SEARCH · Search NASA

Results for “surface planarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Structure and Dynamics of Aqueous Electrolytes Confined in 2D-TiO 2 /Ti 3 C 2 T 2 MXene Heterostructures

The synthesis of heterostructures of different two-dimensional (2D) materials offers an approach to combine advantages of different materials constituting the heterostructure and ultimately enhance their performance for applications such as electrochemical energy storage, achieving high energy, and high-power densities. Understanding the behavior of ions and solvents in confinement between these dissimilar layers is critical to understand their performance and control. Considering aqueous electrolytes, we explore the heterostructure of 2D lepidocrocite-type TiO 2 (2D-TiO 2 ) and hydroxylated or O-terminated Ti 3 C 2 MXene using ReaxFF molecular dynamics simulations and elastic/quasielastic neutron scattering techniques. Simulating a bilayer water intercalation, we find that the extent of interlayer hydration is impacted most by the surface terminations on the MXene and is marginally affected by 2D-TiO 2 . However, the introduction of 2D-TiO 2 decreases the water self-diffusion due to the notch sites (i.e., surface oxygen ridges) entrapping water molecules. Intercalating alkali cations into the heterostructures, we find that Li + is predominantly adsorbed at the 2D-TiO 2 surface instead of the MXenes with the preferential occupation of the notch sites. In contrast, Na+ forms a planar solvation with water, while K + is adsorbed both at the O-terminated MXene and 2D-TiO 2 . This behavior is altered when OH-terminated MXene is involved—the repulsion from the protons on the MXene surface forces the K + ions to be adsorbed exclusively to 2D-TiO 2 , while Na + retains some of its solvation in the water layer due to its smaller size. In OH-terminated MXenes, we see a consistent transfer of protons from the MXene surface toward 2D-TiO 2 , implying a greater capacity to store protons in the heterostructures. Of the three cations simulated, Na + hinders the proton migration the least and Li + the most because of its position near the 2D-TiO 2 surface. Furthermore, 2D-TiO 2 /MXene heterostructures are likely to exhibit a higher energy density but lower power density, especially with Na + intercalation.

25 ENERGY STORAGE↗

NASA NTRSDate not supplied

Flow Visualization for Plume-Surface Interaction Testing Within Large-Scale Vacuum Environments at Conditions Relevant to Lunar and Martian Landers

Interactions between rocket exhaust plumes and the landing surface during powered spacecraft descent on the Moon and Mars pose significant risks to the landing vehicle, landing site, and nearby infrastructure. Understanding the underlying plume-surface interaction phenomena through ground test data can provide critical insights on the sensitivities of parameters such as the spacecraft altitude and thrust. In the present work, we summarize a scaled ground test recently conducted within a 20-ft vacuum chamber environment located in the historical East Test Area at the NASA Marshall Space Flight Center. The ground test featured a Mach 5.3 inert gas plume impinging upon an instrumented flat plate. Planar laser-induced fluorescence, which is a 2D laser-based flow field measurement technique, was performed at this test area for the first time to visualize salient flow features such as the barrel shock, stagnation shock, and wall jet. Measurements were obtained at discrete lander altitudes, made dimensionless using the nozzle exit diameter, corresponding to h/D = 10, 8, 5, 4, 3, and 2. The stagnation pressures of the plume were varied from approximately 0.04 to 1 MPa, providing sensitivity to the engine thrust of a powered spacecraft. The unique test facility allowed for near-lunar conditions to be obtained at initial vacuum chamber pressures less than 0.1 Pa. Martian-relevant measurements were also performed at ambient pressures near 600 Pa. Furthermore, a third set of measurements were obtained at so called lunar-relevant conditions near 3 Pa chamber pressure

Plume Surface Interaction↗

NASA NTRSDate not supplied

Flow Visualization for Plume-Surface Interaction Testing Within Large-Scale Vacuum Environments at Conditions Relevant to Lunar and Martian Landers

