Search NASA⌕ Search

SEARCH · Search NASA

Results for “open circuit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Mathematical Framework Underlying the In Situ Electrochemical Diagnosis of Adsorbed Intermediates Formed during Redox Reactions at Electrode Surfaces

Previously, we have presented an electrochemical technique wherein an electroactive tracer species is employed to probe the rate-limiting factors governing redox reactions at an electrode surface. In this technique, the electrode is first held potentiostatically to facilitate a redox process (step 1), and then the potential is released to open circuit conditions (step 2) so as to monitor the time-dependent re-equilibration of the electrode potential in the presence of the tracer. The time-dependent potential response in step 2 has been shown to contain information about diffusion—limited or desorption—limited steps, enabling in situ probing of the electrochemistry at the electrode surface during step 1. In the present contribution, a theoretical model governing the transient response in step 2 is developed for two limiting cases: diffusion—limited and desorption—limited recovery of the electrode potential. Mathematical modeling shows that, during re-equilibration, the step 2 potential transient corresponding to a case where step 1 involves surface adsorbed species which undergo desorption in step 2 exhibits a much longer time constant than that when re-equilibration occurs under diffusion limitations. The mathematical framework presented herein provides a sound fundamental basis for applying the aforementioned technique to studying adsorption-desorption processes during electrochemistry. Also, technique limitations are presented in light of the modeling findings.

25 ENERGY STORAGE↗
DOE OSTI2023

Physics-Based Model to Represent Membrane-Electrode Assemblies of Solid-Oxide Fuel Cells Based on Gadolinium-Doped Ceria

This paper reports a physics-based model that predicts membrane-electrode assembly (MEA) performance of solid-oxide fuel cells (SOFCs) with Ce 0.9 Gd 0.1 O 2− δ (GDC10) electrolyte membranes. The paper derives self-consistent thermodynamic and transport properties for GDC1o mobile charged defects (oxide vacancies and reduced-ceria small polarons) by fitting published measurements of oxygen non-stoichiometry and conductivity over ranges of temperature and O 2 partial pressures. The button-cell model is applied to evaluate how mixed ionic-electronic conductivity influences the performance of an SOFC MEA with a GDC10 electrolyte sandwiched between a porous, composite Ni-GDC10 anode and a porous, composite cathode of Sm 0.5 Sr 0.5 CoO 3− δ (i.e., SSC) and GDC10. SSC properties are also derived by fitting published conductivity and oxygen non-stoichiometry measurements. Mixed conductivity of GDC10 and competing charge transfer reactions at both electrodes reduce open circuit voltages due to leakage current and buildup of defect concentrations at electrode-electrolyte interfaces. To fit polarization data, the button-cell model includes heterogeneous reaction rates for defect incorporation on the GDC10 surface along with Butler–Volmer expressions derived for competing charge transfer reaction rates from rigorous analyses assuming rate-limiting, elementary charge transfer reactions for each electrode. The calibrated MEA model can support rigorous SOFC modeling with GDC10 electrolytes over the range of conditions within a fully operating cell.

Electrochemistry↗
DOE OSTI2023

Understanding the Degradation of La 1−x Sr x FeO 3−δ (0 ≤ x ≤ 1) Perovskite Oxides during the Oxygen Evolution Reaction in Alkaline Solution

Perovskite oxides are an emerging class of highly active catalysts for the oxygen evolution reaction (OER); however, their electrochemical stability remains poorly understood. Here, we report a systematic evaluation of the OER activity and stability of La 1−x Sr x FeO 3-δ perovskites in 1 M KOH. Their initial OER activity first increases with increasing Sr content (fromx= 0 to 0.8), and then decreases when the Sr content is increased to 1. Their stability evaluated by monitoring the element leaching from the electrodes show that La does not leach at a detectable rate, but Sr and Fe leach substantially. The leaching of Sr occurs at similar rates under open circuit potential (OCP) and OER potential, suggesting a nonelectrochemical dissolution process. The leaching of Fe is, however, strongly dependent on the electrode potential. More Fe leaching is observed under the OER potential than OCP. Additionally, the electrode with higher initial OER activity leaches more Fe. These results indicate that OER facilitates the dissolution of Fe from the electrode. The leaching of Fe, in turn, is considered responsible for the activity loss of La 1-x Sr x FeO 3−δ during OER. This study brings new insight into the degradation mechanism of La 1-x Sr x FeO 3−δ and their related perovskite oxides during electro-oxidation processes.

