Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Study Acoustic Emissions from Composites

The nondestructive evaluation (NDE) of future propulsion systems utilizing advanced composite structures for the storage of cryogenic fuels, such as liquid hydrogen or oxygen, presents many challenges. Economic justification for these structures requires, light weight, reusable components with an infrastructure allowing periodic evaluation of structural integrity after enduring demanding stresses during operation. A major focus has been placed on the use of acoustic emission NDE to detect propagating defects, in service, necessitating an extensive study into characterizing the nature of acoustic signal propagation at very low temperatures and developing the methodology of applying AE sensors to monitor cryogenic components. This work addresses the question of sensor performance in the cryogenic environment. Problems involving sensor mounting, spectral response and durability are addressed. The results of this work provides a common point of measure from which sensor selection can be made when testing composite components at cryogenic temperatures.

Walker, James L.↗

Dimer Asymmetry and Light Activation Mechanism in Brucella Blue-Light Sensor Histidine Kinase

The ability to sense and respond to environmental cues is essential for adaptation and survival in living organisms. In bacteria, this process is accomplished by multidomain sensor histidine kinases that undergo autophosphorylation in response to specific stimuli, thereby triggering downstream signaling cascades. However, the molecular mechanism of allosteric activation is not fully understood in these important sensor proteins. Here, we report the full-length crystal structure of a blue light photoreceptor LOV histidine kinase (LOV-HK) involved in light-dependent virulence modulation in the pathogenic bacterium Brucella abortus. Joint analyses of dark and light structures determined in different signaling states have shown that LOV-HK transitions from a symmetric dark structure to a highly asymmetric light state. The initial local and subtle structural signal originated in the chromophore-binding LOV domain alters the dimer asymmetry via a coiled-coil rotary switch and helical bending in the helical spine. These amplified structural changes result in enhanced conformational flexibility and large-scale rearrangements that facilitate the phosphoryl transfer reaction in the HK domain.

59 BASIC BIOLOGICAL SCIENCES↗

Methods of forming triuranium disilicide structures, and related fuel rods for light water reactors

A method of forming a triuranium disilicide structure comprises forming a mixture comprising uranium particles and silicon particles. The mixture is pressed to form a compact comprising the uranium particles and the silicon particles. The compact is subjected to an arc melting process to form a preliminary triuranium disilicide structure. The preliminary triuranium disilicide structure is subjected to a comminution process to form a fine triuranium disilicide powder. The fine triuranium disilicide powder is pressed to form a green triuranium disilicide structure. The green triuranium disilicide structure is then sintered. Additional methods of forming a triuranium disilicide structure are also described, as are fuel rods for light water reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Light-induced lattice expansion leads to high-efficiency perovskite solar cells

Light-induced structural dynamics plays a vital role in the physical properties, device performance, and stability of hybrid perovskite–based optoelectronic devices. We report that continuous light illumination leads to a uniform lattice expansion in hybrid perovskite thin films, which is critical for obtaining high-efficiency photovoltaic devices. Correlated, in situ structural and device characterizations reveal that light-induced lattice expansion benefits the performances of a mixed-cation pure-halide planar device, boosting the power conversion efficiency from 18.5 to 20.5%. The lattice expansion leads to the relaxation of local lattice strain, which lowers the energetic barriers at the perovskite-contact interfaces, thus improving the open circuit voltage and fill factor. The light-induced lattice expansion did not compromise the stability of these high-efficiency photovoltaic devices under continuous operation at full-spectrum 1-sun (100 milliwatts per square centimeter) illumination for more than 1500 hours.

