Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Cracking the failure of lithium batteries

Lithium batteries that use a solid electrolyte have the potential to improve safety and increase the amount of stored energy . This makes solid-state electrochemical cells a promising option for electric vehicles and wearable devices. However, nonuniform plating or stripping of lithium at the interface between an anode (negative electrode) and the electrolyte during charging and discharging leads to growth of detrimental lithium filaments (dendrites) that short-circuit the battery cell. This problem even occurs when the battery operates at small currents. The underlying mechanism of this failure is not well understood. On page 311 of this issue, Wang et al. (1) report that structural defects accumulate in the lithium metal anode under repeated charging and discharging at a small current. This is similar to mechanical fatigue that is observed over longer periods of intermittent straining of a material. Here, the observation could guide the design of lithium batteries with increased life span.

25 ENERGY STORAGE↗

Recent Progress to Understand and Improve Zeolite Stability in the Aqueous Medium

The work reviewed here attempts to summarize the growing literature on zeolite stability in hot liquid water. This required to first establish the nature, structure and interactions of the active sites in Brønsted and Lewis acidic microporous materials in the presence of liquid water. This understanding was then transferred to zeolite stability and catalyst deactivation. While early results correctly established Si–O–Si hydrolysis as the dominant pathway compared to the Si–O–Al hydrolysis observed in steaming, it also focused extensively on the positive role of framework and extra-framework Al in stabilizing zeolites. However, stability was instead found to more directly correlate with the number of internal structural defects and intraporous water concentration. Stabilization protocols for Brønsted acidic zeolites are described in detail. In the case of Lewis acidic zeolites, their inherent hydrophobic behavior (Si/M >100) makes them more resistant towards water, however, issues such as reversible carbonaceous species formation as well as irreversible metal leaching and fouling remain. Finally, we summarize the most important factors in designing robust and efficient zeolite catalysts made to withstand hot liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Dislocations and Twins As a Result of Uniaxial Compression of Magnesium Single Crystals: Molecular Dynamics Simulation

An atomistic simulation of the deformation of ideal magnesium crystal along the [112̄0] crystallographic axis has been performed. The evolution of structural defects under load at T = 300–350 K is considered in detail. It is established that the nucleation of dislocations in an ideal crystal occurs when the stress reaches a level of 0.1G (G is the shear modulus). The acting deformation modes are found to be prismatic slip of a dislocations and {101̄3} twinning. The formation of dislocation networks and dislocation sites in the twinning plane is observed. Some reactions are proposed to describe the dislocation evolution in the (3̄034) plane.

36 MATERIALS SCIENCE↗

Optimization of the Growth Technology for Crystals with Garnet Structure Based on X-Ray Diffraction Data

High efficiency of the methods of double-crystal X-ray diffractometry (DCXRD) and topography for improving the growth technology of highly homogeneous crystals has been demonstrated on the example of gadolinium gallium garnet (GGG) single crystals. The main types of structural defects observed in Czochralski-grown GGG crystals are found to be macroscopic inhomogeneity of composition distribution, caused by the facet effect manifestation; microinhomogeneous distribution of impurity and main components of the composition in striations; dislocations; and second-phase inclusions. The relationship between the type and density of newly formed defects and the technological conditions for crystal growth are considered. Optimization of the composition of crystals and their growth technology made it possible to obtain high-quality dislocation-free crystals of GGG and complex-substituted garnets on its basis for magneto-optical and microwave devices, elements of solid-state lasers, and other applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of a Strong Magnetic Field on Magnetic Order in Polycrystalline Layered Cobaltites EuBaCo{sub 2 –x}O{sub 5.5 – δ}

