Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

High-cycle fatigue behavior of Ti-5Al-2.5Sn ELI alloy forging at low temperatures

High-cycle fatigue properties of Ti-5Al-2.5Sn Extra Low Interstitial (ELI) alloy forging were investigated at low temperatures. The high-cycle fatigue strength at low temperatures of this alloy was relatively low compared with that at ambient temperature. The crystallographic orientation of a facet formed at a fatigue crack initiation site was determined by electron backscatter diffraction (EBSD) method in scanning electron microscope (SEM) to understand the fatigue crack initiation mechanism and discuss on the low fatigue strength at low temperature. Furthermore, in terms of the practical use of this alloy, the effect of the stress ratio (or mean stress) on the high-cycle fatigue properties was evaluated using the modified Goodman diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CTAB-Assisted Synthesis of N-Doped Fe{sub 3}C Nanowires and Their Magnetic Properties

N-doped iron carbide (N-doped Fe{sub 3}C) nanomaterials have a wide range of applications. In this study, a hexadecyltrimethylammonium bromide (CTAB)-assisted two-step process was used to prepare N-doped Fe{sub 3}C nanomaterials. The effect of CTAB addition on the phase, structure, and morphologies of the products has been investigated in detail based on the characterization results of X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectra (Raman), N{sub 2} adsorption–desorption, and elemental analysis. By tuning the amount of CTAB, N-doped Fe{sub 3}C nanowires were prepared. The magnetic hysteresis loops at room temperature of the N-doped Fe{sub 3}C nanomaterials show ferromagnetic characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and Sn crystal orientation evolution in Sn-3.5Ag lead-free solders in high temperature packaging applications

Understanding the reliability of eutectic Sn-3.5Ag lead-free solders in high temperature packaging applications is of significant interest in power electronics for the next generation electric grid. Large area (2.5mm 2.5mm) Sn-3.5Ag solder joints between silicon dies and direct bonded copper substrates were thermally cycled between 5 C and 200 C. Sn crystal orientation and microstructure evolution during thermal cycling were characterized by electron backscatter diffraction (EBSD) in scanning electron microscope (SEM). Comparisons are made between observed initial texture and microstructure and its evolution during thermal cycling. Gradual lattice rotation and grain boundary misorientation evolution suggested the continuous recrystallization mechanism. Recrystallization behavior was correlated with dislocation slip activities.

high temperature packaging↗

Structure Analysis of a Precipitate Phase in an Ni-Rich High Temperature NiTiHf Shape Memory Alloy

Thermal aging of the high temperature shape memory alloy 50.3Ni-29.7Ti-20Hf (at.%) introduces a novel precipitate phase, which plays an important role in improving shape memory properties. The precipitate phase was investigated by conventional electron diffraction, high resolution scanning transmission electron microscopy (STEM) and three dimensional atom probe tomography. An unrelaxed orthorhombic atomic structural model is proposed based on these observations. This model was subsequently relaxed by ab initio calculations. As a result of the relaxation, atom shuffle displacements occur, which in turn yields improved agreement with the STEM images. The relaxed structure, which is termed the “H-phase”, has also been verified to be thermodymanically stable at 0 K.

Atom probe tomography, Ni-Ti-Hf alloy, shape memor↗

Nano-sized Li-Fe composite oxide prepared by a self-catalytic reverse atom transfer radical polymerization approach as an anode material for lithium-ion batteries

A novel Self-catalytic Reverse Atom Transfer Radical Polymerization (RATRP) approach that can provide the radical initiator and the catalyst by the system itself is used to synthesize a nano-sized Li-Fe composite oxide powder in large scale. Its crystalline structure and morphology have been characterized by X-ray diffraction and scanning electron microscopy. The results reveal that the composite is composed of nano-sized LiFeO{sub 2} and Fe{sub 3}O{sub 4}. Its electrochemical properties are evaluated by charge/discharge measurements. The results show that the Li-Fe composite oxide is an excellent anode material for lithium-ion batteries with good cycling performance (1249 mAh g{sup -1} at 100th cycle) and outstanding rate capability (967 mAh g{sup -1} at 5 C). Such a self-catalytic RATRP approach provides a way to synthesize nano-sized iron oxide-based anode materials industrially with preferable electrochemical performance and can also be applied in other polymer-related area.