Plume Surface Interaction↗

NASA NTRS2001

A Study of the Electrostatic Interaction Between Insulators and Martian/Lunar Soil Simulants

Using our previous experience with the Mars Environmental Compatibility Assessment (MECA) electrometer, we have designed a new type of aerodynamic electrometer. The goal of the research was to measure the buildup of electrostatic surface charge on a stationary cylindrical insulator after windborne granular particles have collided with the insulator surface in a simulated dust storm. The experiments are performed inside a vacuum chamber. This allows the atmospheric composition and pressure to be controlled in order to simulate the atmospheric conditions near the equator on the Martian surface. An impeller fan was used to propel the dust particles at a cylindrically shaped insulator under low vacuum conditions. We tested the new electrometer in a 10 mbar CO2 atmosphere by exposing two types of cylindrical insulators, Teflon (1.9 cm diameter) and Fiberglass (2.5 cm diameter), to a variety of windborne granular particulate materials. The granular materials tested were JSC Mars-1 simulant, which is a mixture of coarse and fine (<5microns diameter) particle sizes, and some of the major mineral constituents of the Martian soil. The minerals included Ottawa sand (SiO2), iron oxide (Fe2O3), aluminum oxide (Al2O3) and magnesium oxide (MgO). We also constructed a MECA-like electrometer that contained an insulator capped planar electrode for measuring the amount of electrostatic charge produced by rubbing an insulator surface over Martian and lunar soil simulants. The results of this study indicate that it is possible to detect triboelectric charging of insulator surfaces by windborne Martian soil simulant, and by individual mineral constituents of the soil simulant. We have also found that Teflon and Fiberglass insulator surfaces respond in different ways by developing opposite polarity surface charge, which decays at different rates after the particle impacts cease.

Mantovani, James G.↗

NASA NTRS1993

Evaluation of frequency-selective reflector antenna systems

The performance of a four-frequency (S/X/Ku/Ku bands) frequency-selective surface (FSS) with double-ring elements (the type of geometry particularly well suited for the circular polarization requirement of the NASA's Cassini project) is evaluated for a planar and a curved FSS subreflector in a dual reflector antenna system. Good agreement is obtained between the calculated and measured data for the planar FSS model. The FSS effects in a four-frequency Cassegrain reflector antenna were accurately evaluated by taking into account the surface curvature and the FSS subreflector's transmitted/reflected field variation as functions of the polarization and the incident angles with respect to the local coordinates.

Wu, T. K.↗

DOE OSTI2026

Towards Spatial Control of Reaction Selectivity on Photocatalysts using Area Selective Atomic Layer Deposition on Model Dual Site Electrocatalyst Platform

Photocatalytic water splitting is a promising route to low-cost H2; however, this approach is currently limited by solar-to-hydrogen (STH) conversion efficiencies in the sub-10% range. Z-scheme water splitting, in which H2 and O2 evolving particles are operated in separate compartments and electronically coupled by a soluble redox mediator, offers improvements in STH efficiency but introduces high rates of undesired side and back reactions. Nanoscopic oxide coatings (e.g., CrOx, and SiOx) have previously been used to selectively block undesired reactants from reaching active sites; however, a coating encapsulating the entire photocatalyst particle limits activity as the particle can no longer facilitate both half reactions. In contrast to photodeposition, which may produce non-uniform overlayers due to the difficulty of controlling local electrochemical reactivity on the surface, area-selective atomic layer deposition (AS-ALD) can be used to deposit conformal ultrathin oxide coatings while preserving access to non-growth areas of a substrate surface. To develop this technique for Z-scheme photocatalysts, we performed AS-ALD of TiO2 on a dual site planar electrocatalyst based on interdigitated arrays of Pt and Au. Self-assembled monolayers of 1-octadecanethiol (ODT) were used to block growth on the Au array, resulting in a patterned surface in which only the Pt sites were encapsulated with TiO2. These electrocatalysts demonstrated localized reaction selectivity for hydrogen evolution reaction (HER) over the TiO2/Pt sites, while the uncoated Au sites retained activity towards Fe(II)/Fe(III) redox (FeRR). Under independent potential control, these microelectrodes showed that selectively deposited TiO2 coatings can suppress the rate of back reactions on neighboring active sites by an order of magnitude compared to uncoated control samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRSDate not supplied

