Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple scattering effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

An Approximate Equation For The Multiply Scattered Contribution to A Lidar Return

An approximate equation is developed which describes the contribution of Nth order scattering to a lidar return. This development assumes a homogeneous scattering medium characterized by a scattering function sharply peaked in the forward direction and relatively insensitive to angle near the backscatter direction. The derivation includes the effects of finite divergence of the transmitted laser beam, finite receiver field of view, finite separation between the laser and the receiver and nonparallel system alignment. The derivation presented uses small angle approximations to reduce the time dependent multiple scattering problem to a time independent form which is then solved with techniques previously developed for multiple small angle nuclear scattering.

Eloranta, Edwin W.↗

Photothermal effects induced by laser heating of gold nanorods in suspensions and inoculated tumours during in vivo experiments

Photothermal effects are studied under laser irradiation of aqueous suspensions of gold nanorods (in vitro experiments) and mice-inoculated Erlich carcinoma after intravenous injection of gold nanorods with the size 40 Multiplication-Sign 10 nm and plasmon resonance at the wavelength 810 nm (in vivo experiment). In 24 hours after the injection the polyethylene-glycol-coated nanoparticles accumulated in the tumour with the concentration three - four times greater than in healthy muscle tissue. At concentrations, attained as a result of passive accumulation of nanoparticles in the tumour (4 {mu}g per 1 g of tumour), the efficiency of the tumour heating was higher than that in aqueous solutions having the same concentration of nanoparticles. Various mechanisms of this effect are discussed including the difference in thermal physical parameters of water and biotissue, the aggregation of nanoparticles in tissues, the influence of multiple scattering in biotissue, and the nonuniform accumulation of particles in the tumour. Using the Monte Carlo method for simulating multiple scattering of light, it is shown that there are such proportions between the biotissue scattering coefficient and the absorption coefficient of nanoparticles, at which the fraction of absorbed photons in the tissue is higher than that in a transparent medium containing the same nanoparticles. The conclusion is made that the regime of hyperthermia is less efficient for antineoplastic therapy than the thermal damage due to fast short-time heating of the tissues up to the destruction temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Social-ecological network analysis for sustainability sciences: a systematic review and innovative research agenda for the future

Social-ecological network (SEN) concepts and tools are increasingly used in human-environment and sustainability sciences. We take stock of this budding research area to further show the strength of SEN analysis for complex human-environment settings, identify future synergies between SEN and wider human-environment research, and provide guidance about when to use different kinds of SEN approaches and models. We characterize SEN research along a spectrum specifying the degree of explicit network representation of system components and dynamics. We then systematically review one end of this spectrum, what we term ‘fully articulated SEN’ studies, which specifically model unique social and ecological units and relationships. Results show a larger number of papers focus on methodological advancement and applied ends. While there has been some development and testing of theories, this remains an area for future work and would help develop SENs as a unique field of research, not just a method. Authors have studied diverse systems, while mainly focusing on the problem of social-ecological fit alongside a scattering of other topics. There is strong potential, however, to engage other issues central to human-environment studies. Analyzing the simultaneous effects of multiple social, environmental, and coupled processes, change over time, and linking network structures to outcomes are also areas for future advancement. This review provides a comprehensive assessment of (fully articulated) SEN research, a necessary step that can help scholars develop comparable cases and fill research gaps.

environmental governance↗

Proton Lateral Broadening Distribution Comparisons Between GRNTRN, MCNPX, and Laboratory Beam Measurements

Recent developments in NASA s deterministic High charge (Z) and Energy TRaNsport (HZETRN) code have included lateral broadening of primary ion beams due to small-angle multiple Coulomb scattering, and coupling of the ion-nuclear scattering interactions with energy loss and straggling. This new version of HZETRN is based on Green function methods, called GRNTRN, and is suitable for modeling transport with both space environment and laboratory boundary conditions. Multiple scattering processes are a necessary extension to GRNTRN in order to accurately model ion beam experiments, to simulate the physical and biological-effective radiation dose, and to develop new methods and strategies for light ion radiation therapy. In this paper we compare GRNTRN simulations of proton lateral broadening distributions with beam measurements taken at Loma Linda University Proton Therapy Facility. The simulated and measured lateral broadening distributions are compared for a 250 MeV proton beam on aluminum, polyethylene, polystyrene, bone substitute, iron, and lead target materials. The GRNTRN results are also compared to simulations from the Monte Carlo MCNPX code for the same projectile-target combinations described above.