36 MATERIALS SCIENCE↗

Synthesis of nickel–zinc ferrite magnetic nanoparticle and dye degradation using photocatalytic ozonation

Graphical abstract: Display Omitted Highlights: ► Nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and characterized. ► Dye degradation by photocatalytic ozonation using NZFMN was studied. ► Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. ► Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. ► NZFMN was an effective magnetic nanocatalyst to degrade dyes. -- Abstract: In this paper, nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and its dye degradation ability using photocatalytic ozonation was investigated. The NZFMN was characterized by X-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transforms infrared (FTIR) and alternative gradient force magnetometer (AGFM). Reactive Red 198 (RR198) and Direct Green 6 (DG6) were used as dye models. UV–vis and ion chromatography (IC) analyses were employed to study dye degradation. The effects of operational parameters on decolorization such as NZFMN dosage, dye concentration, salt and pH were studied. RR198 and DG6 were completely decolorized (100%) by photocatalytic ozonation using NZFMN. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediates. Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. Results showed that the photocatalytic ozonation using NZFMN was a very effective method for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural dependence of piezoelectric, dielectric and ferroelectric properties of K{sub 0.5}Na{sub 0.5}(Nb{sub 1−2x/5}Cu{sub x})O{sub 3} lead-free ceramics with high Q{sub m}

Graphical abstract: Display Omitted Highlights: ► Double hysteresis loops were observed in K{sub 0.5}Na{sub 0.5}(Nb{sub 1−2x/5}Cu{sub x})O{sub 3}. ► Cu substitution caused structural discontinuity in KNNC. ► Dimeric defect complex (Cu{sup ‴}{sub Nb}–V{sub O}··){sup ′} with a dipole moment was formed in KNNC. -- Abstract: (K{sub 0.5}Na{sub 0.5})(Nb{sub 1−2x/5}Cu{sub x})O{sub 3} (abbreviated as KNNC, x = 0–2%) lead-free ceramics were synthetized by the solid state solution method. Pure perovskite phase with orthorhombic symmetry was observed. The evolution of the structure of KNNC was examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman scattering spectra techniques. Our results revealed that, defect dipoles (Cu{sup ‴}{sub Nb}–V{sub O}··){sup ′} were formed and provided a restoring force to reverse the switched polarization, which resulted in double P–E hysteresis loops in KNNC with Cu doping at x = 0.75% and 1%. However, non-polar defect complex (V{sub O}··–Cu{sup ‴}{sub Nb}–V{sub O}··)· caused a lattice shrinkage and the observed square shaped P–E loops in KNNC ceramics under high doping levels (x > 1%).

36 MATERIALS SCIENCE↗

Synthesis and visible light photocatalysis water splitting property of Cu-doped NaInS{sub 2} synthesized by a hydrothermal method

Graphical abstract: Display Omitted Highlights: ► Cu-doped NaInS{sub 2} powders were prepared by the solvethermal method. ► The samples were characterized by XRD, SEM, and DRS (diffuse reflection spectra). ► The effects of Cu doping ion on the photocatalytic activity were studied. ► The effects of Pt loading on the photocatalytic activity were investigated. -- Abstract: Copper-doped NaInS{sub 2} with hexagonal blocks morphology was prepared by a one-step hydrothermal method and the photocatalytic activity was investigated. The as-synthesized products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–vis spectroscopy. XRD patterns show that the Cu ions doping has no effect on the crystal structure of NaInS{sub 2}. UV–vis diffuse reflectance spectra show that the absorption wavelength of Cu-doped NaInS{sub 2} occurs red-shift which originated from Cu3d orbital forming impurity level. The photocatalytic activity was increased by Cu doping. The optimal doping amount of Cu{sup 2+} is 1.5 ml.