Flow Visualization of Intrusive and Non-Intrusive Configurations for Lunar- and Martian-Relevant Plume-Surface Interaction

Flow visualization of a heated, inert-gas plume impinging onto a rigid surface was performed in lunar- and Martian-relevant pressure conditions. The experimental campaign was part of a broader effort to improve predictive models and capabilities for plume-surface interactions in spacecraft landing environments relevant to the Moon and Mars. The experiments used the planar laser induced fluorescence (PLIF) technique to visualize the flow of the jet over both a full-plane configuration using a flat impingement plate and a half-plane configuration where the jet flow was bisected by a splitter edge mounted to the impingement plate. The latter configuration has been previously used to study erosion mechanisms in plume-surface interactions because the technique enables cross-sectional optical access for visualizing the plume-induced crater. However, this approach has some uncertainty regarding the influence of the splitter edge on the flow field. The present work evaluates the differences in flow structures and characteristics between the flat plate and splitter plate experimental configurations at eight unique test conditions with and without the splitter edge where the vacuum chamber pressure, nozzle mass flow rate, and height of the nozzle were varied. Several features are identified which differ between the flat plate and splitter plate comparison cases, and these are summarized in this paper. The results presented provide insights to the differences between intrusive and non-intrusive experimental configurations for plume-surface interaction studies that can be used to further validate predictive models and inform future ground and flight test results.

PLIF↗

NASA NTRSDate not supplied

Flow Visualization of Intrusive and Non-Intrusive Configurations for Lunar- and Martian-Relevant Plume-Surface Interaction

Flow visualization of a heated, inert-gas plume impinging onto a rigid surface was performed in lunar- and Martian-relevant pressure conditions. The experimental campaign was part of a broader effort to improve predictive models and capabilities for plume-surface interactions in spacecraft landing environments relevant to the Moon and Mars. The experiments used the planar laser-induced fluorescence (PLIF) technique to visualize the flow of the jet over both a full-space configuration using a flat impingement plate and a half-space configuration where the jet flow was bisected by a splitter edge mounted to the impingement plate. The latter configuration has been previously used to study erosion mechanisms in plume-surface interactions because the technique enables cross-sectional optical access for visualizing the plume-induced crater. However, this approach has some uncertainty regarding the influence of the splitter edge on the flow field. The present work evaluates the differences in flow structures and characteristics between the flat plate and splitter plate experimental configurations at eight unique test conditions with and without the splitter edge where the vacuum chamber pressure, nozzle mass flow rate, and height of the nozzle were varied. Several features are identified which differ between the flat plate and splitter plate comparison cases, and these are summarized in this paper. The results presented provide insights to the differences between intrusive and non-intrusive experimental configurations for plume-surface interaction studies that can be used to further validate predictive models and inform future ground and flight test results.

PLIF↗

DOE OSTI2024

Orientational analysis of atomic pair correlations in nanocrystalline indium oxide thin films

The application of grazing-incidence total X-ray scattering (GITXS) for pair distribution function (PDF) analysis using >50 keV X-rays from synchrotron light sources has created new opportunities for structural characterization of supported thin films with high resolution. Compared with grazing-incidence wide-angle X-ray scattering, which is only useful for highly ordered materials, GITXS/PDFs expand such analysis to largely disordered or nanostructured materials by examining the atomic pair correlations dependent on the direction relative to the surface of the supporting substrate. A characterization of nanocrystalline In 2 O 3 -derived thin films is presented here with in-plane-isotropic and out-of-plane-anisotropic orientational ordering of the atomic structure, each synthesized using different techniques. The atomic orientations of such films are known to vary based on the synthetic conditions. Here, an azimuthal orientational analysis of these films using GITXS with a single incident angle is shown to resolve the markedly different orientations of the atomic structures with respect to the planar support and the different degrees of long-range order, and hence, the terminal surface chemistries. It is anticipated that orientational analysis of GITXS/PDF data will offer opportunities to extend structural analyses of thin films by providing a means to qualitatively determine the major atomic orientation within nanocrystalline and, eventually, non-crystalline films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1988