Mertens, Christopher J.↗

Earth as an Extrasolar Planet: Earth Model Validation Using EPOXI Earth Observations

The EPOXI Discovery Mission of Opportunity reused the Deep Impact flyby spacecraft to obtain spatially and temporally resolved visible photometric and moderate resolution near-infrared (NIR) spectroscopic observations of Earth. These remote observations provide a rigorous validation of whole disk Earth model simulations used to better under- stand remotely detectable extrasolar planet characteristics. We have used these data to upgrade, correct, and validate the NASA Astrobiology Institute s Virtual Planetary Laboratory three-dimensional line-by-line, multiple-scattering spectral Earth model (Tinetti et al., 2006a,b). This comprehensive model now includes specular reflectance from the ocean and explicitly includes atmospheric effects such as Rayleigh scattering, gas absorption, and temperature structure. We have used this model to generate spatially and temporally resolved synthetic spectra and images of Earth for the dates of EPOXI observation. Model parameters were varied to yield an optimum fit to the data. We found that a minimum spatial resolution of approx.100 pixels on the visible disk, and four categories of water clouds, which were defined using observed cloud positions and optical thicknesses, were needed to yield acceptable fits. The validated model provides a simultaneous fit to the Earth s lightcurve, absolute brightness, and spectral data, with a root-mean-square error of typically less than 3% for the multiwavelength lightcurves, and residuals of approx.10% for the absolute brightness throughout the visible and NIR spectral range. We extend our validation into the mid-infrared by comparing the model to high spectral resolution observations of Earth from the Atmospheric Infrared Sounder, obtaining a fit with residuals of approx.7%, and temperature errors of less than 1K in the atmospheric window. For the purpose of understanding the observable characteristics of the distant Earth at arbitrary viewing geometry and observing cadence, our validated forward model can be used to simulate Earth s time dependent brightness and spectral properties for wavelengths from the far ultraviolet to the far infrared.brightness

Robinson, Tyler D.↗

(abstract) A Polarimetric Model for Effects of Brine Infiltrated Snow Cover and Frost Flowers on Sea Ice Backscatter

A polarimetric scattering model is developed to study effects of snow cover and frost flowers with brine infiltration on thin sea ice. Leads containing thin sea ice in the Artic icepack are important to heat exchange with the atmosphere and salt flux into the upper ocean. Surface characteristics of thin sea ice in leads are dominated by the formation of frost flowers with high salinity. In many cases, the thin sea ice layer is covered by snow, which wicks up brine from sea ice due to capillary force. Snow and frost flowers have a significant impact on polarimetric signatures of thin ice, which needs to be studied for accessing the retrieval of geophysical parameters such as ice thickness. Frost flowers or snow layer is modeled with a heterogeneous mixture consisting of randomly oriented ellipsoids and brine infiltration in an air background. Ice crystals are characterized with three different axial lengths to depict the nonspherical shape. Under the covering multispecies medium, the columinar sea-ice layer is an inhomogeneous anisotropic medium composed of ellipsoidal brine inclusions preferentially oriented in the vertical direction in an ice background. The underlying medium is homogeneous sea water. This configuration is described with layered inhomogeneous media containing multiple species of scatterers. The species are allowed to have different size, shape, and permittivity. The strong permittivity fluctuation theory is extended to account for the multispecies in the derivation of effective permittivities with distributions of scatterer orientations characterized by Eulerian rotation angles. Polarimetric backscattering coefficients are obtained consistently with the same physical description used in the effective permittivity calculation. The mulitspecies model allows the inclusion of high-permittivity species to study effects of brine infiltrated snow cover and frost flowers on thin ice. The results suggest that the frost cover with a rough interface significantly increases the backscatter from thin saline ice and the polarimetric signature becomes closer to the isotropic characteristics. The snow cover also modifies polarimetric signatures of thin sea ice depending on the snow mixture and the interface condition.

