SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Fundamental mechanisms that influence the estimate of heat transfer to gas turbine blades

Heat tranfer problems in aircraft gas turbines required for improved prediction of turbine blade or vane gas-side heat transfer are examined. Estimates of the heat transfer from the gas to vanes or rotating blades are uncertain due to the complexity of the heat transfer processes, since the gas flow is three dimensional with complex secondary viscous flow patterns that interact with the endwalls and blade surfaces. In addition, upstream disturbances, stagnation flow, curvature effects, and flow acceleration complicate the thermal transport mechanisms in the boundary layers. The thermal state and flow characteristics of the hot gases that enter the turbine blade row, analytical methods for calculating the gas-side heat transfer to turbine blades, and flow phenomena such as stagnation, curvature effects, acceleration, secondary flows, and transition that influences local heat transfer rates are discussed.

Graham, R. W.↗

NASA NTRS1979

Field-aligned current sources in the high-latitude ionosphere

The paper determines the electric potential in a plane which is fed current from a pair of field-aligned current sheets. The ionospheric conductivity is modelled as a constant with an enhanced conductivity annular ring. It is shown that field-aligned current distributions are arbitrary functions of azimuth angle (MLT) and thus allow for asymmetric potential configurations over the pole cap. In addition, ionospheric surface currents are computed by means of stream functions. Finally, the discussion relates these methods to the electrical characteristics of the magnetosphere.

Barbosa, D. D.↗

NASA NTRS1980

Three dimensional spline-generated coordinate transformations for grids around wing-body configurations

A direct algebraic method was developed and applied to generate three dimensional grids around wing-body configurations. The method used is a generalized transfinite interpolation method which generates the desired coordinate transformation using geometric data only on the boundaries of the domain of interest. The geometric data that can be specified includes not only coordinates on the boundaries but also out-of-surface parametric derivatives that give a very precise control over the transformation in the vicinity of the surface. In addition to this, the method gives good control over the stretching of the mesh between different boundaries.

Eriksson, L. E.↗

NASA NTRS1981

Interactive multi-mode blade impact analysis

This paper describes the theoretical methodology used in developing an analysis for the response of turbine engine fan blades subjected to soft body (bird) impacts and the computer program that was developed using this methodology as its basis. This computer program is an outgrowth of two programs that were previously developed for the purpose of studying problems of a similar nature (a three-mode beam impact analysis and a multi-mode beam impact analysis). The present program utilizes an improved missile model that is interactively coupled with blade motion which is more consistent with actual observations. It takes into account local deformation at the impact area, blade camber effects, and the spreading of the impacted missile mass on the blade surface. In addition, it accommodates plate-type mode shapes. The analysis capability in this computer program represents a significant improvement in the development of the methodology for evaluating potential fan blade materials and designs with regard to foreign object impact resistance.

Alexander, A.↗

NASA NTRS1981

Genesis of recent silicic magmatism in the Medicine Lake Highland, California - Evidence from cognate inclusions found at Little Glass Mountain

Sparse, granular inclusions of early-formed minerals found within the Little Glass Mountain rhyolite flows in northern California are shown to provide a means of characterizing the physical conditions, at depth, beneath the Medicine Lake Highland during the latest phase of volcanic activity. Mineral compositions, in combination with thermodynamic calculations and experiments, suggest crystalization at a pressure of 5,200 bars within a 966-836 C temperature range; implying that mineral segregation and equilibration occurred at a depth of 15-18 km beneath the surface. In addition, mass balance calculations indicate that the Medicine Lake flow is a close approximation to the parental magma for the latest silicic lavas.

Mertzman, S. A.↗

NASA NTRS1981

Progress in radar snow research

Multifrequency measurements of the radar backscatter from snow-covered terrain were made at several sites in Brookings, South Dakota, during the month of March of 1979. The data are used to examine the response of the scattering coefficient to the following parameters: (1) snow surface roughness, (2) snow liquid water content, and (3) snow water equivalent. The results indicate that the scattering coefficient is insensitive to snow surface roughness if the snow is drv. For wet snow, however, surface roughness can have a strong influence on the magnitude of the scattering coefficient. These observations confirm the results predicted by a theoretical model that describes the snow as a volume of Rayleig scatterers, bounded by a Gaussian random surface. In addition, empirical models were developed to relate the scattering coefficient to snow liquid water content and the dependence of the scattering coefficient on water equivalent was evaluated for both wet and dry snow conditions.

