RI-SMOM off-shell schemes. These schemes eliminate the need to model and subtract nonperturbative pion poles that arises in the RI-MOM scheme and, since the calculations are performed with domain wall fermions, the unphysical mixing between chirality sectors is suppressed. Our results for the bag parameters in the MS ¯ scheme at 3 GeV are B K ≡ B 1 = 0.5240 ( 17 ) ( 54 ) , B 2 = 0.4794 ( 25 ) ( 35 ) , B 3 = 0.746 ( 13 ) ( 17 ) , B 4 = 0.897 ( 02 ) ( 10 ) and B 5 = 0.6882 ( 78 ) ( 94 ) , where the first error is from lattice uncertainties and the second is the uncertainty due to the perturbative matching to MS ¯ . Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

One vanishing minor in the neutrino mass matrix

We study a specific texture of the neutrino mass matrix, namely the models with one 2x2 subdeterminant equal to zero. We carry out a complete phenomenological analysis with all possible relevant correlations. Every pattern of the six possible ones is found able to accommodate the experimental data, with three cases allowing also for noninvertible mass matrices. We present symmetry realizations for all the models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two-Loop Divergences of QCD Scattering Amplitudes with Massive Partons

We provide a complete description of the two-loop infrared singularities of scattering amplitudes with an arbitrary number of massive and massless partons in non-Abelian gauge theories. To this end, we calculate the two universal functions that completely specify the structure of three-parton correlations in the soft anomalous-dimension matrix at two-loop order in closed analytic form. Both functions are found to be suppressed like O(m{sup 4}/s{sup 2}) in the limit of small parton masses, in accordance with mass factorization theorems. On the other hand, they are unsuppressed near the threshold for pair production of two heavy particles. As an application, we calculate the two-loop anomalous-dimension matrix for qq->tt near threshold and show that it is not diagonal in the s-channel singlet-octet basis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the Formation of IR-Light-Emitting Ge Nanocrystals in Ge:SiO{sub 2} Films

The study is concerned with light-emitting Ge nanocrystals formed during the annealing of Ge{sub x}[SiO{sub 2}]{sub 1–x} films produced by the high-vacuum cosputtering of germanium and quartz targets onto substrates at a temperature of 100°C. In accordance with the conditions of growth, the Ge molar fraction was varied from 10 to 40%. By means of electron microscopy and Raman spectroscopy, amorphous Ge nanoclusters ~4–5 nm in dimensions are detected in as-deposited films with a Ge content higher than 20 mol %. To crystallize amorphous nanoclusters, annealing at temperatures of up to 650°C is used. The kinetics of the crystallization of Ge nanoclusters is studied, and it is established that up to ~1/3 of the amorphous phase is retained in the system, supposedly at the interfaces between nanocrystals and the surrounding amorphous SiO{sub 2} matrix. It is found that, upon annealing in normal atmosphere, germanium nanoclusters are partially or completely oxidized (at a Ge molar fraction of 30% and smaller). An intense infrared photoluminescence signal from quantum-confined Ge nanocrystals and a visible photoluminescence signal defined by defect complexes (oxygen vacancy + excess Ge atoms) are observed.

36 MATERIALS SCIENCE↗

Radiation in the earth's atmosphere - Its radiance, polarization, and ellipticity

A matrix operator method for a model of the real atmosphere is used to calculate the complete radiation field of the atmosphere. The radiance, direction and amount of polarization, and ellipticity are obtained at the top and bottom of the atmosphere for three values of the surface albedo (0, 0.15, 0.90) and five solar zenith angles, taking account of molecular absorption and scattering (including by ozone) together with the variation of the density of these molecules with height.

Hitzfelder, S. J.↗

Application of polynomial techniques to multivariable control of jet engines

This paper describes a complete case study of the application of the theory of minimal design to multivariable control of jet engines. The minimal-design problem is approached from the viewpoint of polynomial modules, and computational experience with PL/I and FORMAC-PL/I software is discussed. The complete minimal-design solution exhibits flexibilities not apparent in early industry studies, and a matrix approach to pole assignment can be used to advantage in this situation.

Gejji, R. R.↗

Application of Ritz vectors for dynamic analysis of large structures

The use of an orthogonal set of specially selected Ritz vectors is shown to be very effective in reducing the cost of dynamic analysis by modal superposition. Several mechanical structures are examined, and the Ritz vector approach is compared to the classical eigenvector approach on the basis of cost, accuracy and elapsed analysis (throughput) time. Mathematical proof of the completeness of orthogonal Ritz vectors is provided for the case of a positive definite mass matrix and a symmetric stiffness matrix.