thin sea ice radar backscatter frost flowers snow ↗

A study of radiation damage effects on the magnetic structure of bulk Iron

Defects, defect interactions, and defect dynamics in solids created by fast neutrons are known to have significant impact on the performance and lifetime of structural materials. A fundamental understanding of the radiation damage effects in solids is therefore of great importance in assisting the development of improved materials - materials with ultrahigh strength, toughness, and radiation resistance. In this presentation, we show our recent theoretical investigation on the magnetic structure evolution of bulk iron in the region of the radiation defects. We applied a linear scaling ab-initio method based on density functional theory with local spin density approximation, namely the locally self-consistent multiple scattering method (LSMS), to the study of magnetic moment distributions in a cascade at the damage peak and for a series of time steps as the interstitials and vacancies recombined. Atomic positions correspond to those in a low energy cascade in a 10|000 atom sample, in which the primary damage state and the evolution of all defects produced were simulated using molecular dynamics with empirical, embedded-atom inter-atomic potentials. We will discuss how a region of affected moments expands and then recedes in response to a cascade evolution.

36 MATERIALS SCIENCE↗

Benchmark Modeling of the Near-Field and Far-Field Wave Effects of Wave Energy Arrays

This project is an industry-led partnership between Columbia Power Technologies and Oregon State University that will perform benchmark laboratory experiments and numerical modeling of the near-field and far-field impacts of wave scattering from an array of wave energy devices. These benchmark experimental observations will help to fill a gaping hole in our present knowledge of the near-field effects of multiple, floating wave energy converters and are a critical requirement for estimating the potential far-field environmental effects of wave energy arrays. The experiments will be performed at the Hinsdale Wave Research Laboratory (Oregon State University) and will utilize an array of newly developed Buoys' that are realistic, lab-scale floating power converters. The array of Buoys will be subjected to realistic, directional wave forcing (1:33 scale) that will approximate the expected conditions (waves and water depths) to be found off the Central Oregon Coast. Experimental observations will include comprehensive in-situ wave and current measurements as well as a suite of novel optical measurements. These new optical capabilities will include imaging of the 3D wave scattering using a binocular stereo camera system, as well as 3D device motion tracking using a newly acquired LED system. These observing systems will capture the 3D motion history of individual Buoys as well as resolve the 3D scattered wave field; thus resolving the constructive and destructive wave interference patterns produced by the array at high resolution. These data combined with the device motion tracking will provide necessary information for array design in order to balance array performance with the mitigation of far-field impacts. As a benchmark data set, these data will be an important resource for testing of models for wave/buoy interactions, buoy performance, and far-field effects on wave and current patterns due to the presence of arrays. Under the proposed project we will initiate high-resolution (fine scale, very near-field) fluid/structure interaction simulations of buoy motions, as well as array-scale, phase-resolving wave scattering simulations. These modeling efforts will utilize state-of-the-art research quality models, which have not yet been brought to bear on this complex problem of large array wave/structure interaction problem.

