Search NASA⌕ Search

SEARCH · Search NASA

Results for “silicate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Examination of gamma-irradiated calcium silicate hydrates. Part I: Chemical-structural properties

The chemical-structural properties of synthetic calcium silicate hydrate (C-S-H) with C/S (Ca/Si) ratios of 0.75, 1 and 1.33 were studied after gamma irradiation-absorbed doses ranging from 0.145 to 0.784 MGy and compared with those of control specimens. The results showed that the total water content given by thermogravimetric analysis and the dimension of the basal spacing given by x-ray diffraction were comparable for control and irradiated samples, which indicate that the interlayer water content did not change. The morphology, C/S ratios, and silicate mean chain length were also found to be unaltered by the absorbed gamma doses.

36 MATERIALS SCIENCE↗

Vibrational spectroscopy analysis of silica and silicate glass networks

Vibrational spectroscopy has been widely used to investigate various structural aspects of the glass network, and there are a plethora of papers reporting subtle but consistent changes in infrared and Raman spectral features of glass upon alterations of glass compositions, thermal histories, mechanical stresses, or surface treatments. However, interpretations of such spectral features are still obscured due to the lack of well-established physical principles accurately describing vibrational modes of the non-crystalline glass network. Due to the non-equilibrium nature of the glass network, three-dimensionally connected without any long-range orders, vibrational spectral features of glass cannot be interpreted using the analogy with those of isolated molecular moieties or crystalline counterparts. Here, this feature article explains why such comparisons are outdated and describes the recent advances made from theoretical calculations of vibrational spectral features of amorphous networks or comparisons of computational results with experimental data. For the interpretation of vibrational spectral features of silica and silicate glasses, the following empirical relationships are suggested: (i) the intensity-weighted peak position of the Si-O-Si stretch mode negatively correlates with the weighted average of the Si-O bond length distribution, and (ii) the broad band of the Si-O-Si bending mode negatively correlates with the Si-O-Si bond angle distribution. Selected examples of vibrational spectroscopic imaging of surface defects are discussed to deliberate the implication of these findings in the structure-property relationship of silica and silicate glass materials. Unanswered questions and continuing research challenges are identified.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of X-Ray Radiation on the Optical Properties of Photorefractive Bismuth-Silicate Crystals

The results of investigations of the optical-absorption spectra of bismuth-silicate (Bi{sub 12}SiO{sub 20}) single crystals are presented. The band-gap width and the characteristic Urbach energy are determined. The effect of preliminary X-ray irradiation on the behavior of the experimental spectral dependences and the values of the characteristic parameters induced by the bismuth-silicate defect structure is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicate Based Glass Formulations for Immobilization of U.S. Defense Wastes Using Cold Crucible Induction Melters

The cold crucible induction melter (CCIM) is an alternative technology to the currently deployed liquid-fed, ceramic-lined, Joule-heated melter for immobilizing of U.S. tank waste generated from defense related reprocessing. In order to accurately evaluate the potential benefits of deploying a CCIM, glasses must be developed specifically for that melting technology. Related glass formulation efforts have been conducted since the 1990s including a recent study that is first documented in this report. The purpose of this report is to summarize the silicate base glass formulation efforts for CCIM testing of U.S. tank wastes. Summaries of phosphate based glass formulation and phosphate and silicate based CCIM demonstration tests are reported separately (Day and Ray 2013 and Marra 2013, respectively). Combined these three reports summarize the current state of knowledge related to waste form development and process testing of CCIM technology for U.S. tank wastes.

Cold crucible induction melter↗

Examination of Gamma-irradiated Calcium Silicate Hydrates. Part II: Mechanical Properties

Mechanical properties of calcium silicate hydrates (C-S-H) with C/S ratios of 0.75, 1, and 1.33 were examined with nanoindentation after gamma-adsorbed doses of 0.145, 0.280, 0.500, and 0.784 MGy, and were compared with control samples. Young' s modulus and stress relaxation tests showed no apparent trend with irradiation dose. Qualitatively, most of the irradiated samples were found to relax more than their respective controls, but not always in a statistically significant manner. Most of the Young' s modulus irradiated–control pairs showed marginally higher stiffness in the irradiated samples, but overall trends with irradiation dose were not obvious. Creep compliance was obtained for the samples irradiated at the highest dose and their respective controls. Two of the three irradiated samples exhibited less creep than their respective controls, but only one of which was statistically significant. The lack of clear changes in mechanical properties for these samples correlates with separate chemical analyses that showed no loss of interlayer water by exposure to irradiation or changes in the mean silicate chain length. Further research evaluating higher doses (25 and 200 MGy) representative of those received by concrete structures in nuclear power plants at prolonged operation is being carried out to complement the present study.