Stiles, W. H.↗

NASA NTRS1982

Infrared emission spectrophotometric study of the changes produced by TiN coating of metal surfaces in an operating EHD contact

Infrared emission spectra and related measurements were obtained from an operating ball/plate elastohydrodynamic (EHD) sliding contact under a variety of operating conditions. In order to be able to compare the effect of the ball surface, some of the balls were coated with a thin layer of titanium nitride (TiN) by vapor deposition. Polyphenyl ether (5P4E) was used as lubricant and 1 percent of 1,1,2-trichloroethane (TCE) as a surface-probing additive. TiN is chemically inert and its thermal conductivity is lower than that of steel. Therefore, the overall temperatures with TiN coated balls were higher. Nevertheless, no scuffing was observed with the coated balls under conditions giving rise to scuffing with the uncoated balls. Tractions were lower with the TiN coated balls and always when TCE was added to the 5P4E. These findings were found to be inversely related to the degree of polarization of the spectral emission bands. The intensity and the dichrosim of these bands were related to shear rates and inlet conditions of the EHD contact.

Keller, L. E.↗

NASA NTRS1982

The useful potential of using existing data to uniquely identify predictable wind events and regimes, part 2

Wind data from four sites were stratified and found to naturally fit into a few unique groups. These were compared with synoptic weather patterns using the Booz-Allen classification system. Strong relationships became evident between a particular synoptic type and wind events for each site. Statistics indicate certain patterns which result in strong winds and some that result in weak winds. For each site there is a preferred wind direction associated with the strongest speed. Important relationships were also found comparing 850-mb and surface wind. Additionally, comparisons between pressure gradient and wind speed for a given gradient direction show some significant relationships. It can be stated that the overall results show what by using existing data for any site, the winds can be characterized and correlated with synoptic weather patterns. As a result, reliable wind forecasts can be made for utility companies for the purpose of power generation.

Notis, C.↗

NASA NTRS1981

International Geoscience and Remote Sensing Symposium, Washington, DC, June 8-10, 1981, Digest. Volumes 1 & 2

Sensors used for the geophysical and remote sensing studies are reviewed; in particular, NIMBUS-7 Scanning Multichannel Microwave Radiometer results are given. Remote sensing analyses consider such areas as hydrology, soil moisture, and planetary surfaces. In addition, Shuttle remote sensing experiments and SAR systems, remote sensing in the thermal infrared, and microwave remote sensing of the earth are considered. Finally, attention is given to lithologic and geobotanical studies, and geophysical sensing techniques and inversion theory.

Source record↗

NASA NTRS1983

Heat transfer characteristics for jet array impingement with initial crossflow

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. In addition to the crossflow which originates from the jets following impingement, an initial crossflow is present which approaches the array through an upstream extension of the channel. The temperature of the initial crossflow air may differ from the jet air temperature. The configurations considered are intended to model the impingement cooled midchord region of gas turbine airfoils in cases where an initial crossflow is also present. Nusselt numbers and dimensionless adiabatic wall temperatures resolved to one streamwise jet hole spacing were experimentally determined for ratios of the initial crossflow rate to the total jet flow rate ranging from zero to unity. These are presented and discussed relative to the flow and geometric parameters.

Florschuetz, L. W.↗

NASA NTRS1983

Three-dimensional unsteady Euler equation solutions using flux vector splitting

A method for numerically solving the three dimensional unsteady Euler equations using flux vector splitting is developed. The equations are cast in curvilinear coordinates and a finite volume discretization is used. An explicit upwind second-order predictor-corrector scheme is used to solve the discretized equations. The scheme is stable for a CFL number of two and local time stepping is used to accelerate convergence for steady-state problems. Characteristic variable boundary conditions are developed and used in the far field and at surfaces. No additional dissipation terms are included in the scheme. Numerical results are compared with results from an existing three dimensional Euler code and experimental data.

Whitfield, D. L.↗

NASA NTRS1984

Three-dimensional unsteady Euler equations solution using flux vector splitting

A method for numerically solving the three-dimensional unsteady Euler equations using flux vector splitting is developed. The equations are cast in curvilinear coordinates and a finite volume discretization is used. An explicit upwind second-order predictor-corrector scheme is used to solve the discretized equations. The scheme is stable for a CFL number of 2 and local time stepping is used to accelerate convergence for steady-state problems. Characteristic variable boundary conditions are developed and used in the far-field and at surfaces. No additional dissipation terms are included in the scheme. Numerical results are compared with results from an existing three-dimensional Euler code and experimental data.