16 TIDAL AND WAVE POWER↗

DETECTING OCEANS ON EXTRASOLAR PLANETS USING THE GLINT EFFECT

Glint, the specular reflection of sunlight off Earth's oceans, may reveal the presence of oceans on an extrasolar planet. As an Earth-like planet nears crescent phases, the size of the ocean glint spot increases relative to the fraction of the illuminated disk, while the reflectivity of this spot increases. Both effects change the planet's visible reflectivity as a function of phase. However, strong forward scattering of radiation by clouds can also produce increases in a planet's reflectivity as it approaches crescent phases, and surface glint can be obscured by Rayleigh scattering and atmospheric absorption. Here, we explore the detectability of glint in the presence of an atmosphere and realistic phase-dependent scattering from oceans and clouds. We use the NASA Astrobiology Institute's Virtual Planetary Laboratory three-dimensional line-by-line, multiple-scattering spectral Earth model to simulate Earth's broadband visible brightness and reflectivity over an orbit. Our validated simulations successfully reproduce phase-dependent Earthshine observations. We find that the glinting Earth can be as much as 100% brighter at crescent phases than simulations that do not include glint, and that the effect is dependent on both orbital inclination and wavelength, where the latter dependence is caused by Rayleigh scattering limiting sensitivity to the surface. We show that this phenomenon may be observable using the James Webb Space Telescope paired with an external occulter.

79 ASTRONOMY AND ASTROPHYSICS↗

Engineered Surface Barrier Monitoring Using Ground-Penetrating Radar, Time-Domain Reflectometry, and Neutron-Scattering Techniques

Effective monitoring of surface barriers intended to isolate and protect waste from the accessible environment requires techniques to assess their performance. Quantifying drainage conditions at any point below the barrier is difficult because field-scale drainage measurements are not well suited for assessing spatial drainage heterogeneity. Measurements of water storage, however, can provide an indirect measure of impending drainage. We measured seasonal water content at a vegetated capillary barrier on the Hanford Site in southeastern Washington State to determine effective water-content monitoring methods. Measurements were made using ground-penetrating radar (GPR) techniques. Simultaneous measurements using time-domain reflectometry (TDR) and neutron-scattering probe (NP) at multiple depths were used to determine the depth of influence of the GPR ground wave. The GPR depth of influence increased only slightly with decreasing moisture content, ranging from 33 cm to 37 cm. TDR measurements were made using permanently emplaced arrays, eliminating the need for repeated ground disturbance. All three methods showed similar seasonal responses, with the highest water contents observed during the winter months decreasing through the summer. Unlike TDR and NPs, which are point measurements, GPR exhibited much greater spatial variability across the barrier surface. Our results indicate that GPR, in conjunction with automated TDR depth profiles can provide an effective and minimally invasive method for providing high-resolution estimates of soil water content within an engineered barrier.

54 ENVIRONMENTAL SCIENCES↗

Multiple scattering of polarized light in planetary atmospheres. II - Sunlight reflected by terrestrial water clouds.

The intensity and polarization of sunlight reflected by terrestrial water clouds are computed with the doubling method. The calculations illustrate that this method can be effectively used in problems involving strongly anisotropic phase matrices. The method can, therefore, be used to derive information about planetary clouds, including those of the earth, from polarimetric observations. The results of the computations indicate that the polarization is more sensitive than the intensity to cloud microstructure, such as particle size and shape.

Hansen, J. E.↗

Multiple experimental studies of pore structure and mineral grain sizes of the Woodford shale in southern Oklahoma, USA