14 SOLAR ENERGY↗

Structural Diversity in White-Light-Emitting Hybrid Lead Bromide Perovskites

Hybrid organic–inorganic halide perovskites are under intense investigations because of their astounding physical properties and promises for optoelectronics. Lead bromide and chloride perovskites exhibit intrinsic white-light emission believed to arise from self-trapped excitons (STEs). Here, we report a series of new structurally diverse hybrid lead bromide perovskites that have broad-band emission at room temperature. They feature Pb/Br structures which vary from 1D face-sharing structures to 3D corner- and edge-sharing structures. Through single-crystal X-ray diffraction and low-frequency Raman spectroscopy, we have identified the local distortion level of the octahedral environments of Pb 2+ within the structures. The band gaps of these compounds range from 2.92 to 3.50 eV, following the trend of “corner-sharing < edge-sharing < face-sharing”. Density functional theory calculations suggest that the electronic structure is highly dependent on the connectivity mode of the PbBr 6 octahedra, where the edge- and corner-sharing 1D structure of (2,6-dmpz) 3 Pb 2 Br 10 exhibits more disperse bands and smaller band gap (2.49 eV) than the face-sharing 1D structure of (hep)PbBr 3 (3.10 eV). Using photoemission spectroscopy, we measured the energies of the valence band of these compounds and found them to remain almost constant, while the energy of conduction bands varies. Temperature-dependent PL measurements reveal that the 2D and 3D compounds have narrower PL emission at low temperature (~5 K), whereas the 1D compounds have both free exciton emission and STE emission. Furthermore, the 1D compound (2,6-dmpz) 3 Pb 2 Br 10 has the highest photoluminescence quantum yield of 12%, owing to its unique structure that allows efficient charge carrier relaxation and light emission.

14 SOLAR ENERGY↗

Mapping local deformation behavior in single cell metal lattice structures

The deformation behavior of metal lattice structures is extremely complex and challenging to predict, especially since strain is not uniformly distributed throughout the structure. Understanding and predicting the failure behavior for these types of light-weighting structures is of great interest due to the excellent scaling of stiffness- and strength-to weight ratios they display. Therefore, there is a need to perform simplified experiments that probe unit cell mechanisms. This study reports on high resolution mapping of the heterogeneous structural response of single unit cells to the macro-scale loading condition. Two types of structures, known to show different stress-strain responses, were evaluated using synchrotron radiation micro-tomography while performing in-situ uniaxial compression tests to capture the local micro-strain deformation. These structures included the octet-truss, a stretch-dominated lattice, and the rhombic-dodecahedron, a bend-dominated lattice. The tomographic analysis showed that the stretch- and bend-dominated lattices exhibit different failure mechanisms and that the defects built into the structure cause a heterogeneous localized deformation response. Also shown here is a change in failure mode for stretch-dominated lattices, where there appears to be a transition from buckling to plastic yielding for samples with a relative density between 10 and 20%. In conclusion, the experimental results were also used to inform computational studies designed to predict the mesoscale deformation behavior of lattice structures. Here an equivalent continuum model and a finite element model were used to predict both local strain fields and mechanical behavior of lattices with different topologies.

36 MATERIALS SCIENCE↗

Formation of pyrophosphates across grain boundaries induces the formation of mismatched but oriented interfaces in silver phosphate polypods

The interfaces and their misfit defects determine the materials properties for a wide range of applications, such as electronic devices, photocatalysis, and mechanical engineering, etc. However, current understanding of atomic interfacial structures is limited. Here we discover a special interfacial structure, mismatched but oriented interface via two distinct facets. Transmission and scanning electron microscopy results suggest that, in Ag 3 PO 4 polypods structures, interfaces of {1 0 0} and {1 1 0}, ({1 0 0}/(1 1 0}), {1 0 0}/{1 1 1}, {1 1 0}/{1 1 1}, and {1 0 0}/{1 0 0}, etc., have a certain orientation relationship, corresponding to the energy minima and coincident site lattice of interfacial atoms as demonstrated by molecular dynamics simulations. Density functional theory demonstrates that the formation of pyrophosphate and/or phosphates rotation to bond across the interface compensate the lattice mismatch at the interfaces, as well as deformations of Ag-O bonds. Furthermore, our work opens up a new avenue for a much wider range of interfacial structures, allow for a higher diversity of structures, and shine light on tailoring crystal structures, morphologies, and the resulting properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Illumination and radiative cooling

