Search NASA⌕ Search

SEARCH · Search NASA

Results for “propagation delay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Shell Models of RMHD Turbulence and the Heating of Solar Coronal Loops

A simplified nonlinear numerical model for the development of incompressible magnetohydrodynamics in the presence of a strong magnetic field B|| and stratification, nicknamed 'Shell-Atm,' is presented. In planes orthogonal to the mean field, the nonlinear incompressible dynamics is replaced by two-dimensional shell models for the complex variables u and b, allowing one to reach large Reynolds numbers while at the same time carrying out sufficiently long integrations to obtain good statistics at moderate computational cost. The shell models of different planes are coupled by Alfve'n waves propagating along B||. The model may be applied to open or closed magnetic field configurations where the axial field dominates and the plasma pressure is low; here we apply it to the specific case of a magnetic loop of the solar corona heated by means of turbulence driven by photospheric motions, and we use statistics for its analysis. The Alfven waves interact nonlinearly and form turbulent spectra in the directions perpendicular and, through propagation, also parallel to the mean field. A heating function is obtained and shown to be intermittent; the average heating is consistent with values required for sustaining a hot corona and is proportional to the aspect ratio of the loop to the -1.5 power, and haracteristic properties of heating events are distributed as power laws. Crosscorrelations show a delay of dissipation compared with energy content.

corona↗
DOE OSTI2020

The Structural Basis of T4 Phage Lysis Control: DNA as the Signal for Lysis Inhibition

Optimal phage propagation depends on the regulation of the lysis of the infected host cell. In T4 phage infection, lysis occurs when the holin protein (T) forms lesions in the host membrane. However, the lethal function of T can be blocked by an antiholin (RI) during lysis inhibition (LIN). LIN sets if the infected cell undergoes superinfection, then the lysis is delayed until host/phage ratio becomes more favorable for the release of progeny. It has been thought that a signal derived from the superinfection is required to activate RI. Here we report structures that suggest a radically different model in which RI binds to T irrespective of superinfection, causing it to accumulate in a membrane as heterotetrameric 2RI–2T complex. Moreover, we show the complex binds non-specifically to DNA, suggesting that the gDNA from the superinfecting phage serves as the LIN signal and that stabilization of the complex by DNA binding is what defines LIN. Finally, we show that soluble domain of free RI crystallizes in a domain-swapped homotetramer, which likely works as a sink for RI molecules released from the RI–T complex to ensure efficient lysis. These results constitute the first structural basis and a new model not only for the historic LIN phenomenon but also for the temporal regulation of phage lysis in general.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1982

Electron acceleration in impulsive solar flares

Physical parameters relevant to the acceleration and propagation of energetic electrons during the impulsive phase of a solar flare are studied in hard X-ray, microwave and both type III and decimetric radio bursts associated with the December 4, 1978 solar flare. A one-to-one association between single type III bursts and hard X-ray peaks is established, along with a burst delay with respect to the peaks of 0.5 sec. The observed increase of the high frequency cutoff of the metric type III bursts during the impulsive phase is examined in terms of the decreasing altitude of the electron acceleration/injection region, increasing electron spectrum hardness, and decreasing acceleration time. A pulsating decimetric continuum was found to be present during and before the impulsive phase whose high frequency cutoff also systematically increased during the rise of the impulsive phase.

Kane, S. R.↗
NASA NTRS2010

Focusing Light Beams To Improve Atomic-Vapor Optical Buffers

Specially designed focusing of light beams has been proposed as a means of improving the performances of optical buffers based on cells containing hot atomic vapors (e.g., rubidium vapor). There is also a companion proposal to improve performance by use of incoherent optical pumping under suitable conditions. Regarding the proposal to use focusing: The utility of atomic-vapor optical buffers as optical storage and processing devices has been severely limited by nonuniform spatial distributions of intensity in optical beams, arising from absorption of the beams as they propagate in atomic-vapor cells. Such nonuniformity makes it impossible to optimize the physical conditions throughout a cell, thereby making it impossible to optimize the performance of the cell as an optical buffer. In practical terms simplified for the sake of brevity, "to optimize" as used here means to design the cell so as to maximize the group delay of an optical pulse while keeping the absorption and distortion of the pulse reasonably small. Regarding the proposal to use incoherent optical pumping: For reasons too complex to describe here, residual absorption of light is one of the main impediments to achievement of desirably long group delays in hot atomic vapors. The present proposal is directed toward suppressing residual absorption of light. The idea of improving the performance of slow-light optical buffers by use of incoherent pumping overlaps somewhat with the basic idea of Raman-based slow-light systems. However, prior studies of those systems did not quantitatively answer the question of whether the performance of an atomic vapor or other medium that exhibits electromagnetically induced transparency (EIT) with Raman gain is superior to that of a medium that exhibits EIT without Raman gain.