Arnold, R. R.↗

Application of a sensitivity analysis technique to high-order digital flight control systems

A sensitivity analysis technique for multiloop flight control systems is studied. This technique uses the scaled singular values of the return difference matrix as a measure of the relative stability of a control system. It then uses the gradients of these singular values with respect to system and controller parameters to judge sensitivity. The sensitivity analysis technique is first reviewed; then it is extended to include digital systems, through the derivation of singular-value gradient equations. Gradients with respect to parameters which do not appear explicitly as control-system matrix elements are also derived, so that high-order systems can be studied. A complete review of the integrated technique is given by way of a simple example: the inverted pendulum problem. The technique is then demonstrated on the X-29 control laws. Results show linear models of real systems can be analyzed by this sensitivity technique, if it is applied with care. A computer program called SVA was written to accomplish the singular-value sensitivity analysis techniques. Thus computational methods and considerations form an integral part of many of the discussions. A user's guide to the program is included. The SVA is a fully public domain program, running on the NASA/Dryden Elxsi computer.

Paduano, James D.↗

A hybrid-stress finite element for linear anisotropic elasticity

Standard assumed displacement finite elements with anisotropic material properties perform poorly in complex stress fields such as combined bending and shear and combined bending and torsion. A set of three dimensional hybrid-stress brick elements were developed with fully anisotropic material properties. Both eight-node and twenty-node bricks were developed based on the symmetry group theory of Punch and Atluri. An eight-node brick was also developed using complete polynomials and stress basis functions and reducing the order of the resulting stress parameter matrix by applying equilibrium constraints and stress compatibility constraints. Here the stress compatibility constraints must be formulated assuming anisotropic material properties. The performance of these elements was examined in numerical examples covering a broad range of stress distributions. The stress predictions show significant improvement over the assumed displacement elements but the calculation time is increased.

Fly, Gerald W.↗

Mechanical behaviors of ceramic matrix composites with matrix cracking and fiber debonding

The purpose of this paper is to summarize the current research of the authors on the mechanical behaviors of ceramic matrix composites, including (1) the stress distributions in a composite with matrix cracking and interfacial debonding, (2) the critical strain for matrix cracking, and (3) the effects of fiber/matrix debonding and thermal residual stresses on the critical strain. The stress fields in both bonded and debonded regions are evaluated by taking into account thermal effects. An energy balance approach is followed to determine the critical strain for matrix cracking. From the general equation of the critical strain for matrix cracking, close form solutions have been obtained for two limiting cases: perfect bonding and complete debonding. Numerical solutions are given for the cases of partial fiber debonding and nonzero debonding energy. It is found that thermal residual stresses and the debonding energy have significant effects on the critical strain.

Kuo, Wen-Shyong↗

The Influence of SiC on the Ablation Response of Advanced Refractory Composite Materials

In continuing our studies of advanced refractory composite materials we have recently completed an arc-jet test series of a diverse group of ceramics and ceramic matrix composites. The compositions range from continuous fiber reinforced ceramics to monoliths. Many of these materials contain SiC and one objective of this test series was to identify the influence of SiC oxidation mechanisms on material performance. Hence the arc heater was operated at two conditions; one in which the passive oxidation of SiC would be dominant and the other where the active oxidation of SiC would be dominant. It is shown here that the active oxidation mechanism of SiC does not dominate material performance when it is present at levels equal to or below 20 volume percent.

Bull, Jeffrey D.↗

Handling Qualities of a Large Civil Tiltrotor in Hover using Translational Rate Command

A Translational Rate Command (TRC) control law has been developed to enable low speed maneuvering of a large civil tiltrotor with minimal pitch changes by means of automatic nacelle angle deflections for longitudinal velocity control. The nacelle actuator bandwidth required to achieve Level 1 handling qualities in hover and the feasibility of additional longitudinal cyclic control to augment low bandwidth nacelle actuation were investigated. A frequency-domain handling qualities criterion characterizing TRC response in terms of bandwidth and phase delay was proposed and validated against a piloted simulation conducted on the NASA-Ames Vertical Motion Simulator. Seven experimental test pilots completed evaluations in the ADS-33E-PRF Hover Mission Task Element (MTE) for a matrix of nacelle actuator bandwidths, equivalent rise times and control response sensitivities, and longitudinal cyclic control allocations. Evaluated against this task, longitudinal phase delay shows the Level 1 boundary is around 0.4 0.5 s. Accordingly, Level 1 handling qualities were achieved either with a nacelle actuator bandwidth greater than 4 rad/s, or by employing longitudinal cyclic control to augment low bandwidth nacelle actuation.

Malpica, Carlos A.↗