Search NASA⌕ Search

SEARCH · Search NASA

Results for “pressure dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structure and equation of state of Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ from x-ray diffraction to megabar pressures

Pressure is a unique tuning parameter for probing the properties of materials, and it has been particularly useful for studies of electronic materials such as high-temperature cuprate superconductors. In this work we report the effects of quasihydrostatic compression produced by a neon pressure medium on the structures of bismuth-based high-T c cuprate superconductors with the nominal composition Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ (n=1, 2, 3) up to 155 GPa. The structures of all three compositions obtained by synchrotron x-ray diffraction can be described as pseudotetragonal over the entire pressure range studied. We show that previously reported pressure-induced distortions and structural changes arise from the large strains that can be induced in these layered materials by nonhydrostatic stresses. The pressure-volume equations of state (EOS) measured under these quasihydrostatic conditions cannot be fit to single phenomenological formulation over the pressure ranges studied, starting below 20 GPa. This intrinsic anomalous compression as well as the sensitivity of Bi 2 Sr 2 Ca n-1 Cu n O 2n+4+δ to deviatoric stresses provide explanations for the numerous inconsistencies in reported EOS parameters for these materials. We conclude that the anomalous compressional behavior of all three compositions is a manifestation of the changes in electronic properties that are also responsible for the remarkable nonmonotonic dependence of T c with pressure, including the increase in T c at the highest pressures studied so far for each. Transport and spectroscopic measurements up to megabar pressures are needed to fully characterize these cuprates and explore higher possible critical temperatures in these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Voltage and cathode emission mechanisms of a magnetized, constricted, orbiting plasma in helium 6.7–850 Pa

Abstract We present a semiquantitative description of several important properties of a magnetized cold-cathode plasma in helium over a wide pressure range 6.7–850 Pa. We focus on the ‘constricted orbiting’ mode where the plasma attaches to the cathode as a moving ‘dot’ and the voltage and rate of cathode erosion are both unusually low. We propose that the low plasma voltage and observed motion of the plasma adjacent to the cathode can be attributed to field emission as the source of electrons from the cathode, a process that is aided by the charging of an oxide film by ions. We find that the observed dependence of plasma voltage on pressure is consistent with the assumption that the axial electric field must increase in regions of strong crossed magnetic field to maintain current continuity.

Physics↗
DOE OSTI2020

EVALUATION OF PRESSURE DROP CORRELATIONS FOR THE WIRE-WRAPPED ROD BUNDLES

The accurate prediction of pressure drop in the fuel rod bundle is of importance for the design and thermal-hydraulic analysis of nuclear reactor system. Due to very complex geometry of wire-wrapped fuel rod bundle geometry for the Sodium Fast Reactor (SFR), a simple method using hydraulic (equivalent) diameter is not sufficient to predict the pressure drop of rod bundle accurately. For several decades, many experimental works have been performed to develop an accurate correlation for wire-wrapped fuel bundle friction factor. In these works, the friction factor correlation of wire-wrapped fuel bundle has been developed as a function of Reynolds number of the flow and the design parameters such as fuel pin diameter, wire diameter, rod pitch, and wire lead length. The Cheng and Todreas correlations are well-known and used in many subchannel analysis code, such as CADET, TRIO-U, MATRA-LMW, SE2-ANL, etc. Novendstern model, Rehme model, Baxi and Dalle Donne model are also well-known and widely referred. Computational Fluid Dynamics is another typical approach to predict the pressure drop of wire-wrapped fuel rod bundle, but it requires the model validation because the accuracy of pressure drop prediction by the CFD simulation depends on what turbulence model is employed. The present work aims at evaluating the existing pressure drop correlations for the wire-wrapped fuel rod bundle and evaluating the pressure drop of 217-pin rod bundle by the CFD analysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Sensitivity study of hydrogen Soret transport in yttrium Hydride-Based nuclear fuel

