Results for “small payloads” — Page 26

NASA NTRSDate not supplied

Small Spacecraft Sample Return Mission Concept to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Small Spacecraft↗

NASA NTRS2018

The Hayabusa2 Sample Return Mission and Its Small Carry-On Impactor Experiment

On December 3, 2014 the Hayabusa2 Spacecraft was launched by JAXA to investigate and return samples from carbonaceous Asteroid (162173) Ryugu. The spacecraft's payload contains several remote sensing instruments that are designed to characterize the asteroid's surface and to help identify scientifically interesting locations from which samples can be obtained safely. The data collected by these instruments will also help place any obtained samples in context with respect to the global characteristics of Ryugu. In addition to the suite of remote sensing instruments and the sampling device, Hayabusa2 also includes a small carry-on impactor (SCI) payload experiment, which is designed to impact the surface of the asteroid and excavate fresh material for subsequent collection. The SCI consists of a 30 cm diameter 2 kg copper disk that is accelerated by an explosive charge into the surface of Ryugu at approximately 2 km/s. The resultant crater formed during this experiment is estimated to be approximately between 2 - 10 meters in diameter with an ejecta blanket extending to 10 - 100 meters on the asteroid. Hayabusa2 will not be able to observe the impact experiment directly due to considerations of spacecraft safety since there is some risk of collisions with debris from the explosion and ejecta from the crater. However, prior to moving safely away, the spacecraft will deploy a small imaging system called Deployable Camera 3 (DCAM3). DCAM3 will detach from Hayabusa2 just before the detonation of the SCI and will image the moment of impact, crater formation, and ejecta propagation. These data will be transmitted to Hayabusa2 and will help constrain the near-surface properties of Ryugu and also impact scaling laws for small bodies in low gravity environments. These data could also be useful for gaining insights into determining asteroid physical properties from higher velocity impact events (e.g., DART and HERA data of Didymos).

Abell, Paul A.↗

NASA NTRS2011

Low-Cost Propellant Launch to LEO from a Tethered Balloon - 'Propulsion Depots' Not 'Propellant Depots'

As we have previously reported, it may be possible to launch payloads into low-Earth orbit (LEO) at a per-kilogram cost that is one to two orders of magnitude lower than current launch systems, using only a relatively small capital investment (comparable to a single large present-day launch). An attractive payload would be large quantities of high-performance chemical rocket propellant (e.g. Liquid Oxygen/Liquid Hydrogen (LO2/LH2)) that would greatly facilitate, if not enable, extensive exploration of the moon, Mars, and beyond.

Wilcox, Brian H.↗

NASA NTRSDate not supplied

Small Spacecraft Sample Return to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Alan Cassell↗

NASA NTRSDate not supplied

Small Spacecraft Sample Return Mission Concept to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Alan Cassell↗

NASA NTRS2010

Development of a Solar Array Drive Assembly for CubeSat

Small satellites and in particular CubeSats, have increasingly become more viable as platforms for payloads typically requiring much larger bus structures. As advances in technology make payloads and instruments for space missions smaller, lighter and more power efficient, a niche market is emerging from the university community to perform rapidly developed, low-cost missions on very small spacecraft - micro, nano, and picosatellites. In just the last few years, imaging, biological and new technology demonstration missions have been either proposed or have flown using variations of the CubeSat structure as a basis. As these missions have become more complex, and the CubeSat standard has increased in both size (number of cubes) and mass, available power has become an issue. Body-mounted solar cells provide a minimal amount of power; deployable arrays improve on that baseline but are still limited. To truly achieve maximum power, deployed tracked arrays are necessary. To this end, Honeybee Robotics Spacecraft Mechanisms Corporation, along with MMA of Nederland Colorado, has developed a solar array drive assembly (SADA) and deployable solar arrays specifically for CubeSat missions. In this paper, we discuss the development of the SADA.

Passaretti, Mike↗

NASA NTRS2015

Integrated Vehicle and Trajectory Design of Small Spacecraft with Electric Propulsion for Earth and Interplanetary Missions

This paper investigates the feasibility of Earth-transfer and interplanetary mission architectures for miniaturized spacecraft using emerging small solar electric propulsion technologies. Emerging small SEP thrusters offer significant advantages relative to existing technologies and will enable U-class systems to perform trajectory maneuvers with significant Delta V requirements. The approach in this paper is unique because it integrates trajectory design with vehicle sizing and accounts for the system and operational constraints of small U-class missions. The modeling framework includes integrated propulsion, orbit, energy, and external environment dynamics and systems-level power, energy, mass, and volume constraints. The trajectory simulation environment models orbit boosts in Earth orbit and flyby and capture trajectories to interplanetary destinations. A family of small spacecraft mission architectures are studied, including altitude and inclination transfers in Earth orbit and trajectories that escape Earth orbit and travel to interplanetary destinations such as Mercury, Venus, and Mars. Results are presented visually to show the trade-offs between competing performance objectives such as maximizing available mass and volume for payloads and minimizing transfer time. The results demonstrate the feasibility of using small spacecraft to perform significant Earth and interplanetary orbit transfers in less than one year with reasonable U-class mass, power, volume, and mission durations.

