Search NASA⌕ Search

SEARCH · Search NASA

Results for “model identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Validation of an Experimentally Derived Uncertainty Model

The results show that uncertainty models can be obtained directly from system identification data by using a minimum norm model validation approach. The error between the test data and an analytical nominal model is modeled as a combination of unstructured additive and structured input multiplicative uncertainty. Robust controllers which use the experimentally derived uncertainty model show significant stability and performance improvements over controllers designed with assumed ad hoc uncertainty levels. Use of the identified uncertainty model also allowed a strong correlation between design predictions and experimental results.

Lim, K. B.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-27509-DND

The information about composition of aerosols has a great importance for monitoring and understanding of climate and environment dynamics. Such information can be obtained using situ measurements or chemical transport models. However, in situ sampling has limited spatial and temporal coverage, while estimations have large uncertainties. The present work enables the monitoring of aerosol chemical species from space-borne observations, providing observationally-based results with spatial and temporal coverage. Following the ideas of Schuster et al.(2005, 2009, 2016), we retrieve chemical composition directly from satellite observations without intermediate retrieval of the refractive index (in contrast with Schuster's approach). This approach is expected to reduce the influence of modeling uncertainties, and to provide additional constraints in situations where remote sensing observations do not have enough spectral sensitivity to refractive index. One of principal difficulties is the identification of an adequate model for linking refractive index to chemical composition. Therefore, the initial effort of this work has focused on identifying an optimal physico-chemistry to refractive index conversion model. With that purpose, we first tested the retrieval approach using a simplified volume-weighting model and updated by the Maxwell Garnett mixing model. This concept was incorporated into the GRASP algorithm designed to retrieve an extended set of atmospheric parameters from remote sensing observations. Then a series of sensitivity tests using synthetic data of POLDER/PARASOL were conducted, and followed by inversion of real PARASOL observations over Africa. The sensitivity tests showed that these two models allow the retrieval to distinguish amongst the assumed chemical species. Results obtained from real PARASOL data demonstrated good agreement with the optical characteristics provided by AERONET. In addition, the obtained patterns of chemical component distribution agreed with known physical expectations. We also compared the chemical composition retrievals to GOCART model simulations and obtained good consistencies.

Lei Li↗
DOE OSTI2026

A Data-Driven Method for Modeling Creep-Fatigue Stress- Strain Behavior Using Neural ODEs

In this paper, we introduce a data-driven machine learning approach for modeling one-dimensional stress–strain behavior under cyclic loading, utilizing experimental data from the nickel-based Alloy 617. The study employs uniaxial creep–fatigue test data acquired under various loading histories and compares two distinct neural network-based ODE models. The first model, known as the black-box model, comprehensively describes the strain–stress relationship using a Neural ODE equation. To interpret this black-box model, we apply the Sparse Identification of Nonlinear Dynamical Systems (SINDy) technique, transforming the black-box model into an equation-based model using symbolic regression. The second model, the Neural flow rule model, incorporates Hooke’s Law for the linear elastic component, with the nonlinear part characterized by a Neural ODE. Both models are trained with experimental data to accurately reflect the observed stress–strain behavior. We conduct a detailed comparison with the standard Chaboche model, which includes three back stresses. Our results demonstrate that the neural network-based ODE models precisely capture the experimental creep–fatigue mechanical behavior, exceeding the standard Chaboche model’s accuracy. Furthermore, an interpretable model derived from the black-box neural ODE model through symbolic regression achieves accuracy comparable to the Chaboche model, enhancing its interpretability. The results highlight the potential of neural network-based ODE models to depict complex creep–fatigue behavior, eliminating the necessity for experts to define a specific, material-focused model form.

creep-fatigue↗
DOE OSTI2026

Hybrid Dynamic Modeling of Smart Inverter

This letter proposes a novel hybrid method for assessing grid-connected three-phase converter interfaced resources (CIR) dynamics with the IEEE standard 1547-2018 grid support functions (GSFs), which blends physics and data-driven techniques. First, the letter derives an analytical model of a CIR to represent the internal physics and data-driven model (DDM) using a system identification algorithm to represent the rest of the dynamics, including the GSF. The derived hybrid model combines the analytical model of CIR and DDM, which balances accuracy and flexibility and is compared with the detailed switched model. Furthermore, the efficacy of the proposed approach to represent the advanced CIR dynamics is substantiated by power hardware-in-the-loop experiment data where real measurements from a commercial CIR are used to cross-validate the proposed approach. Furthermore, the results indicate that despite simple, the hybrid model accurately reproduces the dynamics of the detailed CIR model with an acceptable accuracy.