Yttrium hydride is an excellent solid neutron moderator material for high temperature nuclear reactor applications due to its high hydrogen density and exceptional hydride stability at high temperatures. Despite these attractive characteristics, the details of how hydrogen behaves within yttrium hydride while temperature gradients exist are still not well understood. The evolution of the hydrogen composition profile resulting from a temperature gradient requires knowledge of hydrogen’s heat of transport, a critical parameter that has not yet been measured for this material. In this work, we perform hydride redistribution, hydrogen dissociation, and hydrogen leakage calculations while varying the Soret heat of transport of hydrogen in yttrium hydride to elucidate the sensitivity of hydride stability under temperature gradients to this parameter. This study analyzes hydride stability of a hypothetical uranium-yttrium hydride nuclear fuel design during operation of a high temperature liquid metal-cooled nuclear reactor. Assuming U-YH x could be fabricated in a physically stabilized manner, this fuel system can likely maintain hydride stability while operating at very high power densities and temperatures. We find that even though the hydrogen dissociation pressure in the gas gap does vary by several percent as the heat of transport temperature parameter is varied, the hydrogen content in the U-YH x fuel meat is relatively insensitive to this parameter over the course of a high burnup fuel cycle; this is due to yttrium hydride’s excellent hydrogen retention under the high temperature conditions considered here. Here, this suggests that hydride stability analyses are insensitive to the value of the Soret heat of transport in U-YH x under steady state liquid metal-cooled reactor conditions. However, the susceptibility to internal gas overpressurization-induced stress-rupture of the cladding during a high temperature transient is more sensitive to this parameter due to the non-linear dependence of hydrogen gas dissociation pressure vs. composition and temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Controlling phase transitions in MnNiGe using thermal quenching and hydrostatic pressure

Here, the phase transitions in MnNiGe compounds were explored by manipulating the heat treatment conditions and through hydrostatic pressure application. As the quenching temperature increased, both the first-order martensitic structural transition temperatures and magnetic transition temperatures decreased relative to those in the slowly-cooled samples. When the samples were quenched from 1200 °C, the first-order martensitic structural transition temperature lowered by more than 200 K. The structural transitions also shifted to lower temperature with the application of hydrostatic pressure during measurement. Temperature-dependent x-ray diffraction results reveal that the changes of the cell parameters resulting from the structural transitions are nearly identical for all samples regardless of the extensive variation in their structural transition temperatures. In addition, neutron scattering measurements confirm the magnetic structure transition between simple and cycloidal spiral magnetic structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Kinetics and Reactor Modeling of VFA Ketonization for Sustainable Aviation Fuel Production

Ketonization of volatile fatty acids (VFAs) produced via arrested methanogenesis of wet waste represents the only unit operation of wet waste upgrading to sustainable (net-zero or negative life cycle CO2 emissions) aviation fuel not currently in industrial practice. Ketone product yields of close to 100% have been obtained during gas-phase reactions of VFAs over oxide catalysts at the laboratory scale, but design of an industrial ketonization reactor requires understanding of the impacts of reactant and product partial pressures, deactivation, and heat and mass transport phenomena on observed ketonization rates. Our work leverages rigorous kinetic analysis of ketonization processes to inform reactor scale-up efforts through packed-bed reactor modeling. We first present results of a kinetic study of ketonization of a model VFA, hexanoic acid, over an industrial ZrO2 catalyst performed in a packed-bed microreactor in conditions free of significant heat or mass transfer gradients. Major findings of the analysis include: (i) hexanoic acid saturates all catalyst active sites at relatively low partial pressure (~10 kPa) and (ii) ketonization products 6-undecanone, water, and CO2 inhibit reaction rates. Kinetic data are used to fit a rate expression quantifying the functional dependence of ketonization rate on partial pressures of VFA reactants and ketone, water, and CO2 products. A packed-bed reactor model describing vapor-phase hexanoic acid ketonization over ZrO2 extrudate catalysts is developed based on the kinetic model. The effects of (i) bed- and pellet-scale mass- and heat-transfer limitations and (ii) axial pressure drop guide our development of recommendations for optimal sizing, temperature, and influent flow composition of an industrial-scale ketonization reactor. The quantitative understanding of VFA ketonization developed in this study represents an advance toward derisking the VFA ketonization step of wet waste upgrading to sustainable aviation fuel.