36 MATERIALS SCIENCE↗

Standards for electron probe microanalysis of silicates prepared by convenient method

Standard compositions suitable for electron probe microanalysis of various silicates are prepared by coprecipitation of specified salts with colloidal silica to form a gel which is decomposed into a powdered oxide mixture and compressed into thin pellets. These pellets of predetermined standard are compared with a silicate sample to determine its composition.

Walter, L. S.↗

The viscosity of magmatic silicate liquids: A model for calculation

A simple model has been designed to allow reasonably accurate calculations of viscosity as a function of temperature and composition. The problem of predicting viscosities of anhydrous silicate liquids has been investigated since such viscosity numbers are applicable to many extrusive melts and to nearly dry magmatic liquids in general. The fluidizing action of water dissolved in silicate melts is well recognized and it is now possible to predict the effect of water content on viscosity in a semiquantitative way. Water was not incorporated directly into the model. Viscosities of anhydrous compositions were calculated, and, where necessary, the effect of added water and estimated. The model can be easily modified to incorporate the effect of water whenever sufficient additional data are accumulated.

Bottinga, Y.↗

Low keV electron probe analysis of silicate minerals for Mg, Al, and Si using pure-element standards

Accurate electron probe values for Mg, Al, and Si in silicate minerals may be obtained with pure-element standards. Analysis must be done at low (6 kV) accelerating potential and for best results, the average atomic number of the sample should be within about plus or minus 1 of the atomic number of the pure-element standard. This last requirement is automatically fulfilled for most common silicate minerals, as their average atomic numbers usually fall within the 11 to 15 range. Examples studied include a wet-chemically analyzed cordierite containing 17.71 weight percent Al, for which a value of 17.6 plus or minus 0.3 percent was obtained with the electron probe, and a hornblende containing 19.15 percent Si, which gave 19.0 plus or minus 0.3 percent using the probe method.

Cunningham, G. G.↗

Xe and Kr analyses of silicate inclusions from iron meteorites.

Measurements have been conducted of the amounts and isotopic composition of Xe and Kr in silicate inclusions of several iron meteorites. It is shown that the Xe and Kr contents are comparable to chondritic values. The isotopic compositions show trapped gas of both chondritic and atmospheric composition. Large spallation effects occur in some of the meteorites; the spallation spectra in some instances differ from those reported for stone meteorites. In several meteorites, very large neutron capture effects on Br and I occur. All samples have pronounced Xe129 excesses which apparently indicate differences in the formation times from chondrites of less than about 100 million years; however, the presence of trapped Xe132 in silicates which were enclosed in molten Fe-Ni and cooled slowly proves that they were not entirely outgassed, so that some of the Xe129 excess may also be trapped.

Bogard, D. D.↗

Gallium and germanium in the metal and silicates of L- and LL-chondrites.

Concentrations of Ga and Ge in the metal of 31 L-, 8 LL- and 2 H-chondrites, and in the silicates of 12 L- and LL-chondrites have been determined by spectrophotometric methods. The ranges of Ga contents in the metal of L- and LL-chondrites are 1.1 to 36.9 ppm and 1.0 to 34.1 ppm, respectively. The Ge content in the metal is positively correlated with Ga and ranges from 89.1 to 160 ppm and from 126 to 308 ppm for L- and LL-chondrites, respectively. The Ga content in the silicates of L-chondrites varies from 4.0 to 8.9 ppm. The Ga and Ge contents in the metal are clearly lower in unequilibrated than in equilibrated L- and LL-group chondrites. Unequilibrated and equilibrated chondrites are well separated in the plots of Ga vs Ge in the metal, and the L- and LL-groups are also well resolved. The Ga and Ge in the metal are well correlated with petrologic grade. This suggests that Ga and Ge variations in the metal are related to thermal metamorphism. There is evidence of an enrichment of Ga in the metal due to shock reheating.

Chou, C.-L.↗

A sample holding technique for study of crystal growth in silicate melts

A thin platinum wire loop is an effective way to hold silicate melts during experimentation in a gas-mixing furnace. This method results in a minimum of physical and chemical interaction between the sample and container but maximum interaction between sample and gas mixture. However, volatilization of sodium occurs while the silicate is molten. By minimizing the chance of heterogeneous nucleation, the method is ideal for experimental investigation of the origin of rock textures.

Donaldson, C. H.↗

Mafic silicates in the Orgueil carbonaceous meteorite

Iron-bearing olivines and pyroxenes occurring in Orgueil may represent a separate population distinct from the magnesian varieties previously reported. Compositions of these iron-bearing silicates are inconsistent with an origin by direct equilibrium condensation in the nebula. Such an origin is more plausible for the magnesian silicates, but lacks conclusive evidence. An extra-solar system origin for either mafic population is possible, though similarly lacking in evidence. About 15% of the olivines, randomly distributed with respect to iron content, retain particle track evidence of a precompaction irradiation.