Electrochemistry↗
DOE OSTI2023

Electrochemical Measurement of Water Transport Numbers in Anion-Exchange Membranes

Anion-exchange membranes (AEMs) are a possible replacement for perfluorosulfonic-acid membranes in energy-conversion devices, primarily due to the hydroxide mobile ion allowing the devices to operate in alkaline conditions with less expensive electrocatalysts. However, the transport properties of AEMs remain understudied, especially electro-osmosis. In this work, an electrochemical technique, where the open-circuit voltage is measured between two ends of a membrane maintained at different relative humidities, is used to determine the water transport number of various ionomers, including Versogen and Sustainion AEMs and Nafion cation-exchange membrane (CEM), as a function of water content and temperature. In addition, the CEMs and AEMs are examined in differing single-ion forms, specifically proton and sodium (CEM) and hydroxide and carbonate (AEM). Carbonate-form AEMs have the highest transport number (∼11), followed by sodium-form CEMs (∼8), hydroxide-form AEMs (∼6), and proton-form CEMs (∼3). Finally, a multicomponent transport model based on the Stefan-Maxwell-Onsager framework of binary interactions is used to develop a link between water transport number and water-transport properties, extracting a range for the unmeasured membrane water permeability of Versogen as a function of water content.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Solid Electrolyte Interphase Formation at the Ionic Liquid Electrolyte—Lithium-Metal Interface Using an Ab Initio Molecular Dynamics Approach

An interfacial study is performed using ab initio molecular dynamics (AIMD) simulations to elucidate the electrochemical interfacial stability of an ionic liquid (IL) as component of an electrolyte in contact with a Li-metal anode when an additive, vinylene carbonate (VC), is added to the electrolyte. The IL electrolyte is composed of 1-butyl-1-methylpyrrolidinium bis(fluoro-sulfonyl)-imide (PYR14 + FSI − ) with lithium bis(trifluoromethane-sulfonyl)imide salt (Li + TFSI − ) in a 8:2 concentration ratio. Reactions observed at the interface electrolyte/Li-metal during the AIMD simulations are verified by electronic structure calculations using density functional theory calculations considering a continuum solvent model. We found that the addition of VC to the IL prevents further reduction of the counter-ion TFSI − and retards reduction of FSI − in comparison to the case when the additive VC is absent. The PYR14 + reduction is never observed with or without the additive. The 1st, 2nd, and 3rd electron affinities of the PYR14 + are −0.08, −0.36 and −3.65 eV, indicating little to large repulsive behavior against electrons. The opposite is observed for the two negative ions, FSI − and TFSI − , which yield 1st electron affinities of 1.73 and 1.83 eV, respectively. Reactions obtained under open circuit conditions. Dissociation mechanisms are presented for all IL components reduced at the IL/Li-metal interface.

Electrochemistry↗
DOE OSTI2024

Nano Scale Poly(vinylidene chloride-co-acrylonitrile) Protection for Reversible and Stable Mg Anode Interface

This study investigates the efficacy of a polymer coating, PVdC-co-AN, in enhancing the stability and reversibility of the electrochemical Mg anode interface. Coated electrodes, immersed in a 0.25 M Mg(TFSI) 2 −0.50 M MgCl 2 /dimethoxyethane (DME) electrolyte, exhibit notable improvements. Cyclic voltammetry demonstrates consistent behavior with the coated electrode, while the uncoated electrode changes dramatically. During extended open circuit potential conditions, the coated electrode maintains much higher coulombic efficiency (93%) compared to the uncoated electrode (62%). Galvanostatic cycling test over 200 cycles further show the benefits of the PVdC-co-AN coating, decreasing the overpotential of Mg plating and improving long-term stability. The coated electrodes also demonstrate improved rate capability at higher current densities. Surface analysis reveals differences in the formation of byproducts between the coated and uncoated electrodes, indicating a more stable and uniform interface in the former. Nuclear magnetic resonance (NMR) spectroscopy suggests that the polymer influences ion mobility through tuning the solvation environments which results in better kinetics and fewer byproducts. In summary, the study affirms that the PVdC-co-AN coating significantly improves the stability and performance of Mg electrochemistry, offering a promising advancement for practical battery applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Stability of a Ni/NiF 2 Reference Electrode with a Metallic Membrane for Use in Molten Fluoride Salts