biojet↗
DOE OSTI2022

Mechanism for Acetone and Crotonaldehyde Production during Steam Reforming of Ethanol over La 0.7 Sr 0.3 MnO 3–x Perovskite: Evidence for a Shared C4 Aldol Addition Intermediate

Here a mechanistic study was conducted on the catalytic conversion of ethanol over La 0.7 Sr 0.3 MnO 3–x perovskite catalysts in the presence and absence of water. The study sought insights into the path of C–C coupling toward acetone and crotonaldehyde and also into clarifying whether the lack of previous reports of C–C coupling over La 0.7 Sr 0.3 MnO 3–x (100) could be due to a “pressure gap”. Several types of experiments were performed at 400–800 K: flow experiments with a torr range reactant gas flown over La 0.7 Sr 0.3 MnO 3–x powders; ultra-high vacuum experiments with continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample; and torr range continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample. When ethanol and water were flown over La 0.7 Sr 0.3 MnO 3–x powders at 400–800 K, the products detected were ethene, acetaldehyde, acetone, crotonaldehyde, CO, CO 2 , and H 2 . Acetone was catalytically produced over both the La 0.7 Sr 0.3 MnO 3–x powder and the La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample at temperatures of 700–800 K when reaction conditions were on the order of 1 Torr of reactant gas and with an excess of water relative to ethanol (1 ethanol/9 water). Isotopic labeling with deuterium was used to gain insights into the C–C coupling reaction mechanism and paths in species with three and four carbons (C 3 and C 4 species). Additionally, steady-state isotopic transient kinetic analysis (SSITKA) experiments + simulations using carbon labeling of the ethanol feed were performed. Three mechanistic paths were considered for the C–C coupling step: the first two paths, A and B, involve coupling between two intermediates which are both in oxygen vacancies; and the third path, C, involves coupling between one intermediate in an oxygen vacancy and one intermediate outside of an oxygen vacancy. The results suggest that the dominant path to the C 3 product, acetone, depends on the conditions. The less active path (attributed to path A or B) occurs at 600–700 K and involves coupling between two irreversibly bound species. The more active path (attributed to path C) requires an excess of water, becomes dominant at 600–800 K, and involves coupling between one irreversibly bound species and one reversibly bound species. Based on these various observations from experiments and simulations, an elementary step is proposed for acetone formation involving a previously unreported C 4 transition state that is formed after aldol addition. Density functional theory calculations were performed based on this hypothesis, and it confirmed that this specific and previously unreported aldol addition path to acetone does exist and that this path consistent with the experimental data. In this path, C–C formation occurs to create a C 4 intermediate that is bound to an oxygen vacancy, then a hydrogen transfer with C–C bond breaking occurs that results in the production of the acetone molecule. The proposed mechanism is also consistent with the experimental observation that acetone formation has a greater than first-order dependence on the water vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental observations of multiple modes of filamentary structures in the magnetized dusty plasma experiment (MDPX) device

Due to the small charge-to-mass ratio of dust particles, it is often necessary to use large magnetic fields of B ≥ 1 T, in order to observe the influence of magnetic forces in laboratory dusty plasmas. However, when experiments are performed at high magnetic fields in capacitively coupled, radio frequency discharges used for these dusty plasma experiments, the plasma is often observed to form filamentary structures between the electrodes that are aligned to the external magnetic field which disrupt the uniformity of the plasma and adversely impact some of our dusty plasma experiments. Recent experiments performed in the Magnetized Dusty Plasma Experiment device seek to identify and characterize these filamentary structures. This paper discusses the morphology of several distinct filamentary modes that are formed in low temperature argon plasmas. Three different spatial modes of filaments that appear to be strongly dependent on the magnetic field and neutral pressure are identified. There is strong evidence that each spatial mode has a threshold condition that is dependent on the ion Hall parameter. The criteria for the formation of the filaments are shown to be consistent with predictions of recent numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

