Search NASA⌕ Search

SEARCH · Search NASA

Results for “methane emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Adaptive evolution of Methylotuvimicrobium alcaliphilum to grow in the presence of rhamnolipids improves fatty acid and rhamnolipid production from CH4

Abstract Rhamnolipids (RLs) are well-studied biosurfactants naturally produced by pathogenic strains of Pseudomonas aeruginosa. Current methods to produce RLs in native and heterologous hosts have focused on carbohydrates as production substrate; however, methane (CH4) provides an intriguing alternative as a substrate for RL production because it is low cost and may mitigate greenhouse gas emissions. Here, we demonstrate RL production from CH4 by Methylotuvimicrobium alcaliphilum DSM19304. RLs are inhibitory to M. alcaliphilum growth (<0.05 g/l). Adaptive laboratory evolution was performed by growing M. alcaliphilum in increasing concentrations of RLs, producing a strain that grew in the presence of 5 g/l of RLs. Metabolomics and proteomics of the adapted strain grown on CH4 in the absence of RLs revealed metabolic changes, increase in fatty acid production and secretion, alterations in gluconeogenesis, and increased secretion of lactate and osmolyte products compared with the parent strain. Expression of plasmid-borne RL production genes in the parent M. alcaliphilum strain resulted in cessation of growth and cell death. In contrast, the adapted strain transformed with the RL production genes showed no growth inhibition and produced up to 1 μM of RLs, a 600-fold increase compared with the parent strain, solely from CH4. This work has promise for developing technologies to produce fatty acid-derived bioproducts, including biosurfactants, from CH4.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Greenhouse gas flux response in biochar- and compost-amended urban soils under simulated soil hydrologic dynamics

Understanding greenhouse gas emission dynamics in lawn soils is essential for improving climate change mitigation strategies in urban and suburban environments. This project measured fluxes of carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O) fluxes from turfgrass soil columns amended with biochar, compost, biochar-compost blend, control (no amendment) in a controlled greenhouse mesocosm experiment. This project simulated contrasting water saturation regimes consisting of normal irrigation with sprinkler, transient half or full saturation by water table manipulation, and subsequent drying phase under both sod or seeded grass conditions. Compost-amended columns (compost or biochar-compost blend) exhibited higher average CO 2 fluxes (6 µmol m-2 s-1) compared to biochar or control columns (4.5 – 5.0 µmol m-2 s-1) across all saturation levels under sod conditions. Seeded grass conditions generally resulted in less CO 2 emissions. The CO 2 fluxes were positively correlated with air temperature and negatively correlated with soil moisture. Biochar-amended columns retained high soil moisture (~95 %) throughout experiments, demonstrating superior moisture retention compared to compost. CH 4 and N 2 O fluxes exhibited temporal increases (5-8 nmol m-2 s-1) during saturation and drainage phases, indicating their sensitivity to hydrologic conditions. These findings suggest that temperature and amendment types are primary driver of CO 2 emissions, while CH 4 and N 2 O fluxes are more responsive to water saturation dynamics in lawn soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Harnessing Carbon: A Review of Current Technologies for Transform-ing Methane into Value-added Products

The concern over greenhouse gases, methane (CH 4 ) and carbon dioxide (CO 2 ), is increasing rapidly. There have been strides to find solutions to this global issue but there is not a clear path to a successful end goal. The concentration of CH 4 and CO 2 in the atmosphere has increased significantly over the last 60 years, methane is a great source of concern due to its ability to trap a high amount of heat in the atmosphere. These greenhouse gases contribute to global warming which has caused changes in the environment, including the melting of ice caps, and altered weather patterns. This review investigates biotechnology that has promising potential to aid in the mitigation of the negative effects methane has on the environment by exploring microorganisms, specifically methanotrophs, for their ability to convert methane into secondary value-added products that can be used for a wide range of applications. Methane as a feedstock could provide financial benefits due to the vast amount of methane available from sources like landfills, wastewater treatment plants, and agricultural sites. Furthermore, this review will look at the prospects of bioreactor technology and the potential for more environmentally friendly plastics, such as polyhydroxyalkanoate (PHA), to shy away from traditional petroleum-based plastics. The continuous advancement of bioreactor technology is crucial to mitigating greenhouse gas emissions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Noble-Metal-Free, Nickel-Based Dual Functional Materials for Improved Methane Production from In Situ Carbon Dioxide Capture and Conversion