In this study, an experimental high-temperature fluoride salt reference electrode (RE) developed by HiFunda LLC was tested in molten FLiNaK at 550 °C. The high-temperature reference electrode (HTRE), based on the Ni/NiF 2 redox couple, was tested over a period of 13 d for short-term stability, long-term stability, and electrochemical analysis capabilities. The HTRE was tested using open circuit potentiometry (OCP), cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS). The HTRE reference potential was measured against changes in salt composition by increasing FeF 2 concentrations in the melt across six additions from 0 to 0.1 mol% FeF 2 . The long-term stability of the electrode was then tested over ten days at a constant composition of 0.1 mol% FeF 2 . OCP, SWV, and CV were used to calculate an average potential drift between 7–10 mV per day. Using CV and SWV, the number of electrons transferred for iron reduction and the diffusion coefficient of Fe 2+ were measured.

Electrochemistry↗
DOE OSTI2024

Significant Improvements to Si Calendar Lifetime Using Rapid Electrolyte Screening via Potentiostatic Holds

Silicon-based lithium-ion batteries exhibit severe time-based degradation resulting in poor calendar lives. This has been identified as the major impediment towards commercialization with cycle life considered a solved issue through nanosizing and protective coatings allowing over 1000 cycles of life to be achieved. In this work, rapid screening of sixteen electrolytes for calendar life extension of Si-rich systems (70 wt% Si) is performed using the voltage hold (V-hold) protocol. V-hold significantly shortens the testing duration over the traditional open circuit voltage reference performance test allowing us to screen electrolytes within a span of two months. We find a novel ethylene carbonate (EC) free electrolyte formulation containing lithium hexafluorophosphate (LiPF 6 ) salt, and binary solvent mix of fluoroethylene carbonate (FEC), ethyl methyl carbonate (EMC) that extends calendar life of Si cells as compared to conventional EC based electrolyte. Our coupled experimental-theoretical analysis framework provides a decoupling of the parasitic currents during V-hold, allowing us to extrapolate the capacity loss to predict semiquantitative calendar lifetimes. Subsequently, cycle aging and oxidative stability tests of the EC free system also show enhanced performance over baseline electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2025

Membrane Thickness Impact on Chemical Degradation Rates

Abstract A comprehensive investigation of PFSA membrane chemical degradation rates as a function of thickness (8-20 µm) is reported. The two-pronged study was conducted on bare membranes and as components of chemically-mitigated and mechanically-reinforced, state-of-the-art (SOA) membrane electrode assemblies (MEAs). The bare membranes were subjected to H2O2 vapor test and MEAs were degraded under OCV conditions, both at 90°C. Both test types employed fluoride release rates (FRR) to monitor chemical degradation rates. Vapor tests revealed that area-specific degradation rates were positively correlated with membrane thickness, but thickness normalized degradation rates were independent of thickness. Open-circuit voltage (OCV) investigations spanning the membrane thickness series of MEAs was probed via a 27-experiment 3(4-1) fractional factorial experimental design. Statistical analysis of the FRR values revealed that chemical degradation rates were dominated by the relative humidity value and that the area-specific degradation rates of MEAs were independent of membrane thickness. The OCV chemical durability insensitivity to membrane thickness is supported by on-load membrane chemical durability studies at the stack level. The results suggest that ,despite smaller ionomer inventory, SOA thin membranes and MEAs are not greatly disadvantaged relative to thicker membranes from a chemical durability perspective, provided oxidative stress levels are controlled throughout application lifetime.

