Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Analysis of the efficiency of intermediate band solar cells based on quantum dot supercrystals

We have studied the influence of the quantum-dot (QD) width and the quantum-dot conduction band (QD-CB) offset on the efficiency of quantum-dot intermediate band solar cells (QD-IBSCs). Simulation results demonstrate that with increasing QD-CB offset and decreasing QD width, the maximum efficiency is achieved. (laser applications and other topics in quantum electronics)

36 MATERIALS SCIENCE↗

Synthesis, Characterization and Application Of PbS Quantum Dots

Lead Chalcogenides (PbS, PbSe, PbTe) quantum dots (QDs) are ideal for fundamental studies of strongly quantum confined systems with possible technological applications. Tunable electronic transitions at near--infrared wavelengths can be obtained with these QDs. Applications of lead chalcogenides encompass quite a good number of important field viz. the fields of telecommunications, medical electronics, optoelectronics etc. Very recently, it has been proposed that 'memristor'(Memory resistor) can be realized in nanoscale systems with coupled ionic and electronic transports. The hystersis characteristics of 'memristor' are observed in many nanoscale electronic devices including semiconductor quantum dot devices. This paper reports synthesis of PbS QDs by chemical route. The fabricated samples are characterized by UV-Vis, XRD, SEM, TEM, EDS, etc. Observed characteristics confirm nano formation. I-V characteristics of the sample are studied for investigating their applications as 'memristor'.

36 MATERIALS SCIENCE↗

Single-photon absorption and dynamic control of the exciton energy in a coupled quantum-dot-cavity system

We theoretically investigate the dynamic interaction of a quantum dot in a nanocavity with time-symmetric single-photon pulses. The simulations, based on a wave-function approach, reveal that almost perfect single-photon absorption occurs for quantum-dot-cavity systems operating on the edge between strong- and weak-coupling regimes. The computed maximum absorption probability is close to unity for pulses with a typical length comparable to half of the Rabi period. Furthermore, the dynamic control of the quantum-dot energy via electric fields allows the freezing of the light-matter interaction, leaving the quantum dot in its excited state. Shaping of single-photon wave packets by the electric field control is limited by the occurrence of chirping of the single-photon pulse. This understanding of the interaction of single-photon pulses with the quantum-dot-cavity system provides the basis for the development of advanced protocols for quantum-information processing in the solid state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collective modes of quantum dot ensembles in microcavities

Emission spectra of quantum dot arrays in zero-dimensional microcavities are studied theoretically. It is shown that their form is determined by the competition between collective superradiant mode formation and inhomogeneous broadening. A random sources method is used to calculate the photoluminescence spectra from an nonresonant pumped microcavity, and a standard diagram technique is used to provide a microscopic justification for the random sources method. The emission spectra of a microcavity are analyzed taking into account the spread of exciton energy due to inhomogeneous distribution of quantum dots and tunneling between them. It is demonstrated that the luminescence spectra of strongly tunnel-coupled quantum dots are sensitive to the dot positions, and the collective mode can (under certain conditions) be stabilized by random tunneling links.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In situ study of the formation kinetics of InSb quantum dots grown in an InAs(Sb) matrix

Formation of InSb quantum dots grown in an InAs matrix by molecular-beam epitaxy that does not involve forced deposition of InSb is studied. Detection of intensity oscillations in the reflection of high-energy electron diffraction patterns was used to study in situ the kinetics of the formation of InSb quantum dots and an InAsSb wetting layer. The effects of the substrate temperature, the shutter operation sequence, and the introduction of growth interruptions on the properties of the array of InSb quantum dots are examined. Introduction of a growth interruption immediately after completing the exposure of the InAs surface to the antimony flux leads to a reduction in the nominal thickness of InSb and to an enhancement in the uniformity of the quantum-dot array. It is shown that, in the case of deposition of submonolayer-thickness InSb/InAs quantum dots, the segregation layer of InAsSb plays the role of the wetting layer. The Sb segregation length and segregation ratio, as well as their temperature dependences, are determined.