36 MATERIALS SCIENCE↗

Comparison of structural and electrical properties of Co{sup 2+}doped Mn-Zn soft nano ferrites prepared via coprecipitation and hydrothermal methods

Graphical abstract: - Highlights: • Coprecipitation and hydrothermal synthesis of Co{sup 2+} doped Mn-Zn ferrites. • Dielectric measurements at 3 MHz and 1 GHz frequencies. • Enhanced DC electrical resistivity for samples prepared from hydrothermal technique. • Impedance studies for the prepared samples showing major contribution due to grains. - Abstract: A series of Co doped Mn-Zn ferrites compounds with the formula Mn{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.15, 0.25, 0.35 and 0.50) were successfully synthesized by polyethylene glycol-assisted coprecipitation and hydrothermal methods. The structural characterization of the samples was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). All the samples found to have cubic spinel structure. The average crystallite size of all nanoparticles were estimated using Scherrer's formula and found to lie between 10 and 25 ± 3 nm with small size distribution of particles prepared by hydrothermal method. The FTIR spectrum showed two absorption bands of tetrahedral and octahedral metal-oxygen sites. DC electrical resistivity varied from 4.12 × 10{sup 7} to 8.32 × 10{sup 10} ohm cm with cobalt doping. The dielectric measurements were performed from 20 Hz to 3 MHz and from 1 MHz to 1 GHz frequency ranges. The value of dielectric constant (ε′) varies from 15.54 to 106.25 (1 MHz) and 6.73–16.48 (1 GHz) for all the samples at room temperature. Impedance spectroscopy was carried out from 20 Hz to 3 MHz, at room temperature to study the grains and grain boundaries effect.

36 MATERIALS SCIENCE↗

Improved gas sensing and dielectric properties of Fe doped hydroxyapatite thick films: Effect of molar concentrations

Highlights: • We report improved gas sensing and dielectric characteristics of Fe ion exchanged HAp films. • Fe doped HAp film shows maximum gas response at relatively lower temperature. • Response and gas uptake capacity of sensors is improved for appropriate amount of Fe ions in HAp matrix. • Fe-HAp films exhibit remarkable improvement in dielectric properties compared to pure HAp. • Fe doped HAp films show significant improvement in gas sensing as well as in dielectric properties. - Abstract: In the present work Fe doped hydroxyapatite (Fe-HAp) thick films has been successfully utilized to improve the gas sensing as well as its dielectric properties. Initially, HAp nano powder is synthesized by chemical precipitation process and later on Fe ions are doped in HAp by ion exchange process. Structural and morphological modifications are observed by means of X-ray diffraction and scanning electron microscopy analysis. The sensing parameters such as operating temperature, response/recovery time and gas uptake capacity are experimentally determined. The Fe-HAp (0.05 M) film shows improved CO and CO{sub 2} gas sensing capacity at lower operating temperature compared to pure HAp. Moreover, variation of dielectric constant and dielectric loss for pure and Fe-HAp thick films are studied as a function of frequency in the range of 10 Hz–1 MHz. The study reveals that Fe doped HAp thick films improve the sensing and dielectric characteristics as compared to pure HAp.

36 MATERIALS SCIENCE↗

Investigations of the optical and EPR properties of LiGa{sub 5}O{sub 8}:Cr{sup 3+} phosphor

Highlights: • Cr{sup 3+} doped LiGa{sub 5}O{sub 8} phosphor was synthesized by solution combustion synthesis. • Morphological studies show the non-uniform distribution of particles. • Photoluminescence spectra of Cr{sup 3+} doped LiGa{sub 5}O{sub 8} showed the characteristic Cr{sup 3+} peaks. • EPR spectrum showed Cr{sup 3+} ions in tetragonally distorted octahedral symmetry. - Abstract: Red emitting LiGa{sub 5}O{sub 8} doped with Cr{sup 3+} ions has been prepared by a low temperature solution combustion route. The as-prepared phosphor was studied using X-ray diffraction and scanning electron microscopic techniques. The optical spectrum exhibits two broad bands characteristic of Cr{sup 3+} ions in an octahedral symmetry. Upon excitation at 590 nm, the material displays narrow red emission line centered at 715 nm due to the {sup 2}E{sub g} → {sup 4}A{sub 2g} transition of Cr{sup 3+} ions. Electron paramagnetic resonance analyses of the sample confirm the presence of Cr{sup 3+} in the LiGa{sub 5}O{sub 8} matrix.

36 MATERIALS SCIENCE↗

Study of growth twins produced through heat treatment of fine-grained magnesium

This study investigated the microstructural features of magnesium after the fine-grained magnesium sample was heat treated at 400 °C for 2 h. Both fine-grained and heat-treated magnesium samples were observed using the electron backscatter diffraction technique in scanning electron microscopy. The results show that the grains were substantially coarsened, the local strain and the local misorientation was significantly reduced, and a large number of twins were observed in the heat-treated magnesium sample. The misorientation angle analysis determined that the twins were oriented about 86.3° away from the orientation of their corresponding matrices, and the twins were the variants of $\{1 0 \bar{1} 2\}$ tensile twins. The relative orientation analysis also identified that the fast growth directions of the twins were closely along the $<2 \bar{1} \bar{1} 0>$ or $<1 0 \bar{1} 0>$ directions in the basal plane. The twins can merge or impinge onto each other. Most boundaries between the twins have the misorientation angle of about 7.4°.