Spangelo, Sara↗

NASA NTRS1968

The SDP-3 - A computer for use on board small scientific spacecraft.

Onboard SDP-3 computer data system core for IMP spacecraft, considering payload

Cliff, R. A.↗

NASA NTRS2015

Next Generation UAS Based Spectral Systems for Environmental Monitoring

This presentation provides information on the development of a small Unmanned Aerial System(UAS) with a low power, high performance Intelligent Payload Module (IPM) and a hyperspectral imager to enable intelligent gathering of science grade vegetation data over agricultural fields at about 150 ft. The IPM performs real time data processing over the image data and then enables the navigation system to move the UAS to locations where measurements are optimal for science. This is important because the small UAS typically has about 30 minutes of battery power and therefore over large agricultural fields, resource utilization efficiency is important. The key innovation is the shrinking of the IPM and the cross communication with the navigation software to allow the data processing to interact with desired way points while using Field Programmable Gate Arrays to enable high performance on large data volumes produced by the hyperspectral imager.

onboard processing↗

NASA NTRS1979

Aerocapture - A system design for planetary exploration

The paper presents the results of a study that developed conceptual designs of an atmospheric entry system with moderate to high L/D ratios to establish the concepts of aerocapture into low circular Mars orbits from hyperbolic flyby trajectories. The payloads considered in this study were those currently conceived for the Mars Sample Return (MSR) mission including single mission (SM) and multi-mission (MM) modes. The design concepts developed are also applicable (with small modification) for establishment of closed orbits about Venus and Saturn. The MSR mission payload requires an orbiter, lander, ascent vehicle, and rover, with a total mass of approximately 4000 kg. The emphasis during the study was placed on development of concepts for aerodynamic configuration, the aeroshell design, and a guidance, navigation, and control subsystem.

Cruz, M. I.↗

NASA NTRS1989

NASA's initial flight missions in the Small Explorer Program

A new component of NASA's Explorer Program has been initiated in order to provide research opportunities characterized by small, quick-turn-around, and frequent space missions. Objectives include the launching of one or two payloads per year, depending on mission cost and availability of funds and launch vehicles. The four missions chosen from the proposals solicited by the Small Explorer Announcement Opportunity are discussed in detail. These include the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) designed to carry out energetic particle studies of outstanding questions in the fields of space plasma, solar, heliospheric, cosmic ray, and middle atmospheric physics; the Submillimeter Wave Astronomy Satellite (SWAS), which will conduct both pointed and survey observations of dense galactic molecular clouds; the Fast Auroral Snapshot Explorer (FAST); and the Total Ozone Mapping Spectrometer (TOMS).

Rasch, Nickolus O.↗

NASA NTRS1985

Cosmic X-ray physics

A progress report of research activities carried out in the area of cosmic X-ray physics is presented. The Diffuse X-ray Spectrometer DXS which has been flown twice as a rocket payload is described. The observation times proved to be too small for meaningful X-ray data to be obtained. Data collection and reduction activities from the Ultra-Soft X-ray background (UXT) instrument are described. UXT consists of three mechanically-collimated X-ray gas proportional counters with window/filter combinations which allow measurements in three energy bands, Be (80-110 eV), B (90-187 eV), and O (e84-532 eV). The Be band measurements provide an important constraint on local absorption of X-rays from the hot component of the local interstellar medium. Work has also continued on the development of a calorimetric detector for high-resolution spectroscopy in the 0.1 keV - 8keV energy range.

Mccammon, D.↗

NASA NTRS1989

Tethered Dynamics Explorer and Tethered Atmospheric Probe - A low-cost, low-risk tethered satellite program

A tethered satellite flight program to test theoretical studies of tether concepts is proposed. The program consists of multiple flights of an ELV such as the Delta II, using the Small Expendable Deployment System (SEDS) to deploy two instrumented satellite payloads, the Tethered Dynamics Explorer (TDE) and the Tethered Atmospheric Probe (TAP). The applications and characteristics of the TDE and the TAP are described, including verification of the SEDS, the validation of the dynamics and control model for low-tension deployment and the force and moment instrumentation, the demonstration of tether initiated reentry, the collection of in-situ atmospheric and aerothermodynamic data, and the study of long-term tether exposure.

Deloach, R.↗

NASA NTRS1991

SEDS1 mission software verification using a signal simulator

The first flight of the Small Expendable Deployer System (SEDS1) is scheduled as the secondary payload of a Delta II in late 1992. The objective of the SEDS1 mission is to collect data to validate the concept of tethered satellite systems and to verify computer simulations used to predict their behavior. A series of tests will be performed to exercise the software modules which make up the Mission Software of the SEDS Data System. These tests will be performed by using a SEDS Signal Simulator to generate signals which will simulate the inputs normally produced by sensors and circuits in the SEDS system. The SEDS Signal Simulator will be used in the debugging and in the formal verification of the SEDS1 Mission Software. The Simulator will not only emulate normal flight conditions but also exercise all modules written to handle anticipated anomalous flight conditions, conditions that would be difficult to reproduce and control with actual SEDS hardware. The simulator will help to expedite software development and to increase the confidence of the users of the Mission Software. With little modification, the Simulator should be useful in the software development of future SEDS flights.