Coms, Frank D. (ORCID:0000000249160350)↗
DOE OSTI2025

Harnessing Redox-Active Molecules in Alkylammonium Halide-Based Eutectic Solvents for Redox Flow Batteries

Redox flow batteries (RFBs) are promising for large-scale energy storage, however, advancements in performance and cost-effectiveness are critical factors for adoption. Here we report on alkylammonium halide based eutectic solvents (ESs) and found that a ESs comprising of diethylammonium chloride or bromide, in ethylene glycol demonstrated exceptional stability and a wide electrochemical stability window, making it a promising candidate for RFB applications. The electrochemical stability and redox behavior of the alkylammonium halide-based ESs are significantly influenced by hydrogen-bonding interactions, modulated by the alkyl chain length of the cation and the nature of the anion. A redox-active eutectic electrolyte containing 0.45 M methyl viologen dichloride (MV 2+ ) paired with acetylferrocene exhibited reversible redox behavior with a maximum open-circuit voltage of ∼1.34 V. The first redox couple, representing the viologen dication to radical cation transition, exhibited remarkable stability with consistent performance, achieving an energy efficiency near 70% at charge-discharge current densities of 10 mA cm −2 over 160 cycles with about 3% loss of the initial capacity. This study highlights the potential of alkylammonium halide DES systems for implementing eutectic-based RFB technologies in the future.

25 ENERGY STORAGE↗
DOE OSTI2025

Effect of Soluble Corrosion Products on Electrical Double Layer in LiCl-KCl Molten Salts

Corrosion in molten salts greatly hampers the application for renewable energy applications like molten salt reactors. To develop effective strategies for corrosion mitigation, understanding the interfacial structures and properties such as specific ion adsorption and electrical double layer capacitance are crucial. Using cyclic voltammetry and electrochemical impedance spectroscopy, we systematically studied the interfaces on various model electrodes including W (solid), Bi (liquid), and the stainless steel 316 in LiCl-KCl eutectic molten salts with the addition of corrosion species CrCl 2 and FeCl 2 . Both Cr 2+ and Fe 2+ ions increased electrical double layer capacitance, with Cr 2+ showing specific adsorption behavior and shifting the potential of zero charge, while Fe 2+ had minimal effect on point of zero charge. Two-working electrode measurements revealed increasing open-circuit potential and electrical double layer capacitance during the exposure of stainless steel 316, indicating its progressive corrosion and ion accumulation at the interface. X-ray photoelectron spectroscopy and Raman confirmed Cr enrichment at the interface. This work highlights the strong correlation between electrical double layer behavior and corrosion dynamics in molten salts and suggests electrical double layer capacitance as a sensitive, in situ indicator for corrosion monitoring.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Membrane Degradation in PEM Fuel Cells: Part I. Modeling Gas Crossover and the Pt Band

Understanding chemical degradation of the proton-exchange membrane in fuel cells is crucial for extending their lifetimes. Herein, various degradation reactions reported in literature are organized and analyzed, including direct radical generation and an indirect (Fenton) pathway. To understand the transport of dissolved H 2 and O 2 crossover gases as they relate to membrane degradation, an agglomerate-scale model is introduced, treating gas, ionomer, and catalyst as discrete phases. The model reveals a key phenomenon: at working potentials, dissolved gases are mostly consumed at the interface between the catalyst layer and the membrane, leaving little gas to cross the membrane. Under open-circuit conditions, dissolved gases are not consumed and can then cross the membrane. This explains high H 2 O 2 concentrations and degradation rates seen in experiments but not captured in previous models. Following mixed-potential theory, crossover gases supply the hydrogen-oxidation and oxygen-reduction reactions, which occur simultaneously on individual Pt particles comprising the Pt band in the membrane, forming reactive species (H 2 O 2 , OH·). Results show crossover gas almost entirely reacts on the Pt band, allowing little to reach the opposite electrode. Furthermore, the micro-scale geometry of the catalyst-layer/membrane interface impacts the gas crossover at working potentials, indicating that cell construction affects membrane durability.

Johnson, Evan F. [Lawrence Berkeley National Labor↗
DOE OSTI2026

Binder-Stabilized Carbon Fiber Hosts for High-Utilization Sodium–Polysulfide Flow Catholytes

Sodium-sulfur (Na-S) batteries hold promise as high-energy-density batteries for long-duration energy storage due to their high open circuit voltage and Earth-abundant active materials. However, low utilization of the sulfur active material limits the achievable specific capacity, especially when a liquid polysulfide catholyte is utilized. High-surface-area carbon materials demonstrate promise to increase sulfur utilization in a Na-S battery. To make the carbon host material applicable for a flow battery application, a binder is required to bind the carbon materials together and to a porous substrate. Here, we utilize a composite carbon paper electrode coated by polymer,carbon nanofibers (CNFs) and carbon black (CB). By varying the mass ratios of CNF to CB, we found that a 70/20/10 mass ratio of CNF/CB/binder provided the highest capacity (260 mAh g −1 compared to the baseline of 156 mAh g −1 ) and stable battery performance over 100 cycles. Analysis of the composite electrode and full cells reveals that the amount of CB in the composite electrode influences binder distribution, cell resistance, and full cell performance.

