Search NASA⌕ Search

SEARCH · Search NASA

Results for “soil testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

A Study of Soil and Duricrust Models for Mars

An analysis of soil and duricrust formation mechanisms on Mars is presented. Soil analog mixtures have been prepared, characterized and tested through wet/dry cycling experiments; results are compared with Mars Pathfinder soil data (spectral, chemical and magnetic). Additional information is contained in the original extended abstract.

Bishop, J. L.↗

Progress in Time-Series Soil Moisture Retrieval Using L- and S-Band Radar Backscatter

L- and S-band observations from NASA's Passive/Active L/S band (PALS) sensor from the SMEX02 campaign were used to estimate soil moisture. The retrieval process is based on the “alpha approximation” method. This method utilizes a time-series of normalized radar backscatter measurements as well as ancillary information to estimate soil moisture over the Walnut Creek watershed. The resulting retrieved soil moistures are compared to in-situ soil moisture measurements at multiple test sites within the watershed. The calculations show reasonable results for both L- and S-band and provide further insight into the use of L- and S-bands for the upcoming NASA/ISRO mission.

Soil moisture↗

Corrective Action Decision Document/Corrective Action Plan for Corrective Action Unit 413: Clean Slate II Plutonium Dispersion (TTR) Tonopah Test Range, Nevada. Revision 0

This Corrective Action Decision Document/Corrective Action Plan provides the rationale and supporting information for the selection and implementation of corrective actions at Corrective Action Unit (CAU) 413, Clean Slate II Plutonium Dispersion (TTR). CAU 413 is located on the Tonopah Test Range and includes one corrective action site, TA-23-02CS. CAU 413 consists of the release of radionuclides to the surface and shallow subsurface from the Clean Slate II (CSII) storage–transportation test conducted on May 31, 1963. The CSII test was a non-nuclear detonation of a nuclear device located inside a concrete bunker covered with 2 feet of soil. To facilitate site investigation and the evaluation of data quality objectives decisions, the releases at CAU 413 were divided into seven study groups: 1 Undisturbed Areas 2 Disturbed Areas 3 Sedimentation Areas 4 Former Staging Area 5 Buried Debris 6 Potential Source Material 7 Soil Mounds Corrective action investigation (CAI) activities, as set forth in the CAU 413 Corrective Action Investigation Plan, were performed from June 2015 through May 2016. Radionuclides detected in samples collected during the CAI were used to estimate total effective dose using the Construction Worker exposure scenario. Corrective action was required for areas where total effective dose exceeded, or was assumed to exceed, the radiological final action level (FAL) of 25 millirem per year. The results of the CAI and the assumptions made in the data quality objectives resulted in the following conclusions: The FAL is exceeded in surface soil in SG1, Undisturbed Areas; The FAL is assumed to be exceeded in SG5, Buried Debris, where contaminated debris and soil were buried after the CSII test; The FAL is not exceeded at SG2, SG3, SG4, SG6, or SG7. Because the FAL is exceeded at CAU 413, corrective action is required and corrective action alternatives (CAAs) must be evaluated. For CAU 413, three CAAs were evaluated: no further action, clean closure, and closure in place. The CAAs were evaluated on technical merit focusing on performance, reliability, feasibility, safety, and cost. Based on the evaluation of analytical data from the CAI, review of future and current operations at CAU 413, and the detailed and comparative analysis of CAAs, clean closure was selected as the preferred CAA for CAU 413 by the U.S. Air Force, Nevada Division of Environmental Protection, and U.S. Department of Energy at the CAA meeting held on August 24, 2016.

54 ENVIRONMENTAL SCIENCES↗

The effects of vegetation and soil hydraulic properties on passive microwave sensing of soil moisture: Data report for the 1982 fiels experiments

Field experiments to (1) study the biomass and geometrical structure properties of vegetation canopies to determine their impact on microwave emission data, and (2) to verify whether time series microwave data can be related to soil hydrologic properties for use in soil type classification. Truck mounted radiometers at 1.4 GHz and 5 GHz were used to obtain microwave brightness temperatures of bare vegetated test plots under different conditions of soil wetness, plant water content and canopy structure. Observations of soil moisture, soil temperature, vegetation biomass and other soil and canopy parameters were made concurrently with the microwave measurements. The experimental design and data collection procedures for both experiments are documented and the reduced data are presented in tabular form.