Surface and through crack problems in orthotropic plates

The present treatment of the general mode I crack problem in bending- and membrane-loaded orthotropic plates proceeds by formulating the bending problem for a series of planar and through-cracks; by independently varying the six independent constants, the effect of material orthotropy on the stress intensity factor is determined. The surface-crack problem is then formulated by means of the line-spring model, using a transverse-shear theory of plate bending. Attention is given to composite laminates with through-cracks or semielliptic surface cracks. A significant effect is noted for material orthotropy.

Erdogan, F.↗

DOE OSTI2020

High Pressure Infiltration/Expulsion of Aqueous NaCl in Planar Hydrophobic Nanopores

Pressure-driven permeation of water in a poorly wettable material results in a conversion of mechanical work into surface free energy representing a new form of energy storage, or absorption. When water is replaced by a concentrated electrolyte solution, the storage capacity of a nanoporous medium becomes comparable to high-end supercapacitors. The addition of salt can also reduce the hysteresis of the infiltration/expulsion cycle. Our molecular simulations provide a theoretical perspective into the mechanisms involved in the process, and underlying structures and interactions in compressed nanoconfined solutions. Specifically, we consider aqueous NaCl in planar confinements of widths of 1.0 nm and 1.64 nm and pressures of up to 3 kbar. Open ensemble Monte Carlo simulations utilizing fractional exchanges of molecules for efficient additions/removal of ions have been utilized in conjunction with pressure-dependent chemical potentials to model bulk phases under pressure. Confinements open to these pressurized bulk, aqueous electrolyte phases show reversibility at narrow pore sizes and irreversibility in wider ones, consistent with experiment, as well as strong hysteresis at both pore size. The addition of salt results in significant increases in the solid/liquid interfacial tension in narrower pores and associated infiltration and expulsion pressures. Furthermore, these changes are consistent with strong desalination effects at the lower pore size observed irrespective of external pressure and initial concentration.

25 ENERGY STORAGE↗

DOE OSTI2025

Photon-magnon coupling using gain-assisted spoof-localized surface plasmons

Improving the photon-magnon coupling strength can be done by tuning the structure of microwave resonators to better interact with the magnon counterpart. Planar resonators accommodating unconventional photon modes beyond the half- and quarter-wavelength designs have been explored due to their optimized mode profiles and potentials for on-chip integration. Here, we designed and fabricated an actively controlled ring resonator supporting the spoof localized surface plasmons (LSPs), and implemented it in the investigation of photon-magnon coupling for hybrid magnonic applications. We demonstrated gain-assisted photon-magnon coupling with the YIG magnon mode under several different sample geometries. The achieved coupling amplification largely benefits from the high quality factor (Q-factor) due to the additional gain provided by a semiconductor amplifier, which effectively increases the Q-factor from a nearly null state (passive resonance) to more than 1000 for a quadrupole LSP mode. Our results suggest an additional control knob for manipulating photon-magnon coupled systems exploiting external controls of gain and loss.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Molecular Geometry and Electronic Structure of Copper Corroles