Strekalov, Dmitry↗
DOE OSTI2026

Prioritizing Uncertainties in Hydrogen Contribution to Risk in Post-Crash Outcomes for Rail

This report presents analysis from Sandia National Laboratories predicting contributions to risk associated with the use of hydrogen technology for rail. Event sequence diagrams are used to describe possible accident scenarios and progressions. Initiating event frequencies and branch event probabilities for each scenario are quantified with uncertainty using distributions fit to Federal Railroad Administration and U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration data on applicable accidents from 2000 to 2020. Uncertainty is propagated through the event sequence diagram to estimate the frequency and conditional probability of accident end states. The analysis identifies four scenarios with significant contributions to risk from hydrogen that are predicted to occur relatively frequently, which may inform priorities for reducing uncertainty. These scenarios are 1) overpressure events resulting from collisions with hydrogen release due to mechanical damage and delayed ignition, 2) jet fire events resulting from collisions with hydrogen release due to mechanical damage and immediate ignition, 3) jet fires resulting from fire or explosion initiating events involving the hydrogen tank and correct operation of the thermally-activated pressure relief device (TPRD) subsequent to the thermal insult, and 4) pressure burst resulting from fire or explosion initiating events involving the hydrogen tank and failure of the TPRD. Delayed and immediate hydrogen ignition probabilities are identified as being highly uncertain and potential candidates for reducing conservatism in the predicted frequencies for these two scenarios.

08 HYDROGEN↗
NASA NTRS1990

Location of a faulty module in a computing system

Considering the interplay between different phases of fault tolerance, a new problem of locating a faulty module in a computing system is formulated and solved. First, the probability of each module being faulty, or faulty probability, is calculated using the likelihood principle from the model parameters for fault detection, diagnostics, error propagation, and error detection. Then, based on the faulty probabilities and a given required diagnostic coverage, the order in which modules are to be diagnosed and the maximum time allotted to diagnose each module are determined by minimizing the average total diagnostic time. An example is presented and analyzed to answer the question of whether or not a system should delay the diagnosis upon detection of an error until more errors are detected.

Lin, Tein-Hsiang↗
NASA NTRS1986

The propagation of solar flare particles in a coronal loop

A time-dependent diffusion equation with velocity-dependent diffusion and energy-loss coefficients was solved for the case where energetic solar particles are injected into a coronal loop and then diffuse out the ends of the loop into the lower corona/chromosphere. The solution yields for the case of relativistic electrons, precipitation rates and populations which are necessary for calculating thick and thin target X-ray emission. It follows that the thick target emission is necessarily delayed with respect to the particle acceleration on injection by more than the mere travel time of the particle over the loop length. In addition the time-dependent electron population at the top of the loop is calculated. This is useful in estimating the resulting micron-wave emission. The results show relative timing differences in the different emission processes which are functions of particle species, energy and the point of injection of the particles into the loop. Equivalent quantities are calculated for non-relativistic protons.

Ryan, J. M.↗
DOE OSTI2022

Model-Based Reconstruction for Collimated Beam Ultrasound Systems

Collimated beam ultrasound systems are a novel technology for imaging inside multi-layered structures such as geothermal wells. Such systems include a transmitter and multiple receivers to capture reflected signals. Common algorithms for ultrasound reconstruction use delay-and-sum (DAS) approaches; these have low computational complexity but produce inaccurate images in the presence of complex structures and specialized geometries such as collimated beams.In this paper, we propose a multi-layer, ultrasonic, model-based iterative reconstruction algorithm designed for collimated beam systems. We introduce a physics-based forward model to accurately ac-count for the propagation of a collimated ultrasonic beam in multi-layer media and describe an efficient implementation using binary search. We model direct arrival signals, detector noise, and a spatially varying image prior, then cast the reconstruction as a maximum a posteriori estimation problem. Using simulated and experimental data we obtain significantly fewer artifacts relative to DAS while running in near real time using commodity compute resources.

Alanazi, Abdulrahman M.↗
NASA NTRS1980

Comparison of ISEE-1 and -3 interplanetary magnetic field observations

Three hourly correlation coefficients and the lag at maximum correlation are computed using one minute averages of ISEE-1 and -3 magnetometer data during the period in which ISEE-3 moved from the earth to its halo orbit around the libration point. The maximum correlation coefficients are highly variable ranging from close to zero to almost unity. The lags, while on the average approximating the expected corotation delay, have very large departures from this value. These results suggest that the normals to the planes separating fields of differing orientation often make large angles to the ecliptic plane and/or that the interplanetary magnetic field has a significant amount of bending on a scale length the order of 200 earth radii. Furthermore, there often appears to be a significant amount of propagating structure in the IMF. Thus, ISEE-3 magnetic field measurements should be used with caution if precise timing of arrival at the earth or precise directions of the field upon arrival are important.