Oneill, P.↗

A step towards a holistic assessment of soil degradation in Europe: Coupling on-site erosion with sediment transfer and carbon fluxes

Highlights: • WaTEM/SEDEM was applied to simulate soil loss and deposition rates at European scale. • Our findings indicate that soil loss in the riverine systems is about 15% of RUSLE2015 estimates. • The estimated sediment yield in Europe totals 0.164 ± 0.013 Pg yr{sup −1}. • We estimate a SOC displacement by water erosion in Europe of 14.5 Tg yr{sup −1}. Soil degradation due to erosion is connected to two serious environmental impacts: (i) on-site soil loss and (ii) off-site effects of sediment transfer through the landscape. The potential impact of soil erosion processes on biogeochemical cycles has received increasing attention in the last two decades. Properly designed modelling assumptions on effective soil loss are a key pre-requisite to improve our understanding of the magnitude of nutrients that are mobilized through soil erosion and the resultant effects. The aim of this study is to quantify the potential spatial displacement and transport of soil sediments due to water erosion at European scale. We computed long-term averages of annual soil loss and deposition rates by means of the extensively tested spatially distributed WaTEM/SEDEM model. Our findings indicate that soil loss from Europe in the riverine systems is about 15% of the estimated gross on-site erosion. The estimated sediment yield totals 0.164 ± 0.013 Pg yr{sup −1} (which corresponds to 4.62 ± 0.37 Mg ha{sup −1} yr{sup −1} in the erosion area). The greatest amount of gross on-site erosion as well as soil loss to rivers occurs in the agricultural land (93.5%). By contrast, forestland and other semi-natural vegetation areas experience an overall surplus of sediments which is driven by a re-deposition of sediments eroded from agricultural land. Combining the predicted soil loss rates with the European soil organic carbon (SOC) stock, we estimate a SOC displacement by water erosion of 14.5 Tg yr{sup −1}. The SOC potentially transferred to the riverine system equals to 2.2 Tg yr{sup −1} (~15%). Integrated sediment delivery-biogeochemical models need to answer the question on how carbon mineralization during detachment and transport might be balanced or even off-set by carbon sequestration due to dynamic replacement and sediment burial.

54 ENVIRONMENTAL SCIENCES↗

Defining the Minimal Set of Microbial Genes Required for Valorization of Lignin Biomass (Final Report)

Project Goals: Lignin is the second most abundant biopolymer on earth and represents a critically underutilized biomass resource for hydrocarbon feedstocks. Despite substantial effort, there is still no efficient process to convert lignin to useable carbon-based platform chemicals and materials. The goal of this project is identify a minimal set of microbial enzymes necessary for lignin breakdown and sufficient for the synthesis of valuable chemical intermediates from lignin isolated as a byproduct of lignocellulosic ethanol production. These genes will be then used to engineer functional whole cell biocatalysts for tunable lignin metabolism. To date, although a number of enzymes have been associated with lignin degradation, most have been tested in isolation (as individual enzymes) and on drastically different substrates -- often dyes that are not related to lignin. In contrast, lignin utilization in nature likely occurs by microbial consortia with multiple enzymes acting synergistically. We propose to examine two separate stages of lignin breakdown carried out by the microbes that do it best: (1) early breakdown of native polymeric lignin into soluble fragments by a set of sequenced wood-rotting fungal species, and (2) downstream metabolism of these soluble lignin fragments to useful chemical intermediates by a panel of sequenced soil saprophytes. Our approach involves testing sets of genes that will be assayed combinatorially in the context of a heterologous expression host. The resulting engineered strains will be systematically assayed using soluble lignin fragments, synthetic defined polymeric lignin, and finally lignin directly sourced from lignocellulosic processing streams. In addition to resulting in a functional whole cell biocatalyst for lignin utilization, we anticipate that this approach will allow us to address key unanswered questions about lignin metabolism in nature, including: (1) Why does the Trametes versicolor genome contain 25 different class II peroxidases? (2) What is the role of laccases in lignin metabolism? Why do some aggressive lignin degraders have many laccases (e.g. >7 in T. versicolor) while others have none (e.g. P. chrysosporium)? (3) How is peroxide provided in a controlled manner to drive peroxidase activity without causing the enzyme inhibition that is so often observed in vitro? (4) What strategies do microbial lignin degraders use to avoid the problem of repolymerization during active lignin degradation? and (5) Can microbial lignin metabolism be diverted for high level production of defined aromatics? A final critical question is whether combining key minimal sets of enzymes from a wide range of organisms will result in engineered strains capable of highly efficient, streamlined pathways for lignin utilization that can be tuned for a specific carbon output. This effort will leverage DOE investments in microbial genome sequencing, and secure a critical channel for lignin biomass utilization that will also help to render lignocellulosic a viable feedstock for the production of renewable liquid biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