36 MATERIALS SCIENCE↗

In situ study of the formation kinetics of InSb quantum dots grown in an InAs(Sb) matrix

Formation of InSb quantum dots grown in an InAs matrix by molecular-beam epitaxy that does not involve forced deposition of InSb is studied. Detection of intensity oscillations in the reflection of high-energy electron diffraction patterns was used to study in situ the kinetics of the formation of InSb quantum dots and an InAsSb wetting layer. The effects of the substrate temperature, the shutter operation sequence, and the introduction of growth interruptions on the properties of the array of InSb quantum dots are examined. Introduction of a growth interruption immediately after completing the exposure of the InAs surface to the antimony flux leads to a reduction in the nominal thickness of InSb and to an enhancement in the uniformity of the quantum-dot array. It is shown that, in the case of deposition of submonolayer-thickness InSb/InAs quantum dots, the segregation layer of InAsSb plays the role of the wetting layer. The Sb segregation length and segregation ratio, as well as their temperature dependences, are determined.

36 MATERIALS SCIENCE↗

Quantum-dot photon dynamics in a coupled-cavity waveguide: Observing band-edge quantum optics

We introduce a tight-binding approach to model the emission dynamics of a quantum-dot in realistic, photonic-crystal-slab coupled-cavity systems. We apply our approach to a quantum-dot strongly coupled at the band edge of a lossy coupled-cavity waveguide and calculate the quantum-dot dynamics as well as the photon dynamics along the waveguide. We show that the condition for strong coupling is simply parametrized in terms of the waveguide loss and find that the key signature of the strong-coupling, Rabi oscillations, could be observed via time-resolved photon detection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

All-inorganic CsPbI 3 perovskite quantum dots have received substantial research interest for photovoltaic applications because of higher efficiency compared to solar cells using other quantum dots materials and the various exciting properties that perovskites have to offer. These quantum dot devices also exhibit good mechanical stability amongst various thin-film photovoltaic technologies. We demonstrate higher mechanical endurance of quantum dot films compared to bulk thin film and highlight the importance of further research on high-performance and flexible optoelectronic devices using nanoscale grains as an advantage. Specifically, we develop a hybrid interfacial architecture consisting of CsPbI 3 quantum dot/PCBM heterojunction, enabling an energy cascade for efficient charge transfer and mechanical adhesion. The champion CsPbI3 quantum dot solar cell has an efficiency of 15.1% (stabilized power output of 14.61%), which is among the highest report to date. Building on this strategy, we further demonstrate a highest efficiency of 12.3% in flexible quantum dot photovoltaics.

14 SOLAR ENERGY↗

Microwave growth and tunable photoluminescence of nitrogen-doped graphene and carbon nitride quantum dots

Tunable photoluminescent nitrogen-doped graphene and graphitic carbon nitride (g-C 3 N 4 ) quantum dots are synthesized via a facile solid-phase microwave-assisted (SPMA) technique utilizing the pyrolysis of citric acid and urea precursors. The atomic ratio, surface functionalization, and atomic structure of as-prepared quantum dots strongly depend on the ratio of citric acid to urea. The quantum dots have a homogeneous particle size and tend to form a circle and/or ellipse shape to minimize the edge free energy. The atomic ratio of surface nitrogen to carbon (N/C) in the quantum dots can reach as high as 1.74, among the highest values reported in the literature. The SPMA technique is capable of producing high-quality quantum dots with photoluminescence (PL) emission at various wavelengths on a pilot scale. The atomic structures of the N-doped graphene and g-C 3 N 4 quantum dots are investigated using molecular dynamics simulations. Increasing the urea concentration increases the tendency of in-plane N ( i.e. , quaternary N) substitution over that of other amino functionalizations, such as pyrrolic and pyridinic N. The PL emission can be precisely tuned via a one-step SPMA method by adjusting the precursor composition. A high quantum yield of 38.7% is achieved with N-doped graphene quantum dots, indicating the substantial influence of the N- and O-rich edge groups on the enhancement of PL efficiency. A bandgap structure is introduced to describe the interstate (π*–π) transition of quantum dots. This work presents a novel approach for engineering the chemical composition and atomic structure of graphene and g-C 3 N 4 quantum dots, facilitating their research and applications in optical, electronic, and biomedical devices.

36 MATERIALS SCIENCE↗

Lateral photoconductivity of multilayer Ge/Si structures with Ge quantum dots

Spectra of lateral photoconductivity of multilayer Ge/Si structures with Ge quantum dots, fabricated by molecular-beam epitaxy are studied. The photoresponse caused by optical transitions between hole levels of quantum dots and Si electronic states was observed in the energy range of 1.1-0.3 eV at T = 78 K. It was shown that the electronic states localized in the region of Si band bending near the Ge/Si interface mainly contribute to lateral photoconductivity. The use of the quantum box model for describing hole levels of quantum dots made it possible to understand the origin of peaks observed in the photoconductivity spectra. A detailed energy-level diagram of hole levels of quantum dots and optical transitions in Ge/Si structures with strained Ge quantum dots was constructed.