Promoters for dual functional materials have not been well explored, but promoters could improve the efficiency of the process by improving the selectivity of the CO 2 methanation process. Utilizing integrated capture and conversion, where CO 2 is captured and converted to useful products, would allow for a useful avenue to control CO 2 emissions. One such way to accomplish this would be to utilize materials that can both capture and convert CO 2 to useful products. However, these materials are often based on costly noble metals, like ruthenium and platinum, decreasing their viability on an industrial scale. Less expensive metals, for example, nickel, would allow for dual functional materials to be more readily utilized in industrial settings. Nickel-based dual functional materials often do not react with the captured CO 2 and merely desorb the CO 2 rather than form a useful product. However, promoters have not been well explored for these types of materials to improve the catalytic properties, which would be beneficial to improve nickel-based materials. Herein, we report the addition of ytterbium on a nickel-based dual functional material and the improvements to the production of methane from captured CO 2 with the incorporated ytterbium promoter. The ytterbium promoter improves the selectivity of the catalysts for the hydrogenation of captured CO 2 to methane and increases the ability for the material to capture CO 2 due to additional basic sites being formed on the surface of alumina. As a result, the 12%Ni/4%Yb/6%Na 2 O/Al 2 O 3 catalyst was utilized to capture carbon dioxide and then convert the captured CO 2 to methane over five cycles, where both the amount captured and the amount converted remained stable, indicating the stability of the material over long-term use.

Catalysts↗
DOE OSTI2021

Application of high-speed, species-specific chemiluminescence imaging for laminar flame speed and Markstein length measurements in spherically expanding flames

A high-speed chemiluminescence imaging diagnostic system has been developed and characterized for measuring species-specific properties of spherically expanding flames, with the objective of obtaining synchronized measurements of multiple flame properties from a single flame experiment. The imaging system comprises a high-speed camera coupled to a high-speed image intensifier and optical filters to isolate emission from desired excited species. Here this study validates the diagnostic scheme specifically for measuring laminar flame speed and Markstein length from chemiluminescence at three wavelength bands corresponding to OH*, CH*, and total chemiluminescence, respectively. Mixtures of methane-air and methane/ethane-air were tested at initial conditions of atmospheric pressure and room temperature. An under-utilized methodology for computing unburned Markstein length from burned Markstein length was implemented. Flame speed modeling of each mixture was conducted in Chemkin using AramcoMech 2.0. No significant differences were observed between the results derived from the three emission wavelength bands for the flame speeds nor the Markstein lengths. For both of these properties, excellent agreement was observed between the experimental results and the values reported in the literature. Because laminar flame speed and Markstein length show no dependency on the imaging wavelength, the present results imply that multiple flame properties, such as laminar flame speed, Markstein length, flame thickness, and excited-species intensity profiles, can all be acquired simultaneously for the same flame using this method.

42 ENGINEERING↗
DOE OSTI2021

Process Heat for Chemical Industry

Process heating with nuclear energy can reduce greenhouse gas emissions by reducing combustion of fossil fuels in fired heaters as steam boilers. Light water reactors can replace the majority of steam duties used by industry; however, high temperature processes such as steam methane reforming require advanced high temperature reactors. Here, guidance on matching the scale of nuclear reactors with specific industries is provided. Principles of heat transport, temperature boosting, and substitution for hot combustion gases are also discussed in this section.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

MULTI-DIMENSIONAL MODELING OF THE CFR ENGINE FOR THE INVESTIGATION OF SI NATURAL GAS COMBUSTION AND CONTROLLED END-GAS AUTOIGNITION

