Search NASA⌕ Search

SEARCH · Search NASA

Results for “technology diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Study of Cathode Gas Diffusion Architecture for Improved Oxygen Transport in Hydroxide Exchange Membrane Fuel Cells

The high pH environment in hydroxide exchange membrane fuel cells (HEMFCs) has the potential to reach lower costs than the current proton exchange membrane fuel cells (PEMFCs), the incumbent technology. A significant difference between HEMFCs and PEMFCs is the location of water production within the cell. In PEMFCs, the water is produced on the cathode, limiting oxygen transport. In HEMFCs, the water is produced on the anode where the fuel is pure hydrogen. This allows the cathode to be optimized for oxygen transport without the presence of excess liquid water. Limiting current analysis, a technique previously used in PEMFCs, is adopted in HEMFCs to evaluate the oxygen mass transport resistances for different sections of the cathode. Through elimination of the microporous layer (MPL), gas diffusion layer (GDL), and traditional flow field and using porous nickel foam for gas distribution, the transport resistance at an operating condition of 150 kPa(g) and with the cell temperature at 80 °C was decreased from 112 s m −1 to 48 s m −1 , effectively halved. The optimal configuration for performance was found with Ni foam and a GDL, eliminating the MPL and traditional flow field, which vastly improved oxygen transport while maintaining adequate electrical contact with the cathode catalyst layer.

25 ENERGY STORAGE↗
DOE OSTI2019

Screening Diffusion of Small Molecules in Flexible Zeolitic Imidazolate Frameworks Using a DFT-Parameterized Force Field

Quantitatively modeling adsorbate diffusion through zeolitic imidazolate frameworks (ZIFs) must account for the inherent flexibility of these materials. Here, the lack of a transferable intramolecular ZIF force field (FF) for use in classical simulations has previously made an accurate simulation of adsorbate diffusion in many ZIFs impossible. We resolve this problem by introducing a density functional theory parameterized force field (FF) for ZIFs named the intraZIF-FF, which includes perturbations to the class I force fields previously used to model ZIFs. This FF outperforms ad hoc force fields at predicting ab initio relative energies and atomic forces taken from fully periodic ab initio molecular dynamics simulations of SALEM-2, ZIF-7, ZIF-8, and ZIF-90. We use the intraZIF-FF to predict the infinite dilution self-diffusion coefficients of 30 adsorbates with molecular diameters ranging from 2.66 to 7.0 Å in these 4 ZIFs. These results greatly increase the number of adsorbates for which accurate information about molecular diffusion in ZIFs is available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Migration Kinetics of Surface Ions in Oxygen-Deficient Perovskite During Topotactic Transitions

Oxygen diffusivity and surface exchange kinetics underpin the ionic, electronic, and catalytic functionalities of complex multivalent oxides. Towards understanding and controlling the kinetics of oxygen transport in emerging technologies, it is highly desirable to reveal the underlying lattice dynamics and ionic activities related to oxygen variation. In this study, the evolution of oxygen content is identified in real-time during the progress of a topotactic phase transition in La 0.7 Sr 0.3 MnO 3-δ epitaxial thin films, both at the surface and throughout the bulk. Using polarized neutron reflectometry, a quantitative depth profile of the oxygen content gradient is achieved, which, alongside atomic-resolution scanning transmission electron microscopy, uniquely reveals the formation of a novel structural phase near the surface. Surface-sensitive X-ray spectroscopies further confirm a significant change of the electronic structure accompanying the transition. The anisotropic features of this novel phase enable a distinct oxygen diffusion pathway in contrast to conventional observation of oxygen motion at moderate temperatures. The results provide insights furthering the design of solid oxygen ion conductors within the framework of topotactic phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of in situ thickness sensor for vapor diffused Nb3Sn films