Data-driven model↗
NASA NTRS1992

System/observer/controller identification toolbox

System Identification is the process of constructing a mathematical model from input and output data for a system under testing, and characterizing the system uncertainties and measurement noises. The mathematical model structure can take various forms depending upon the intended use. The SYSTEM/OBSERVER/CONTROLLER IDENTIFICATION TOOLBOX (SOCIT) is a collection of functions, written in MATLAB language and expressed in M-files, that implements a variety of modern system identification techniques. For an open loop system, the central features of the SOCIT are functions for identification of a system model and its corresponding forward and backward observers directly from input and output data. The system and observers are represented by a discrete model. The identified model and observers may be used for controller design of linear systems as well as identification of modal parameters such as dampings, frequencies, and mode shapes. For a closed-loop system, an observer and its corresponding controller gain directly from input and output data.

Juang, Jer-Nan↗
NASA NTRS1988

An alternative to Guyan reduction of finite-element models

Structural modeling is a key part of structural system identification for large space structures. Finite-element structural models are commonly used in practice because of their general applicability and availability. The initial models generated by using a standard computer program such as NASTRAN, ANSYS, SUPERB, STARDYNE, STRUDL, etc., generally contain tens of thousands of degrees of freedom. The models must be reduced for purposes of identification. Not only does the magnitude of the identification effort grow exponentially as a function of the number of degrees of freedom, but numerical procedures may also break down because of accumulated round-off errors. Guyan reduction is usually applied after a static condensation. Misapplication of Guyan reduction can lead to serious modeling errors. It is quite unfortunate and disappointing, since the accuracy of the original detailed finite-element model one tries very hard to achieve is lost by the reduction. First, why and how Guyan reduction always causes loss of accuracy is examined. An alternative approach is then introduced. The alternative can be thought of as an improvement of Guyan reduction, the Rayleigh-Ritz method, and in particular the recent algorithm of Wilson, Yuan, and Dickens. Unlike Guyan reduction, the use of the alternative does not need any special insight, experience, or skill for partitioning the structural degrees of freedom. In addition to model condensation, this alternative approach can also be used for predicting analytically, quickly, and economically, what are those structural modes that are excitable by a force actuator at a given trial location. That is, in the excitation of the structural modes for identification, it can be used for guiding the placement of the force actuators.

Lin, Jiguan Gene↗
DOE OSTI2025

Challenges in the detection of gases in exoplanet atmospheres

Claims of detections of gases in exoplanet atmospheres often rely on comparisons between models including and excluding specific chemical species. However, the space of molecular combinations available for model construction is vast and highly degenerate. Only a limited subset of these combinations is typically explored for any given detection. As a result, apparent detections of trace gases risk being artefacts of incomplete modelling rather than robust identification of atmospheric constituents, especially in the low-signal-to-noise regime. Here, using the sub-Neptune K2-18 b as a case study, we show that recent biosignature claims vanish when the model space is expanded, with numerous alternatives providing equally good or better fits. We demonstrate that the significance of a claimed detection relies on the choice of models being compared, and that model preference does not in itself imply the presence of a specific gas. In conclusion, we recommend treating model comparisons instead as relative adequacy tests, which should be supported by theoretical predictions and complementary metrics of statistical significance to attribute a signal to a particular gas.

Astronomy and AstroPhysics↗
NASA NTRS1985

Deuterium on Venus - Model comparisons with Pioneer Venus observations of the predawn bulge ionosphere

A self-consistent model of the Venus ionosphere in the predawn bulge region where the mass-two ion density is observed to be maximum was prepared in order to examine the question of mass-two ion identification in detail. The model calculations are compared to the Pioneer Venus observations of ion composition and structure in the 153-250 km altitude range. The observed densities of major ions O2(+) and O(+) are used to constrain the source of ionization. Once the source is determined, the density distribution of D(+) and H2(+) is calculated for various values of D and H2 in the atmosphere. It is found that mass-two ion is clearly due to deuterium and that the H2 contribution to the mass-two ion is small, if present at all.