Pierson, William E.↗

NASA NTRS1992

JEFF: Air transport system design simulation

Jeff is a remotely piloted vehicle designed by the Blue Team, a division of AE441, Inc., to fulfill the mission proposed by G-Dome Enterprises: to build a cost efficient aircraft to service Aeroworld with overnight cargo delivery. The design of Jeff was most significantly influenced by the need to minimize costs. This objective was pursued by building fewer large planes as opposed to many small planes. Thus, by building an aircraft with a large payload capacity, G-Dome Enterprises will be able to minimize the large costs and the large number of cycles that are associated with a large fleet. Another factor which had a significant influence on our design was the constraint that our design had to fit into a 2'x2'x5' storage container. This constraint meant that unless we wanted to build foldable wings that Jeff's span would be limited to 10 feet. Since this was not enough lifting surface to suit our needs a canard configuration was chosen to get the needed lifting surface and avoid the structural dilemma of foldable wings. The aircraft is constructed mainly of balsa, with spruce wing and canard spars and a monokote covering. It was designed to support a maximum payload weight of 35 oz. (total aircraft weight of 108 oz.) and withstand a maximum load factor of 2.5.

Source record↗

NASA NTRS2001

Titan Airship Surveyor

Saturn's moon Titan is considered to be one of the prime candidates for studying prebiotic materials - the substances that precede the formation of life but have disappeared from the Earth as a result of the evolution of life. A unique combination of a dense, predominantly nitrogen, atmosphere (more than four times that of the Earth), low gravity (six times less than on the Earth) and small temperature variations makes Titan the almost ideal planet for studies with lighter-than-air aerial platforms (aerobots). Moreover, since methane clouds and photochemical haze obscure the surface, low-altitude aerial platforms are the only practical means that can provide global mapping of the Titan surface at visible and infrared wavelengths. One major challenge in Titan exploration is the extremely cold atmosphere (approx. 90 K). However, current material technology the capability to operate aerobots at these very low temperatures. A second challenge is the remoteness from the Sun (10 AU) that makes the nuclear (radioisotopic) energy the only practical source of power. A third challenge is remoteness from the Earth (approx. 10 AU, two-way light-time approx. 160 min) which imposes restrictions on data rates and makes impractical any meaningful real-time control. A small-size airship (approx. 25 cu m) can carry a payload approximately 100 kg. A Stirling engine coupled to a radioisotope heat source would be the prime choice for producing both mechanical and electrical power for sensing, control, and communications. The cold atmospheric temperature makes Stirling machines especially effective. With the radioisotope power source the airship may fly with speed approximately 5 m/s for a year or more providing an excellent platform for in situ atmosphere measurements and a high-resolution remote sensing with unlimited access on a global scale. In a station-keeping mode the airship can be used for in situ studies on the surface by winching down an instrument package. Floating above the surface allows relatively simple means for flight control. Mission requirements and possible methods of navigation, control, data acquisition, and communications are discussed. The presentation describes also the state-of-the art and current progress in aerial deployed aerobots.

Kerzhanovich, V.↗

NASA NTRS2004

Small Satellites and the DARPA/Air Force Falcon Program

The FALCON ((Force Application and Launch from CONUS) program is a technology demonstration effort with three major components: a Small Launch Vehicle (SLV), a Common Aero Vehicle (CAV), and a Hypersonic Cruise Vehicle (HCV). Sponsored by DARPA and executed jointly by the United States Air Force and DARPA with NASA participation, the objectives are to develop and demonstrate technologies that will enable both near-term and far-term capability to execute time-critical, global reach missions. The focus of this paper is on the SLV as it relates to small satellites and the implications of lower cost to orbit for small satellites. The target recurring cost for placing 1000 pounds payloads into a circular reference orbit of 28.5 degrees at 100 nautical miles is $5,000,000 per launch. This includes range costs but not the payload or payload integration costs. In addition to the nominal 1000 pounds to LEO, FALCON is seeking delivery of a range of orbital payloads from 220 pounds to 2200 pounds to the reference orbit. Once placed on alert status, the SLV must be capable of launch within 24 hours.

Weeks, David J.↗

NASA NTRS2014

A Compact Tandem Two-Step Laser Time-of-Flight Mass Spectrometer for In Situ Analysis of Non-Volatile Organics on Planetary Surfaces

Two-step laser desorption mass spectrometry is a well suited technique to the analysis of high priority classes of organics, such as polycyclic aromatic hydrocarbons, present in complex samples. The use of decoupled desorption and ionization laser pulses allows for sensitive and selective detection of structurally intact organic species. We have recently demonstrated the implementation of this advancement in laser mass spectrometry in a compact, flight-compatible instrument that could feasibly be the centerpiece of an analytical science payload as part of a future spaceflight mission to a small body or icy moon.

time-of-flight↗