Pore structure study is an important part of unconventional shale reservoir characterization, since the pore system provides the primary petroleum storage space and fluid flow pathways. Previous studies have suggested that the pore structure is related to the total organic carbon (TOC) content, mineral compositions, and the maturity of the organic matter (OM). However, few studies have focused on the mineral grains, the primary grains being deposited but before cementation, which are the building blocks of shale. Eight Woodford Shale outcrop samples from southern Oklahoma were chosen to study the effects of mineral grain size on the pore structure characterization, using multiple and complementary experimental approaches, including laser diffraction, mineralogy, TOC, pyrolysis, liquid immersion porosimetry, mercury intrusion porosimetry, gas physisorption, (ultra) small angle X-ray scattering, scanning electron microscopy, and spontaneous imbibition. The results from different experiments of eight samples show that the Woodford Shale has the mean mineral grain diameters at 3–6 μm, a wide range of porosity at 3–40% and pore diameters at 50–1,000 nm, and various pore connectivity. Grain size variation was probably caused by the sea-level fluctuation during its deposition, which affect the porosity, pore size distribution, and pore connectivity. With decreasing mineral grain sizes, the porosity tends to increase while the pore connectivity worsens. The results also indicate that OM and carbonates in this low-maturity Woodford Shale could block the pores and decrease the porosity. Coupling with the grain size analyses, the control of depositional environment on grain sizes and subsequent effects on pore structure is identified. The pore structure characteristics over a wide pore-diameter range provided by multiple experiments could improve the understanding of storage space and fluid flow in the Woodford Shale to further increase its petroleum production.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Solvation Environment to Oxidation State and Position in the Early Actinide Period

In this work, the aqueous solvation of U–Pu in the III–VI oxidation states has been examined using density functional theory and hydrated cluster models of the form An(H 2 O) 30 4+/3+ and AnO 2 (H 2 O) 30 2+/+ embedded within a polarizable continuum model to approximate the effect of bulk water. The structural features are compared to available data from extended X-ray absorption fine structure. Then, using a multiple-scattering approach, the X-ray absorption near-edge spectra (XANES) have been simulated and compared to experiment. These structural data are complemented by a detailed thermodynamic analysis using a recently benchmarked protocol. The structural, spectroscopic, and thermodynamic information has been used to assign the primary solvation environments in water, with an emphasis upon understanding how oxidation state and position in the period modifies the hydration number and equilibrium between different solvation shell environments. Tetravalent U is proposed to exist in equilibrium between the 8- and 9-coordinate species. Moving to the right of the period, Np(IV) and Pu(IV) exist solely as the octa-aquo species. Reduction to the trivalent ions leads to thermodynamic favorability for this solvation environment, whose features reproduce the XANES spectra. The actinyl dications (AnO 2 2+ ) of U and Np have a preferred environment in the equatorial plane consisting of 5 solvating waters; however, changes to the ionic radius and electronic structure at Pu leads to an equilibrium between the 4- and 5-coordinate species for PuO 2 2+ . Reduction of the dications to form the monocations generally leads to a preference for the 4-coordinate primary solvation shell, with an equilibrium existing for uranyl, while the neptunyl and plutonyl species exist solely as AnO 2 (H 2 O) 4 + . Finally, these data provide accurate thermodynamic information for several rare species and the combined thermodynamic, structural, and spectroscopic approach reveals trends in hydration behavior across actinide oxidation states and within the early actinide period.

Ions↗

Radial transport modeling of high density deuterium plasmas in proto-MPEX with the B2.5-Eirene code

High density (≥6 × 10 19 m –3 ), low temperature (2–6 eV) helicon discharges in the Prototype Material Plasma Exposure eXperiment (Proto-MPEX) are analyzed with the coupled multifluid plasma, kinetic neutrals code B2.5-Eirene. The interpretative analyses are constrained by data from multiple diagnostics, including Langmuir probes, Mach probes, filterscopes, infrared TV system, Thomson scattering, and baratrons. The objectives of the transport simulations include: investigation of the effects of heating, fueling, and plasma production; pumping, and assumed radial transport models on the calculated density and temperature distributions; plasma flow profiles and power balance. The primary objective in this report is to investigate the effects of the radial transport model in full plasma (the entire length of the plasma column in Proto-MPEX) data-constrained simulations. Results from three assumed forms of the radial transport coefficients are presented, including spatially constant, radially decreasing, and Bohm (D,χ ~T e /|B|). The results from each of the three transport coefficient sets agree qualitatively with the core (near axis) data. With the implicit T e dependence, the Bohm coefficients tend to decrease as functions of radius, although not as strongly as the centrally peaked set. The axial variation in the Bohm coefficients is largely due to the axial structure of the magnetic field. Furthermore, the agreement of the simulations and the diagnostic data with the Bohm set indicates that transport in the plasma column of Proto-MPEX is dominated by Bohm diffusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiphoton interactions in lepton photoproduction on nuclei at high energies