Engine knock and misfire are barriers to pathways leading to high-efficiency Spark-Ignited (SI) Natural Gas engines. The general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by low emission limits and the wide range of chemical reactivity in pipeline quality natural gas. Depending on the region and the source of the natural gas, its reactivity, described by its methane number (analogous to the octane number for liquid SI fuels) can span from 65 - 95. In order to realize diesel-like efficiencies, SI natural gas engines must be designed to operate at high BMEP near knock limits over a wide range of fuel reactivity. This requires a deep understanding regarding the combustion-engine interactions pertaining to flame propagation and end-gas autoignition (EGAI). However, EGAI, if controlled, provides an opportunity to increase SI natural gas engine efficiency by increasing combustion rate and the total burned fuel, mitigating the effects of the slow flame speeds of natural gas fuels which generally reduce BMEP and increase unburned hydrocarbon emissions. For this reason, in order to study EGAI phenomenon, the present work highlights multi-dimensional computational fluid dynamics (CFD) models of the Cooperative Fuel Research (CFR) engine. The CFR engine models are used to investigate fuel-engine interactions that lead to EGAI with natural gas, including effects of fuel reactivity, engine operating parameters, and exhaust gas recirculation (EGR). A Three-Pressure Analysis, performed with GT-Power, was used to estimate initial and boundary conditions for the three-dimensional CFD model. CONVERGE CFD v2.4 was used for the three-dimensional CFD modeling where the level set G-Equation model and SAGE detailed chemical kinetics solver were used. An assessment of the different modeling approaches is also provided to evaluate their limitations, advantages and disadvantages, and for which situations they are most applicable. Model validation was performed with experimental data taken with a CFR engine over varying compression ratio, CA50, EGR fraction, and IMEP and shows good agreement in Peak Cylinder Pressure (PCP), PCP crank angle, and the location of the 10%, 50%, and 90% mass fraction burned (CA10, CA50, and CA90, respectively). The models can predict the onset crank angle and pressure rise rate for light, medium, and heavy EGAI under a variety of fuel reactivities and engine operating conditions.

Bestel, Diego↗
DOE OSTI2024

The need for carbon-emissions-driven climate projections in CMIP7

Abstract. Previous phases of the Coupled Model Intercomparison Project (CMIP) have primarily focused on simulations driven by atmospheric concentrations of greenhouse gases (GHGs), for both idealized model experiments and climate projections of different emissions scenarios. We argue that although this approach was practical to allow parallel development of Earth system model simulations and detailed socioeconomic futures, carbon cycle uncertainty as represented by diverse, process-resolving Earth system models (ESMs) is not manifested in the scenario outcomes, thus omitting a dominant source of uncertainty in meeting the Paris Agreement. Mitigation policy is defined in terms of human activity (including emissions), with strategies varying in their timing of net-zero emissions, the balance of mitigation effort between short-lived and long-lived climate forcers, their reliance on land use strategy, and the extent and timing of carbon removals. To explore the response to these drivers, ESMs need to explicitly represent complete cycles of major GHGs, including natural processes and anthropogenic influences. Carbon removal and sequestration strategies, which rely on proposed human management of natural systems, are currently calculated in integrated assessment models (IAMs) during scenario development with only the net carbon emissions passed to the ESM. However, proper accounting of the coupled system impacts of and feedback on such interventions requires explicit process representation in ESMs to build self-consistent physical representations of their potential effectiveness and risks under climate change. We propose that CMIP7 efforts prioritize simulations driven by CO2 emissions from fossil fuel use and projected deployment of carbon dioxide removal technologies, as well as land use and management, using the process resolution allowed by state-of-the-art ESMs to resolve carbon–climate feedbacks. Post-CMIP7 ambitions should aim to incorporate modeling of non-CO2 GHGs (in particular, sources and sinks of methane and nitrous oxide) and process-based representation of carbon removal options. These developments will allow three primary benefits: (1) resources to be allocated to policy-relevant climate projections and better real-time information related to the detectability and verification of emissions reductions and their relationship to expected near-term climate impacts, (2) scenario modeling of the range of possible future climate states including Earth system processes and feedbacks that are increasingly well-represented in ESMs, and (3) optimal utilization of the strengths of ESMs in the wider context of climate modeling infrastructure (which includes simple climate models, machine learning approaches and kilometer-scale climate models).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