Kumar, S.↗
NASA NTRS1986

Identification of linearized equations of motion for the fixed wing configuration of the rotor systems research aircraft

The purpose of this report is to establish linear, decoupled models of rigid body motion for the fixed wing configuration of the Rotor Systems Research Aircraft (RSRA). Longitudinal and lateral control surface fixed linear models were created from aircraft time histories using current system identification techniques. Models were obtained from computer simulation at 160 KCAS and 200 KCAS, and from flight data at 160 KCAS. Comparisons were performed to examine modeling accuracy, variation of dynamics with airspeed and correlation of simulation and flight data results. The results showed that the longitudinal and lateral linear models accurately predicted RSRA dynamics. The flight data results showed that no significant handling qualities problems were present in the RSRA fixed wing aircraft at the flight speed tested.

Balough, D. L.↗
NASA NTRS1977

Identification of state variables and dynamic inflow from rotor model dynamic tests

The paper describes methods for extracting unknown state variables and parameters from dynamic rotor model tests given transient cyclic pitch stirring inputs, blade root flap-bending measurements, and the form of the dynamic rotor equations, including a rotor dynamic inflow description, when none of the physical parameters are known. A simplified version of the maximum likelihood method seems best suited for this purpose. The measurement equation error covariance matrix is assumed constant during each iteration, but updated for the subsequent iteration. A detailed analysis of the suitability of the derived techniques for studying various rotor dynamic inflow effects is provided.

Banerjee, D.↗
NASA NTRS1982

Report of the Subpanel on Error Characterization and Error Budgets

The state of knowledge of both user positioning requirements and error models of current and proposed satellite systems is reviewed. In particular the error analysis models for LANDSAT D are described. Recommendations are given concerning the geometric error model for the thematic mapper; interactive user involvement in system error budgeting and modeling and verification on real data sets; and the identification of a strawman mission for modeling key error sources.

Source record↗
NASA NTRS1997

Identification of the prooxidant site of human ceruloplasmin: a model for oxidative damage by copper bound to protein surfaces

Free transition metal ions oxidize lipids and lipoproteins in vitro; however, recent evidence suggests that free metal ion-independent mechanisms are more likely in vivo. We have shown previously that human ceruloplasmin (Cp), a serum protein containing seven Cu atoms, induces low density lipoprotein oxidation in vitro and that the activity depends on the presence of a single, chelatable Cu atom. We here use biochemical and molecular approaches to determine the site responsible for Cp prooxidant activity. Experiments with the His-specific reagent diethylpyrocarbonate (DEPC) showed that one or more His residues was specifically required. Quantitative [14C]DEPC binding studies indicated the importance of a single His residue because only one was exposed upon removal of the prooxidant Cu. Plasmin digestion of [14C]DEPC-treated Cp (and N-terminal sequence analysis of the fragments) showed that the critical His was in a 17-kDa region containing four His residues in the second major sequence homology domain of Cp. A full length human Cp cDNA was modified by site-directed mutagenesis to give His-to-Ala substitutions at each of the four positions and was transfected into COS-7 cells, and low density lipoprotein oxidation was measured. The prooxidant site was localized to a region containing His426 because CpH426A almost completely lacked prooxidant activity whereas the other mutants expressed normal activity. These observations support the hypothesis that Cu bound at specific sites on protein surfaces can cause oxidative damage to macromolecules in their environment. Cp may serve as a model protein for understanding mechanisms of oxidant damage by copper-containing (or -binding) proteins such as Cu, Zn superoxide dismutase, and amyloid precursor protein.

NASA Discipline Regulatory Physiology↗
NASA NTRS1991

Model correlation and damage location for large space truss structures: Secant method development and evaluation

On-orbit testing of a large space structure will be required to complete the certification of any mathematical model for the structure dynamic response. The process of establishing a mathematical model that matches measured structure response is referred to as model correlation. Most model correlation approaches have an identification technique to determine structural characteristics from the measurements of the structure response. This problem is approached with one particular class of identification techniques - matrix adjustment methods - which use measured data to produce an optimal update of the structure property matrix, often the stiffness matrix. New methods were developed for identification to handle problems of the size and complexity expected for large space structures. Further development and refinement of these secant-method identification algorithms were undertaken. Also, evaluation of these techniques is an approach for model correlation and damage location was initiated.