We study multiphoton effects in quantum electrodynamics in lepton photoproduction on heavy nuclei and nuclear medium at high energies. We are interested in energy, charge density, and nuclear geometry dependence of the cross sections. We use the impact parameter representation that allows us to reduce the problem of photoproduction to the problem of propagation of electric dipoles in the nuclear Coulomb field. In the framework of the Glauber model we resum an infinite series of multiphoton amplitudes corresponding to multiple rescattering of the electric dipole on the nucleus. We find that unitarity effects arising due to multiphoton interactions are small and energy independent for scattering on a single nucleus, whereas in the case of macroscopic nuclear medium they saturate the geometric limit of the total cross section. We discuss an analogy between nuclear medium and intense laser beams.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of Cirrus Crystal Shape on Solar Spectral Irradiance: A Case Study for Subtropical Cirrus

Profiles of in situ measurements of ice crystal size distribution of subtropical cirrus were used to calculate solar spectral irradiances above and below the clouds. Spheres and nonspherical ice crystal habits (columns, hollows, plates, bullets, and aggregates) were assumed in the calculations. The simulation results were compared to irradiance measurements from the NASA Solar Spectral Flux Radiometer. The microphysical and radiation data were collected by three aircraft during CRYSTAL-FACE. Two cirrus cases (optical thickness of about 1 and 7) from two mission dates (26 and 23 July 2002) were investigated in detail. The measured downwelling and upwelling irradiance spectra above the cirrus could mostly be reproduced by the radiation model to within +/- 5-10% for most ice crystal habits. Below the cirrus the simulations disagreed with the measured irradiances due to surface albedo variability along the flight track, and nonoptimal colocation between the microphysical and irradiance measurements. The impact of shape characteristics of the crystals was important for the reflected irradiances above the optically thin cirrus, especially for small solar zenith angles, because in this case single-scattering dominated the solar radiation field. For the cirrus of moderate optical thickness the enhanced multiple scattering tended to diminish particular shape features caused by nonspherical single-scattering. Within the ice absorption bands the shape-related differences in the absorption characteristics of the individual nonspherical ice crystals were amplified if multiple scattering prevailed. Furthermore, it was found that below the cloud the shape sensitivity of the downwelling irradiance spectra is larger compared to the nonsphericity effects on reflected irradiances above the cirrus. Finally, it was shown that the calculated cirrus solar radiative forcing could vary by as much as 26% depending on the ice crystal habit.

Wendisch, Manfred↗

Effects of temperature-dependent molecular absorption coefficients on the thermal infrared remote sensing of the earth surface

The effect of temperature-dependent molecular absorption coefficients on thermal infrared spectral signatures measured from satellite sensors is investigated by comparing results from the atmospheric transmission and radiance codes LOWTRAN and MODTRAN and the accurate multiple scattering radiative transfer model ATRAD for different atmospheric profiles. The sensors considered include the operational NOAA AVHRR and two research instruments planned for NASA's Earth Observing System (EOS): MODIS-N (Moderate Resolution Imaging Spectrometer-Nadir-Mode) and ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer). The difference in band transmittance is as large as 6 percent for some thermal bands within atmospheric windows and more than 30 percent near the edges of these atmospheric windows. The effect of temperature-dependent molecular absorption coefficients on satellite measurements of sea-surface temperature can exceed 0.6 K. Quantitative comparison and factor analysis indicate that more accurate measurements of molecular absorption coefficients and better radiative transfer simulation methods are needed to achieve SST accuracy of 0.3 K, as required for global numerical models of climate, and to develop land-surface temperature algorithms at the 1-K accuracy level.

Wan, Zhengming↗