Search NASA⌕ Search

SEARCH · Search NASA

Results for “shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

A HaloSat Analysis of the Cygnus Superbubble

The Cygnus Superbubble(CSB)is a region of soft X-ray emission approximately 13 degrees wide in the direction of the local spiral arm. Such a large region might be the result of strong stellar winds and supernovae from nearby stellar nurseries, or it could be the result of a single event—a hypernova. HaloSat observed four nonoverlapping10 degree diameter fields in the CSB region over the 0.4-7 keV band. The CSB absorption and temperature was found to be consistent over all four fields, with a weighted average of 6.1×1021cm−2and 0.190 keV, respectively. These observations suggest that the CSB is a cohesive object with a singular origin. The total thermal energy for the CSB is estimated at 4×1052erg, based upon a shell-like physical model of the CSB. Absorption and distance estimates to Cyg OB associations are examined. The CSB absorption is found to be most consistent with the absorption seen in Cyg OB1, implying that the CSB lies at a similar distance of 1.1–1.4 kpc.\

Jesse Bluem↗
NASA NTRS1987

An evaluation of active noise control in a cylindrical shell

The physical mechanisms governing the use of active noise control in an extended volume of a cylindrical shell are discussed. Measured data was compared with computer results from a previously derived analytical model based on an infinite shell theory. For both the analytical model and experiment, the radiation of the external monopoles is coupled to the internal acoustic field through the radial displacement of the thin, elastic cylindrical shell. An active noise control system was implemented in the cylinder using a fixed array of discrete monopole sources, all of which lie in the plane of the exterior noise sources. Good agreement between measurement and prediction was obtained for both internal pressure response and overall noise reduction. Attenuations in the source plane greater than 15 dB were recorded along with a uniformly quieted noise environment over the entire length of the experimental model. Results indicate that for extended axial forcing distributions or very low shell damping, axial arrays of control sources may be required. Finally, the Nyquist criteria for the number of azimuthal control sources is shown to provide for effective control over the full cylinder cross section.

Silcox, R. J.↗
NASA NTRS1989

An evaluation of active noise control in a cylindrical shell

The physical mechanisms governing the use of active noise control in an extended volume of a cylindrical shell are discussed. Measured data was compared with computer results from a previously derived analytical model based on an infinite shell theory. For both the analytical model and experiment, the radiation of the external monopoles is coupled to the internal acoustic field through the radial displacement of the thin, elastic cylindrical shell. An active noise control system was implemented in the cylinder using a fixed array of discrete monopole sources, all of which lie in the plane of the exterior noise sources. Good agreement between measurement and prediction was obtained for both internal pressure response and overall noise reduction. Attenuations in the source plane greater than 15 dB were recorded along with a uniformly quieted noise environment over the entire length of the experimental model. Results indicate that for extended axial forcing distributions or very low shell damping, axial arrays of control sources may be required. Finally, the Nyquist criteria for the number of azimuthal control sources is shown to provide for effective control over the full cylinder cross section.

Silcox, R. J.↗
NASA NTRS1993

Origin of water masers in W49N

It is proposed that H2O masers in star-forming regions occur early in the expansion of thin shells swept up by high-velocity winds from young massive stars. In W49N, confinement of the shell by a density distribution with an axial cavity can explain both the velocity field and the shape of the mass distribution. A modified version of the thin-shell code of Mac Low and McCray (1988), including radiation cooling, is used to model dynamically the expanding shell.

Mac Low, Mordecai-Mark↗
NASA NTRS1993

Circumstellar shells resolved in IRAS survey data. II - Analysis

IRAS survey data for 512 red giant stars and young planetary nebulae were processed using a computer program which fitted the data to an idealized model of a circumstellar shell. Seventy-six of these stars were found to have circumstellar shells resolved in the 60-micron survey data. Forty pct of the 76 stars are carbon stars. Thirteen are Mira variables. The evolution of these shells, involving the interaction of the expelled material with the ISM, is modeled, and the results suggest that the period during which Mira variables lose mass lasts for approximately 10 exp 5 yr. Carbon stars are found to shed mass for about 2 x 10 exp 5 yr. The expansion velocity of the outer shell for the largest shells will normally be lower by a factor of 3-5 than the expansion velocity obtained from CO observations.