Kerridge, J. F.↗

Electrical conductivity measurements on silicate melts using the loop technique

A new method is described for measurement of the electrical conductivity of silicate melts under controlled oxygen partial pressure at temperatures to 1550 C. The melt samples are suspended as droplets on platinum-rhodium loops, minimizing iron loss from the melt due to alloying with platinum, and providing maximum surface exposure of the melt to the oxygen-buffering gas atmosphere. The latter provides extremely rapid equilibration of the melt with the imposed oxygen partial pressure. The loop technique involves a minimum of setup time and cost, provides reproducible results to within + or - 5% and is well suited to electrical conductivity studies on silicate melts containing redox cations.

Waff, H. S.↗

Infrared observations of ices and silicates in molecular clouds

Spectrophotometric observations from 2 to 4 microns and from 8 to 13 microns of several infrared sources associated with molecular clouds are reported. Narrow absorption features at 3.08 microns, attributed to interstellar ices, appear in all sources with a molecular cloud in the intervening line of sight. All sources showing ice absorptions also show broad absorption features, attributed to cold silicates, from 8 to 13 microns. The observed ice absorption profiles are all quite similar; however, they do not fit in detail Mie theory predictions of extinction for pure H2O or NH3 ices. The ratio of ice-to-silicate optical depths is found to vary, with most sources showing a ratio in the range 0.1-0.4. The ratio of visual extinction to ice absorption is found to increase rapidly from inside to outside the molecular cloud in NGC 2024.

Merrill, K. M.↗

Solubility of K in Fe-S liquid, silicate-K/Fe-S/liq equilibria, and their planetary implications

Potassium has been found to have extremely limited absolute solubility in Fe-S liquid in the pressure-temperature range of 18 to 40 kbars, 1050 to 1150 C, and fO2 within the field of metallic iron. It also partitioned into a certain silicate phase highly in preference to Fe-S liquid at 30 kbar and 1100 C. The dependence of the partitioning of K between solid silicate and Fe-S liquid on fO2 and compositions of mineral solid solutions have been analyzed. These experimental data, along with those of others, limit the amount of K that could fractionate in Fe-S liquid layers or a core in the early history of the moon and, thus, act as localized heat sources in its thermal history models; the data also seem to argue against a chondritic abundance of potassium for earth. The question of fractionation of enough K-40 in an Fe-S liquid outer core of earth to provide the necesary thermal energy for the geomagnetic dynamo remains unresolved.

Gangully, J.↗

Tysnes Island - An unusual clast composed of solidified, immiscible, Fe-FeS and silicate melts

An inclusion found in the Tysnes Island gas-rich H4 chondrite is described. The clast consists of two distinct portions, separated by a smooth boundary; the portions are a tear-drop shaped Fe-FeS eutecticlike intergrowth (0.5 cm greatest dimension) and a silicate consisting primarily of olivine in glass. Nickel enrichment is found in the metal at the metal-sulfide boundaries and in nodules within the metal. It is thought that the portions separated from one another as immiscible liquids and that the modal composition of each portion agrees with the compositions predicted for a total melt of an H-group chondrite. The inclusion is discussed in terms of the process of metal-silicate fractionation suggested by Fodor and Keil (1976).

Wilkening, L. L.↗

Compositional variation in late-stage differentiates in mare lavas, as indicated by silicate melt inclusions

Questions regarding an interpretation of data from silicate melt inclusions are considered, taking into account the fragmental nature of the record, the possible effects of cooling rate on late-stage melt composition, and the crystallization of the trapped melt. New data related to 484 new analyses are provided in a separate table. Textural and mineralogical features and bulk chemical composition for an overall characterization of late-stage differentiates are discussed. A description is presented of a grouping and recognition of rock types on the basis of late-stage inclusion analyses. Attention is given to the bimodality of potassium values and the delineation of differentiation trends. It is found that many of the problems in interpretation and much of the scatter found in the composition of silicate melt inclusions in lunar samples can be attributed to the incomplete nature of the record and to crystallization after trapping.

Roedder, E.↗

Some possible effects of solid-state deformation on the thermal evolution of ice-silicate planetary bodies

Several ways in which solid-state deformation could be important in the evolution of an ice-silicate body are considered. The considerations suggest several scenarios for the evolution of Ganymede and Callisto which might be tested on the basis of Voyager and Galileo results. Several potential sources of heat may have caused extensive melting early in the history of these bodies, including a high initial luminosity of Jupiter, accretional heating, gravitational segregation of ice and silicates in a homogeneously accreted body, and deformation by synchronous rotation. The analysis leads to the conclusion that two mechanisms - diapirism and solid-state convection - could be sufficient to inhibit the development of an excessive liquid water mantle, or to cause refreezing of such a mantle formed prior to steady-state conditions or from other heat sources.

Parmentier, E. M.↗