Rapid in situ nutrient element distribution in plants and soils using laser-induced breakdown spectroscopy ($\mathrm{LIBS}$)

The aim of this study is to develop and test the applicability of a rapid in situ plant chemistry profiling technique to determine elemental composition of small-volume plant and soil samples obtained from a woody bioenergy crop species, Populus trichocarpa. Expanding the research tools available to characterize the nutrient element correlations among plant tissue types and soil depths is a critical need in the path of understanding productivity and adaptation of plants to variations in external abiotic and biotic factors and developing sustainable perennial bioenergy crops that are co-optimized for biomass valorization aboveground and carbon sequestration belowground. Several plant root, stem, and soil samples were tested using laser-induced breakdown spectroscopy (LIBS) to evaluate the presence and distribution of nutrient elements. Samples were tested as collected and after being dried and cross sectioned to evaluate the effectiveness of using LIBS for in situ analysis on plant samples. The collected LIBS spectra show the elemental peaks were the same in both the as collected and prepared samples for roots and stems. Qualitative amounts of elements such as H, C, N, O, Li, Na, Mg, K, Ca, Fe, Al, and Si were able to be identified rapidly in raw samples. Here in this report we demonstrate suitability of LIBS in obtaining rapid, in situ, elemental distribution in plant and soil samples, utilizing only small sample volumes and minimal sample preparation. This demonstration opens up a new rapid phenotyping avenue necessary to fill the asymmetrical knowledge gaps in belowground performance of plant systems.

59 BASIC BIOLOGICAL SCIENCES↗

Antecedent precipitation index determined from CST estimates of rainfall

This paper deals with an experimental calculation of a satellite-based antecedent precipitation index (API). The index is also derived from daily rain images produced from infrared images using an improved version of GSFC's Convective/Stratiform Technique (CST). API is a measure of soil moisture, and is based on the notion that the amount of moisture in the soil at a given time is related to precipitation at earlier times. Four different CST programs as well as the Geostationary Operational Enviroment Satellite (GOES) Precipitation Index developed by Arkin in 1979 are compared to experimental results, for the Mississippi Valley during the month of July. Rain images are shown for the best CST code and the ARK program. Comparisons are made as to the accuracy and detail of the results for the two codes. This project demonstrates the feasibility of running the CST on a synoptic scale. The Mississippi Valley case is well suited for testing the feasibility of monitoring soil moisture by means of CST. Preliminary comparisons of CST and ARK indicate significant differences in estimates of rain amount and distribution.

Martin, David W.↗

Air Monitoring Network at Tonopah Test Range: Network Description and Capabilities

During the period April to June 2008, at the behest of the U.S. Department of Energy (DOE) National Nuclear Security Administration, Nevada Site Office (NNSA/NSO); the Desert Research Institute (DRI) constructed and deployed two portable environmental monitoring stations at the Tonopah Test Range (TTR) as part of the Environmental Restoration Project Soils Sub-Project. The TTR is located within the boundaries of the Nevada Test and Training Range (NTTR) near the northern edge, and covers an area of approximately 725.20 km2 (179,200 acres). The primary objective of the monitoring stations is to evaluate whether and under what conditions there is wind transport of radiological contaminants from one of the three Soil Sub-Project Corrective Action Units (CAUs) associated with Operation Roller Coaster on TTR. Operation Roller Coaster was a series of tests, conducted in 1963, designed to examine the stability and dispersal of plutonium in storage and transportation accidents. These tests did not result in any nuclear explosive yield. However, the tests did result in the dispersal of plutonium and contamination of surface soils in the surrounding area.