Russell, C. T.↗
DOE OSTI2025

Correcting for Selection Biases in the Determination of the Hubble Constant from Time-Delay Cosmography

The time delay between multiple images of strongly lensed quasars has been used to infer the Hubble constant. The primary systematic uncertainty for time-delay cosmography is the mass-sheet transform (MST), which preserves the lensing observables while altering the inferred ⁠H 0 . The TDCOSMO collaboration used velocity dispersion measurements of lensed quasars and lensed galaxies to infer that mass sheets are present, which decrease the inferred H 0 by 8 per cent. Here, we test the assumption that the density profiles of galaxy–galaxy and galaxy–quasar lenses are the same. We use a composite star-plus-dark-matter mass profile for the parent deflector population and model the selection function for galaxy–galaxy and galaxy–quasar lenses. We find that a power-law density profile with an MST is a good approximation to a two-component mass profile around the Einstein radius, but we find that galaxy–galaxy lenses have systematically higher mass-sheet components than galaxy–quasar lenses. For individual systems, λ int correlates with the ratio of the half-light radius and Einstein radius of the lens. By propagating these results through the TDCOSMO hierarchical inference code, we find that H 0 is lowered by a further 3 per cent. Using a more recent measurement of velocity dispersions and our fiducial model for selection biases, we infer H 0 = 66 ± 4 (stat) ± 1 (model sys) ± 2 (measurement sys) km s -1 Mpc -1 for the TDCOSMO plus SLACS data set. The first residual systematic error is due to plausible alternative choices in modelling the selection function, and the second is an estimate of the remaining systematic error in the measurement of velocity dispersions for SLACS lenses. Accurate time-delay cosmography requires precise velocity dispersion measurements and accurate calibration of selection biases.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Three New EMP Analysis Methods [Slides]

Three analysis techniques are presented. One is a new method of doing spectrograms that gives full time resolution and optimum frequency resolution. Another is a method that uses the phase of the Fourier transform of the signal rather than the magnitude of narrow band receivers. With one FFT, one can obtain 1000’s of TOA-frequency pairs to fit to that are unaffected by any magnetic field that the signal encounter during propagation. The third method dechirps the signal in a manner that identifies the STEC and VTOA that finds when the signal has both ionospheric modes equally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Neutrino halo effect on collective neutrino oscillation in iron core-collapse supernova model of a 9.6 M ⊙ star

We extend the multi-angle computational framework and investigate the time evolution of the neutrino halo on collective neutrino oscillation in the core collapse of an iron core progenitor. We find that in the case of the 9.6 M progenitor adopted in this work, there are windows of time when the effects of neutrino halo and collective neutrino oscillation are not simultaneously large. Inside the shock, the impact of the inward-scattered halo neutrino cannot in general be neglected compared to the outward-propagating neutrino flux. However, during early epochs, collective neutrino oscillation is effectively shut down by multi-angle matter suppression. During the intermediate epoch, collective neutrino oscillation is not suppressed, but its onset radius is beyond the still relatively small explosion shock front where the halo is prominent. We also find in the case of the 9.6 M progenitor the halo neutrinos induce a delay in the onset of collective neutrino oscillations. This causes novel flavor conversions which sharpen collective neutrino oscillation spectral features. We predict that the inclusion of neutrino halo effects makes neutrino signals that are more clearly distinct from thermal emission that when halo neutrinos are omitted.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Transmission ultrasonography

Review of the results of the application of an advanced signal-processing technique, called time delay spectrometry, in obtaining soft tissue transmission images by transmission ultrasonography, both in vivo and in vitro. The presented results include amplitude ultrasound pictures and phase ultrasound pictures obtained by this technique. While amplitude ultrasonographs of tissue are closely analogous to X-ray pictures in that differential absorption is imaged, phase ultrasonographs represent an entirely new source of information based on differential time of propagation. Thus, a new source of information is made available for detailed analysis.

Heyser, R. C.↗
DOE OSTI2020

The Impacts of Horizontal Grid Spacing and Cumulus Parameterization on Subseasonal Prediction in a Global Convection-Permitting Model