MODELING AND PARAMETRIC STUDY OF END-GAS AUTOIGNITION TO ALLOW THE REALIZATION OF ULTRA-LOW EMISSIONS, HIGH-EFFICIENCY HEAVY-DUTY SPARK-IGNITED NATURAL GAS ENGINES

Engine knock and misfire are barriers to pathways leading to high-efficiency Spark-Ignited (SI) Natural Gas (NG) engines. The general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by the low emission limits and the wide range of chemical reactivity in pipeline-quality natural gas. Depending on the region and the source of the natural gas, its reactivity, described by its Methane Number (MN), which is analogous to the Octane Number for liquid SI fuels, can span from 65 to 95. In order to realize diesel-like efficiencies, SI NG engines must be designed to operate at high Brake Mean Effective Pressures (BMEP), near or beyond knock limits, over a wide range of fuel reactivity. This requires a deep understanding of the combustion-engine interactions pertaining to flame propagation and End-Gas Autoignition (EGAI), i.e., the autoignition of the unburned gas (end gas) ahead of the flame front. However, EGAI, if controlled, provides an opportunity to increase SI NG engine efficiency by increasing the combustion rate and the total fraction of burned fuel, mitigating the effects of the slow flame speeds characteristic of natural gas fuels, which generally reduce BMEP and increase unburned hydrocarbon emissions. For this reason, to realize diesel-like efficiencies and ultra-low emissions on SI NG engines, this work proposes the study of the main parameters influencing the modeling and prediction of NG EGAI to allow for its control. In this work, a novel EGAI detection and onset determination method was developed to reliably quantify EGAI for data analysis and engine control. The new method allowed the prediction of EGAI on SI NG engines without the need to use engine- and operating-condition-dependent thresholds and reduced the error in quantifying the fraction of the total energy released by the EGAI event by up to 40%pts. One- and three-dimensional engine models were then developed to study the engine/fuel interactions that lead to NG EGAI and its performance benefits. These models, although having decent agreement with experimental data, showed the need to account for NOx chemistry when predicting NG EGAI due to a consistently later prediction of the EGAI onset (~1.65 crank-angle degrees) and thus, a new reduced chemical mechanism for real NG fuels was developed containing NOx chemistry. The new reduced mechanism improved the EGAI onset prediction agreement to within ±0.5 crank-angle degrees and decreased simulation time during combustion by nearly 50% when using the further reduced AREIS50NOx chemical mechanism. These models were then used to study the role of NG composition on EGAI, evaluate the engine/fuel interactions leading to NG EGAI, and perform engine optimization while leveraging EGAI to increase thermal efficiency. Piston design optimization combined with a Controlled EGAI (C-EGAI) combustion mode allowed a Heavy-Duty (HD) SI NG engine to operate at diesel-like efficiencies, i.e., Brake Thermal Efficiency (BTE) ≥44%. Experimental and modeling data analysis revealed that earlier and faster heat release increases combustion efficiency by an average of 1%pts, increases work transferred to the piston resulting in a decrease in exhaust losses by 50% depending on the engine operating condition while slightly increasing heat losses. Finally, the simulation results revealed an opportunity to further enhance the BTE (up to 50%) by enabling C-EGAI combustion at leaner conditions, λ=1.4-1.6.