Aspects of the present disclosure are directed to providing and/or controlling electromagnetic radiation. As may be implemented in accordance with one or more embodiments, an apparatus includes a first structure that contains an object, and a second structure that is transparent at solar wavelengths and emissive in the atmospheric electromagnetic radiation transparency window. The second structure operates with the first structure to pass light into the first structure for illuminating the object, and to radiatively cool the object while preserving the object's color.

47 OTHER INSTRUMENTATION↗

Structural insights into photoactivation of plant Cryptochrome-2

Cryptochromes (CRYs) are evolutionarily conserved photoreceptors that mediate various light-induced responses in bacteria, plants, and animals. Plant cryptochromes govern a variety of critical growth and developmental processes including seed germination, flowering time and entrainment of the circadian clock. CRY’s photocycle involves reduction of their flavin adenine dinucleotide (FAD)-bound chromophore, which is completely oxidized in the dark and semi to fully reduced in the light signaling-active state. Despite the progress in characterizing cryptochromes, important aspects of their photochemistry, regulation, and light-induced structural changes remain to be addressed. In this study, we determine the crystal structure of the photosensory domain of Arabidopsis CRY2 in a tetrameric active state. Systematic structure-based analyses of photo-activated and inactive plant CRYs elucidate distinct structural elements and critical residues that dynamically partake in photo-induced oligomerization. Our study offers an updated model of CRYs photoactivation mechanism as well as the mode of its regulation by interacting proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Role of quantum fluctuations in structural dynamics of liquids of light molecules

A possible role of quantum effects, such as tunneling and zero-point energy, in the structural dynamics of supercooled liquids is studied by dielectric spectroscopy. Our results demonstrate that the liquids, bulk 3-methyl pentane and confined normal and deuterated water, have low glass transition temperature and unusually low for their class of materials steepness of the temperature dependence of structural relaxation (fragility). Although we do not find any signs of tunneling in the structural relaxation of these liquids, their unusually low fragility can be well described by the influence of the quantum fluctuations. Confined water presents an especially interesting case in comparison to the earlier data on bulk low-density amorphous and vapor deposited water. Confined water exhibits a much weaker isotope effect than bulk water, although the effect is still significant. Here, we show that it can be ascribed to the change of the energy barrier for relaxation due to a decrease in the zeropoint energy upon D/H substitution. We observed a difference in the behavior of confined and bulk water demonstrates high sensitivity of quantum effects to the barrier heights and structure of water. Moreover, these results demonstrate that extrapolation of confined water properties to the bulk water behavior is questionable.

74 ATOMIC AND MOLECULAR PHYSICS↗

All-optical photochromic spatial light modulators based on photoinduced electron transfer in rigid matrices

A single material (not a multi-element structure) spatial light modulator may be written to, as well as read out from, using light. The device has tailorable rise and hold times dependent on the composition and concentration of the molecular species used as the active components. The spatial resolution of this device is limited only by light diffraction as in volume holograms. The device may function as a two-dimensional mask (transmission or reflection) or as a three-dimensional volume holographic medium. This device, based on optically-induced electron transfer, is able to perform incoherent to coherent image conversion or wavelength conversion over a wide spectral range (ultraviolet, visible, or near-infrared regions).