36 MATERIALS SCIENCE↗

Microstructural Evolution Of Iron Oxyfluoride/Carbon Nanocomposites Upon Electrochemical Cycling

High electrochemical performance iron oxyfluoride conversion electrode undergoes complex electrochemical reaction mechanisms upon cycling. In this work, a combination of selected area electron diffraction (SAED) and scanning transmission electron microscopy/electron energy loss spectroscopy (STEM/EELS) analysis techniques have been used to understand the conversion-reconversion mechanisms of FeO 0.7 F 1.3 /C upon cycling. Considerable changes have been observed with cycling. For the fully delithiated electrodes, the nanometer scale intermixing of amorphous rutile and nanocrystalline rocksalt phases is stable up to 20 cycles; however, upon further cycling the amount of amorphous rutile phase decreased and amount of rocksalt phase increased gradually, implying incomplete reconversion reactions with increasing cycle number. In addition, a progressive growth of solid electrolyte interphase (SEI) layer was observed with cycling, which is mainly composed of LiF. Interestingly, Fe 2+ and Fe nanoparticles were found trapped in the SEI layer with increasing cycle number. Upon cycling, the combined progressive increase in Fe 2+ content and insulating LiF (from SEI and conversion product) give rise to the observed capacity loss.

25 ENERGY STORAGE↗

Enhancement in the transport critical current density J{sub c} in YBa{sub 2}Cu{sub 3}O{sub 7−δ} added with an insulating nano crystalline YBa{sub 2}HfO{sub 5.5} perovskite

When a magnetic field is applied to type II superconductors, such as YBa{sub 2}Cu{sub 3}0{sub 7−δ} (YBCO), the flux quanta penetrate the material as a regular array of vortices. However when transport currents are applied, they act to move these vortices, thus lowers the critical current density (J{sub c}) as well as destroying superconductivity. The development of microstructures made of YBCO materials has enabled engineers to increase the critical current density, within Type II materials by introducing flux pinning centres into the material. The microstructure and flux pinning properties of YBa{sub 2}Cu{sub 3}O{sub 7−δ} system with varying levels (0-5 wt. %) of a nano perovskite ceramic insulator; YBa{sub 2}HfO{sub 5.5} addition was studied in detail. Orthorhombic YBa{sub 2}Cu{sub 3}O{sub 7−δ} powder was prepared through conventional solid state route and a modified combustion method was used for synthesizing nanocrystalline YBa{sub 2}HfO{sub 5.5}. The structure and microstructure of the samples examined by X-ray diffraction and scanning electron microscopy showed that YBa{sub 2}HfO{sub 5.5} and YBCO remained unreacted even at higher processing temperature without deteriorating the superconducting properties. The scanning electron microscope image shows that YBa{sub 2}HfO{sub 5.5} forms an electrical-network between grains. These observations suggest that the YBa{sub 2}HfO{sub 5.5} addition to the Y-123-compounds improve the electrical connection between superconducting grains and substantial improvements in the relative electrical transport properties of the composites. The variation of sintering temperature, density, critical transition temperature (T{sub c}) and magnetic field dependence of critical current density (J{sub c}) of YBa{sub 2}Cu{sub 3}O{sub 7−δ} having different proportions of YBa{sub 2}HfO{sub 5.5} in the matrix were also studied in detail. It is found that the addition of these elements considerably enhances the flux pinning strength of the system, and there is also an increase of critical temperature (T{sub c}) and critical current density (J{sub c}) up to an optimum value of 8.76 × 10{sup 4} A/cm{sup 2} for a concentration of 2 wt % addition of nano YBa{sub 2}HfO{sub 5.5}. The enhancement of the critical current density in the YBa{sub 2}Cu{sub 3}O{sub 7−δ} - YBa{sub 2}HfO{sub 5.5} samples is attributed to the sustained formation of the insulating and non-reacting YBa{sub 2}HfO{sub 5.5} phase acting as pinning center. The addition of YBa{sub 2}HfO{sub 5.5} in YBa{sub 2}Cu{sub 3}O{sub 7−δ} bulk superconductor also enhances the pinning force density from 3 ×10{sup 6} N/m{sup 3} to 69.6 × 10{sup 6}N/m{sup 3} at 77 K.