The magnetic properties of polycrystalline EuBaCo{sub 2 –x}O{sub 5.5 – δ} (x ≤ 0.1, δ ≤ 0.14) are studied in the temperature range 2 K < T < 300 K in magnetic fields H ≤ 90 kOe. A comparison is made of the dependencies of magnetization M on temperature T and magnetic field H for polycrystalline and single crystal EuBaCo{sub 1.90}O{sub 5.36}, in which only Cu(III) ions are present. It is shown that in the magnetically ordered temperature range of magnetic order, the samples are ferrimagnetic, in which antiferromagnetic interactions between the nearest Co{sup 3+} ions with the same spins compete with the ferromagnetic exchange. With a decrease in temperature, a strong magnetic field affects the magnetic order. At T = 2 K in fields H = 50–90 kOe, all samples exhibit the properties of mictomagnetism. There are a shift in the hysteresis loops M(H) and a large difference in the values of the magnetization of the sample cooled in a magnetic field M (FC) and without a field M (ZFC) due to unidirectional magnetic anisotropy. In this case, there is no saturation of magnetization. The field dependences of magnetization taken in the cooling and heating in unequal fields (CHUF) mode indicate a metastable magnetic state. Near T = 20–30 K, an orientational transition characteristic of micromagnets takes place and a complex ferrimagnetic structure is formed. The main reasons for the manifestation of mictomagnetism properties in layered cobaltites are the presence of magnetoactive Co{sup 3+} ions in the states with intermediate and high spins at low temperatures and structural defects that affect the exchange interaction between the nearest neighbors. Nonmagnetic Co{sup 3+} ions in the low-spin state can also act as defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric Properties of Nanocrystalline Tungsten Oxide in the Temperature Range of 223–293 K

The dielectric properties of nanocrystalline tungsten oxide are studied in the temperature range of 223–293 K and in the frequency range ν = 10{sup –2}–10{sup 6} Hz. Powders of WO{sub 3} with particle sizes of 110, 150, and 200 nm are prepared by the heat treatment of ammonium paratungstate at various temperatures. It is established that the frequency dependences of the conductivity for all samples increase with an increase in frequency, while the polarization characteristics ε'(ν) and ε'(ν) decrease. It is found that the frequency dependences of the conductivity are described by a function of the form ν{sup s} with an index in the range of (0.83–0.90) ± 0.01, which is characteristic of the “hopping” mechanism of charged-particle motion (complexes) over localized states confined by potential barriers and structural defects.

36 MATERIALS SCIENCE↗

The Model of Decomposition of a Fe–Cu Alloy with Concentration-Depending Interatomic Interactions

The thermodynamics and kinetics of decomposition of a Fe–Cu alloy are investigated in the context of a simple ab initio parameterization model taking into account the concentration dependence of the magnetic contribution to the free energy. It is shown that taking into account a difference between the short-range and long-range magnetic orders near the Curie temperature is very important for calculating the solubility of copper in iron. The solubility of copper in bcc iron and the stability limit of a homogeneous state (physical spinodal) are evaluated via the kinetic Monte Carlo method. The impact of structural defects (dislocations and grain boundaries) on these curves, as well as on the kinetic time–temperature—transformation (TTT) diagram, is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Upconversion Luminescence of Gd{sub 2}O{sub 3} Nanocrystals Doped with Er{sup 3+} and Yb{sup 3+} Ions

The upconversion luminescence (UCL) of nanocrystalline gadolinium oxide (Gd{sub 2}O{sub 3}) doped with Er{sup 3+} and Yb{sup 3+} ions has been studied in the temperature range of 90–400 K. The nanocrystals were synthesized by chemical vapor deposition and possessed a cubic crystalline structure with an average particle size within 48–57 nm. It is established that the USL intensity in the red ({sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} transition in Er3+ ion) and green ({sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} transition) spectral regions depends on the sample temperature and concentration of dopant ions, as well as on the additional structural defects (anion vacancies) created in the crystal lattice by the introduction of Zn{sup 2+} ions or irradiation with high-energy (10 MeV) electrons. The luminescence efficiency and spectrum of the upconversion phosphor are determined by energy transfer processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic and Luminescent Properties of Barium Fluoride Nanopowder Obtained by Electron-Beam Evaporation in Low-Pressure Gas