Beratan, David N.↗

Mechanisms for light induced degradation in MAPbI 3 perovskite thin films and solar cells

Organometal halide perovskites are highly promising materials for photovoltaic applications, yet their rapid degradation remains a significant challenge. Here, the light-induced structural degradation mechanism of methylammonium lead iodide (MAPbI 3 ) perovskite films and devices is studied in low humidity environment using X-Ray Diffraction, Ultraviolet-Visible (UV-Vis) absorption spectroscopy, Extended X-ray Absorption Fine Structure spectroscopy, Fourier Transform Infrared spectroscopy, and device measurements. Under dry conditions, the perovskite film degrades only in the presence of both light and oxygen, which together induce the formation of halide anions through donation of electrons to the surrounding oxygen. The halide anions generate free radicals that deprotonate the methylammonium cation and form the highly volatile CH 3 NH 2 molecules that escape and leave pure PbI 2 behind. The device findings show that changes in the local structure at the TiO 2 mesoporous layer occur with light, even in the absence of oxygen, and yet such changes can be prevented by the application of UV blocking layer on the cells. Our results indicate that the stability of mp-TiO 2 -MAPbI 3 photovoltaics can be dramatically improved with effective encapsulation that protects the device from UV light, oxygen, and moisture.

25 ENERGY STORAGE↗

Active member bridge feedback control for damping augmentation

An active damping augmentation approach using active members in a structural system is described. The problem of maximizing the vibration damping in a lightly damped structural system is considered using the analogy of impedance matching between the load and source impedances in an electrical network. The proposed active damping augmentation approach therefore consists of finding the desired active member impedances that maximize the vibration damping, and designing a feedback control in order to achieve desired active member impedances. This study uses a bridge feedback concept that feeds back a combination of signals from sensors of the axial force and relative velocity across the active member to realize the desired active member impedance. The proposed active damping augmentation approach and bridge feedback concept were demonstrated on a three-longeron softly suspended truss structure.

Chen, Gun-Shing↗

Study of a 30-M Boom For Solar Sail-Craft: Model Extendibility and Control Strategy

Space travel propelled by solar sails is motivated by the fact that the momentum exchange that occurs when photons are reflected and/or absorbed by a large solar sail generates a small but constant acceleration. This acceleration can induce a constant thrust in very large sails that is sufficient to maintain a polar observing satellite in a constant position relative to the Sun or Earth. For long distance propulsion, square sails (with side length greater than 150 meters) can reach Jupiter in two years and Pluto in less than ten years. Converting such design concepts to real-world systems will require accurate analytical models and model parameters. This requires extensive structural dynamics tests. However, the low mass and high flexibility of large and light weight structures such as solar sails makes them unsuitable for ground testing. As a result, validating analytical models is an extremely difficult problem. On the other hand, a fundamental question can be asked. That is whether an analytical model that represents a small-scale version of a solar-sail boom can be extended to much larger versions of the same boom. To answer this question, we considered a long deployable boom that will be used to support the solar sails of the sail-craft. The length of fully deployed booms of the actual solar sail-craft will exceed 100 meters. However, the test-bed we used in our study is a 30 meter retractable boom at MSFC. We first develop analytical models based on Lagrange s equations and the standard Euler-Bernoulli beam. Then the response of the models will be compared with test data of the 30 meter boom at various deployed lengths. For this stage of study, our analysis was limited to experimental data obtained at 12ft and 18ft deployment lengths. The comparison results are positive but speculative. To observe properly validate the analytic model, experiments at longer deployment lengths, up to the full 30 meter, have been requested. We expect the study to answer the extendibility question of the analytical models. In operation, rapid temperature changes can be induced in solar sails as they transition from day to night and vice versa. This generates time dependent thermally induced forces, which may in turn create oscillation in structural members such as booms. Such oscillations have an adverse effect on system operations, precise pointing of instruments and antennas and can lead to self excited vibrations of increasing amplitude. The latter phenomenon is known as thermal flutter and can lead to the catastrophic failure of structural systems. To remedy this problem, an active vibration suppression system has been developed. It was shown that piezoelectric actuators used in conjunction with a Proportional Feedback Control (PFC) law (or Velocity Feedback Control (VFC) law) can induce moments that can suppress structural vibrations and prevent flutter instability in spacecraft booms. In this study, we will investigate control strategies using piezoelectric transducers in active, passive, and/or hybrid control configurations. Advantages and disadvantages of each configuration will be studied and experiments to determine their capabilities and limitations will be planned. In particular, special attention will be given to the hybrid control, also known as energy recycling, configuration due to its unique characteristics.