CO as a substrate and inhibitor of H + reduction for the Mo-, V-, and Fe-nitrogenase isozymes

Three known nitrogenase isozymes, Mo-, V-, and Fe-, catalyze biological reduction of dinitrogen (N 2 ) to ammonia (NH 3 ). All three utilize the same reductive elimination mechanism: an intermediate with two metal-bound hydrides reductively-eliminates hydrogen gas (H 2 ) in a reaction coupled to binding and activation of N 2 . Nonetheless, the three isozymes show dramatically different relative rates of H 2 formation and N 2 reduction, revealing important differences in reactivity with substrates. Carbon monoxide (CO) has been characterized as both an inhibitor and substrate for Mo- and V-nitrogenases, but not for the Fe-nitrogenase. In this work, we present a comparative study of the reactivity of the three isozymes with CO, examining CO both as a substrate and as an inhibitor of proton (H + ) reduction under steady-state conditions. For Mo-nitrogenase, there is neither detectable reduction of CO nor inhibition of H + reduction. Fe- and V-nitrogenase show CO reduction and inhibition of H + reduction that depends on the CO partial pressure. For V-nitrogenase, ethylene (C 2 H 4 ) is the major reduction product with a maximum specific activity of ~7.5 nmol C 2 H 4 /nmol VFe protein/min at 1 atm CO. The major product of CO reduction for Fe-nitrogenase is methane (CH 4 ) with a maximum specific activity of ~4.8 nmol CH 4 /nmol FeFe protein/min at 0.05 atm CO. The rate of CH 4 production by Fe-nitrogenase progressively increases to a maximum at 0.05 atm CO and then declines to ~10% with increasing CO partial pressure up to 1 atm. CO does not inhibit proton reduction in Mo-nitrogenase but shows 16% inhibition for V-nitrogenase and 35% for Fe-nitrogenase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pore-scale simulation of gas flow in microscopic permeable media with complex geometries

Lattice Boltzmann method (LBM) is an efficient tool to perform direct numerical simulation of gas flow in micro-size pores. Despite great advances in LBM and its use in describing gas flow in micro-size channels in slip and transitional flow regimes, exploring formulations that are able to capture flow behavior in domains with complex boundary geometries remains a challenging task. As a result, the impact of complexities in pore structures on gas flow may not be fully explored using LBM. In this study, we propose to use the combined bounce-back and Maxwellian diffusive reflection scheme to capture the slip velocity with a new set of slip coefficients. Optimal values of slip coefficients are determined using a gradient based method, where the results from the linearized Boltzmann equation is used as the reference solution. The proposed formulation is further validated against predictions from molecular dynamics simulation in the presence of complex geometries by introducing obstacles of different shapes in straight channels. LBM with the proposed boundary treatment is then used to investigate gas flow in a synthetic microscopic permeable medium. Here, results indicate that gas exhibits different flow configurations as Knudsen number varies, and apparent gas permeability appears to have up to a second-order dependency on the reciprocal mean pressure in slip and transitional flow regimes.

03 NATURAL GAS↗
DOE OSTI2020

Influence of pilot-fuel mixing on the spatio-temporal progression of two-stage autoignition of diesel-sprays in low-reactivity ambient fuel-air mixture