54 ENVIRONMENTAL SCIENCES↗

Microbial formation of stable soil carbon is more efficient from belowground than aboveground input

The relative contributions of aboveground versus belowground plant carbon inputs to the stable soil organic carbon pool are the subject of much debate—with direct implications for how the carbon cycle is modelled and managed. Additionally, the belowground rhizosphere pathway (that is, carbon exiting the living root) is theorized to form stable soil carbon more efficiently than the aboveground pathway. However, while several mechanisms have been invoked to explain this efficiency, few have been empirically tested or quantified. Here, we use soil microcosms with standardized carbon inputs to investigate three posited mechanisms that differentiate aboveground from belowground input pathways of dissolved organic carbon—through the microbial biomass—to the mineral-stabilized soil organic carbon pool: (1) the physical distance travelled, (2) the microbial abundance in the region in which a carbon compound enters (that is, rhizosphere versus bulk soil) and (3) the frequency and volume of carbon delivery (that is, infrequent ‘pulse’ versus frequent ‘drip’). We demonstrate that through the microbial formation pathway, belowground inputs form mineral-stabilized soil carbon more efficiently than aboveground inputs, partly due to the greater efficiency of formation by the rhizosphere microbial community relative to the bulk soil community. However, we show that because the bulk soil has greater capacity to form mineral-stabilized soil carbon due to its greater overall volume, the relative contributions of aboveground versus belowground carbon inputs depend strongly on the ratio of rhizosphere to bulk soil.

54 ENVIRONMENTAL SCIENCES↗

Automatic high-frequency measurements of full soil greenhouse gas fluxes in a tropical forest

Measuring in situ soil fluxes of carbon dioxide (CO 2 ), methane(CH 4 ), and nitrous oxide (N 2 O) continuously at highfrequency requires appropriate technology. We tested the combination of acommercial automated soil CO 2 flux chamber system (LI-8100A) with a CH 4 and N 2 O analyzer (Picarro G2308) in a tropicalrainforest for 4 months. A chamber closure time of 2 min was sufficient fora reliable estimation of CO 2 and CH 4 fluxes (100 %and 98.5 % of fluxes were above minimum detectable flux – MDF,respectively). This closure time was generally not suitable for a reliableestimation of the low N 2 O fluxes in this ecosystem but wassufficient for detecting rare major peak events. A closure time of 25 minwas more appropriate for reliable estimation of most N 2 O fluxes(85.6 % of measured fluxes are above MDF ± 0.002 nmol m -2 s -1 ). Our study highlights the importance ofadjusted closure time for each gas.

54 ENVIRONMENTAL SCIENCES↗

Influence of Nonwetting Phase Saturation on Dispersivity in Laboratory-Scale Sandy Porous Media

Quantification of dispersive mixing is critically important for characterizing and predicting solute transport in porous media. Dispersion is often estimated by fitting to data collected from a nonreactive, conservative tracer test. While this approach may provide quality estimates, the estimate is specific to the site, soil, or experimental conditions in which the test occurred. Currently, there are a limited number of a priori models for estimating dispersivity in fully saturated or air–water systems and no predictive models to account for the presence of nonaqueous phase liquids (NAPL). The overall goal of this paper was to critically assess both established and new models to predict dispersivity based on properties of the porous medium and fluid saturation. To accomplish this, we assembled and reviewed existing laboratory scale dispersivity datasets in sandy porous media. Only 2 of the 10 existing model formulations offer predictive capability (as indicated through Nash–Sutcliffe efficiency [NSE]). This article describes the development of new, empirical models that enhance the ability to predict dispersivity in laboratory-scale water-saturated (NSE increases from 0.40 to 0.83) and air–water (NSE increases from -1.1 to 0.75) systems of sandy porous media. Knowledge of dispersivity under water-saturated conditions further improves prediction of dispersivity in the presence of a nonwetting phase (NSE = 0.90). Finally, the resulting models have utility for systems with transient water saturation, such as those experienced during infiltration and irrigation events, NAPL source depletion, and delivery of foams and emulsions used in site remediation.

54 ENVIRONMENTAL SCIENCES↗

Orion Crew Module Landing System Simulation and Verification

NASA Langley Research Center (LaRC) has developed a comprehensive test and analysis program to evaluate the ability of LS-DYNA to model the materials and the phenomena involved in soil and water landing impacts of the Orion crew module. Elemental, scale boilerplate, and full-scale prototype testing is being conducted in support of the simulation verification and validation approach. Aspects of the simulations evaluated against test data include soil constitutive properties, water equations of state, and contact algorithms. Subsystems tested include airbags, crushable energy absorbing honeycomb materials, and energy absorbing seat support struts. The procedures, instrumentation, and general observations from each test series are presented. Plans for a series of swing tests of a full-scale boilerplate into a purpose-built water basin are described. Further plans for swing tests of flight-like prototypes into the water basin are noted.