Copper corroles are known for their unique multiconfigurational electronic structures in the ground state, which arise from the transfer of electrons from the π orbitals of the corrole to the d-orbital of copper. While density functional theory (DFT) provides reasonably good molecular geometries, the determination of the ground spin state and the associated energetics is heavily influenced by functional choice, particularly the percentage of the Hartree–Fock exchange. Using extended multireference perturbation theory methods (XMS-CASPT2), the functional choice can be assessed. The molecular geometries and electronic structures of both the unsubstituted and the meso-triphenyl copper corroles were investigated. A minimal active space was employed for structural characterization, while larger active spaces are required to examine the electronic structure. The XMS-CASPT2 investigations conclusively identify the ground electronic state as a multiconfigurational singlet (S o ) with three dominant electronic configurations in its lowest energy and characteristic saddled structure. In contrast, the planar geometry corresponds to the triplet state (T o ), which is approximately 5 kcal/mol higher in energy compared to the S o state for both the bare and substituted copper corroles. Notably, the planarity of the T o geometry is reduced in the substituted corrole compared with that in the unsubstituted one. By analyzing the potential energy surface (PES) between the S o and T o geometries using XMS-CASPT2, the multiconfigurational electronic structure is shown to transition toward a single electron configuration as the saddling angle decreases (i.e., as one approaches the planar geometry). Despite the ability of the functionals to reproduce the minimum energy structures, only the TPSSh-D 3 PES is reasonably close to the XMS-CASPT2 surface. Significant deviations along the PES are observed with other functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2000

Acoustic Receptivity of a Blasius Boundary Layer with 2-D and Oblique Surface Waviness

An experimental investigation was conducted to examine acoustic receptivity and subsequent boundary-layer instability evolution for a Blasius boundary layer formed on a flat plate in the presence of two-dimensional (2-D) and oblique (3-D) surface waviness. The effect of the non-localized surface roughness geometry and acoustic wave amplitude on the receptivity process was explored. The surface roughness had a well defined wavenumber spectrum with fundamental wavenumber k (sub w). A planar downstream traveling acoustic wave was created to temporally excite the flow near the resonance frequency of an unstable eigenmode corresponding to k (sub ts) = k (sub w). The range of acoustic forcing levels, epsilon, and roughness heights, DELTA h, examined resulted in a linear dependence of receptivity coefficients; however, the larger values of the forcing combination epsilon dot DELTA h resulted in subsequent nonlinear development of the Tollmien-Schlichting (T-S) wave. This study provided the first experimental evidence of a marked increase in the receptivity coefficient with increasing obliqueness of the surface waviness in excellent agreement with theory. Detuning of the 2-D and oblique disturbances was investigated by varying the streamwise wall-roughness wavenumber a,, and measuring the T-S response. For the configuration where laminar-to-turbulent breakdown occurred, the breakdown process was found to be dominated by energy at the fundamental and harmonic frequencies, indicative of K-type breakdown.

King, Rudolph A.↗

DOE OSTI2021

Symmetry in Seeded Metal Nanocrystal Growth

Symmetry underpins the structure and function of the world around us and is also captured in modern nanomaterials, where changing the symmetry of a nanocrystal or the interparticle spacing and orientation of nanocrystal building blocks in a superlattice can give new function. However, the synthesis and assembly of nanocrystals have been limited largely to simple compositions and structures. It remains a grand challenge to achieve nanocrystals with compositional and structural complexity while maintaining the monodispersity required for their use. This Account will illustrate through recent examples that seeded methods enable the synthesis of compositionally and structurally complex multimetallic crystals with defined and predictable symmetries for applications in plasmonics and catalysis. This outcome arises because the barrier for heterogeneous nucleation (i.e., seeded) is lower than that of homogeneous nucleation, where seeds can serve as preferential sites for the growth of complex structures and crystal phases. Our analysis begins by considering metal overgrowth from single-crystalline seeds of different shapes and symmetries, where the kinetics of adatom addition to seeds relative to their diffusion across seeds accounts for the expressed nanocrystal shapes. These results are then compared to overgrowth from seeds with different internal structures (i.e., planar defects), where the relationships between nanocrystal size and volumetric strain energy and surface energy are discussed. A major finding from this analysis is that often the underlying symmetry of seeds can be predictably transferred to the final crystals during overgrowth processes. Consequences of this finding are the predictable syntheses of crystals with different hierarchies akin to snowcrystals as well as nanocrystals with complex compositions (e.g., quaternary nanoparticles). Yet, there are subtle aspects to seeded growth that pave a path toward examples where nanocrystal symmetry has been reduced compared to the original seeds in a controlled manner. As we found, both the concentrations of metal precursors and capping agents can impact whether symmetry is transferred or reduced during overgrowth. Examples from our laboratory will be placed in context to other reported strategies for symmetry breaking. As will be argued, understanding what conditions favor symmetry preservation versus symmetry reduction during seeded crystal growth is central to accessing next-generation crystal forms. The Account concludes by outlining synthetic challenges associated with forming nanoscale heterostructures with precise 3-D placement of different materials within a given nanocrystal as well as facet control within different material domain and interface engineering. Furthermore, we envision meeting these challenges through regioselective and chemoselective seeded syntheses for which a foundation is outlined herein.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Preliminary benchmarks and analysis of boundary conditions in a trenched microstructured silicon radiation detector