Bestel, Diego Bernardi↗
DOE OSTI2024

Methane fluxes in tidal marshes of the conterminous United States

Abstract Methane (CH 4 ) is a potent greenhouse gas (GHG) with atmospheric concentrations that have nearly tripled since pre‐industrial times. Wetlands account for a large share of global CH 4 emissions, yet the magnitude and factors controlling CH 4 fluxes in tidal wetlands remain uncertain. We synthesized CH 4 flux data from 100 chamber and 9 eddy covariance (EC) sites across tidal marshes in the conterminous United States to assess controlling factors and improve predictions of CH 4 emissions. This effort included creating an open‐source database of chamber‐based GHG fluxes ( https://doi.org/10.25573/serc.14227085 ). Annual fluxes across chamber and EC sites averaged 26 ± 53 g CH 4 m −2 year −1 , with a median of 3.9 g CH 4 m −2 year −1 , and only 25% of sites exceeding 18 g CH 4 m −2 year −1 . The highest fluxes were observed at fresh‐oligohaline sites with daily maximum temperature normals (MATmax) above 25.6°C. These were followed by frequently inundated low and mid‐fresh‐oligohaline marshes with MATmax ≤25.6°C, and mesohaline sites with MATmax >19°C. Quantile regressions of paired chamber CH 4 flux and porewater biogeochemistry revealed that the 90th percentile of fluxes fell below 5 ± 3 nmol m −2 s −1 at sulfate concentrations >4.7 ± 0.6 mM, porewater salinity >21 ± 2 psu, or surface water salinity >15 ± 3 psu. Across sites, salinity was the dominant predictor of annual CH 4 fluxes, while within sites, temperature, gross primary productivity (GPP), and tidal height controlled variability at diel and seasonal scales. At the diel scale, GPP preceded temperature in importance for predicting CH 4 flux changes, while the opposite was observed at the seasonal scale. Water levels influenced the timing and pathway of diel CH 4 fluxes, with pulsed releases of stored CH 4 at low to rising tide. This study provides data and methods to improve tidal marsh CH 4 emission estimates, support blue carbon assessments, and refine national and global GHG inventories.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Rapid increase in tropospheric ozone over Southeast Asia attributed to changes in precursor emission source regions and sectors

Observations indicate that tropospheric ozone (O 3 ) concentrations over Southeast Asia have been increasing rapidly since the 1990s. Here, we quantify source contributions from geographical regions and emission sectors of the two distinct types of O 3 precursors, i.e., nitrogen oxides (NO x ) and volatile organic compounds (VOCs), to the increase in tropospheric O 3 in Southeast Asia during 1990–2019 using an O 3 source tagging technique implemented in a global chemistry-climate model. In this work, the results show that although local anthropogenic emission of NO x in Southeast Asia only contributes 18% of the annual averaged near-surface O 3 concentration, the increase in local NO x emission dominates the increasing trend of O 3 concentration in Southeast Asia, accounting for 107% of the regional averaged trend of 1.07 ppb decade -1 . Increases in NO x emissions from East Asia and South Asia explain 29% of the increasing trend, but 9% is offset by the emission reduction in North America. Ground transportation is responsible for 79% of the rapid O 3 increase, followed by 39% contribution from international shipping. Because an increase in anthropogenic NO x emissions enhances the O 3 production efficiency by VOCs, the increase in near-surface O 3 concentrations in Southeast Asia is thereby largely contributed by methane and biogenic VOCs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Cyclometalated Platinum Compounds from Competing C–H/C–X Bond Activation Pathways

X−C^N^N (X = Br, Cl) ligands were reacted with [Pt 2 Me 4 (μ- SMe 2 ) 2 ], 1, resulting in a six-coordinate cyclometalated platinum(IV) compound containing an anionic C^N^N ligand when X = Br and both a platinum(IV) and a platinum(II) product when X = Cl. The platinum(II) species was formed by C−H activation, followed by reductive elimination of methane. The platinum compounds were characterized by multinuclear NMR spectroscopy and single-crystal X-ray diffraction (SCXRD). Photophysical properties were explored by using UV/vis, emission, and transient absorption (TA) spectroscopies. DFT and TDDFT calculations were performed to examine the competition between C−H activation and C−X oxidative addition and compared to experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Carbon Dioxide-Free Hydrogen and Solid Carbon from Natural Gas via Metal Salt Intermediates

Production of hydrogen with low emissions and low energy input is critical for the clean energy transition, enabling all sectors of the economy to decarbonize – from electricity generation to residential heating to industrial power. In this program, Johns Hopkins University in partnership with ETCH, INC translated a novel laboratory-scale chemistry to decompose methane to hydrogen and solid carbon into a pre-commercial system. Central to the process is a closed-loop thermocatalytic redox cycle without water consumption or carbon dioxide generation that can be implemented with low capital and operating costs. Techno-economic and lifecycle analysis suggests this approach will produce the lowest cost and lowest-emissions route to hydrogen production.