The spatial and temporal locations of autoignition for direct-injection compression-ignition engines depend on fuel chemistry, temperature, pressure, and mixing trajectories in the fuel jets. Dual-fuel systems can provide insight into both fuel-chemistry and physical effects by varying fuel reactivities and engine operating conditions. In this context, the spatial and temporal progression of two-stage autoignition of a diesel-fuel surrogate, n-heptane, in a lean-premixed charge of synthetic natural-gas (NG) and air is imaged in an optically accessible heavy-duty diesel engine. The lean-premixed charge of NG is prepared by fumigation upstream of the engine intake manifold. Optical diagnostics include high-speed (15kfps) cool-flame chemiluminescence-imaging as an indicator of low-temperature heat-release (LTHR) and OH* chemiluminescence-imaging as an indicator high-temperature heat-release (HTHR). NG prolongs the ignition delay of the pilot fuel and increases the combustion duration. Zero-dimensional chemical-kinetics simulations provide further understanding by replicating a Lagrangian perspective for mixtures evolving along streamlines originating either at the fuel nozzle or in the ambient gas, for which the pilot-fuel concentration is either decreasing or increasing, respectively. The zero-dimensional simulations predict that LTHR initiates most likely on the air streamlines before transitioning to HTHR, either on fuel-streamlines or on air-streamlines in regions of near-constant φ. Due to the relatively short pilot-fuel injection-durations, the transient increase in entrainment near the end of injection (entrainment wave) is important for quickly creating auto-ignitable mixtures. To achieve desired combustion characteristics, e.g., multiple ignition-kernels and favorable combustion phasing and location (e.g., for reducing wall heat-transfer or optimizing charge stratification), adjusting injection parameters could tailor mixing trajectories to offset changes in fuel ignition chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Growth of Hexagonal Boron Nitride from Molten Nickel Solutions: A Reactive Molecular Dynamics Study

Metal flux methods are excellent for synthesizing high-quality hexagonal boron nitride (hBN) crystals, but the atomic mechanisms of hBN nucleation and growth in these systems are poorly understood and difficult to probe experimentally. Here, we harness classical reactive molecular dynamics (ReaxFF) to unravel the mechanisms of hBN synthesis from liquid nickel solvent over time scales up to 30 ns. These simulations mimic experimental conditions by including relatively large liquid nickel slabs containing dissolved boron and a molecular nitrogen gas phase. Overall, the reaction takes place almost exclusively on the surface of the liquid nickel, owing to the low solubility of nitrogen in bulk nickel and the intermediate species’ preference for the metal–gas interface. The formation of hBN invariably begins by reaction of dinitrogen with nickel-solvated boron atoms at the surface, forming intermediate N–N–B species, which typically evolve into B–N–B units through a short-lived intermediate where a single nitrogen atom is coordinated by one nitrogen and two boron atoms. The resulting B–N–B units, in turn, coalesce with growing hBN nuclei and carry nitrogen between hBN nanocrystals in an Ostwald ripening process. The amount of hBN produced on the tens of nanosecond time scale depends critically on the boron concentration, while having a much weaker dependence on the N 2 pressure for the regime considered (N 2 pressures of 2.5–10 MPa, Ni–B solutions with 6–12% boron by atom fraction). The highest rate of hBN formation occurs at the lowest temperature considered (1750 K, just above the melting point of nickel), while no hBN sheets are formed at 2000 K or above. An analysis of the transition pathways for nitrogen atoms shows that the final step, incorporation of small B–N motifs into larger hBN sheets, is the rate-limiting step in the regimes considered. While raising the temperature from 1750 to 2000 K has little effect on the formation of intermediates (N–N–B, B–N–B, etc.), the lack of large hBN sheets at temperatures >1900 K is explained by decreased probability of the final step and increased probability of breakup of hBN into B–N motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Review of Computational Models for the Flow of Milled Biomass Part II: Continuum-Mechanics Models

The design of efficient material-handling systems for milled lignocellulosic biomass is challenging due to their complex particle morphologies and frictional interactions. Computational modeling, including the discrete element method (DEM) and continuum-based finite-element/volume methods, may offer scientific insight and predictive capabilities for the flow of milled biomass in hoppers and feeders. Herein, this article (Part II) presents a review of current state-of-the-art continuum models for the flow of milled biomass, whereas DEM models are reviewed in a companion article (Part I). Advances of numerical methods to solve the global governing equations are discussed first, followed by a comprehensive review of constitutive models for granular materials, including Drucker–Prager, hypoplastic, Cambridge-type, inertial-rheology, and nonlocal granular fluidity models. Specifically, we provide in-depth discussion on the suitability of those models for milled lignocellulosic biomass materials in terms of nonlinear elasticity, dependence of flow strength on pressure, density and shear rate, and compaction (dilation) associated with hardening (softening). Furthermore, our study shows that, despite the recent advances in continuum granular flow modeling, the most suitable constitutive models still need further development to account for material parametrization, multiflow regimes, and multiscale behavior before they can be reliably used to optimize the design and operation of biomass handling systems.