Smith, Suzanne Weaver↗
NASA NTRSDate not supplied

Reduced-Order Aerodynamic Modeling Based on CFD Frequency Responses from Multisine Inputs

A system identification analysis was performed to determine reduced-order models of a computational fluid dynamics (CFD) solver for linear aeroelastic analysis and control design. The application was to the FUN3D code and the flexible half-span wind tunnel test article, in transonic flow conditions, used in the NASA-Boeing collaboration called the Integrated Adaptive Wing Technology Maturation (IAWTM) project. Multiple inputs (structural mode displacements and control surface deflections) were simultaneously excited with orthogonal phase-optimized multisines and multiple outputs (generalized aerodynamic forces) were recorded, from which the matrix of frequency responses were computed using a single CFD run. A state-space model was then fit to the frequency response data using a maximum-likelihood estimator.

System identification↗
DOE OSTI2024

Development and Validation of Home Comfort System for Total Performance Deficiency/Fault Detection and Optimal Comfort Control

In this project, we developed and tested a learning-based home thermal model that facilitates the operation of a model predictive control (MPC)-based optimization agent and an automated fault detection and diagnosis (AFDD) agent. The home thermal model was constructed using a two-node resistor-capacitor model. Moreover, two accompanying parameter identification methods were introduced, least-squares and optimization. Based on the home thermal model, the MPC-based optimization agent was developed to optimize residential HVAC operation. Using two FDD methods, the AFDD agent was constructed to detect and diagnose two prevalent residential AC faults, airflow reduction and refrigerant undercharge. The home thermal model, along with the MPC-based optimization agent and AFDD agent, were tested at the Norman Test House, Miami Test House, Pacific Northwest National Laboratory (PNNL) Test House A, and PNNL Test House B. Finally, they were also field tested in nine demonstration homes with real occupants.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1975

A multiloop approach to modeling motion sensor responses

By using a least squares identification algorithm, a multiloop approach is taken to effectively model the response characteristics of the motion sensors. The inputs to the model include the possible sources of information provided to the human via his motion sensing system. One input models the response of the angular acceleration sensors (second derivative of position) and the second input models the response of the linear sensors (sine of position). The third input is the visual display error provided to the human in the closed loop tracking experiment. Data from a roll axis tracking simulation were analyzed. The major source of pilot lead under the motion mode of operation is discussed for control of plants in which motion information improved performance and in which there was no improvement in performance.

Junker, A. M.↗
NASA NTRS1998

Identification of Complex Carbon Nanotube Structures

A variety of complex carbon nanotube (CNT) structures have been observed experimentally. These include sharp bends, branches, tori, and helices. They are believed to be formed by using topological defects such as pentagons and heptagons to connect different CNT. The effects of type, number, and arrangement (separation and orientation) of defects on atomic structures and energetics of complex CNT are investigated using topology, quantum mechanics and molecular mechanics calculations. Energetically stable models are derived for identification of observed complex CNT structures.

Han, Jie↗
NASA NTRSDate not supplied

The Emphasis of Design Patterns in Expressing Expert Knowledge From A Technical Solution – A Framework for Continued Research

Digital Engineering is a transformative strategy that leverages an integrated model-based approach to improve communication, decision making, design understanding, and acquisition efficiency of system development. As modern systems are derived from pre-existing systems, harvesting expert knowledge from proven systems in a useful, model-based way will reduce the experiential learning and cognition required for new system development, contributing to a Digital Engineering transformation. Motivated by performance gains observed during a multi-year, sequential development activity, this survey reviews knowledge, architecture, and pattern literature to establish a framework for research of architectural methods for expert knowledge identification and description using Model Based System Engineering. The multi-year sequential development activity is offered as the experimental system of interest for this research. This work aims to enable a digital engineering strategy that improves concept phase decision making, accelerates knowledge acquisition from lessons learned repositories, and eases the burden of generational knowledge loss.

Lithium Ion↗