Microstructured neutron detectors have the benefit of enhanced neutron detection efficiency as compared to planar devices, achieved by etching 6 LiF-filled trenches on the top surface of a silicon PIN diode. This sensor geometry results in a complex electric field distribution and depletion characteristics within the diode under reverse bias. For the first time on record, the effects of a fixed oxide charge on the microstructured device depletion characteristics and mobile carrier transport is investigated. Prototype detectors were fabricated with non-conformal surface doping. Capacitance voltage and current voltage measurements were performed for these prototypes and compared with COMSOL Multiphysics simulations. A spectral response from an 241Am alpha particle source was acquired and analyzed. It was found that monoenergetic alpha particles produce three prominent peaks in the pulse height spectrum output by the device. The peaks were confirmed by simulations to correlate with dead layers and incident trajectories into the microstructure. It was also found that significant differences in pulse rise time result, corresponding with events arriving in a low-field region in the fins and a high-field region in the bulk. Geant4 was utilized for radiation transport, interaction modeling, and benchmarking the spectral data. The results of this simulation work provide confidence in the ability to attain and benchmark electrical characteristics and spectral data for semiconductor radiation detectors employing complex microstructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and modeling approaches in 2024. These models characterize both natural and induced fractures in the geothermal reservoir, which consists of crystalline granitic and metamorphic rock approximately 8,000 feet below the ground surface. The dataset includes a reference DFN model from February 2024 that incorporates planar fractures and well trajectories, as well as upscaled permeability, porosity, compressibility, and storage values on specified grids. Additionally, there are models based on new microseismic (MEQ) data from May and July 2024, including fracture planes fitted to the latest MEQ catalog datasets, tensile fractures from hydraulic stimulation, and an alternative connected DFN for modeling purposes. Coordinate data is provided in both global and local frames, with detailed instructions on the transformations used to align with principal stress orientations. The dataset also includes notes and calculation files for estimating fracture sizes and differences between various fracture sets. There are subfolders for Global Coordinates and Local Coordinates. To move from the global to the local coordinate frame, fractures and wells were a) rotated 20 degrees counterclockwise looking down about the global point (335376.400482041, 4263189.99998761, 250.093546450195) to better align with the principal stresses; and b) translated by (-335408.68, -4263010.9, 1150). Upscaled permeability values using the _XYZ suffix show directions with respect to the global XYZ coordinate frame, while those using the _IJK suffix are aligned with local coordinate frame.

15 GEOTHERMAL ENERGY↗

NASA NTRS1983

Acoustic loading in planar networks

The acoustic loading in a complex planar network of ducts is determined by a method in which Green function surface elements are used. The network consists of straight ducts, elbows and branched ducts. A transfer matrix technique is developed in which each duct is treated separately and the matrix of the influence coefficients is transformed to tri-diagonal form allowing efficient inversion.

El-Raheb, M.↗