09 BIOMASS FUELS↗
DOE OSTI2021

Boron nitride nanotube precursor formation during high-temperature synthesis: kinetic and thermodynamic modelling

In this work, we performed integrated modelling of the chemical pathways of formation for boron nitride nanotube (BNNT) precursors during high-temperature synthesis in a B/N 2 mixture. Integrated modelling includes quantum chemistry, Quantum–classical molecular dynamics, thermodynamic modelling, and kinetic approaches. We demonstrate that BN compounds are formed via the interaction of molecular nitrogen with small boron clusters, rather than through interactions with less reactive liquid boron. (This process can also be described as N 2 molecule fixation.) Liquid boron evaporates to produce these boron clusters (B m with m ≤ 5), which are subsequently converted into B m N n chains. The production of such chains is crucial to the growth of BNNTs because these chains form the building blocks of bigger and longer BN chains and rings, which are in turn the building blocks of fullborenes and BNNTs. Additionally, kinetic modelling revealed that B 4 N 4 and B 5 N 4 species in particular play a major role in the N 2 molecule fixation process. Furthermore, the formation of these species via reactions with B 4 and B 5 clusters is not adequately described under the assumption of thermodynamic equilibrium, as is demonstrated in our kinetic modelling. Thus, the accumulation of both B 4 N 4 and B 5 N 4 depends on the background gas pressure and the gas cooling rate. Long BN chains and rings, which are precursors of the fullborene and BNNT growth, form via self-assembly of components B 4 N 4 and B 5 N 4 . Our modelling results—particularly the increased densities of B 4 N 4 and B 5 N 4 species at higher gas pressures—explain the experimentally observed effect of gas pressure on the yield of high-quality BNNTs. The catalytic role of hydrogen was also studied; it is shown that HBNH molecules can be the main precursor of BNNT synthesis in the presence of hydrogen.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Operation of AlGaN Channel HEMTs at 850 °C With ON/OFF Ratio >10 4

Here, we report 850 ° C operation of ultrawide bandgap (UWBG) Al-rich Al 0.68 Ga 0.32 N channel high electron mobility transistors (HEMTs) at atmospheric pressure in nitrogen ambient. Temperature dependent DC electrical characteristics were measured in situ up to 850 ° C, after exposure to 850 ° C for 60 minutes, and at 25 ° C after high temperature testing. At 850 ° C (time, t = 0 min), all HEMTs tested maintained an on/off ratio greater than 10 4 (maximum of 4.6 × 10 4 ). The threshold voltage demonstrated excellent stability with less than ±10% deviation. After returning to 25 ° C, the devices showed negligible degradation. In fact, the off-state gate current decreased and on/off ratio slightly increased. The robustness of these UWBG AlGaN transistors at temperatures up to 850 ° C demonstrates their viability for extreme environment applications.

AlGaN↗
DOE OSTI2022

Effect of iron redox ratio on the structures of boroaluminosilicate glasses

Iron oxide is commonly found in natural or industrial glass compositions and can exist as ferrous (Fe 2+ ) or ferric (Fe 3+ ) species, with their ratios depending on glass composition, temperature, pressure and the redox reactions during the glass forming process. The iron redox ratio plays an important role on silicate glass structures and consequently various properties. This work aims to study the effect of iron oxide, and particularly the iron redox ratio, on the structures of borosilicate and boroaluminosilicate glasses using molecular dynamics simulations with newly developed iron potential parameters that are compatible with the borosilicate potentials. The results provide detailed cation coordination states of both iron species and the effect of redox ratio on boron coordination and other structural features. Particularly, competition for charge compensating modifier cations (such as Na + ) among the fourfold-coordinated cations such as B 3+ , Al 3+ , and Fe 3+ is investigated by calculating the cation–cation pair distribution functions and coordination preferential ratios. The results show that the trivalent ferric ions, with a shorter Fe–O bond distance and better defined first coordiation shell with mainly four-fold coordination, act as a glass former whereas the divalent ferrous ions mainly play the role of glass modifier. The ferrous/ferric ratio (Fe 2+ /Fe 3+ ) was found to affect the glass chemistry and hence glass properties by regulating the amount of four-coordinated boron, the fraction of non-briding oxygen and other features. Finally, the results are compared with available experimental data to gain insights of the complex structures and charge compensation schemes of the glass system.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Toward the origins of binding energy shifts and “satellites” formation during plasma-XPS measurements