Young, K.↗
NASA NTRSDate not supplied

Multiscale Simulation of Deployable Composite Structures

In this paper, a multiscale simulation method for analyzing deployable composite structures is presented. Effective shell properties of the composites are obtained based on Mechanics of Structure Genome (MSG) homogenization, and then implemented into a user-subroutine UGENS for structural simulation with shell elements in Abaqus. The column bending test(CBT) of a flat thin flexure and lenticular composite boom in a simplified deployer structure are studied for demonstration. A viscoelastic material model with direct integration is adopted in this paper. The CBT simulation shows good agreement with experiments during relaxation, while errors are observed when comparing residual deformation. It is shown that this CBT model can be calibrated to CBT test results. For the lenticular boom analysis, the complete process of flattening, coiling, stowage, deployment and recovery is simulated with the viscoelastic shell model.

Finite element analysis↗
DOE OSTI2025

Detailed simulations of the first deuterium-tritium-filled double shell implosions on the National Ignition Facility

The first indirectly driven, liquid DT-filled double shell inertial confinement fusion (ICF) implosions have recently been successfully performed on the National Ignition Facility (NIF). Double shells are a class of alternative designs that use a low-Z outer shell to compress a foam cushion that accelerates a high-Z inner shell to efficiently compress a liquid DT core. Double shells are challenging to fabricate, field, and model. Important engineering features enabling double shell fabrication include a fill-tube penetrating all shells and a carefully designed and very narrow (few μm) step-joint in the ablator. Due to the higher density materials involved, high Atwood number instabilities are also important at many material interfaces. In this paper, numerical simulations of double shell implosions using the Los Alamos National Laboratory multi-physics radiation-hydrodynamics code xRAGE will be discussed. An extensive effort has been under way for several years to develop the code capabilities for ICF simulations in a common modeling framework to allow ease of simulation setup and standardization of the computational methodology. This paper will present a wide range of simulation results capturing, quantifying, and comparing the impact of all these degradation mechanisms on implosion performance. Brief comparisons with recent experimental results and suggestions for future improvements will also be discussed. Our results suggest that capsule surface roughness and the step-joint gap have the largest impact on implosion performance. Initial experimental data may suggest that the sensitivity to the step-joint gap could provide the dominant explanation for DT-filled double shell experiments that have been fielded on NIF thus far.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

Stiffness Properties for Dynamic Modeling of Composite Graphite-Epoxy Cylindrical Orthotropic Shells

Traditional composite lamination theory was used to predict composite graphite-epoxy laminate stiffnesses for comparison to quasi-experimental stiffnesses developed from cylindrical bottle pressure testing. Stiffness sensitivities were examined for variations in constituent materials and geometric properties. The material component interactions examined were the fiber longitudinal and transverse Young's modulus, the fiber shear modulus and primary Poisson's ratio, the resin Young's modulus, shear modulus, and Poisson's ratio. The geometric variation of the helical winding angle was also examined. Two computer programs were written to generate the data used to demonstrate the stiffness variations.

Tolbert, R. N.↗
NASA NTRS1992

Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener

This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener.

Wang, J. T.↗
NASA NTRS1987

Vibrations and structureborne noise in space station

Analytical models were developed to predict vibrations and structureborne noise generation of cylindrical and rectangular acoustic enclosures. These models are then used to determine structural vibration levels and interior noise to random point input forces. The guidelines developed could provide preliminary information on acoustical and vibrational environments in space station habitability modules under orbital operations. The structural models include single wall monocoque shell, double wall shell, stiffened orthotropic shell, descretely stiffened flat panels, and a coupled system composed of a cantilever beam structure and a stiffened sidewall. Aluminum and fiber reinforced composite materials are considered for single and double wall shells. The end caps of the cylindrical enclosures are modeled either as single or double wall circular plates. Sound generation in the interior space is calculated by coupling the structural vibrations to the acoustic field in the enclosure. Modal methods and transfer matrix techniques are used to obtain structural vibrations. Parametric studies are performed to determine the sensitivity of interior noise environment to changes in input, geometric and structural conditions.