Fermilab is one of the leaders in development of vapor diffused Nb3Sn films inside niobium cavities. This material has a higher critical temperature (Tc) than niobium, enabling cavity operation at 4.2 K. This higher operational temperature significantly reduces the infrastructure required for cooling compared to 2 K systems, making superconducting radio-frequency (SRF) technology more accessible. Current deposition methods have relied on iterative testing to determine nominal film thickness, a process that can be time-consuming and imprecise. To address this, we are developing a sensor to measure the thickness of Nb3Sn thin film in situ during vapor diffusion. Our design involves the resistance measurement of a thin film of niobium. During coating, the change in resistance reflects the conversion of the film to Nb3Sn, which allows simple integration with the current furnace infrastructure. This sensor would allow real time measurement of the thickness, allowing for increased precision in future depositions.

Howard, K. [Unlisted] (ORCID:0000000325613308)↗
DOE OSTI2026

Development of in situ thickness sensor for vapor diffused Nb3Sn films

Fermilab is one of the leaders in development of vapor diffused Nb3Sn films inside niobium cavities. This material has a higher critical temperature (Tc) than niobium, enabling cavity operation at 4.2 K. This higher operational temperature significantly reduces the infrastructure required for cooling compared to 2 K systems, making superconducting radio-frequency (SRF) technology more accessible. Current deposition methods have relied on iterative testing to determine nominal film thickness, a process that can be time-consuming and imprecise. To address this, we are developing a sensor to measure the thickness of Nb3Sn thin film in situ during vapor diffusion. Our design involves a four-point resistance measurement of a thin film of niobium, inside the coating region. During coating, the change in resistance reflects the conversion of the film from Nb to Nb3Sn, which allows simple integration with the current furnace infrastructure. This sensor would allow real time measurement of the Nb3Sn film thickness, allowing for increased precision in future depositions for cavity applications.

Howard, K. [Chicago U.] (ORCID:0000000325613308)↗
DOE OSTI2023

A conservative Galerkin solver for the quasilinear diffusion model in magnetized plasmas

We propose a conservative Galerkin scheme for the quasilinear model in three-dimensional momentum space and three-dimensional spectral space, with cylindrical symmetry. We construct an unconditionally conservative weak form and use a discretization that preserves conservation properties independent of the wave emission probability. The discrete operators, combined with a consistent quadrature rule, preserve all the conservation laws rigorously. The proposed scheme is quite general: it works for both relativistic and non-relativistic systems, for both magnetized and unmagnetized plasmas, and even for problems with time-dependent dispersion relations. We represent the particle distribution by continuous basis functions and use discontinuous basis functions for the wave spectral energy density, which enables the application of a positivity-preserving technique. We adopt the marching simplex algorithm, designed initially for computer graphics, for numerical integration on the resonance manifold. Furthermore, the numerical examples with a bump-on-tail initial configuration show how the unstable waves produce strong momentum space diffusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Investigation of nanosecond pulsed dielectric barrier discharge using plate-to-plate electrode with asymmetric dielectric arrangement in airflow

Atmospheric pressure dielectric barrier discharge plasma is produced in airflow by applying nanosecond high voltage pulses with peak voltage about 35 kV and rising time about 40 ns on a plate-to-plate electrode arrangement. The effects of airflow rate (0–50 m/s) on the discharge characteristics are investigated under different barrier conditions (the bare anode case and the bare cathode case). For both cases, the breakdown voltage and the time lag increase distinctly and the discharge intensity decreases sharply when the airflow rate increases from 0 to 30 m/s, and then keep almost constant until the airflow rate is further increased to 50 m/s. For the bare anode case (the cathode is covered by dielectric plate), the discharge mode transforms gradually from filamentary to diffuse discharge with the increasing airflow rate. While for the bare cathode case, some micro-discharge channels are still excited, though the discharge becomes more diffuse when the airflow rate is higher than 30 m/s. By acquiring the time-resolved images of the discharge, it is proved that it is the primary discharge which becomes diffuse when airflow is introduced and the following two discharges of the same voltage pulse occur principally at the positions where the primary discharge is more intense. And in both cases, the plasma temperatures are reduced, but the degree is different. All the phenomena can be explained mainly by the variation of the space charge distribution when the airflow is introduced into the discharge gap. And it is indicated that the bare anode case has an advantage in obtaining diffuse discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Transport dynamics of self-consistent, near-marginal drift-wave turbulence. I. Investigation of the ability of external flows to tune the non-diffusive dynamics