In-plasma x-ray photoelectron spectroscopy (plasma-XPS) emerges as a powerful platform for real-time, in situ chemical analysis under conditions relevant to semiconductor processing and other plasma-enabled technologies. This study investigates the origins of binding energy (BE) shifts and the formation of “satellite” peaks observed during plasma-XPS measurements across conductive, dielectric, and gas-phase systems. Using a standard laboratory-based ambient pressure XPS apparatus coupled with an alternating current (AC)-driven capacitively coupled plasma source, we demonstrate that metastable surface species, such as transient Au oxides, can be detected during plasma exposure, revealing chemical states that are hardly accessible using conventional ultrahigh vacuum (UHV) XPS. In dielectric samples (e.g., undoped diamond, sapphire), we observe pressure- and plasma-type-dependent BE shifts of more than 50 eV, attributed to x-ray-induced and plasma-mediated surface charging. These shifts are mitigated at higher pressures/plasmas or in electronegative plasmas (e.g., O 2 ), the latter due to enhanced charge compensation mechanisms involving slow negative ions. For gas-phase species, AC-plasma excitation leads to spectral broadening and the emergence of “satellite” peaks with energy separations of a few electron volts, linked to oscillating local plasma potentials in the probing volume. Furthermore, these findings highlight the complex and important interplay between plasma parameters, surface charging, and local electric fields in shaping XPS spectra. Overall, plasma-XPS emerges as a critical metrological tool for probing transient surface chemistry, with implications for semiconductor processing, material synthesis, and plasma diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unimolecular Reactions of E -Glycolaldehyde Oxide and Its Reactions with One and Two Water Molecules

The kinetics of Criegee intermediates are important for atmospheric modeling. However, the quantitative kinetics of Criegee intermediates are still very limited, especially for those with hydroxy groups. Here, we calculate rate constants for the unimolecular reaction of E-glycolaldehyde oxide [E-hydroxyethanal oxide, E-(CH 2 OH)CHOO], for its reactions with H 2 O and (H 2 O) 2 , and for the reaction of the E-(CH 2 OH)CHOO…H 2 O complex with H 2 O. For the highest level of electronic structure, we use W3X-L//CCSD(T)-F12a/cc-pVDZ-F12 for the unimolecular reaction and the reaction with water and W3X-L//DF-CCSD(T)-F12b/jun-cc-pVDZ for the reaction with 2 water molecules. For the dynamics, we use a dual-level strategy that combines conventional transition state theory with the highest level of electronic structure and multistructural canonical variational transition state theory with small-curvature tunneling with a validated density functional for the electronic structure. This dynamical treatment includes high-frequency anharmonicity, torsional anharmonicity, recrossing effects, and tunneling. We find that the unimolecular reaction of E-(CH 2 OH)CHOO depends on both temperature and pressure. The calculated results show that E-(CH 2 OH)CHOO…H 2 O + H 2 O is the dominant entrance channel, while previous investigations only considered Criegee intermediates + (H 2 O) 2 . In addition, we find that the atmospheric lifetime of E-(CH 2 OH)CHOO with respect to 2 water molecules is particularly short with a value of 1.71 × 10 –6 s at 0 km, which is about 2 orders of magnitude shorter than those usually assumed for Criegee intermediate reactions with water dimer. We also find that the OH group in E-(CH 2 OH)CHOO enhances its reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