Mesoporous amorphous-crystalline nanopowders of BaF{sub 2} with the specific surface area up to 34.8 m{sup 2}/g were obtained using evaporation by a pulsed electron beam in vacuum. Influence of the thermal annealing of the BaF{sub 2} nanoparticles in air at the temperatures from 200 to 900°C on the size and morphology of the particles and changes in their magnetic and luminescent properties was studied. The paramagnetic response of the BaF{sub 2} nanopowder was found to transform to the ferromagnetic response after annealing at 900°C. The appearance and transformation of the magnetic response in nanopowders made of BaF{sub 2}, which is diamagnetic as the bulk material, are ascribed to the appearance of radiation-induced and structural defects during the synthesis process by pulsed electron-beam evaporation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of the InAlAs Layer Surface Morphology on the Temperature Dependence of Parameters of Au/Ti/n-InAlAs(001) Schottky Diodes

Growth-related structural defects present on the surface of InAlAs layers grown by molecular beam epitaxy on InP(001) substrates influence the temperature dependences of the current–voltage characteristics of Au/Ti/InAlAs Schottky barriers. It is established that these defects in the form of pits cause the appearance of regions with reduced barrier height. At a surface density of ≥10{sup 7} cm{sup –2}, these defects significantly influence the parameters of the Schottky barriers at temperatures below 200 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

pnnl/galas

Codebase for analyzing large atomistic simulation results using graph analytics. Analysis of large molecular simulations is difficult due to size and memory constrains in commonly used analysis software. This code was developed to analyze an ~8 million atom polycrystalline Al system under shear, with a particular emphasis on identifying defect structures. This code applies graph theory to reduce the system to components of interest and applies associated algorithms to characterize these components.

Pope, Jenna (Bilbrey)↗

2D Polyhedral Template Matching for Atomic Resolution Microscopy

SAND2024-13879O The 2D Polyhedral Template Matching for Atomic Resolution Microscopy is a suite of functions for analyzing atomic resolution electron microscopy images using the 2D polyhedral template matching (2D-PTM) method. This software analyzes atomic resolution microscopy data from electron microscopic imaging or scanning probe microscopies. The primary application is for identifying different crystal phases, crystal orientations, and defect structures obtained in such atomic resolution images. Written in MATLAB and starting from an atomic resolution image, the code identifies the positions of atomic intensity peaks. It then matches predefined structural templates to the local atomic environments. Outputs include the local structural identification, the template scaling factor and rotation angle, root-mean-squared deviation (RMSD), and centrosymmetry parameter.

Medlin, Douglas↗

Defects in MX2 Phases (DMX) Dataset: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset.

36 MATERIALS SCIENCE↗

Defects in MX2 (DMX) 2.0: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset. Version 2 includes an auxiliary dataset matched with experiment.

36 MATERIALS SCIENCE↗

Nanoindentation of high-purity vapor deposited lithium films: The elastic modulus

Nanoindentation has been used to measure the elastic modulus of 5 and 18 μm thick high-purity vapor deposited polycrystalline lithium films at 31 °C. Over indentation depths ranging from 150 to 1100 nm, the modulus is found to vary with film thickness from 9.8 GPa ± 11.9% to 8.2 GPa ± 14.5%. These results are well within the range of lithium's orientation dependent elastic modulus, which spans approximately 3.1 to 21.4 GPa. The measured values may also indicate (111) and (100) texture for the 5 and 18 μm thick films, respectively. The potential effects of pileup and surface contamination are found to be negligible if any at all. Small but discernible changes in damping capability near the free surface may provide insight into the subsurface defect structure and the potential for localized heating. In conclusion, numerous experimental challenges are addressed and key metrics are used to validate the measured elastic modulus.

36 MATERIALS SCIENCE↗

Nanoindentation of high-purity vapor deposited lithium films: A mechanistic rationalization of the transition from diffusion to dislocation-mediated flow

Nanoindentation experiments performed in high-purity vapor deposited lithium films at 31 °C reveal a strain rate and length scale dependence in the stress at which pop-in type events signal an abrupt transition from diffusion to dislocation-mediated flow. The stress level at which the transition to dislocation-mediated flow occurs varies with the strain rate and ranges from 88 to 208 times larger than the nominal yield strength of bulk, polycrystalline lithium. Variation in the indentation strain rate reveals the relationship between the stress required to initiate the transition and the length scale at which the transition occurs follows the power-law relation, hardness × depth 1.17 = 1.545 N/m 0.83 , where the magnitude of the exponent and constant reflect the defect structure of the film. In conclusion, a rationalization of the transition is provided through direct comparisons between the measured cumulative distribution function (CDF) and the CDF hypothesized for the activation of a Frank–Read source.