The reduction of turbulent transport across sheared flow regions has been known for a long time in magnetically confined toroidal plasmas. However, details of the dynamics are still unclear, in particular, in what refers to the changes caused by the flow on the nature of radial transport itself. In Paper II, we have shown in a simplified model of drift wave turbulence that, when the background profile is allowed to evolve self-consistently with fluctuations, a variety of transport regimes ranging from superdiffusive to subdiffusive open up depending on the properties of the underlying turbulence. In this study, we show that externally applied sheared flows can, under the proper conditions, cause the transport dynamics to be diffusive or subdiffusive

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Pulsed RF schemes for tearing mode stabilization

The RF stabilization of tearing modes with current condensation has the potential to increase stabilization efficiency and loosen power localization requirements. Such benefits stem from the cooperative feedback between the RF deposition and resulting island temperature perturbation governed by diffusion. A self consistent treatment of the damping of an rf ray as it traverses the island shows that low damping scenarios can require unfavorably high powers to overcome initial power leakage and effectively capitalize on the nonlinear effect. In this work it is demonstrated that for such regimes,modulated stabilization schemes can achieve significant improvements in heating and current drive contributions to stabilization for the same average power as a continuous wave scheme. The impact of modulation frequency and duty cycle on the performance is explored, the results of which suggest modulation strategies in which the pulsing periods are kept on the order of a diffusive time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Real-time capable modeling of neutral beam injection on NSTX-U using neural networks

A new model of heating, current drive, torque and other effects of neutral beam injection on NSTX-U that uses neural networks has been developed. The model has been trained and tested on the results of the Monte Carlo code NUBEAM for the database of experimental discharges taken during the first operational campaign of NSTX-U. By projecting flux surface quantities onto empirically derived basis functions, the model is able to efficiently and accurately reproduce the behavior of both scalars, like the total neutron rate and shine through, and profiles, like beam current drive and heating. With this being said, the model has been tested on the NSTX-U real-time computer, demonstrating a rapid execution time orders of magnitude faster than the Monte Carlo code that is well suited for the iterative calculations needed to interpret experimental results, optimization during scenario development activities, and real-time plasma control applications. Simulation results of a proposed design for a nonlinear observer that embeds the neural network calculations to estimate the poloidal flux profile evolution, as well as Z eff and fast ion diffusivity, are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Tritium adsorption and absorption on (100) and (001) surfaces of pure and tin defective zirconium

Zirconium alloys such as zircaloy-4 are used as tritium (T) getter materials in tritium-producing burnable absorber rods (TPBARs) due to their ability to capture T, thereby forming metal hydrides. Developing an understanding of T adsorption onto zircaloy prior to diffusion into the subsurface is relevant for rational tritium getter and TPBAR design, to improve material properties for nuclear applications. Herein, density functional theory calculations revealed the preferred binding sites for T adsorption on Zr(001) and Zr(100). The energy barriers of T transfer, along the surface and from the surface to the subsurface were computed. The adsorption properties of Zr(001) were found to be superior to those of Zr(100). Surface tin impurities were found to strongly repel T. The presence of subsurface and surface tin resulted in higher absorption energy barriers for both the forward and reverse processes. Based on the calculated energy barriers, a surface to surface T diffusion coefficient of 9.53 × 10 -10 m 2 s -1 is expected for pristine Zr(001). Finally, a surface to subsurface T diffusion coefficient on the order of 10 -13 m 2 s -1 is predicted in pristine Zr, decreasing to 10 -19 m 2 s -1 for the transfer with a subsurface tin impurity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

SiC layer microstructure in AGR-1 and AGR-2 TRISO fuel particles and the influence of its variation on the effective diffusion of key fission products