36 MATERIALS SCIENCE↗

Formation of uniform high-density and small-size Ge/Si quantum dots by scanning pulsed laser annealing of pre-deposited Ge/Si film

The capability to fabricate Ge/Si quantum dots with small dot size and high dot density uniformly over a large area is crucial for many applications. In this work, we demonstrate that this can be achieved by scanning a pre-deposited Ge thin layer on Si substrate with a line-focused pulsed laser beam to induce formation of quantum dots. With suitable setting, Ge/Si quantum dots with a mean height of 2.9 nm, a mean diameter of 25 nm, and a dot density of 6×10{sup 10} cm{sup −2} could be formed over an area larger than 4 mm{sup 2}. The average size of the laser-induced quantum dots is smaller while their density is higher than that of quantum dots grown by using Stranski-Krastanov growth mode. Based on the dependence of the characteristics of quantum dots on the laser parameters, a model consisting of laser-induced strain, surface diffusion, and Ostwald ripening is proposed for the mechanism underlying the formation of the Ge/Si quantum dots. The technique demonstrated could be applicable to other materials besides Ge/Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific features of photoluminescence properties of copper-doped cadmium selenide quantum dots

The effect of doping with copper on the photoluminescence properties of cadmium selenide quantum dots 4 nm in dimension is studied. The quenching of the excitonic photoluminescence band related to the quantum dots and the appearance of an impurity photoluminescence band in the near-infrared region are observed after doping of the quantum dots with copper. It is established that, on doping of the quantum dots, the photoluminescence kinetics undergoes substantial changes. The photoluminescence kinetics of the undoped quantum dots is adequately described by a sum of exponential relaxation relations, whereas the photoluminescence kinetics experimentally observed in the region of the impurity band of the copper-doped samples follows stretched exponential decay, with the average lifetimes 0.3-0.6 {mu}s at the photon energies in the range of 1.47-1.82 eV. The experimentally observed changes in the photoluminescence properties are attributed to transformation of radiative centers in the quantum dots when doped with copper atoms.

36 MATERIALS SCIENCE↗

Charge and energy transfer in double asymmetric quantum wells with quantum dots

The luminescence and luminescence excitation spectra of CdSe/ZnSe quantum dots are studied in a set of double quantum wells with the ZnSe barrier of width 14 nm, the same amount of a deposited CdSe layer forming a deep well and shallow wells with different depths. It is found that for a certain relation between the depths of shallow and deep wells in this set, conditions are realized under which the exciton channel in the luminescence excitation spectrum of a shallow well dominates in the region of kinetic exciton energies exceeding 10 longitudinal optical phonons above the bottom of the exciton band of the ZnSe barrier. A model is developed for the transfer of electrons, holes, and excitons between the electronic states of shallow and deep quantum wells separated by wide enough barriers. It is shown that the most probable process of electronic energy transfer between the states of shallow and deep quantum wells is indirect tunneling with the simultaneous excitation of a longitudinal optical phonon in the lattice. Because the probability of this process for single charge carriers considerably exceeds the exciton tunneling probability, a system of double quantum wells can be prepared in which, in the case of weak enough excitation, the states of quantum dots in shallow quantum wells will be mainly populated by excitons, which explains experimental results obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The operation principle of the well in quantum dot stack infrared photodetector

The well in the quantum dot stack infrared photodetector (WD-QDIP) is proposed which can be operated at high temperature ∼230 K. The operation principle of this device is investigated, including the carrier transport and the enhancement in the photocurrent. The WD-QDIPs with different well numbers are fabricated to study the mechanisms. It is realized that the carrier transport from the emitter to the collector in traditional quantum dot infrared photodetectors consists of two channels deduced from current-voltage characteristics and dark current activation energy at different temperatures. At temperatures below 77 K, the current transports through the InAs quantum dot channel, whereas at temperatures higher than 77 K, the current is dominated by the GaAs leakage channel. In addition, the non-equilibrium situation at low temperatures is also observed owing to the presence of photovoltaic phenomenon. The carrier distribution inside the QDs is simulated to investigate the reasons for the increase of photocurrent. Based on the simulation and the photocurrent response, the hot carrier (electron) scattering effect by the insertion of a quantum well layer is inferred as the most probable reason that lead to the enhancement of the response and regarded as the key factor to achieve high- temperature operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