Whitfield, D. L.↗

NASA NTRS1985

Comparisons of various configurations of the edge delamination test for interlaminar fracture toughness

Various configurations of Edge Delamination Tension (EDT) test specimens, of both brittle (T300/5208) and toughened-matrix (T300/BP907) graphite reinforced composite laminates, were manufactured and tested. The mixed-mode interlaminar fracture toughness, G sub C, was measured using (30/30 sub 2/30/90 sub N)sub s, n=1 or 2, (35/-35/0/90) sub s and (35/0/-35/90) sub s layups designed to delaminate at low tensile strains. Laminates were made without inserts so that delaminations would form naturally between the central 90 deg plies and the adjacent angle plies. Laminates were also made with Teflon inserts implanted between the 90 deg plies and the adjacent angle (theta) plies at the straight edge to obtain a planar fracture surface. In addition, interlaminar tension fracture toughness, GIc, was measured from laminates with the same layup but with inserts in the midplane, between the central 90 deg plies, at the straight edge. All of the EDT configurations were useful for ranking the delamination resistance of composites with different matrix resins. Furthermore, the variety of layups and configurations available yield interlaminar fracture toughness measurements needed to generate delamination failure criteria. The influence of insert thickness and location, and coupon size on G sub c values were evaluated.

Obrien, T. K.↗

NASA NTRS1984

Modeling crater topography and albedo from monoscopic Viking Orbiter images. I - Methodology

The methodology for a new photoclinometric technique for extracting topographic data from planetary images is described. The technique fully compensates for oblique viewing geometry prevalent in many spacecraft images. Brightness data are taken from a pair of profiles simultaneously, overcoming the problem of albedo variations in the application of photoclinometry to planetary surfaces. An additional procedure is described for eliminating the requirement of topographic symmetry along a pair of profiles. Test results show that both procedures have an accuracy of about two degrees for slopes of typical bowl-shaped craters, or about 5 percent for depths.

Davis, P. A.↗

NASA NTRS1986

Aerodynamic measurements of an airfoil with simulated glaze ice

An experimental study has been conducted in the OSU subsonic tunnel to measure the detailed aerodynamic characteristics of an airfoil with simulated glaze ice. A special model was built with interchangeable leading edges to be used in this study. One leading edge is that of a NACA 0012, while the other is a simulation of a glaze ice accretion measured in the NACA Lewis Icing Research Tunnel. The model was instrumented with a dense distribution of surface pressure taps to provide excellent detail around the ice shapes and reattachment point. A traversing total pressure probe was used to document the boundary layer characteristics on the NACA 0012 section. The ice shape caused a severe lift and drag penalty, reducing the maximum lift by over 50 percent and causing a 300 percent increase in drag. Surface pressure distributions revealed a large lower surface separation in addition to the expected large upper surface separation.

Bragg, M. B.↗

NASA NTRS1986

Solvability condition for needle crystals at large undercooling in a nonlocal model of solidification

It is explicitly shown that, in a realistic model of diffusion-controlled dendritic solidification, Ivantsov's continuous family of steady-state needle crystals is destroyed by the addition of surface tension. The starting point is in the exact integro-differential equation for the one-sided model, in two dimensions, in a moving frame of reference. In the limit of large undercooling, where the range of the diffusion field is much smaller than the radius of curvature of the tip of the needle, this problem is reduced to a linear, inhomogeneous differential equation of infinite order. A solvability condition for this equation is derived and it is shown that solutions cease to exist for arbitrarily small but finite isotropic surface tension.

Caroli, B.↗

NASA NTRS1986

Angle-resolved Auger electron spectra induced by neon ion impact on aluminum

Auger electron emission from aluminum bombarded with 1 to 5 keV neon ions was studied by angle-resolved electron spectroscopy. The position and shape of the spectral features depended on the incident ion energy, angle of ion incidence, and electron take-off angle with respect to the aluminum surface. These spectral dependencies were interpreted in terms of the Doppler shift given to the Auger electron velocity by the excited atom ejected into the vacuum. For oblique ion incidence it is concluded that a flux of high energy atoms are ejected in a direction close to the projection of the ion beam on the target surface. In addition, a new spectral feature was found and identified as due to Auger emission from excited neon in the aluminum matrix.

Pepper, S. V.↗

NASA NTRS1986

Mathematical model for the Bridgman-Stockbarger crystal growing system

In a major technical breakthrough, a computer model for Bridgman-Stockbarger crystal growth was developed. The model includes melt convection, solute effects, thermal conduction in the ampule, melt, and crystal, and the determination of the curved moving crystal-melt interface. The key to the numerical method is the use of a nonuniform computational mesh which moves with the interface, so that the interface is a mesh surface. In addition, implicit methods are used for advection and diffusion of heat, concentration, and vorticity, for interface movement, and for internal gracity waves. This allows large time-steps without loss of stability or accuracy. Numerical results are presented for the interface shape, temperature distribution, and concentration distribution, in steady-state crystl growth. Solutions are presented for two test cases using water, with two different salts in solution. The two diffusivities differ by a factor of ten, and the concentrations differ by a factor of twenty.

Roberts, G. O.↗