Vassilakos, Gregory J.↗

Establishing Validation Sites for Field-Level Emissions Quantification from Grain Sorghum in Southern Great Plains

Establish publicly available open-source, high-resolution datasets of greenhouse gas (GHG) emissions, meteorology, soil, and vegetation to support testing and validation of emerging biofuel production monitoring technologies. The project team deployed latest technologies to collect “Gold Standard” data for field- level fluxes of CO 2 , N 2 O, CH 4 and H 2 O in grain sorghum production systems in Texas, Oklahoma, and Kansas. The Oklahoma State University led SMARTFARM was initiated on Oct 1, 2020, due to COVID-19 pandemic delay. We installed closed-path dual laser Eddy Covariance (EC) flux measurement system along with a well-established open-path EC system for simultaneously measuring field-level fluxes of CO 2 , N 2 O, CH 4 , and H2O. The eddy flux data are combined with sub-acre soil moisture and temperature measurements, plant and soil analysis data (nutrient, composition, carbon, growth, and phenology), spatial surveys of soil EC, and pH. Grain sorghum crop was managed including planting and harvesting by producers. All teams recruited postdocs and students for the project and submitted purchase orders for field equipment. The team has developed a draft impact sheet and finalized the advisory board for the project.

09 BIOMASS FUELS↗

Indoor and Outdoor Test Results for 'DUSST', a Low-Cost, Low-Maintenance PV Soiling Sensor

Soiling can cause significant losses to photovoltaic systems, and therefore it is often measured for the purposes of predicting long-term energy forecasts or for monitoring real time performance and triggering maintenance events as needed. Currently, the most common soiling monitoring technologies are soiling stations that use the electrical outputs of a regularly cleaned PV device and of a naturally soiled PV device to quantify soiling. As part of a new class of low-cost and low-maintenance soiling stations NREL has previously presented 'DUSST'. DUSST projects a collimated monochromatic light source through a glass surface (exposed similarly to the PV modules that need to be monitored) and on to a light detector to measure the intensity of the transmitted light. As the glass surface naturally soils, the losses are quantified by comparing this soiled reading with a calibrated reading under baseline clean condition. This work presents the ongoing improvement of DUSST and the ongoing indoor and outdoor validation of this new soiling sensor.

14 SOLAR ENERGY↗

Visual Sample Plan (VSP) Statistical Software as Related to the CTBTO’s On-Site Inspection Procedure

In the event of a potential nuclear weapons test the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) is commissioned to conduct an on-site investigation (OSI) of the suspected test site in an effort to find confirmatory evidence of the nuclear test. The OSI activities include collecting air, surface soil, and underground samples to search for indications of a nuclear weapons test - these indicators include radionuclides and radioactive isotopes Ar and Xe. This report investigates the capability of the Visual Sample Plan (VSP) software to contribute to the sampling activities of the CTBTO during an OSI. VSP is a statistical sampling design software, constructed under data quality objectives, which has been adapted for environmental remediation and contamination detection problems for the EPA, US Army, DoD and DHS among others. This report provides discussion of a number of VSP sample designs, which may be pertinent to the work undertaken during an OSI. Examples and descriptions of such designs include hot spot sampling, combined random and judgment sampling, multiple increment sampling, radiological transect surveying, and a brief description of other potentially applicable sampling methods. Further, this work highlights a potential need for the use of statistically based sample designs in OSI activities. The use of such designs may enable canvassing a sample area without full sampling, provide a measure of confidence that radionuclides are not present, and allow investigators to refocus resources in other areas of concern.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Lawrence Livermore National Laboratory Experimental Test Site 300 (Site 300): Site 300 Roadway Improvements - Chem Mag Loop Soil Sampling and Analysis Plan (May 2023)

This Soil Sampling and Analysis Plan (SAP) was prepared by the Environmental Function Area (EFA)/Technical Services Department (TSD) of the Environment, Safety & Health (ES&H) Directorate for the Project Management Office (PMO) for the proposed Roadway Improvements Project at the Chem Mag Loop (project). The purpose of the SAP is to describe the procedures for collection and analysis of environmental samples and evaluation of analytical data (chemical and radiological) to determine management options of excavated soil during project construction. This SAP follows criteria established in Lawrence Livermore National Laboratory’s (LLNL) Soils Screening and Management Plan (SSMP) (LLNL 2022), which was formalized in accordance with U.S. Environmental Protection Agency (EPA) guidance for developing Data Quality Objectives for environmental data (EPA 2006) and the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) guidance (U.S. NRC, U.S. EPA, U.S. DOE, and U.S. DOD 2000). The scope of this SAP is based on preliminary design information provided to EFA by PMO.

54 ENVIRONMENTAL SCIENCES↗