03 NATURAL GAS↗
DOE OSTI2026

Dated soil C–N–P profiles, water quality, and chamber fluxes across Ohio and Michigan wetlands (2024–2025)

This dataset includes dated soil core chemistry (bulk density, phosphorus, nitrogen and carbon concentrations), water quality, and chamber flux measurements collected from wetlands in the Midwest United States—12 sites in Ohio, one site in Indiana, one site in Michigan—collected in the spring or summer of 2024 or 2025, all in (.csv) format. These data were generated to examine how wetland restoration, management activities, and time since restoration affect biogeochemical processes, carbon sequestration, nutrient accumulation, water quality, and greenhouse gas emissions. Specifically, these data aim to investigate how restored wetlands differ from natural wetlands in terms of carbon, nitrogen, phosphorus dynamics, as well as carbon dioxide and methane fluxes. Also included are surface and porewater quality parameters and chamber flux measurements across these different wetlands. Sampling was conducted at various sites representing a range of restoration stages, from about 4 years post-restoration up to 105 years post-restoration, and also includes a natural wetland used as a reference in Michigan. These data can be used to determine carbon sequestration rates, nutrient cycling, and to enhance our understanding of biogeochemical responses to wetland restoration in temperate ecosystems. This data package contains (1) a csv file (Water_Quality.csv) containing water quality data (dissolved organic carbon, total dissolved nitrogen, and temperature) organized by location; (2) a csv file (Soil_C_N_P_Seq.csv) containing carbon, nitrogen, and phosphorus concentrations at each soil level and time of each soil level, as well as their sequestration rates; (3) a csv file (CH4_CO2_Flux.csv) including methane and carbon dioxide fluxes that were measured with a chamber; (4) a file-level metadata (FLMD.csv) file that lists each file contained in the dataset with associated metadata; (5) a data dictionary (DD.csv) file that contains terms/column headers used throughout the files along with a definition, units, and data type; and (6) a locations metadata file (Location_metadata.csv).

Earth Science > Atmosphere > Atmospheric Chemistry↗
DOE OSTI2025

Carbon‐negative hydrogen from ethanol via catalytic oxidative reforming

Abstract This study evaluated a commercial technology for producing low‐ or negative‐carbon hydrogen through ethanol catalytic oxidative reforming, focusing on the life cycle greenhouse gas emissions, or carbon intensity (CI). Various scenarios were analyzed: (a) comparing corn ethanol (first‐generation or Gen1 ethanol) and cellulosic ethanol (second‐generation or Gen2 ethanol) as feedstocks; (b) assessing carbon capture and sequestration (CCS) for CO 2 from upstream fermentation; and (c) evaluating oxygen sourcing via air separation units vs. on‐site or off‐site water electrolysis using a proton exchange membrane. Findings indicate that the CI for hydrogen production using Gen2 ethanol from corn stover is lower than that of Gen1 corn ethanol. Additionally, using proton exchange membrane‐generated oxygen results in a lower CI than air separation unit‐generated oxygen, regardless of the sourcing method. Implementing CCS for the hydrogen production plant's evolved CO 2 is essential for achieving a net‐negative CI for hydrogen from Gen1 ethanol. All examined scenarios, including both ethanol generations, oxygen sources, and CCS applications, demonstrated a net‐negative carbon intensity, surpassing the life cycle greenhouse gas emissions threshold of 0.45 kg CO 2 e/kg to enable policy credits as outlined in the Inflation Reduction Act §45V. In comparison, the CI for hydrogen from steam methane reforming stands at 3.4 kg CO 2 e/kg with CCS and 9.4 kg CO 2 e/kg without CCS.