Tristructural isotropic (TRISO) coated particle fuel is a promising fuel form for advanced reactor concepts such as high temperature gas-cooled reactors (HTGR) and is being developed domestically under the US Department of Energy’s Nuclear Reactor Technologies Initiative in support of Advanced Reactor Technologies. The fuel development and qualification plan includes a series of fuel irradiations to demonstrate fuel performance from the laboratory to commercial scale. The first irradiation campaign, AGR-1, included four separate TRISO fuel variants composed of multiple, laboratory-scale coater batches. The second irradiation campaign, AGR-2, included TRISO fuel particles fabricated by BWX Technologies with a larger coater representative of an industrial-scale system. The SiC layers of as-fabricated particles from the AGR-1 and AGR-2 irradiation campaigns have been investigated by electron backscatter diffraction (EBSD) to provide key information about the microstructural features relevant to fuel performance. The results of a comprehensive study of multiple particles from all constituent batches are reported. The observations indicate that there were microstructural differences between variants and among constituent batches in a single variant. Finally, insights on the influence of microstructure on the effective diffusivity of key fission products in the SiC layer are also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Visualization and analysis of coupling between plasmas self-organization and plasma-induced fluid circulation in 1 atm DC glows with liquid anode

The physical processes prevailing when plasma contacts liquid water are poorly understood; however, it is this very interaction that is the basis of new, exciting technologies for water purification, the treatment of cancer and disease and the production of new, high value chemical products. A chief impediment to widespread application of plasmas for the aforementioned applications is scale up and cost. Here we investigate plasma induced flows which facilitate transport of reactivity from the plasma to liquid water at rates much faster than diffusion. We find that this plasma induced motion varies depending on whether or not the plasma is self organized. The insight from this work paves the way to a better understanding of transport and ultimately informing plasma treatment technologies on how to best optimize the rate at which processes such as plasma based water purification occurs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Development of INL Ultrasonic Thermometer

This document summarizes the development at Idaho National Laboratory of an ultrasonic thermometer. The ultrasonic thermometer is a temperature sensor capable of multi-point measurements at very high temperatures with a high level of radiation tolerance. All of the components of the ultrasonic thermometer have been improved over the course of this work. The base technology, a magnetosrictive transducer, has been shown to be highly radiation tolerant. The solenoidal coil used in the transducer has been redesigned to operate at higher frequencies that previously possible. Materials used for the acoustic waveguide (the sensing portion of the device) have been tested and ideal candidates identified. Finally, a solution to the sticking issue (diffusion bonding between the waveguide and a protective sheath) has been developed and tested.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Device physics underlying silicon heterojunction and passivating‐contact solar cells: A topical review

Abstract The device physics of commercially dominant diffused‐junction silicon solar cells is well understood, allowing sophisticated optimization of this class of devices. Recently, so‐called passivating‐contact solar cell technologies have become prominent, with Kaneka setting the world's silicon solar cell efficiency record of 26.63% using silicon heterojunction contacts in an interdigitated configuration. Although passivating‐contact solar cells are remarkably efficient, their underlying device physics is not yet completely understood, not in the least because they are constructed from diverse materials that may introduce electronic barriers in the current flow. To bridge this gap in understanding, we explore the device physics of passivating contact silicon heterojunction (SHJ) solar cells. Here, we identify the key properties of heterojunctions that affect cell efficiency, analyze the dependence of key heterojunction properties on carrier transport under light and dark conditions, provide a self‐consistent multiprobe approach to extract heterojunction parameters using several characterization techniques (including dark J‐V, light J‐V, C‐V, admittance spectroscopy, and Suns‐V oc ), propose design guidelines to address bottlenecks in energy production in SHJ cells, and develop a process‐to‐module modeling framework to establish the module's performance limits. We expect that our proposed guidelines resulting from this multiscale and self‐consistent framework will improve the performance of future SHJ cells as well as other passivating contact‐based solar cells.

Chavali, Raghu V. K.↗