System of ideal quantum dots with Coulomb interaction

The wave functions of single-electron states localised on a system of single-level ideal quantum dots in a semiconductor matrix are constructed. The standard Kane theory, which describes the renormalisation of the effective mass of electrons in bulk III − V semiconductors, is transformed, for the first time as far as we know, for small-size quantum dots. The renormalised electron mass in a quantum dot depends on its ground state energy, which, in turn, depends on this mass. Thus, a self-consistent problem is obtained for calculating the electron binding energy. The radius of the Debye screening of the Coulomb interaction in a system of quantum dots is calculated at room temperature. The Coulomb repulsion of electrons localised on dots limits from above the possible number of filled dots. The condition is formulated for the optimal concentration of quantum dots. A classical distribution function for the probability of quantum dot filling is constructed. It is found the state, where electrons fill exactly half the maximum possible number of filled dots, exhibits the minimal energy (and therefore the most stable), the condition being fairly universal. In particular, it can be used to estimate the limiting efficiency of quantum-dot diode lasers. (quantum dots)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vertical Architecture Solution-Processed Quantum Dot Photodetectors with Amorphous Selenium Hole Transport Layer

Colloidal quantum dots (CQDs) provide wide spectral tunability and high absorption coefficients owing to quantum confinement and large oscillator strengths, which along with solution processability, allow a facile, low-cost, and room-temperature deposition technique for the fabrication of photonic devices. However, many solution-processed CQD photodetector devices demonstrate low specific-detectivity and slow temporal response. To achieve improved photodetector characteristics, limiting carrier recombination and enhancing photogenerated carrier separation are crucial. In this study, we develop and present an alternate vertical-stack photodetector wherein we use a solution-processed quantum dot photoconversion layer coupled to an amorphous selenium (a-Se) wide-bandgap charge transport layer that is capable of exhibiting single-carrier hole impact ionization and is compatible with active-matrix readout circuitry. This a-Se chalcogenide transport layer enables the fabrication of high-performance and reliable solution-processed quantum dot photodetectors, with enhanced charge extraction capabilities, high specific detectivity (D* ~ 0.5–5 × 10 12 Jones), fast 3 dB electrical bandwidth (3 dB BW ~ 22 MHz), low dark current density (J D ~ 5–10 pA/cm 2 ), low noise current (i n ~ 20–25 fW/Hz 1/2 ), and high linear dynamic range (LDR ~130–150 dB) across the measured visible electromagnetic spectrum (~405–656 nm).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparative study of donor-induced quantum dots in Si nano-channels by single-electron transport characterization and Kelvin probe force microscopy

We comparatively study donor-induced quantum dots in Si nanoscale-channel transistors for a wide range of doping concentration by analysis of single-electron tunneling transport and surface potential measured by Kelvin probe force microscopy (KPFM). By correlating KPFM observations of donor-induced potential landscapes with simulations based on Thomas-Fermi approximation, it is demonstrated that single-electron tunneling transport at lowest gate voltages (for smallest coverage of screening electrons) is governed most frequently by only one dominant quantum dot, regardless of doping concentration. Doping concentration, however, primarily affects the internal structure of the quantum dot. At low concentrations, individual donors form most of the quantum dots, i.e., “donor-atom” quantum dots. In contrast, at high concentrations above metal-insulator transition, closely placed donors instead of individual donors form more complex quantum dots, i.e., “donor-cluster” quantum dots. The potential depth of these “donor-cluster” quantum dots is significantly reduced by increasing gate voltage (increasing coverage of screening electrons), leading to the occurrence of multiple competing quantum dots.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface acoustic wave regulated single photon emission from a coupled quantum dot–nanocavity system

A coupled quantum dot–nanocavity system in the weak coupling regime of cavity-quantumelectrodynamics is dynamically tuned in and out of resonance by the coherent elastic field of a f{sub SAW} ≃ 800 MHz surface acoustic wave. When the system is brought to resonance by the sound wave, light-matter interaction is strongly increased by the Purcell effect. This leads to a precisely timed single photon emission as confirmed by the second order photon correlation function, g{sup (2)}. All relevant frequencies of our experiment are faithfully identified in the Fourier transform of g{sup (2)}, demonstrating high fidelity regulation of the stream of single photons emitted by the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