08 HYDROGEN↗
DOE OSTI2022

CO 2 conversion to syngas via electrification of endothermal reactors: Process design and environmental impact analysis

CO 2 utilization via reverse water gas shift (rWGS) reaction has been proposed as a path to the sustainable utilization. Here this work presents a detailed process modelling study where steam methane reforming (SMR) generated hydrogen was combined with rWGS to produce syngas (CO + H 2 ) with various hydrogen-to-carbon oxide ratios. To further decrease CO 2 emissions that may offset the benefits of CO 2 converted in rWGS, electrification of endothermal reactors, both SMR and rWGS was considered where CO 2 emitting fuel burning in the furnace was replaced by the emerging ohmic (resistive) heating. Material and energy inventory obtained from process design calculations was used to perform Life Cycle Analysis (LCA) to calculate environmental impacts of CO 2 consumption and reactor electrification. The results showed that greenhouse gas emissions, in CO 2 kg equivalent, were the lowest when both SMR and rWGS were heated using wind-generated electricity, decreasing from 25 to 10 kg CO 2 equivalent for H 2 :CO = 2:1 while the conventional electricity mix used for furnace electrical heating across the board of scenarios generated highest environmental impacts, much higher than those that used natural gas as fuel. Process economics calculations suggested that, when both SMR and rWGS were electrically heated, the process only showed product syngas cost parity with the conventional fuel heated design when electricity cost was ~$0.008/kWh. This suggests that CO 2 utilization scenarios involving process electrification need to be carefully considered from the total design perspective so they do not produce more greenhouse gases than in conventional non-electrified scenarios.

42 ENGINEERING↗
DOE OSTI2023

Radiation-induced dry reforming: A negative emission process

The reaction between the most abundant greenhouse gases (GHG) to produce hydrogen might represent the most powerful and effective decarbonizing opportunity, if a low-carbon energy source is used to drive it. This is the case of methane (CH 4 ) dry reforming (MDR) where its reaction with carbon dioxide (CO 2 ) produces synthesis gas (syngas, a mixture of carbon monoxide and hydrogen). Here this study explores the feasibility of using ionizing radiation to induce the MDR reaction, at low temperatures and/or less energy demanding conditions. Additionally, the ionizing radiation is proposed to be supplied by nuclear power plants (NPPs), which are low-carbon reliable energy generation sources. Thus, the radiolysis of CO 2 , CH 4 and their mixtures, under ?-irradiation was evaluated in the absence and presence of nickel catalysts. The radiation-induced MDR reaction and radiation-induced catalytic promotion were proven to take place at temperatures close to ambient though at low conversion, with yields below 1%. Since irradiation and heat can be provided by a nuclear power plant, this radiation-induced reaction establishes a connection between nuclear energy to renewable resources and enables a pathway for a decarbonized cleaner chemical industry, for producing green chemicals.

08 HYDROGEN↗
DOE OSTI2024

Empirical Dynamic Modeling Reveals Complexity of Methane Fluxes in a Temperate Salt Marsh

Abstract Methane dynamics within salt marshes are complex because vegetation types, temperature, oscillating water levels, and changes in salinity and redox conditions influence CH 4 production, consumption, oxidation, and emissions. These non‐linear and complex interactions among variables affect the traditionally expected functional relationships and present challenges for interpreting and developing process‐based models. We employed empirical dynamic modeling (EDM) and convergent cross mapping (CCM) as a novel approach for characterizing seasonal/multiday and diurnal CH 4 dynamics by inferring causal variables, lags, and interconnections among multiple biophysical variables within a temperate salt marsh using 5 years of eddy covariance data. EDM/CCM is a nonparametric approach capable of quantifying the coupling between variables while determining time scales where variable interactions are the most relevant. We found that gross primary productivity, tidal creek dissolved oxygen, and temperature were important for seasonal/multiday dynamics (rho = 0.73–0.80), while water level was most important for diurnal dynamics during both the growing and dormancy phenoperiods (rho = 0.72 and 0.56, respectively). Lags for the top‐ranked variables (i.e., gross primary productivity, dissolved oxygen, temperature, water level) occurred between 1 and 5 weeks at the seasonal scale and 1–24 hr at the diurnal scale. The EDM had high prediction capabilities for intra‐/inter‐seasonal patterns and annual CH 4 sums but had limitations in representing large, infrequent fluxes. Results highlight the importance of non‐linearity, drivers, lag times, and interconnections among multiple biophysical variables that regulate CH 4 fluxes in tidal wetlands. This research introduces a novel approach to examining CH 4 fluxes, which will aid in evaluating current paradigms in wetlands and other ecosystems.

Environmental Sciences & Ecology↗