Keel, Leehyun↗

Light and unbound nuclei: An introduction to ab initio methods in nuclear structure and reaction theory

Light nuclei display a wide variety of phenomena: from stable bound states, to rare unstable isotopes and transient resonances, to mutual dynamical interactions during a reaction. Here, after an overview of these phenomena, basic formalism and concepts in ab initio nuclear structure and reaction theory are introduced, followed by selected examples of how powerful techniques for the description of the nuclear force and the solution of the nuclear quantum many-body problem combined with cutting-edge high-performance computing are enabling a comprehensive understanding of light exotic nuclei and thermonuclear reactions that play an important role in the Cosmos and on Earth.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bulk Assembly of Zero-Dimensional Organic Lead Bromide Hybrid with Efficient Blue Emission

Zero-dimensional (0D) organic metal halide hybrids are an emerging class of light emitting materials with exceptional photoluminescence quantum efficiencies (PLQEs), thanks to their perfect “host–guest” structures with light emitting metal halide species periodically “embedded” in a wide band gap organic cationic matrix through ionic bonds. However, achieving efficient blue emissions is challenging for this class of materials, as structural distortions of metal halides often lead to large Stokes shifts. Here we report a highly luminescent blue emitting 0D organic lead bromide, (C 13 H 19 N 4 ) 2 PbBr 4 , with a peak emission of 460 nm (2.70 eV), a full width at half maximum (FWHM) of 66 nm (0.40 eV), a Stokes shift of 111 nm (0.85 eV), and a PLQE of ~40%. Single crystal structure analysis shows that individual PbBr 4 2– species adopt a near-seesaw structure, which are coordinated to benzyl-hexamethylenetetrammonium (C 13 H 19 N 4 + ) organic cations. The relatively small Stokes shift as compared to those of previously reported 0D organic metal halide hybrids are attributed to the low chemical reactivity of Pb 6s 2 lone pairs and the rigid organic cationic matrix. Finally, (C 13 H 19 N 4 ) 2 PbBr 4 also shows exceptional stability in air with little-to-no change of properties for more than a year in ambient conditions.

36 MATERIALS SCIENCE↗

Omnidirectional resonance in a metal_dielectric_metal geometry

We show that a planar metallic microcavity structure can exhibit an omnidirectional resonance, i.e., a resonance for which the resonance wavelength is independent of the incidence angle of light. The structure consists of a metal-dielectric-metal configuration. The omnidirectional resonance occurs when the reflection phase shift cancels the propagation shift. We numerically demonstrate such an omnidirectional resonance in an Ag-SiO{sub 2}-Ag structure with realistic material parameters. Such omnidirectionally resonant structures are important for all-angle efficiency enhancement in light emitting diodes and photodetectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design of Non-Deterministic Quasi-random Nanophotonic Structures Using Fourier Space Representations

Despite their seemingly random appearances in the real space, quasi-random nanophotonic structures exhibit distinct structural correlations and have been widely utilized for effective photon management. However, current design approaches mainly rely on the deterministic representations consisting two-dimensional (2D) discretized patterns in the real space. They fail to capture the inherent non-deterministic characteristic of the quasi-random structures and inevitably result in a large design dimensionality. Here, we report a new design approach that employs the one-dimensional (1D) spectral density function (SDF) as the unique representation of non-deterministic quasi-random structures in the Fourier space with greatly reduced design dimensionality. One 1D SDF representation can be used to generate infinite sets of real space structures in 2D with equally optimized performance, which was further validated experimentally using light-trapping structures in a thin film absorber as a model system. The optimized non-deterministic quasi-random nanostructures improve the broadband absorption by 225% over the unpatterned cell.

Science & Technology - Other Topics↗