Monthlong simulations targeting four Madden–Julian oscillation events made with several global model configurations are verified against observations to assess the roles of grid spacing and convective parameterization on the representation of tropical convection and midlatitude forecast skill. Specifically, the performance of a global convection-permitting model (CPM) configuration with a uniform 3-km mesh is compared to that of a global 15-km mesh with and without convective parameterization, and of a variable-resolution “channel” simulation using 3-km grid spacing only in the tropics with a scale-aware convection scheme. It is shown that global 3-km simulations produce realistic tropical precipitation statistics, except for an overall wet bias and delayed diurnal cycle. The channel simulation performs similarly, although with an unrealistically higher frequency of heavy rain. The 15-km simulations with and without cumulus schemes produce too much light and heavy tropical precipitation, respectively. Without convection parameterization, the 15-km global model produces unrealistically abundant, short-lived, and intense convection throughout the tropics. Only the global CPM configuration is able to capture eastward-propagating Madden–Julian oscillation events, and the 15-km runs favor stationary or westward-propagating convection organized at the planetary scale. The global 3-km CPM exhibits the highest extratropical forecast skill aloft and at the surface, particularly during week 3 of each hindcast. Although more cases are needed to confirm these results, this study highlights many potential benefits of using global CPMs for subseasonal forecasting. Furthermore, results show that alternatives to global convection-permitting resolution—using coarser or spatially variable resolution—feature compromises that may reduce their predictive performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Ultrasonic correlator versus signal averager as a signal to noise enhancement instrument

Ultrasonic inspection of thick and attenuating materials is hampered by the reduce amplitudes of the propagated waves to a degree that the noise is too high to enable meaningful interpretation of the data. In order to overcome the low signal to noise ratio (S/N), a correlation technique has been developed. In this method, a continuous pseudo-random pattern generated digitally is transmitted and detected by piezoelectric transducers. A correlation is performed in the instrument between the received signal and a variable delayed image of the transmitted one. The result is shown to be proportional to the impulse response of the investigated material, analogous to a signal received from a pulsed system, with an improved S/N ratio. The degree of S/N enhancement depends on the sweep rate. The correlator is described, and it is compared to the method of enhancing S/N ratio by averaging the signals. The similarities and differences between the two are highlighted and the potential advantage of the correlator system is explained.

Kishoni, Doron↗
NASA NTRS1989

Ultrasonic correlator versus signal averager as a signal to noise enhancement instrument

Ultrasonic inspection of thick and attenuating materials is hampered by the reduced amplitudes of the propagated waves to a degree that the noise is too high to enable meaningful interpretation of the data. In order to overcome the low Signal to Noise (S/N) ratio, a correlation technique has been developed. In this method, a continuous pseudo-random pattern generated digitally is transmitted and detected by piezoelectric transducers. A correlation is performed in the instrument between the received signal and a variable delayed image of the transmitted one. The result is shown to be proportional to the impulse response of the investigated material, analogous to a signal received from a pulsed system, with an improved S/N ratio. The degree of S/N enhancement depends on the sweep rate. This paper describes the correlator, and compares it to the method of enhancing S/N ratio by averaging the signals. The similarities and differences between the two are highlighted and the potential advantage of the correlator system is explained.

Kishoni, Doron↗
DOE OSTI2022

Characterization of a new ultra-high pressure shock tube facility for combustion and propulsion studies

A new shock tube facility has been designed, constructed, and characterized at the University of Central Florida. This facility is capable of withstanding pressures of up to 1000 atm, allowing for combustion diagnostics of extreme conditions, such as in rocket combustion chambers or in novel power conversion cycles. For studies with toxic gas impurities, the high initial pressures required the development of a gas delivery system to ensure the longevity of the facility and the safety of the personnel. Data acquisition and experimental propagation were implemented with remote access to ensure safety, paired with a LabVIEW- and Python-based user interface. Thus far, test pressures of 270 atm, blast pressures of 730 atm, and temperatures approaching 10 000 K have been achieved. The extreme limitations of this facility allow for emission spectroscopy to be performed during the oxidation of fuel mixtures, e.g., alkanes diluted in argon and carbon dioxide. Ignition delay times were determined and compared to simulations using chemical kinetic mechanisms. The design, experimental procedures, processes of analysis, and uncertainty determination are outlined, and typical pressure profiles are compared with a new gas dynamics solver and empirical correlations developed across multiple shock tube facilities. Preliminary reactive mixture analyses are included with further investigation of the mixtures outlined.

47 OTHER INSTRUMENTATION↗
NASA NTRS1975

Experimental test of general relativity using time-delay data from Mariner 6 and Mariner 7

Range and Doppler data from Mariner 6 and Mariner 7 have been analyzed for purposes of measuring the effect of the sun's gravity field on S-band radio transmissions to the spacecraft. The prediction of general relativity, that the round-trip time delays between the station and the spacecraft will be increased by about 200 microsec near superior conjunction, has been verified with an uncertainty of 3 per cent or less. The dominant error source on the experiment is the stochastic nongravitational forces which act on the spacecraft and which limit the accuracy of the determination of the Mariner orbits. Effects of free coronal electrons on the round-trip propagation also make the measurement difficult, but the coronal contribution to the error is only about 1 per cent. Separate analyses of data from Mariner 6 and Mariner 7 yield two values near unity for the parameter gamma* which differ by about 0.3 per cent from each other. This and other considerations suggest that the error in the experiment is perhaps less than 3 per cent.

Anderson, J. D.↗