Vaicaitis, R.↗
NASA NTRS2003

Self-Consistent Model of Magnetospheric Ring Current and Electromagnetic Ion Cyclotron Waves: The 2-7 May 1998 Storm

A complete description of a self-consistent model of magnetospheric ring current interacting with electromagnetic ion cyclotron waves is presented. The model is based on the system of two kinetic equations; one equation describes the ring current ion dynamics, and another equation describes the wave evolution. The effects on ring current ions interacting with electromagnetic ion cyclotron waves and back on waves are considered self-consistently by solving both equations on a global magnetospheric scale under nonsteady state conditions. The developed model is employed to simulate the entire 2-7 May 1998 storm period. First, the trapped number fluxes of the ring current protons are calculated and presented along with comparison with the data measured by the three- dimensional hot plasma instrument Polar/HYDRA. Incorporating in the model the wave-particle interaction leads to much better agreement between the experimental data and the model results. Second, examining of the wave (MLT, L shell) distributions produced by the model during the storm progress reveals an essential intensification of the wave emission about 2 days after the main phase of the storm. This result is well consistent with the earlier ground-based observations. Finally, the theoretical shapes and the occurrence rates of the wave power spectral densities are studied. It is found that about 2 days after the storm s main phase on 4 May, mainly non-Gaussian shapes of power spectral densities are produced.

Khazanov, G. V.↗
NASA NTRS1988

Non-isothermal buckling behavior of viscoplastic shell structures

Described are the mathematical model and solution methodologies for analyzing the structural response of thin, metallic elasto-viscoplastic shell structures under large thermomechanical loads and their non-isothermal buckling behavior. Among the system responses associated with these loads and conditions are snap-through, buckling, thermal buckling, and creep buckling. This geometric and material nonlinearities (of high order) can be anticipated and are considered in the model and the numerical treatment.

Riff, Richard↗
NASA NTRS1982

Modes of mantle convection and the removal of heat from the earth's interior

Thermal histories for two-layer and whole-mantle convection models are calculated and presented, based on a parameterization of convective heat transport. The model is composed of two concentric spherical shells surrounding a spherical core. The models were constrained to yield the observed present-day surface heat flow and mantle viscosity, in order to determine parameters. These parameters were varied to determine their effects on the results. Studies show that whole-mantle convection removes three times more primordial heat from the earth interior and six times more from the core than does two-layer convection (in 4.5 billion years). Mantle volumetric heat generation rates for both models are comparable to that of a potassium-depleted chondrite, and thus surface heat-flux balance does not require potassium in the core. Whole and two-layer mantle convection differences are primarily due to lower mantle thermal insulation and the lower heat removal efficiency of the upper mantle as compared with that of the whole mantle.

Spohn, T.↗
NASA NTRS1993

Global/local interlaminar stress analysis of a grid-stiffened composite panel

A global/local procedure for the computation of the interlaminar stress components at the skin wrap, skin core, and wrap core interfaces for an advanced concept stiffened panel, is described. The procedure consists of a global model of two dimensional shell elements that is used to design a grid stiffened panel with blade type stiffeners, a local model of three dimensional solid elements that is used to compute interlaminar stress components, and a scheme devised to assign displacement boundary conditions for a local model that are based on displacement and rotation data of a few nodes of the global model. A global panel was designed according to strength, stiffness, and stability criteria associated with the design of traditional aircraft wing panels. Interlaminar normal and shearing stress components, computed via the local model, were found to be well below typical tensile normal and shearing strengths of a graphite epoxy material.

Wiggenraad, J. F. M.↗