36 MATERIALS SCIENCE↗

Phase, morphology, elemental composition, and formation mechanisms of biogenic and abiogenic Fe-Cu-sulfide nanoparticles: A comparative study on their occurrences under anoxic conditions

In this paper, we report on a systematic study on the physicochemical attributes of synthetic Fe-Cu-sulfide nanoparticles (NPs) precipitated under conditions similar to the anoxic, low temperature aqueous, sedimentary, soil and subsurface environments where these NPs have been repeatedly identified. Characterizing the basic attributes of these NPs is the first step in understanding their behaviors in various processes including in the bio-availability of essential and toxic metals, environmental remediation and resource recovery. All experiments are performed in the presence and absence of the sulfate-reducer Desulfovibrio vulgaris to elucidate biological controls on NP formation. First, the single-metal endmember NPs are determined by precipitation in solution containing either aqueous Fe(II) or Cu(II). Limited differences are observed between biogenic and abiogenic precipitates aged for up to one month; the Fe-only experiments resulted in 4-10 nm mackinawite (FeS) NPs that aggregate to form nanosheets up to ~1,000 nm in size, while the Cu-only experiments resulted in mixtures of covellite (CuS) NPs comprised of <10 nm fine nanocrystals, 20-40 x 6-9 nm nanorods and ~30 nm nanoplates. The crystal sizes of biogenic mackinawite and covellite are respectively larger and smaller than their abiogenic counterparts, indicating a mineral-specific response to biological presence. Structural defects are observable in the fine nanocrystals and nanorods of covellite in both biogenic and abiogenic experiments, indicative of intrinsic NP instability and formation mechanism via particle attachment. In contrast, covellite nanoplates are defect-free, indicating high stability and potentially rapid recrystallization following particle attachment. Next, mixed-metal sulfide NPs are precipitated at variable initial aqueous Fe-to-Cu ratios (2:1, 1:1 and 1:5). With increasing ratio of Fe-to-Cu, Fe-rich covellite, nukundamite (Cu 5.5 FeS 6.5 ), chalcopyrite (CuFeS 2 ), and Cu-rich mackinawite are formed. The Fe-rich covellite NPs are larger (100-200 nm) than covellite precipitated in the absence of Fe, indicating a role for Fe in promoting crystal growth. Chalcopyrite and nukundamite are formed through incorporation of Fe into precursor covellite NPs while retaining the original crystal morphology, as confirmed by doping a covellite suspension with aqueous Fe(II), resulting in the formation of chalcopyrite and nukundamite within days. Additionally, in the biological systems we observe the recrystallization of mackinawite to greigite (Fe 3 S 4 ) after six months of incubation in the absence of Cu, and the selective formation of chalcopyrite and nukundamite at lower initial Fe-to-Cu ratios compared to abiotic systems. These observations are consistent with NP precipitation that are influenced by the distinct (sub)micro-environments around bacterial cells compared to the bulk solution. Lastly, comparative TEM analyses indicate that the synthetic NPs are morphologically similar to NPs identified in natural environments, opening ways to studying behaviors of natural NPs using experimental approaches.

36 MATERIALS SCIENCE↗

Optimal Design and Control of Qubits

Research interest in developing computing systems that represent logic states using quantum mechanical observables has only increased in the few decades since its inception. While quantum computers, with Josephson junction based qubits, have now been commercially available in the last three years, there is also significant research initiative to develop scalable quantum computers with so-called donor qubits. B.E. Kane first published on a device implementation of a silicon-based quantum computer in 1998, which sparked a wave of follow-on advances due to the attractive nature of silicon-based computing[7]. Nearly all commercial computing systems using classical binary logic are fabricated using a silicon substrate and it is inarguably the most mature material system for semiconductor devices, so that coupling classical and quantum bits on a single substrate is possible. The process of growing and processing silicon crystals into wafers is extremely robust and leads to minimal impurities or structural defects.

97 MATHEMATICS AND COMPUTING↗