Lehmann, Michelle L. [Oak Ridge National Laborator↗
DOE OSTI2019

Fast Charging of Li-Ion Cells: Part III. Relaxation Dynamics and Trap-Controlled Lithium Ion Transport

Fast charging of Li-ion batteries would ease consumer concerns regarding refueling time of electric vehicles. In this series of articles, we are systematically examining the effects of high currents flowing through the cell. Here we consider open-circuit relaxation dynamics for cell voltage and individual electrode potentials after abrupt termination of steady-state charging currents (1-6C) or short current pulses (< 30 s) of either polarity (to 16C). We demonstrate that dispersive kinetics observed after these current perturbations become faster for higher currents applied before the rest period. Our observations indicate that the voltage relaxation behaviors (i) depend on the current during charge, and less so on the state of charge, (ii) display universal stretched-exponential kinetics, (iii) can be induced by a short current pulse, (iv) require a minimum amount of charge transfer during the pulse, and (v) originate mainly from the oxide cathode. Trap controlled Li + ion transport through a partially disordered oxygen-depleted subsurface layer in the cathode is suggested as a possible origin for the relaxation behavior. The slow multidecadal responses to high currents can cause the nonlinearities observed during rapid charging of the electrochemical cells, reported in Part 2 of this series.

25 ENERGY STORAGE↗
DOE OSTI2022

Study of Potentiometry for Monitoring Activity of GdCl 3 in Molten LiCl-KCl Salt

In pyroprocessing spent nuclear fuels by electrorefining in molten LiCl-KCl salt, it is desired to monitor in real time the UCl 3 concentration in the salt for safeguards purposes. Current chemical analysis of the highly radioactive salt for electrorefining by an inductively coupled plasma technique is inconvenient and usually time-consuming in generating the salt composition results. In this paper, we evaluated whether a simple potentiometry approach can be used for real-time monitoring the concentration of GdCl 3 , which was used as a surrogate for UCl 3 , in LiCl-KCl-GdCl 3 salt by measuring the open circuit potential of a Gd metal electrode with respect to a Ag/AgCl reference electrode (RE) when GdCl 3 salt was incrementally added to the LiCl-KCl salt. Additions of LaCl 3 , CeCl 3 and NdCl 3 salts were used for evaluating the effects of other chloride salts on the selectivity of the Gd metal electrode vs Ag/AgCl RE. While using potentiometry to determine GdCl 3 concentrations, Gd metal was unexpectedly observed to be unstable and dissolved in LiCl-KCl salt when GdCl 3 is present.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

String Length Calculator v0.0.3

The string length calculator simplifies the choice of string length for photovoltaic power plants. It uses open source tools to model the system open-circuit voltage over time based on established approaches used in the field by principal engineers and suggests a string length.

Jain, Anubhav↗
DOE OSTI2022

iv_parems [SWR-22-79]

iv_parems follows the ASTM E1036 standard to extract parameters (open-circuit voltage, short-circuit current, maximum power point) from photovoltaic current-voltage characteristics.

Deceglie, Michael↗
DOE OSTI2024

Three-point Analysis for Butler-Volmer Electrochemical Kinetics

This file contains a spreadsheet and equations that evaluate corrosion test data. The data (which can be inserted by the user) is current vs voltage data. This spreadsheet will be part of the supplemental information of a journal article that is under review. Specifically, the spreadsheet evaluates the classical Butler Volmer equation in the presence of several different forms of noise found in electrochemical systems. The forms of noise are: 1) solution resistance, 2) random noise in the current, 3) drift of the open circuit potential voltage.

Cho, Seongkoo [Lawrence Livermore National Laborat↗