36 MATERIALS SCIENCE↗

Preparation, structural and optical characterization of ZnO, ZnO: Al nanopowder

In this paper, ZnO and ZnO:Al nanopowders have been synthesized by low cost hydrothermal method. Zinc nitrate, hexamethylenetetramine (HMT) and aluminium nitrate are used as precursors for ZnO and AZO with different molar ratios. The structural and optical characterization of doped and un-doped ZnO powders have been investigated by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDAX), photoluminescence (PL) and ultra violet visible (UV-Vis) absorption studies. The SEM results show that the hydrothermal synthesis can be used to obtain nanoparticles with different morphology. It is observed that the grain size of the AZO nanoparticles increased with increasing of Al concentration. The PL measurement of AZO shows that broad range of green emission around 550nm with high intensity. The green emission resulted mainly because of intrinsic defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe{sub 3}O{sub 4}/Zeolite nanocomposites synthesized by microwave assisted coprecipitation and its performance in reducing viscosity of heavy oil

Fe{sub 3}O{sub 4}/Zeolite nanocomposites have been synthesized via microwave assisted coprecipitation method and show to be efficient in reducing viscosity of heavy oil compared to other Fe{sub 3}O{sub 4}/Zeolite nanocomposites prepared by conventional method. The following precursors such as FeCl{sub 3}⋅6H{sub 2}O, FeSO{sub 4}⋅7H{sub 2}O, NH{sub 4}OH, and natural zeolite of heulandite type were used in the sample preparation. In this study, the effect of Fe{sub 3}O{sub 4} composition in the composite and microwave time heating were investigated. Fe{sub 3}O{sub 4}/Zeolite nanocomposites were then characterized to study the influence on crystal structures, morphology and physicochemical properties. The characterization techniques include X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen physisorption. The results show that by increasing the microwave heating time, the degree of nanocomposite intergrowth can be enhanced. The nanocomposite was tested in catalytic aquathermolysis of heavy oil at 200°C for 6 h and the Fe{sub 3}O{sub 4}/zeolite of 1 to 4 ratios performed the highest viscosity reduction of heavy oil reaching 92%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical synthesis of highly crystalline copper nanowires

Copper nanowires were fabricated within the pores of anodic alumina template (AAT) by template synthesis method at pH = 2.9. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to investigate the structure, morphology and composition of fabricated nanowires. These characterizations revealed that the deposited copper nanowires were highly crystalline in nature, dense and uniform. The crystalline copper nanowires are promising in application of future nanoelectronic devices and circuits.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of magnetic field treatment on dielectric properties of CCTO@Ni/PVDF composite with low concentration of ceramic fillers

Using melt mixing, we produced a ceramic/polymer composite with a matrix of polyvinylidene fluoride (PVDF) and a filler of 5 vol.% Ni-deposited CaCu{sub 3}Ti{sub 4}O{sub 12} core-shell ceramic particles (CCTO@Ni), and studied its prominent dielectric characteristics for the first. Its phase composition and morphology were analyzed by X-ray diffraction and scanning electron microscopy, respectively. After treating the composite films with various durations of a magnetic field treatment, we compared their dielectric properties. We found that the CCTO@Ni ceramic had a typical urchin-like core-shell structure, and that different durations of the magnetic field treatment produced different distributions of ceramic particles in the PVDF matrix. The dielectric permittivity of the untreated CCTO@Ni/PVDF composite was 20% higher than that of neat PVDF, and it had a low loss tangent. However, only the composite treated for 30 min in the magnetic field had an ultra-high dielectric permittivity of 1.41 × 10{sup 4} at 10 Hz, three orders of magnitude higher than the untreated composite, which declined dramatically with increasing frequency, accompanied by an insulating-conducting phase transition and an increase in loss tangent. Our results demonstrate that changes in the dielectric properties of PVDF composites with magnetic field treatment are closely related to the percolation effect and interfacial polarization.

36 MATERIALS SCIENCE↗